Featured Item
|
Features Drives from 1 1/2" to 2" L shape cleat nails, Strong, lightweight, die-cast aluminum...
More
Features Drives from 1 1/2" to 2" L shape cleat nails, Strong, lightweight, die-cast aluminum construction, Non-marring base is designed to allow driving of fastener close to wall, Better balance for stability - tool sits upright for smoother floor installation, Rear-load gravity feed magazine with
Minimize
|
|
Featured Item
|
Pneumatic mini drill ideal for general drilling, honing, reaming and hole sawing Compact,...
More
Pneumatic mini drill ideal for general drilling, honing, reaming and hole sawing Compact, lightweight, easy to use design; non-reversible Long-lasting planetary gearing and brass bushings; double bearing spindle for low run out Includes 1/4-inch Jacob's chuck Free speed 2,800 RPM, Manufacturer:
Minimize
|
|
Featured Item
|
Pneumatic Coil Roofing Nailer, Fastener Range 3/4" - 1-3/4", Load Capacity 120 Nails, Weighs Just...
More
Pneumatic Coil Roofing Nailer, Fastener Range 3/4" - 1-3/4", Load Capacity 120 Nails, Weighs Just 4.8 LBS, 410 Inch LBS Of Driving Power, Quick Set Adjustable Depth Control, Full Round Driver For More Consistent Flush Drive, Body & Magazine Wear Guards, P STANLEY BOSTITCH Model#RN46-1
Minimize
|
|
Featured Item
|
Ultra-quiet rear exhaust directs air away from user Afjustable high/low power switch for depth...
More
Ultra-quiet rear exhaust directs air away from user Afjustable high/low power switch for depth control and longer life Lightweight, durable aluminum housing with rugged Bostitch industrial design Side load magazine holds up to 200 pins Accepts 23 gauge headless pins from 1/2" to 1 3/16",
Minimize
|
|
Featured Item
|
2.6 SCFM delivered @90 PSI pump, 6.0 gallon tank and 150 max PSI enables more nails to be fired and...
More
2.6 SCFM delivered @90 PSI pump, 6.0 gallon tank and 150 max PSI enables more nails to be fired and provides quicker recovery Durable oil free pump provides extended maintenance-free operation Easy to carry compressor, only 34 lbs Nailer features include adjustable depth-of-drive, jam release
Minimize
|
|
Featured Item
|
Porter-Cable BN125A Factory- Reconditioned 18 Ga., 1 1/4" Brad Nailer Kit. Features Uses standard...
More
Porter-Cable BN125A Factory-Reconditioned 18 Ga., 1 1/4" Brad Nailer Kit. Features Uses standard 18 Ga. brads from 5/8" to 1 1/4, Special hardened driver blade, Tool-free jam release mechanism designed not to block line of sight, Sequential fire trigger, Strong and light weight die-cast aluminum
Minimize
|
|
|
High torque drill ideal for heavy drilling, reaming and hole sawing. 500 rpm free speed. Teasing...
More
High torque drill ideal for heavy drilling, reaming and hole sawing. 500 rpm free speed. Teasing throttle for precise control. Handle exhaust. Needle bearing gearing for improved durability. Tools->Mechanics Tools->Automotive Air Tools
Minimize
|
|
|
Compact low profile head for drilling in confined areas * Convenient reverse valve for simple...
More
Compact low profile head for drilling in confined areas * Convenient reverse valve for simple directional changes * Rear exhaust directs air away from the workpiece * Teasing throttle for control from start-up thru run down Applications: screwdriving * drilling in hard to reach areas Free Speed:
Minimize
|
|
|
Clipped head nailers provide all the important features you want at an affordable price. These...
More
Clipped head nailers provide all the important features you want at an affordable price. These compact framers are easy to handle, and easy on the arm. Their 30° short, in-line magazines provide excellent maneuverability and line of sight. These powerful framers drive a wide range of fasteners in
Minimize
|
|
|
High quality chro-moly alloy steel. Molded cases feature removeable top for use as a tool box tray....
More
High quality chro-moly alloy steel. Molded cases feature removeable top for use as a tool box tray. Includes 1/2" Drive Sockets: 1/4" to 3/4" & 6mm to 19mm Includes Molded case. Lifetime Warranty, Weight: 7 lbs., Manufacturer: Grey Pneumatic
Minimize
|
|
|
Pneumatic mini drill ideal for general drilling, honing, reaming and hole sawing Reversible design...
More
Pneumatic mini drill ideal for general drilling, honing, reaming and hole sawing Reversible design for increased versatility; compact, lightweight, and easy to use Long-lasting planetary gearing and brass bushings; 1/4 HP motor Includes 1/4-inch Jacob's chuck and 3/8-inch spindle Free speed 2,800
Minimize
|
|
|
3/8-inch heavy duty reversible air drill ideal for screw-driving, honing, and heavy drilling...
More
3/8-inch heavy duty reversible air drill ideal for screw-driving, honing, and heavy drilling Teasing throttle for precise control Oil-free operation Handle exhaust reduces noise and directs air away from operator and workplace Delivers free speed of 2,600 RPM, Manufacturer: Chicago Pneumatic
Minimize
|
|
|
3/8-inch heavy duty reversible air drill ideal for small hole drilling and aluminum work Teasing...
More
3/8-inch heavy duty reversible air drill ideal for small hole drilling and aluminum work Teasing throttle for precise control Oil-free operation Handle exhaust reduces noise and directs air away from operator and workplace Delivers 30 ft./lbs. of torque with free speed of 2,600 RPM, Manufacturer:
Minimize
|
|
|
The latest CP Mini drill not only has the same great power and reversible feature as the 7300R, but...
More
The latest CP Mini drill not only has the same great power and reversible feature as the 7300R, but now you have the maximum ease of use with a keyless chuck. Planetary gearing and brass bushings for great durability, this will be the last small drill you will ever need. With directional exhaust
Minimize
|
|
|
Chicago Pneumatic is pleased to introduce the reversible CP7300R 1/4" Drill. Not only does it have...
More
Chicago Pneumatic is pleased to introduce the reversible CP7300R 1/4" Drill. Not only does it have the same great power as the CP7300, but now you can reverse it. With planetary gearing and brass bushings for great durability, this will be the last small drill you will ever need. With directional
Minimize
|
|
|
|
|
|
|
|
|
Teasing throttle for precise control * Handle exhaust reduces noise and directs air away from...
More
Teasing throttle for precise control * Handle exhaust reduces noise and directs air away from operator and workplace * Needle bearing gearing for improved durability * Oil free operation Applications: small hole drilling * aluminum work Free Speed: 2600 rpm.
Minimize
|
|
|
Maximum Free Speed 9000 RPM! Square Driver - 3/8" Air Consumption - 3CFM Maximum Torque -...
More
Maximum Free Speed 9000 RPM! Square Driver - 3/8" Air Consumption - 3CFM Maximum Torque - 120FT/LBS, Manufacturer: Pitbull
Minimize
|
|
|
Features 18 GA. BRAD NAILER6 GAL. PANCAKE COMPRESSOR</B, 10 Amp, 120 VAC, 2 HP Peak, .8 HP running,...
More
Features 18 GA. BRAD NAILER6 GAL. PANCAKE COMPRESSOR</B, 10 Amp, 120 VAC, 2 HP Peak, .8 HP running, Oil-free design for less maintenance, Ability to run on standard household current, 3.7 SCFM @ 40 PSI - 2.6 SCFM @ 90 PSI. Includes Nailer #BN200A, Compressor, 25' air hose (300 PSI) with ferrules on
Minimize
|
|
|
|
|
|
|
|
|
18 Gauge 1-1/4" Brad Nailer Kit 5/8" To 1-1/4" Long Brad Nails Includes: Carrying Case, 1000 Nails,...
More
18 Gauge 1-1/4" Brad Nailer Kit 5/8" To 1-1/4" Long Brad Nails Includes: Carrying Case, 1000 Nails, Safety Glasses, Manual.
Minimize
|
|
|
Enough power to handle the toughest applications. 360 exhaust port. Trigger lock off. Indexed depth...
More
Enough power to handle the toughest applications. 360 exhaust port. Trigger lock off. Indexed depth setting. Integrated and reversible belt hook. Dual low nail indicator. Over-molded contact trip. Quick release jam clear. For paneling, interior and exterior trim, mouldings, cabinet work, and
Minimize
|
|
|
|
|
|
Porter-Cable CFNBNSR Factory- Reconditioned Finish Nailer / Brad Nailer / Stapler / Compressor...
More
Porter-Cable CFNBNSR Factory-Reconditioned Finish Nailer / Brad Nailer / Stapler / Compressor Combo Kit. Features BRAD AND FINISH NAILERS Brad nailer kit (BN125A): Uses 18 gauge 5/8" to 1 1/4" brad nails Finish nailer kit (FN250B): Uses 16 gauge 3/4" to 2 1/2" finish nails Features include
Minimize
|
|
|
Porter-Cable CFBN125B Factory- Reconditioned 1-1/4" Brad Nailer and Compressor Combo Kit. Features...
More
Porter-Cable CFBN125B Factory-Reconditioned 1-1/4" Brad Nailer and Compressor Combo Kit. Features 18 GA. BRAD NAILER Uses standard 18 Ga. Brad nails from 5/8" to 1-1/4 Special hardened driver blade allows for maximum durability and reliability Tool free jam release mechanism designed not to block
Minimize
|
|
|
Designed for 1/2" drive ratchet, breaker bar or impact driver Sockets feature a 6-point design for...
More
Designed for 1/2" drive ratchet, breaker bar or impact driver Sockets feature a 6-point design for a more secure fit Blow molded case keeps the tools organized and easy to transport Blow molded case for storage. Weight 15 lbs.
Minimize
|
|
|
Extreme work calls for extreme tools, and the FinishPro 42XP is this tool! Replacing the work horse...
More
Extreme work calls for extreme tools, and the FinishPro 42XP is this tool! Replacing the work horse FinishPro 41XP, the FinishPro 42XP has been redesigned with a new long life driver, new mainbody with improved durability, improved trigger ergonomics with reduced trigger reach. All backed by
Minimize
|
|
|
Adjustable belt clip Integrated rubber grip for improved comfort Low nail reload indicator Special...
More
Adjustable belt clip Integrated rubber grip for improved comfort Low nail reload indicator Special harden driver blade Strong & lightweight die-cast aluminum body, Manufacturer: Porter-Cable
Minimize
|
|
France
Germany
United Kingdom
Australia
USA
