Showing results for "xxx yg"
Results 1 - 40 of 1500+

C734, C736, X734, X736, X738...

Free Shipping
(1) 18 stores C734, C736, X734, X736, X738 (C734A1YG) Yellow Toner Cartridge
This cartridge is designed for producing high-quality images to meet your printing needs. ...
More

YG1 TOOL COMPANY 41449 Cobalt...

$144.76
Zoro YG1 TOOL COMPANY 41449 Cobalt End Mill, Ball, 13/8, 15/8 Cut L
Free Shipping
/yg1-tool-company-41449/3hVklcUlw1FEXU76eOCDKw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2110, Type General Purpose, End Style Ball, Single End, Diameter 13/8 In, Shank Dia. 3/4 In, Length of Cut 15/8 In, Overall Length 41/8 In, Number of Flutes 2, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

RE Audio - XXX15V2D2 (XXX15...

$779.99
Sonic Electronix RE Audio - XXX15V2D2 (XXX15 V2D2), 15in Car Subwoofers
Free Shipping
/re-audio-xxx15v2d2/qTMtj2WKLlK68rDHQrKC4Q==/info
Sonic Electronix
IN_STOCK ( In stock )
Free Shipping
General Features: 15in Dual 2 ohm XXX Series Subwoofer Power Handling: RMS: 2000 watts Dual composite 2-piece cone Rubber surround 3in 8 layer aluminum flat wire voice coil Integrated gasket Tork-Tite terminal FEA-optimized motor structure Vented magnet system Dual progressive spiders Integrated tinsel lead Sensitivity: 85.81dB Top-mount depth: 13.5in Authorized Internet Dealer 1-year Manufacturer's WarrantyT/S Parameters: FS (Free Air Resonance): 19.1 Hz RE (DC Resistance): 4.2 ohms QMS (Mechanical Q Value): 3.62 QES (Electrical Q Value): 0.58 QTS (Total Speaker Q Value): 0.501 VAS (Equivalent Compliance): 207 L (7.61 cu ft.) Xmax (One-Way Linear Excursion): 54 mm Need the Perfect Subwoofer Enclosure? Check out the RE Audio XXX15V2D2 Subwoofer Enclosure Guide
More

YG1 TOOL COMPANY 12426 Cobalt...

$101.19
Zoro YG1 TOOL COMPANY 12426 Cobalt End Mill, Sq End, 1, 17/8 Cut L
Free Shipping
/yg1-tool-company-12426/TfV7CKJeG9vx44-_6j8S_Q==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2051, Type General Purpose, End Style Square End, Double End, Diameter 1 In, Shank Dia. 1 In, Length of Cut 17/8 In, Overall Length 63/8 In, Number of Flutes 4, Non Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

RE Audio - XXX15D4, 15in Car...

$549.97
Sonic Electronix RE Audio - XXX15D4, 15in Car Subwoofers
Free Shipping
/re-audio-xxx15d4-15in/kvRfwflOQj4NjgCLAhMLCQ==/info
Sonic Electronix
IN_STOCK ( In stock )
Free Shipping
Subwoofer Features: 15in Dual 4 ohm XXX Series Car Subwoofer Power Handling: RMS: 2000 watts Impedance: Dual 4 ohm Kevlar reinforced kraft pulp, dual composite 2-piece cone Rubber surround Integrated tinsel leads FEA Optimized motor structure Dual progressive spiders Integrated gasket Tork-Tite terminals 3in 4-Layer aluminum flat wire voice coil Split coil design VMS Vented magnet system Cast aluminum basket Triple stacked magnets Designed specifically for sealed or ported enclosures Proudly made in the USA Authorized Internet Dealer 1-year Manufacturer's warrantyXXX 15in T/S Parameters: Electrical Q Value (Qes): 0.58 Mechanical Q Value (Qms): 3.62 Total Speaker Q Value (Qts): 0.501 Free Air Resonance (Fs): 19.10 Hz Equivalent Compliance (Vas): 207 liters One-Way, Linear Excursion (Xmax):... Less
More

YG1 TOOL COMPANY 02469 Cobalt...

$189.85
Zoro YG1 TOOL COMPANY 02469 Cobalt End Mill, Sq End, 13/4, 3 Cut L
Free Shipping
/yg1-tool-company-02469/BCu2tNcueq8ejYpH6qv3VQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2080, Type General Purpose, End Style Square End, Single End, Diameter 13/4 In, Shank Dia. 11/4 In, Length of Cut 3 In, Overall Length 51/2 In, Number of Flutes 2, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 07445 Cobalt...

$108.86
Zoro YG1 TOOL COMPANY 07445 Cobalt End Mill, Sq End, 11/4, 2 Cut L
Free Shipping
/yg1-tool-company-07445/0u-XMZsbcDuLZlqMTT_QwA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2039, Type General Purpose, End Style Square End, Single End, Diameter 11/4 In, Shank Dia. 11/4 In, Length of Cut 2 In, Overall Length 41/2 In, Number of Flutes 4, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 11402 Cobalt...

$102.76
Zoro YG1 TOOL COMPANY 11402 Cobalt End Mill, Sq End, 29/32, 15/8 Cut L
Free Shipping
/yg1-tool-company-11402/1f0pnn51jTGrhZT1PXCzlg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2050, Type General Purpose, End Style Square End, Single End, Diameter 29/32 In, Shank Dia. 1 In, Length of Cut 15/8 In, Overall Length 57/8 In, Number of Flutes 2, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 0401ATF...

$147.07
Zoro YG1 TOOL COMPANY 0401ATF Carbide Drills,5/8in.,Flu te 325/32in. G9246343
Free Shipping
/yg1-tool-company-0401atf/2ejciCDLWI57aytHOzds4w==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Carbide Drills, Material Carbide, Dimension Type Fractional Inch, Size 5/8 In., Drill Point 140 Degrees , K3040 Grade, Flute Length 325/32 In., Overall Length 619/64 In., Application For Alloy Steels, Prehardened Steel, Cast Iron, Stainless steel
More

YG1 TOOL COMPANY 02443 Cobalt...

$113.20
Zoro YG1 TOOL COMPANY 02443 Cobalt End Mill, Sq End, 11/4, 3 Cut L
Free Shipping
/yg1-tool-company-02443/5yYIH_GCe2c40Yos2hRd5w==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2080, Type General Purpose, End Style Square End, Single End, Diameter 11/4 In, Shank Dia. 1 In, Length of Cut 3 In, Overall Length 51/2 In, Number of Flutes 2, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 01600...

$251.04
Zoro YG1 TOOL COMPANY 01600 Carbide End Mill,Sq,1,11/2 Cut L
Free Shipping
/yg1-tool-company-01600/6qEajQpmLpYPBDKgjE5Mag==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Carbide End Mill, List Number E5020, Type General Purpose, End Style Square, Single End, Diameter 1 In, Shank Dia. 1 In, Length of Cut 11/2 In, Overall Length 4 In, Number of Flutes 2, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 07461 Cobalt...

$144.76
Zoro YG1 TOOL COMPANY 07461 Cobalt End Mill, Sq End, 11/2, 2 Cut L
Free Shipping
/yg1-tool-company-07461/8k-VP2l8sUW6tKmF4Ggp0g==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2039, Type General Purpose, End Style Square End, Single End, Diameter 11/2 In, Shank Dia. 11/4 In, Length of Cut 2 In, Overall Length 41/2 In, Number of Flutes 4, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 41453 Cobalt...

$150.74
Zoro YG1 TOOL COMPANY 41453 Cobalt End Mill, Ball, 13/8, 21/2 Cut L
Free Shipping
/yg1-tool-company-41453/9eAKJiqLii5LOG2PRmkiJw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2110, Type General Purpose, End Style Ball, Single End, Diameter 13/8 In, Shank Dia. 11/4 In, Length of Cut 21/2 In, Overall Length 5 In, Number of Flutes 2, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 11426 Cobalt...

$101.19
Zoro YG1 TOOL COMPANY 11426 Cobalt End Mill, Sq End, 1, 15/8 Cut L
Free Shipping
/yg1-tool-company-11426/BDGxmPKI5kGw8u1zE9sfgw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2050, Type General Purpose, End Style Square End, Single End, Diameter 1 In, Shank Dia. 1 In, Length of Cut 15/8 In, Overall Length 57/8 In, Number of Flutes 2, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 01477 Cobalt...

$195.95
Zoro YG1 TOOL COMPANY 01477 Cobalt End Mill, Sq End, 2, 15/8 Cut L
Free Shipping
/yg1-tool-company-01477/CAmap_mH4JFamgqlDCoy-w==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2030, General Purpose, End Style Square End, End Single, Dimension Type Fractional Inch, Diameter 2 In., Shank Dia. 11/4 In., Length of Cut 15/8 In., Overall Length 41/8 In., Number of Flutes 2, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degrees , Finish Bright, Application For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 01480 Cobalt...

$233.99
Zoro YG1 TOOL COMPANY 01480 Cobalt End Mill, Sq End, 2, 2 Cut L
Free Shipping
/yg1-tool-company-01480/DIX-hk2hmRz7ZuutxvnG8A==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2030, Type General Purpose, End Style Square End, Single End, Diameter 2 In, Shank Dia. 2 In, Length of Cut 2 In, Overall Length 53/4 In, Number of Flutes 2, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 11410 Cobalt...

$101.19
Zoro YG1 TOOL COMPANY 11410 Cobalt End Mill, Sq End, 15/16, 15/8 Cut L
Free Shipping
/yg1-tool-company-11410/GYdxculspfhCDXjNK-Cp-g==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2050, Type General Purpose, End Style Square End, Single End, Diameter 15/16 In, Shank Dia. 1 In, Length of Cut 15/8 In, Overall Length 57/8 In, Number of Flutes 2, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 43461 Cobalt...

$191.88
Zoro YG1 TOOL COMPANY 43461 Cobalt End Mill, Ball, 11/2, 2 Cut L
Free Shipping
/yg1-tool-company-43461/Gn6_i1-uhpKt-IGlZVRLfQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2020, Type General Purpose, End Style Ball, Single End, Diameter 11/2 In, Shank Dia. 11/4 In, Length of Cut 2 In, Overall Length 41/2 In, Number of Flutes 4, Non Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 04481 Cobalt...

$233.99
Zoro YG1 TOOL COMPANY 04481 Cobalt End Mill, Sq End, 2, 2 Cut L
Free Shipping
/yg1-tool-company-04481/HDU8Xef9i-V0CxxK7UdsEg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2032, Type General Purpose, End Style Square End, Single End, Diameter 2 In, Shank Dia. 2 In, Length of Cut 2 In, Overall Length 53/4 In, Number of Flutes 6, Non Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 12410 Cobalt...

$101.19
Zoro YG1 TOOL COMPANY 12410 Cobalt End Mill, Sq End, 15/16, 17/8 Cut L
Free Shipping
/yg1-tool-company-12410/KxzEJ3yz_2yqLUhFhP_gwg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2051, Type General Purpose, End Style Square End, Double End, Diameter 15/16 In, Shank Dia. 1 In, Length of Cut 17/8 In, Overall Length 63/8 In, Number of Flutes 4, Non Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 41435 Cobalt...

$112.23
Zoro YG1 TOOL COMPANY 41435 Cobalt End Mill, Ball, 11/8, 21/4 Cut L
Free Shipping
/yg1-tool-company-41435/OVcinoqW4NLWARBoE43AeQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2110, Type General Purpose, End Style Ball, Single End, Diameter 11/8 In, Shank Dia. 1 In, Length of Cut 21/4 In, Overall Length 43/4 In, Number of Flutes 2, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 41457 Cobalt...

$162.26
Zoro YG1 TOOL COMPANY 41457 Cobalt End Mill, Ball, 11/2, 15/8 Cut L
Free Shipping
/yg1-tool-company-41457/WlF_oju8crGd_SXkfmjWfA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2110, Type General Purpose, End Style Ball, Single End, Diameter 11/2 In, Shank Dia. 3/4 In, Length of Cut 15/8 In, Overall Length 41/8 In, Number of Flutes 2, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 04452 Cobalt...

$110.67
Zoro YG1 TOOL COMPANY 04452 Cobalt End Mill, Sq End, 13/8, 2 Cut L
Free Shipping
/yg1-tool-company-04452/_W2z5aQmGp684EaKEGqynQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2032, Type General Purpose, End Style Square End, Single End, Diameter 13/8 In, Shank Dia. 1 In, Length of Cut 2 In, Overall Length 41/2 In, Number of Flutes 6, Non Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 43445 Cobalt...

$171.31
Zoro YG1 TOOL COMPANY 43445 Cobalt End Mill, Ball, 11/4, 2 Cut L
Free Shipping
/yg1-tool-company-43445/aC-xjr8E55bvgUXfhos6xA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2020, Type General Purpose, End Style Ball, Single End, Diameter 11/4 In, Shank Dia. 11/4 In, Length of Cut 2 In, Overall Length 41/2 In, Number of Flutes 4, Non Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 0321ATF...

$126.48
Zoro YG1 TOOL COMPANY 0321ATF Carbide Drills,1/2in.,Flu te 31/16in. G9246325
Free Shipping
/yg1-tool-company-0321atf/bnT06TuiwMjFw4LQuLDqoQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Carbide Drills, Material Carbide, Dimension Type Fractional Inch, Size 1/2 In., Drill Point 140 Degrees , K3040 Grade, Flute Length 31/16 In., Overall Length 53/8 In., Application For Alloy Steels, Prehardened Steel, Cast Iron, Stainless steel
More

YG1 TOOL COMPANY 41431 Cobalt...

$106.03
Zoro YG1 TOOL COMPANY 41431 Cobalt End Mill, Ball, 11/8, 15/8 Cut L
Free Shipping
/yg1-tool-company-41431/cXVX5DmXWqlInWu1EPIEEA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2110, Type General Purpose, End Style Ball, Single End, Diameter 11/8 In, Shank Dia. 3/4 In, Length of Cut 15/8 In, Overall Length 37/8 In, Number of Flutes 2, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 02435 Cobalt...

$103.80
Zoro YG1 TOOL COMPANY 02435 Cobalt End Mill, Sq End, 11/8, 3 Cut L
Free Shipping
/yg1-tool-company-02435/cxfSfI7Ec_RnbSc02rF4Hg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2080, Type General Purpose, End Style Square End, Single End, Diameter 11/8 In, Shank Dia. 1 In, Length of Cut 3 In, Overall Length 51/2 In, Number of Flutes 2, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 02461 Cobalt...

$153.03
Zoro YG1 TOOL COMPANY 02461 Cobalt End Mill, Sq End, 11/2, 3 Cut L
Free Shipping
/yg1-tool-company-02461/duAvXIaFwrDXo-bv0fWFog==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2080, Type General Purpose, End Style Square End, Single End, Diameter 11/2 In, Shank Dia. 11/4 In, Length of Cut 3 In, Overall Length 51/2 In, Number of Flutes 2, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 0291ATF...

$108.66
Zoro YG1 TOOL COMPANY 0291ATF Carbide Drills,29/64in.,F lute 27/8in. G9246316
Free Shipping
/yg1-tool-company-0291atf/fuT5riHiqIOE_Z6SzM9oXQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Carbide Drills, Material Carbide, Dimension Type Fractional Inch, Size 29/64 In., Drill Point 140 Degrees , K3040 Grade, Flute Length 27/8 In., Overall Length 43/4 In., Application For Alloy Steels, Prehardened Steel, Cast Iron, Stainless steel
More

YG1 TOOL COMPANY 13426 Cobalt...

$111.49
Zoro YG1 TOOL COMPANY 13426 Cobalt End Mill, Sq End, 1, 17/8 Cut L
Free Shipping
/yg1-tool-company-13426/g6Wqz6bOmHfcpUaQ5zTRiw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2053, Type General Purpose, End Style Square End, Double End, Diameter 1 In, Shank Dia. 1 In, Length of Cut 17/8 In, Overall Length 63/8 In, Number of Flutes 4, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 01461 Cobalt...

$132.65
Zoro YG1 TOOL COMPANY 01461 Cobalt End Mill, Sq End, 11/2, 15/8 Cut L
Free Shipping
/yg1-tool-company-01461/hl-cHyAwJnXOy53EUTyCfA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2030, General Purpose, End Style Square End, End Single, Dimension Type Fractional Inch, Diameter 11/2 In., Shank Dia. 11/4 In., Length of Cut 15/8 In., Overall Length 41/8 In., Number of Flutes 2, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degrees , Finish Bright, Application For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 01453 Cobalt...

$115.83
Zoro YG1 TOOL COMPANY 01453 Cobalt End Mill, Sq End, 13/8, 15/8 Cut L
Free Shipping
/yg1-tool-company-01453/iQ-CesJOKqAQmB4l7vSbKQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2030, General Purpose, End Style Square End, End Single, Dimension Type Fractional Inch, Diameter 13/8 In., Shank Dia. 11/4 In., Length of Cut 15/8 In., Overall Length 41/8 In., Number of Flutes 2, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degrees , Finish Bright, Application For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 02477 Cobalt...

$225.60
Zoro YG1 TOOL COMPANY 02477 Cobalt End Mill, Sq End, 2, 3 Cut L
Free Shipping
/yg1-tool-company-02477/kfFUO12MXB2NRcW1qUNT9g==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2080, Type General Purpose, End Style Square End, Single End, Diameter 2 In, Shank Dia. 11/4 In, Length of Cut 3 In, Overall Length 51/2 In, Number of Flutes 2, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 04462 Cobalt...

$132.65
Zoro YG1 TOOL COMPANY 04462 Cobalt End Mill, Sq End, 11/2, 2 Cut L
Free Shipping
/yg1-tool-company-04462/qGB1-A1OiZ2w_XZC98_ZwA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2032, Type General Purpose, End Style Square End, Single End, Diameter 11/2 In, Shank Dia. 11/4 In, Length of Cut 2 In, Overall Length 41/2 In, Number of Flutes 6, Non Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 0361ATF...

$136.49
Zoro YG1 TOOL COMPANY 0361ATF Carbide Drills,9/16in.,Fl ute 31/2in. G9246334
Free Shipping
/yg1-tool-company-0361atf/qe_9rDtTu9Q-YzRiZDq-Jg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Carbide Drills, Material Carbide, Dimension Type Fractional Inch, Size 9/16 In., Drill Point 140 Degrees , K3040 Grade, Flute Length 31/2 In., Overall Length 515/16 In., Application For Alloy Steels, Prehardened Steel, Cast Iron, Stainless steel
More

YG1 TOOL COMPANY 01459 Cobalt...

$128.44
Zoro YG1 TOOL COMPANY 01459 Cobalt End Mill, Sq End, 11/2, 15/8 Cut L
Free Shipping
/yg1-tool-company-01459/qx2StIqppg1NofPv6wgD9w==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2030, General Purpose, End Style Square End, End Single, Dimension Type Fractional Inch, Diameter 11/2 In., Shank Dia. 1 In., Length of Cut 15/8 In., Overall Length 41/8 In., Number of Flutes 2, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degrees , Finish Bright, Application For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 02445 Cobalt...

$113.20
Zoro YG1 TOOL COMPANY 02445 Cobalt End Mill, Sq End, 11/4, 3 Cut L
Free Shipping
/yg1-tool-company-02445/r7YWGDIclUdwY4Ar0n6UhQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2080, Type General Purpose, End Style Square End, Single End, Diameter 11/4 In, Shank Dia. 11/4 In, Length of Cut 3 In, Overall Length 51/2 In, Number of Flutes 2, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

YG1 TOOL COMPANY 04478 Cobalt...

$195.95
Zoro YG1 TOOL COMPANY 04478 Cobalt End Mill, Sq End, 2, 2 Cut L
Free Shipping
/yg1-tool-company-04478/totTw3tissF0pH_BuCxk9Q==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cobalt End Mill, List Number E2032, Type General Purpose, End Style Square End, Single End, Diameter 2 In, Shank Dia. 11/4 In, Length of Cut 2 In, Overall Length 41/2 In, Number of Flutes 6, Non Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degree, Finish Bright, For Mild Steels, Soft to MediumHard Steels, Stainless Steels and NonFerrous Metals
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355