Keep the diving pump slightly and immerse yourself in the pool so that you pull water and possibly Air can escape. It is optimal if the swimmer cable approx. 12 cm is attached to the handle. The pump should be completely in the water. The combination nipple can be connected to diameter 25, 30, 35 mm hose. Now plug the plug into the mains socket. The dirty water pump switch on over the swimmer switch and off the switch -off when the water is dropped. Pull the power plug to switch off. Since the pump has a power of 250 watts, it sucks up. To pump up to the residual water bute, you have to operate the swimmer switch manually. After the mains plug, this means lay the float switch up and fasten. The pump can be pumped out the rest from the pelvis again. The pump is included in the instructions.
eBay