Compare Adtran TSU 600e™ Multiplexer (1202076L1) to Adtran ATLAS™ 800 (1200185L3) Multiplexer

The TSU 600e is the modular, full-featured T1/FT1 Multiplexer designed to support a wide range of end-user applications. Through the six expansion slots on the rear of the TSU 600e, the user has complete flexibility in the type of DTE interfaces required for the T1 application. By supporting up to 24 DTE interfaces, the TSU 600e provides the same functionality as a traditional channel bank, while providing a small form factor and end-user oriented features. The TSU 600e provides complete monitoring and control of internal functions with embedded Simple Network Management Protocol (SNMP) provided through a SLIP interface. ??The TSU 600e has the added benefit of an integrated 10BaseT Ethernet interface. To support critical applications, the TSU 600e also has the capability to support dual redundant power supplies internally. The power supply module is capable of supporting a fully loaded TSU 600e and is hot-swappable. Less

The Quad T1/PRI module combines with other ATLAS components to implement a variety of WAN access products, including a T1 Bandwidth Manager, an ISDN Access Switch, and a Digital Access Cross-Connect System (DACS). The module provides four network ports, each of which can be independently configured to operate in T1 (DS-1 or DSX-1) or Primary Rate ISDN (PRI) modes. ??The Quad T1/PRI module can perform T1 to PRI conversion, translating between the robbed-bit signaling presented in a channelized T1 circuit and the D-channel signaling of a PRI circuit. When using the Quad T1/PRI module, ATLAS operates in a DACS mode supporting DS0 time slot interchange and DS0 grooming while preserving robbed bit signaling. ATLAS can be fully populated with Quad T1/PRI modules to support a pure DACSing application of 34 T1 circuits. Configuration of the Quad T1/PRI module can be accomplished through a variety of mechanisms, including Telnet or VT 100 Emulation. SNMP management is supported for alarm an... Less