Category

Tools and Accessories
Showing results for "woodturning razor kits"
Results 1 - 40 of 705

Delta 46-461 Reversible NOVA...

$139.99
Tyler Tool Delta 46-461 Reversible NOVA G3-D Woodturning Chuck
+ $6.99 shipping
/delta-46461-reversible/FOLOU8biBxtae2WxeL6-MA==/info
Tyler Tool
Full Brand Warranty, 30 Day Money Back Guarantee & Unrivaled Customer Service. ( In stock )
Reversible NOVA G3-D Woodturning Chuck - 46-461
More

Delta 46-461 Reversible NOVA...

$139.99
CPO Outlets Delta 46-461 Reversible NOVA G3-D Woodturning Chuck
+ $6.99 shipping
/delta-46461-reversible/sgJq7TN5lbKUKE46PE8heQ==/info
CPO Outlets
Full Brand Warranty, 30 Day Money Back Guarantee & Unrivaled Customer Service. ( In stock )
Store not rated
Reversible NOVA G3-D Woodturning Chuck - 46-461
More

Woodturning Talon Chuck By...

$212.95
eBay Woodturning Talon Chuck By Oneway W/ Adaptor
+ $10.30 shipping
/woodturning-talon-chuck/dE3-OwKvgPrZZf3iRpcrLQ==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Talon Chuck Price of chuck includes the proper Taper Lok Adaptor to fit your lathe. Please indicate lathe spindle size when ordering. This snappy little chuck is perfect for lathes with a 16 swing or less. The body diameter of this chuck is 3½ (slightly smaller than the original ONEWAY Chuck ), however, the body design follows that of the STRONGHOLD Chuck . If your lathe is more than a 16 swing, we recommend our Stronghold Chuck . The following features are standard on our chucks: quality m
More

Woodturning 1/2 Round Nose...

$12.95
eBay Woodturning 1/2 Round Nose Scraper M2 Hss 16 L
+ $6.50 shipping
/woodturning-12-round/NJDU8K4Kx6DfkLGyDjgJCQ==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
High Speed M2 Steel 1/2 Round Nosed Scraper.Overall length is 16 long and handle is fitted with brass ferrule. Used for final finish on bowls, boxes etc.This is an excellent and affordable tool by Benjamin's Best. A full line of lathe chisels are available.
More

NOVA Super2 Woodturning Chuck...

$159.99
Home Depot NOVA Super2 Woodturning Chuck (Body Only Kit) 23067
Free Shipping
/nova-super2-woodturning/mG5n2m_1SOyCdM5NBY8FvA==/info
Home Depot
( In stock )
Free Shipping
Shop for Power Tool Accessories at The Home Depot. NOVA SuperNOVA2 23067 Wood Turning Chuck Companion Insert Type is a 4 Jaw self-centering geared chuck, suitable for a wide variety of wood lathes with up to 20 in. swing. Packed with unique NOVA features such as Composite Indexing Back, Auto Stop, Copper composite Jaw Slides, Woodworm Screw and Comfortable T Bar Handle, the SuperNOVA2 Chuck is fully featured and one of the most popular on the market today. Powerful patented Tuff Lock gearing with precise, hardened action delivers incredibly smooth strength for a solid, vibration free performance - you'll find yourself turning longer, more delicate stems and large, uneven and rough work that you couldn't handle before can be turned with greater security. Takes the same accessory range as... Less
More

Weller Tools Woodburning Kit...

Free Shipping
4 stores Weller Tools Woodburning Kit (WSB25WB)
More

1/4 Tool Insert For The...

$9.99
eBay 1/4 Tool Insert For The Hurricane Woodturning Tool Handle - Bowl, Spindle Gouge
+ $4.95 shipping
/14-tool-insert-for-the/AG0AxBhQcy_OThoRFvHs7g==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
This listing is for a 1/4 insert for The Hurricane Woodturning Tool Handle Designed and manufactured here in the USA Brand New This is an insert for 1/4 tools to be used in the Hurricane Woodturning Tool Handle System. Check out the Hurricane Woodturing Handle System in our ebay store. It is one of the finest tool handles available on the market today. As always, we sell direct without a middleman, so the cost to you is much less than other manufacturer's tools. YouTube video coming soon! Che
More

1/2 Tool Insert For The...

$9.99
eBay 1/2 Tool Insert For The Hurricane Woodturning Tool Handle - Bowl, Spindle Gouge
+ $4.95 shipping
/12-tool-insert-for-the/ohAmXhiFgEEhtuYhTDV5kg==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
This listing is for a 1/2 insert for The Hurricane Woodturning Tool Handle Designed and manufactured here in the USA Brand New This is an insert for 1/2 tools to be used in the Hurricane Woodturning Tool Handle System. This is precision manufactured of steel and slips into the Hurricane Handle. Check out the Hurricane Woodturing Handle System in our ebay store. It is one of the finest tool handles available on the market today. As always, we sell direct without a middleman, so the cost to you
More

Proxxon Micro Woodturning...

$232.76
Walmart.com Proxxon Micro Woodturning Lathe
Free Shipping
/proxxon-micro-woodturning/ReULARJDrBMRKjq6C0C4HQ==/info
Walmart.com
( In stock )
Free Shipping
More

Proxxon Micro Woodturning...

$235.00
Home Depot Proxxon Micro Woodturning Lathe MDG 37020
Free Shipping
/proxxon-micro-woodturning/zg65sgDn0tWTF_Msc4iSGQ==/info
Home Depot
( In stock )
Free Shipping
Shop for Power Tools at The Home Depot. Proxxon Micro Woodturning Lathe DB 250. This compact size machine is ideal for turning doll house items such as cups, plates, pots, vases, columns, also for model railroad items including power or signal posts and tanks, doll and marionette limbs. Classical model building items may be turned with ease. Includes one faceplate for larger work pieces and a set of six collets (2 - 3 - 4 - 6 - 8 and 10mm). Overall length 15-3/4 inches by 3-3/4 inch height. Weight: 5.5 pounds
More

Small Elm Bowl Woodturning...

$20.00
Etsy Small Elm Bowl Woodturning with Pyrography-No Limit - 10-07
+ $5.00 shipping
/small-elm-bowl/Y-piJpHk-8chqMPWDoBatA==/info
Etsy
( In stock )
No Limit is a small Elm woodturning measuring about 5 inches in diameter and 1 1/4 inches tall. It has a nice, simple shape and excellent grain character. The underside is decorated with pyrography. It is a whimsical design that just flowed out as I was working on it. I really enjoy working with elm as it is a mostly underappreciated species, maybe because it is so available. We often tend to covet that which is difficult to obtain. However, if you’re willing to consider what’s right beside you, you might find a pleasant treasure such as this piece. When you look at the grain patterns in this wood you can’t help but see the beauty of this “common” material. I hope you enjoy it. Don't forget that you can click on the Zoom in the lower right of any photo to bring up an even larger image to... Less
More

Woodturning Lathe Talon Body...

$151.95
eBay Woodturning Lathe Talon Body Only Chuck By Oneway 2986, Includes Adaptor
+ $8.70 shipping
/woodturning-lathe-talon/J7yDPLSKui5KcpwG8HMBvw==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Talon Body Only Chuck Price includes adaptor for your lathe's spindle size. Please indicate the spindle size you need when ordering. We stock most common sizes, others are available but about one week is added to delivery time. Talon Chuck Body Only Package Do you have extra jaw sets and are sick and tired of changing them? Consider purchasing a bare bones Body Only Package. Accessory jaws can be permanently mounted on these chucks, making changing top jaws a thing of the past. Body only pack
More

Round Carbide Insert Cutter...

$17.55
eBay Round Carbide Insert Cutter For Simple Shear Cutting Finisher Woodturning Tools
+ $4.75 shipping
/round-carbide-insert/DmYu5EqPiL9oWqLbQtiEEg==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Round Carbide Insert Cutter for Simple Shear Cutting Finisher Woodturning Tools Click Photos to Enlarge Click to Enlarge Description Replacement carbide cutter insert for Simple Shear Cutting Finisher, with or without handle. Specifications: 12mm () outside diameter Uses M3.5 x 0.6 x 10mm length screw Please e-mail us with any questions. If you purchase a Simple Wood Turning Tool along with this insert, we will combine shipping. Please wait for a combined invoice. Harrison Specialties LLC Warra
More

Woodturning Lathe 1/2 Spindle...

$16.25
eBay Woodturning Lathe 1/2 Spindle Gouge Length 16 M2 Hss
+ $6.50 shipping
/woodturning-lathe-12/JckqmQmDy8b3_gY9I4JrZg==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Benjamin's Best High Speed Steel 1/2 Spindle Gouge, 16 long. Spindle gouges have shallow flutes and are the tool of choice for finishing spindles. They are also suitable for facing cuts, shallow hollowing, drilling and beading.
More

Woodturning Lathe Stronghold...

$259.95
eBay Woodturning Lathe Stronghold 4 Jaw Chuck By Oneway, Includes Adaptor
+ $11.65 shipping
/woodturning-lathe/HmlwpjHt-CB5xqlN-8HHYg==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Stronghold Chuck Price includes adaptor for your lathe's spindle size. Please indicate the spindle size you need when ordering. We stock most common sizes, other are available but about one week is added to delivery time. Stronghold Chuck This heavy duty chuck is designed for large lathes (16 swing or greater) to provide maximum gripping power ! Chuck is supplied with a mounted set of #2 Jaws The Stronghold Chuck is operated by a key. Key operation provides two major advantages: One handed ope
More

Step Jaws For Hurricane...

$54.39
eBay Step Jaws For Hurricane Htc125 Woodturning 4 Jaw Wood Lathe Chuck
Free Shipping
/step-jaws-for-hurricane/eH28Ytorja8qZxVdCDf6Zw==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Free Shipping
Step Jaws for Hurricane HTC125 Woodturning 4 Jaw Wood Lathe Chuck Features Step jaws with Serrated Grip.These jaws are used in expansion mode for internal holding within a straight wall. Normally, these are used holding small items like a box or lid.only compatible with the Hurricane HTC125.Internal Step Range = 1 1/8 - 2 5/8 Exterior Step Range = 2 1/2 - 4 Details Brand: Hurricane Turning Tools Item Dimensions Weight: 2.00 pounds Manufacturer: Hurricane Turning Tools Part number: Step_Ja
More

Woodturning 2mt Mini Drive...

$14.95
eBay Woodturning 2mt Mini Drive Center
+ $5.80 shipping
/woodturning-2mt-mini/-2cs_twpaPPHSoxVFT7qow==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
With a diameter of only 3/8 this #2MT Mini 4 Prong Drive Center is ideal for turning smaller radius spindles. It also provide easier access to the ends of larger diameter spindles and have many other between center applications. Polished and hardened steel, prongs sharpened for a great grip and control .
More

Hurricane Hss 3/4 Round Nose...

$27.99
eBay Hurricane Hss 3/4 Round Nose Scraper For Woodturning /wood Lathe Tools Hsc34r
+ $4.95 shipping
/hurricane-hss-34-round/QxhqGV0XB4x9oJHLzu1I-w==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Hurricane Turning Tools - 3/4 Woodturning Square Nose Scraper 3/8 Thick Top Quality M2 High Speed Steel (16 Handle Length - 22 Overall Length) Model HSC34R Brand New This is the 3/4 Woodturning Round Nose Scraper made from High Speed Steel. This listing is for the tool with the light Ash Handle Hurricane Turning Tools are made for us in one of the world's largest turning tool factories. They are made out of M2 High Speed Steel for superior edge holding ability and will last 8X longer betwe
More

Hurricane Woodturning Square...

$32.65
eBay Hurricane Woodturning Square Nose Scraper, High Speed Steel, 3/4 Nose
Free Shipping
/hurricane-woodturning/7UC7Hh4Vkd5ZIeSb6X_bhw==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Free Shipping
Hurricane Woodturning Square Nose Scraper, High Speed Steel, 3/4 Nose Features 3/4 Square Nose Scraper 12 Ash Handle Made from High Speed Steel (HSS), Last up to 8X longer than Carbon Steel Details Brand: Hurricane Turning Tools Item Dimensions Weight: 2.00 pounds Manufacturer: Hurricane Turning Tools Part number: HSC_34S Publisher: Hurricane Turning Tools PLEASE READ THE ENTIRE AD The estimated delivery dates are not final, are just an estimation calculated by a program on eBay.Please see t
More

Extended Dovetail Jaws For...

$49.31
eBay Extended Dovetail Jaws For Hurricane Htc100 Woodturning 4 Jaw Wood Lathe Chuck
Free Shipping
/extended-dovetail-jaws/zJvSRlHm687D28bn_c-Kiw==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Free Shipping
Extended Dovetail Jaws for Hurricane HTC100 Woodturning 4 Jaw Wood Lathe Chuck Features They are used in expansion mode for internal holding within a dovetail recess. The dovetail is set away from the flat jaw surface by about 1 inch.This gives you better access to the bottom of the bowl for easier tool work while your bowl is on the lathe.These jaws are only compatible with the HTC100.Exterior Dovetail Range = 1 3/4 - 3 3/4 Exterior Dovetail 2 Range = 1 3/4 - 2 5/8 Details Brand: Hurrica
More

Woodturning 2mt Super 4 Prong...

$17.95
eBay Woodturning 2mt Super 4 Prong Center1 (
+ $5.80 shipping
/woodturning-2mt-super-4/CW_ip1R9-TAulRMgQlhl_A==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
The sharp spurs on these drive centers give a strong bite into wood. The drive center features a spring-loaded center point that simplifies positioning your spindle and retracts to avoid splitting your work when tailstock pressure is applied. 1 diameter, fits #2 MT headstocks .
More

Carbide Insert Cutter For...

$5.95
eBay Carbide Insert Cutter For Woodturning Chisels
+ $1.50 shipping
/carbide-insert-cutter-for/Zbs-llatAf-YGxNOib-5cA==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
This carbide insert, knife, or blade is used on woodturning chisels and other hand tools and power tools. For woodturning it will fit the Ci1 Easy Rougher tool from Easy Wood Tools and is like the Ci1-R4 tool . This insert is 15mm (19/32)x 15mm x 2.5mm (
More

Woodturning Termite...

$92.50
eBay Woodturning Termite Hollowing Tool By Oneway
+ $7.35 shipping
/woodturning-termite/WVcQnXNJfcSy_PVAvQjXoQ==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
The Termite Unprecedented ease in hollowing, finishing, and thin wall turning make this tool a must in every turner's arsenal. Introduction It will allow you to do end grain hollowing faster, deeper, and with more precision than ever before. As a bonus, it's great for finishing cuts on any flat or curved surface, and because it really is an end grain tool, pommels on spindles can be cut so clean it's unbelievable. Use the Termite for the finishing cut and drastically reduce the amount of finish
More

Prox Tech 37020 MICRO...

$326.38
Walmart.com Prox Tech 37020 MICRO woodturning lathe DB 250
Free Shipping
/prox-tech-37020-micro/1wxE0eG_V_ekOK97jhKvag==/info
Walmart.com
( In stock )
Free Shipping
More

Robust 4 Wide Low Profile...

$63.70
eBay Robust 4 Wide Low Profile Woodturning Tool Rest
Free Shipping
/robust-4-wide-low-profile/834aaQrcM-0Sends7Qmejw==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Free Shipping
Robust 4 Wide Low Profile Woodturning Tool Rest Features Low Profile Rest - 4 Wide - 1 Diameter - Standard Post Robust Tool Rest are made from solid steel. Each Tool rest is topped with a hardened steel bar which will not nick, dent and stay stay smooth after years of use.Fits Robust Sweet 16, Independence, Liberty | Oneway 2036, 2016 | Nova DVR, 3000 | Delta 16 | General 16 |Stubby 750, 1000 | Woodfast 16 Lathes Details Brand: Robust Manufacturer: Robust Package Dimensions Height: 1.50 inch
More

wooden Hammer Gavel...

$22.00
Etsy wooden Hammer Gavel woodturning office meeting shop household chairman 20
+ $8.00 shipping
/wooden-hammer-gavel/cUiX7jF18hjuW2Aet0__DA==/info
Etsy
( In stock )
Oak wood gavel handcrafted by me in the foothills of the Appalachian Mountains of North Georgia. Great for use in the office or around the house and shop. Solid wood, Gavel, Hammer, mallet, maybe a nut cracker. Head and handle turned separately then assembled. Has a crack that has been repaired. Finished with oil and Lacquer. Measures: Head is 4x2. Length is 12 1/4 Thank you for looking and your support. #20
More

Large Serrated Jaws For...

$54.39
eBay Large Serrated Jaws For Hurricane Htc125 Woodturning 4 Jaw Wood Lathe Chuck
Free Shipping
/large-serrated-jaws-for/ZHP1WgSSrEh1csn6ywzZjA==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Free Shipping
Large Serrated Jaws for Hurricane HTC125 Woodturning 4 Jaw Wood Lathe Chuck Features Details Brand: Hurricane Turning Tools Item Dimensions Weight: 2.00 pounds Manufacturer: Hurricane Turning Tools Part number: HTC125_Lg_Serrate d_Jaws Publisher: Hurricane Turning Tools One-day Shipping service option includes 1-business day handling If you buy the item today we will ship it tomorrow using One-day Shipping service Shipping Terms:Your order will be processed within 3 to 5 business day after recei
More

Woodturning 2mt Screw Chuck...

$84.95
eBay Woodturning 2mt Screw Chuck By Oneway, Includes 3 Faceplate
+ $5.80 shipping
/woodturning-2mt-screw/8FREo-vWkBaZIcqIyIND2A==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Screw Chuck This nifty little tool is indespensible when turning small items like drawer knobs or chess pieces. The Oneway Screw Chuck was designed in response to a requirement for making small parts. It is especially well suited for projects where holding possibilities are limited. Small parts can be drilled and held with the same screw size that will be used for installing the piece when it is finished! It's design allows the use of any length of slotted, phillips, or square head screw from #
More

Woodturning Oneway Sure Grip...

$54.95
eBay Woodturning Oneway Sure Grip Tool Handle17-1/2l
+ $7.35 shipping
/woodturning-oneway-sure/PMwZ2CPxnNgGWZ2lSq6GCw==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Sure-Grip Tool Handle Please note! Sale is for one (1) handle, photo shows two handles to illustrate the different sized holes on the ends which allow both 1/2 and 5/8 tools to be used Originally inspired by Michael Hosaluk, these handles are extremely comfortable to hold and use. Our heavy duty steel handles are covered in thick plastic for an extremely confortable feel. Two set screws clamp the tool rigidly in place. Our handles are available in two sizes: 17½ Long Tool Handle (approx. we
More

Jumbo / Cole Jaws For...

$99.99
eBay Jumbo / Cole Jaws For Hurricane Htc125 Woodturning 4 Jaw Wood Lathe Chuck
Free Shipping
/jumbo-cole-jaws-for/M0xLKaj5lH_KoiXurbEssw==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Free Shipping
Jumbo / Cole Jaws for Hurricane HTC125 Woodturning 4 Jaw Wood Lathe Chuck Features These jaws are used for gripping the top of a bowl in compression or expansion mode, allowing you to finish the bottom of the bowl.The jaw set comes with 8 buttons which can be placed in the various hole locations to accommodate a variety of bowl sizes.These jaws are only compatible with the HTC125.Diameter = 10 5/8Details Brand: Hurricane Turning Tools Item Dimensions Weight: 5.00 pounds Manufacturer: Hurricane
More

Square Carbide Insert Cutter...

$5.95
eBay Square Carbide Insert Cutter For Woodturning Chisels Easy Wood Tool Ci1
+ $1.50 shipping
/square-carbide-insert/5V0xCK1rZzFmRL9m_io0Rg==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
This square carbide insert, knife, or blade is used on woodturning chisels and other hand tools and power tools. For woodturning it will fit the Ci1 Easy Rougher tool from Easy Wood Tools and is like the Ci1-Sq. carbide tool. These inserts are sharpened to a razor edge on four sides that are perfectly straight with square corners. These cutters are excellent for roughing and applying square inside corners to your turnings. They are 15mm square and 2.5mm thick and can be rotated to a new razor e
More

Hurricane Woodturning...

$27.99
eBay Hurricane Woodturning Standard Skew Chisel, High Speed Steel, 1 Skew
Free Shipping
/hurricane-woodturning/27_p9E5u0SBftYyg_g-ETA==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Free Shipping
Hurricane Woodturning Standard Skew Chisel, High Speed Steel, 1 Skew Features 1 Standard Skew Chisel 12 Ash Handle Made from High Speed Steel (HSS), Last up to 8X longer than Carbon Steel Details Brand: Hurricane Turning Tools Item Dimensions Weight: 2.00 pounds Manufacturer: Hurricane Turning Tools Part number: HSK_1 Publisher: Hurricane Turning Tools One-day Shipping service option includes 1-business day handling If you buy the item today we will ship it tomorrow using One-day Shipping se
More

Woodturning 1/2 Standard Skew...

$12.95
eBay Woodturning 1/2 Standard Skew M2 Hss 15
+ $5.80 shipping
/woodturning-12-standard/5QfsXGEtMmS6R9vQPXVhOg==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Benjamin's Best High Speed Steel 1/2 Standard Skew Chisel - 15 Long. The skew chisel is a very versatile tool used for cutting precise smooth finish surfaces on the outside of spindles. It is also used for cutting vee-grooves and forming beads. It is ideal for facing off the end of cylindrical workpieces and can even be used for shaping shallow concave curves in spindles .
More

Woodturning 3/4 Oval Skew M2...

$13.95
eBay Woodturning 3/4 Oval Skew M2 Hss 16
+ $5.80 shipping
/woodturning-34-oval-skew/6LYM2iHYXk2rCEvAVfP4lQ==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
The skew chisel is a very versatile tool used for cutting precise smooth finish surfaces on the outside of spindles. It is also used for cutting vee-grooves and forming beads. It is ideal for facing off the end of cylindrical workpieces and can even be used for shaping shallow concave curves in spindles.
More

Woodturning Lathe 2 Steel...

$11.95
eBay Woodturning Lathe 2 Steel Faceplate 1x8 Thread
+ $6.50 shipping
/woodturning-lathe-2-steel/86DT58he8O0Bt_cBain_sQ==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
2 Steel Face Plate,1 x 8 tpi mount. Use this spare faceplate for mounting extra bowl blanks. International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost.These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Posted with the eBay Android app
More

Woodturning Lathe 3 Steel...

$16.00
eBay Woodturning Lathe 3 Steel Faceplate 1x8 Thread
+ $6.50 shipping
/woodturning-lathe-3-steel/AmM3XE7hMKUE5QdIYJI6aw==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
3 Steel Face Plate,1 x 8 tpi mount. Use this spare faceplate for mounting extra bowl blanks. International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost.These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Posted with the eBay Android app
More

Simple Hollowing System Fully...

$149.97
eBay Simple Hollowing System Fully Articulating Carbide Woodturning Lathe Vessel Bowl
Free Shipping
/simple-hollowing-system/7h6RmIgYYGBtQ4ubliOgLg==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Free Shipping
The first production run of the second- generation Simple Hollowing System (SHS) is finally completed and they are ready to ship!Here's a video showing how to mount it.This fully articulating hollowing system will fit virtually any lathe with split ways, even mini lathes. Should you have a lathe with a solid bed please let me know and I will see about developing a custom mount for your lathe.This system can be used to turn both the inside and outside of a project. That makes it ideal for turners
More

Woodturning Keyless 2mt Drill...

$32.95
eBay Woodturning Keyless 2mt Drill Chuck
+ $6.50 shipping
/woodturning-keyless-2mt/DK1n_COVjzdyLdcDx36aKA==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Used for grabbing small turnings or pen mandrels on the headstock- or a drill bit in the tailstock. Accepts a 1/4 x 20 draw bolt
More

Woodturning 1-1/2 Round Nose...

$31.50
eBay Woodturning 1-1/2 Round Nose Scraper M2 Hss 20 L
+ $6.50 shipping
/woodturning-112-round/Ju4zgktnX1AjEFdSgGtQIA==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
High Speed M2 Steel 1-1/2 Round Nosed Scraper.Overall length is 20 long and handle is fitted with brass ferrule. The blade is 3/8 thick. Used for final finish on bowls, boxes etc.This is an excellent and affordable tool by Benjamin's Best. A full line of lathe chisels are available.
More
1 2 3 4 5 ... 18 Next  »

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2014 eBay Inc. All Rights Reserved

Advertisement
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe140.sp4-19584
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe140.sp4-19584