Showing results for "woodturning chucks"
Results 1 - 40 of 1500+

Delta Reversible Midi Lathe...

Free Shipping
4 stores Delta Reversible Midi Lathe NOVA Chuck 46-461
The Delta 46-461 Reversible NOVA G3-D Woodturning Chuck for the Midi Lathe ensures proper clamping...
More

Delta 46-461 Reversible NOVA...

$134.99
Walmart.com Delta 46-461 Reversible NOVA G3-D Woodturning Chuck
+ $7.99 shipping
/delta-46461-reversible/8FeYMiGQp4eDIpYRITpD-Q==/info
Walmart.com
IN_STOCK ( In stock )
Delta 46-461. . Features: Auto-stop jaw slides inhibit the widening of the chuck jaws beyond their optimum clamping range insuring the material is properly secured. Anti-release spindle lock is an exclusive DELTA feature that ensures the chuck will stay securely mounted on the lathe during forward and reverse turning applications. Enhanced jaw gearing provides extra smooth jaw movement and increased clamping pressure for maximum material support. Threaded chuck jaws increase surface contact with the material offering more secure clamping.
More

NOVA Chucks SuperNOVA2...

$159.99
Home Depot NOVA Chucks SuperNOVA2 Woodturning Chuck (Body Only Kit) 23067
Free Shipping
/nova-chucks-supernova2/mG5n2m_1SOyCdM5NBY8FvA==/info
Home Depot
IN_STOCK ( In stock )
Free Shipping
Shop for Tools & Hardware at The Home Depot. NOVA SuperNOVA2 23067 Wood Turning Chuck Companion Insert Type is a 4 Jaw self-centering geared chuck, suitable for a wide variety of wood lathes with up to 20 in. swing. Packed with unique NOVA features such as Composite Indexing Back, Auto Stop, Copper composite Jaw Slides, Woodworm Screw and Comfortable T Bar Handle, the SuperNOVA2 Chuck is fully featured and one of the most popular on the market today. Powerful patented Tuff Lock gearing with precise, hardened action delivers incredibly smooth strength for a solid, vibration free performance - you'll find yourself turning longer, more delicate stems and large, uneven and rough work that you couldn't handle before can be turned with greater security. Takes the same accessory range as other... Less
More

Proxxon 27028 Drill Chuck...

Free Shipping
2 stores Proxxon 27028 Drill Chuck with Sliding Sleeve for Tailstock of DB 250 (400627427028)
Chuck and shaft manufactured to the closest tolerances for the best possible balance.,...
More

Fixtures and Chucks for...

$14.73
Walmart.com Fixtures and Chucks for Woodturning: Everything You Need to Know to Secure Wood on Your Lathe
+ $4.97 shipping
/fixtures-and-chucks-for/Qv0pixWReuZSbSvzrz_hAQ==/info
Walmart.com
IN_STOCK ( In stock )
Fixtures and Chucks to Make for Woodturning gathers all the essential information about woodturning chucks and fixtures in one place for the first time, making it more accessible.   More than merely a reference for dedicated turners, this book is designed to help both beginners and advanced turners improve their skills and broaden the range of projects they tackle at the lathe, by presenting a carefully crafted combination of how-to advice and interesting, engaging projects. The book explains how to get the most from commercial chucks, centers, and faceplates. It also shows how readers can make their own - tailoring the wood-holders precisely to the work they want to do.
More

Woodturning Talon Chuck By...

$212.95
eBay Woodturning Talon Chuck By Oneway W/ Adaptor
+ $10.68 shipping
/woodturning-talon-chuck/7uTzRBfeSLD1lXGykW7aJw==/info
eBay
IN_STOCK ( In stock )
Talon Chuck Price of chuck includes the proper Taper Lok Adaptor to fit your lathe. Please indicate lathe spindle size when ordering. This snappy little chuck is perfect for lathes with a 16 swing or less. The body diameter of this chuck is 3½ (slightly smaller than the original ONEWAY Chuck ), however, the body design follows that of the STRONGHOLD Chuck . If your lathe is more than a 16 swing, we recommend our Stronghold Chuck . The following features are standard on our chucks: quality m
More

NOVA 50 mm 2 in. Chuck...

Free Shipping
4 stores NOVA 50 mm 2 in. Chuck Accessory Jaw Set JS50N
More

CafePress Woodturning Black...

$24.00
CafePress.com CafePress Woodturning Black T-Shirt
+ $6.49 shipping
/cafepress-woodturning/vaPDjbvaHv8gwykrJKZGWw==/info
CafePress.com
IN_STOCK ( In stock )
Dark T-shirt100% preshrunk cotton, Charcoal Grey is 50% cotton/50% polyesterCrew NecklineStandard FitMachine Wash Cold
More

Woodturning Body Only Talon...

$149.95
eBay Woodturning Body Only Talon Chuck By Oneway W/ Adaptor
+ $10.68 shipping
/woodturning-body-only/-QqGINsobU5A2RhCqb7Y1A==/info
eBay
IN_STOCK ( In stock )
Talon Chuck, Body Only Price of chuck includes the proper Taper Lok Adaptor to fit your lathe. Please indicate lathe spindle size when ordering. Body only packages do not include top jaws and woodworm Screw This snappy little chuck is perfect for lathes with a 16 swing or less. The body diameter of this chuck is 3½ (slightly smaller than the original ONEWAY Chuck ), however, the body design follows that of the STRONGHOLD Chuck . If your lathe is more than a 16 swing, we recommend our Strong
More

Woodturning 1/2 Chuck Spur By...

$34.50
eBay Woodturning 1/2 Chuck Spur By Oneway 2027b
+ $5.95 shipping
/woodturning-12-chuck/QFDn-5_k8xP5Yn8y-QL5ww==/info
eBay
IN_STOCK ( In stock )
Oneway 1 4-Spur Chuck Drive Center Oneway's 4-Spur Drive Centers are made to fit in all three Oneway chuck models. Rather than dismounting the chuck from the lathe for a quick bit of roughing out or the occasional spindle job, just slip a drive center into the chuck and get to work without delay. Drive centers are available in 1 diameter for heavy work, and 1/2 diameter for easily accessible shaping finishing across the end of a piece. .
More

Proxxon Lathes Three Jaw...

$62.07
Home Depot Proxxon Lathes Three Jaw Chuck for Lathe DB250 27026
Free Shipping
/proxxon-lathes-three-jaw/Mx2I8WtbzdPYp2qcY1_PAg==/info
Home Depot
IN_STOCK ( In stock )
Free Shipping
Shop for Tools & Hardware at The Home Depot. Proxxon precision three jaw chuck redesigned to be used with DB250 number 37020 micro woodturning lathe. Engineered for sizes 1/16 to 1-13/32 in. (1.5 to 32 mm) when reversing the jaws. Very durable, made from high since die cast.
More

Proxxon Drill Chucks & Keys...

$20.90
Home Depot Proxxon Drill Chucks & Keys Drill Chuck with Sliding Sleeve for Tailstock of DB250 27028
+ $5.99 shipping
/proxxon-drill-chucks/DpTZw15yPdOKiYAcY-fHTg==/info
Home Depot
IN_STOCK ( In stock )
Shop for Tools & Hardware at The Home Depot. Proxxon drill chuck for the tailstock for the DB250, number 37020 micro woodturning lathe. Proxxon German precision engineered, clamping capacity 13/64 in. (5 mm). It replaces the live center. The feed movement results from sliding the complete tailstock.
More

Woodturning eBook

$11.69
Kobo eBooks Woodturning eBook
Free Shipping
/woodturning-ebook/cFPPlPCksIzE4OrQ4Tj70w==/info
Kobo eBooks
IN_STOCK ( In stock )
Store not rated
Free Shipping
Buy Woodturning by Hugh O'Neill and Read this Book on Kobo's Free Apps. Discover Kobo's Vast Collection of Ebooks Today - Over 3 Million Titles, Including 2 Million Free Ones!
More

CafePress Woodturning Black...

$24.00
Cafepress.com CafePress Woodturning Black T-Shirt
+ $6.49 shipping
/cafepress-woodturning/03w7YTHf6vEbNSoxfFcxVQ==/info
Cafepress.com
IN_STOCK ( In stock )
Store not rated
Dark T-shirt100% preshrunk cotton, Charcoal Grey is 50% cotton/50% polyesterCrew NecklineStandard FitMachine Wash Cold
More

Woodturning 2mt Screw Chuck...

$84.95
eBay Woodturning 2mt Screw Chuck By Oneway, Includes 3 Faceplate
+ $5.95 shipping
/woodturning-2mt-screw/HRHRe3uEJ_8g9CjZRp5pLg==/info
eBay
IN_STOCK ( In stock )
Screw Chuck This nifty little tool is indespensible when turning small items like drawer knobs or chess pieces. The Oneway Screw Chuck was designed in response to a requirement for making small parts. It is especially well suited for projects where holding possibilities are limited. Small parts can be drilled and held with the same screw size that will be used for installing the piece when it is finished! It's design allows the use of any length of slotted, phillips, or square head screw from #
More

Special Tall Grippers For...

$31.75
eBay Special Tall Grippers For Woodturning Scroll Chucks And Cole Jaws
+ $5.80 shipping
/special-tall-grippers-for/U1bH07_6F2NTTQrvJlD6bQ==/info
eBay
IN_STOCK ( In stock )
Special Tall Grippers for Woodturning Scroll Chucks and Cole Jaws Physical condition: New Operating condition: Perfect These new grippers will allow you to mount bowls and other turnings that could not be mounted using the grippers that come with your chuck and Cole jaws. Before if your bowl had an edge that dropped down it couldn’t be held on the grippers and you’d have to find another way to turn the base or foot. With these grippers you can grip edges that drop down ¾ of an inch and sti
More

CafePress Woodturning Ash...

$19.99
CafePress.com CafePress Woodturning Ash Grey T-Shirt
+ $6.49 shipping
/cafepress-woodturning-ash/K2IWgFy8ME0qvPQ0uk252w==/info
CafePress.com
IN_STOCK ( In stock )
Classic T-Shirt100% preshrunk cotton, Ash Grey is a 90/10 Cotton/Poly Blend6.1 ozTagless, Crew NecklineStandard FitMachine Wash Cold
More

Woodturning 1/2 Chuck Spur By...

$34.50
eBay Woodturning 1/2 Chuck Spur By Oneway 2027b
+ $5.95 shipping
/woodturning-12-chuck/xuZk5eEi3ZPcwXKLzyQ2fA==/info
eBay
IN_STOCK ( In stock )
Oneway 1 4-Spur Chuck Drive Center Oneway's 4-Spur Drive Centers are made to fit in all three Oneway chuck models. Rather than dismounting the chuck from the lathe for a quick bit of roughing out or the occasional spindle job, just slip a drive center into the chuck and get to work without delay. Drive centers are available in 1 diameter for heavy work, and 1/2 diameter for easily accessible shaping finishing across the end of a piece. .
More

Woodturning Keyless 2mt Drill...

$32.95
eBay Woodturning Keyless 2mt Drill Chuck
+ $6.70 shipping
/woodturning-keyless-2mt/DK1n_COVjzdyLdcDx36aKA==/info
eBay
IN_STOCK ( In stock )
Used for grabbing small turnings or pen mandrels on the headstock- or a drill bit in the tailstock. Accepts a 1/4 x 20 draw bolt
More

Woodturning 4 Steel Faceplate...

$19.95
eBay Woodturning 4 Steel Faceplate Screw/chuck W/ 1x8: Tpi
+ $6.70 shipping
/woodturning-4-steel/GrGY4UkzEuWW-M9gP2GcDQ==/info
eBay
IN_STOCK ( In stock )
Product Description Mount your bowls snugly and securely with this dedicated chrome plated 4 Faceplate / Screw Chuck with 3/4 screw 4 counter sink mounting holes. Just mark the center of your blank then screw on the chuck at the marked center then secure with mounting screws. The combination of screw chuck and faceplate mount provides a very safe and secure bowl turning setup. 1 x 8tpi faceplate mount. Includes mounting screws International Buyers – Please Note: Import duties, taxes, and c
More

CafePress Woodturning: Grey...

$24.00
Cafepress.com CafePress Woodturning: Grey T-Shirt
+ $6.49 shipping
/cafepress-woodturning/0p2CSeIFD7IvGwVMcrJh3A==/info
Cafepress.com
IN_STOCK ( In stock )
Store not rated
Classic T-Shirt100% preshrunk cotton, Ash Grey is a 90/10 Cotton/Poly Blend6.1 ozTagless, Crew NecklineStandard FitMachine Wash Cold
More

Chuck Originals Opulent Mens...

$19.97
Tilly's Chuck Originals Opulent Mens 5 Panel Hat Black One Size For Men 233512100
+ $8.00 shipping
/chuck-originals-opulent/AkcbO-EeiF_zAK11xlvnmQ==/info
Tilly's
IN_STOCK ( In stock )
Chuck Originals Opulent 5 panel hat. Allover mixed print with Chuck tag on front. Adjustable faux leather buckle strap at back. Imported.
More

CafePress Woodturning...

$37.99
CafePress.com CafePress Woodturning Sweatshirt
+ $6.49 shipping
/cafepress-woodturning/XrR2MZg_XtY9LFGoFLqH3w==/info
CafePress.com
IN_STOCK ( In stock )
10.1 oz. patented PrintPro® fabric in a 90/10 cotton/polyester blend by HanesStandard fit Crewneck Collar Stretch ribbed cuffs and waistband Machine Washable
More

Woodturning 2mt Live...

$33.95
eBay Woodturning 2mt Live Tailstock Chuck Adaptor
+ $6.70 shipping
/woodturning-2mt-live/DPA3-yvLBvacMBAJ9KrJ8Q==/info
eBay
IN_STOCK ( In stock )
Live Tailstock Chuck Adapter - #2MT tailstock mount, 1 x 8tpi Chuck Mount This unique adapter allows precision centering of spindles or dowels at the tailstock end. Also, it provides the ideal system for the mounting bowls for hollowing; after turning the outside of the bowl blank, turn a tenon on the bowl bottom. Then mount your chuck to the tailstock using this adapter; grabbing the tenon with the chuck while still attached to the faceplate. When the chuck and blank is remounted on the heads
More

Woodturning, Oneway 8 Vacuum...

$195.99
eBay Woodturning, Oneway 8 Vacuum Chuck With Adaptor
+ $13.55 shipping
/woodturning-oneway-8/0ZGAiGvXrARBnXJZk2X60g==/info
eBay
IN_STOCK ( In stock )
Drum Chucks High quality aluminum chucks for all your vacuum turning needs! This is the largest of our Drum Chucks. Due to it's size, it cannot be used on pieces less than 8 in diameter. ONEWAY Drum Chucks are manufactured from a solid block of aluminum. They are non-pourous and will never rust - which is a must for vacuum applications. These chucks are supplied with a ring of neoprene which is applied to the rim of the chuck so it will conform to slightly out of round Machined from solid alum
More

Woodturning Stronghold Body...

$205.95
eBay Woodturning Stronghold Body Only 4 Jaw Chuck By Oneway, Includes Adaptor
+ $10.95 shipping
/woodturning-stronghold/2ygEGzh6o4EWZszWcu-sxQ==/info
eBay
IN_STOCK ( In stock )
Stronghold Chuck Body Only Price includes adaptor for your lathe's spindle size. Please indicate the spindle size you need when ordering. We stock most common sizes, others are available but about one week is added to delivery time. Stronghold Chuck, Body Only This body only chuck dos NOT include the woodwork screw or the #2 jaws usually supplied with the complete package. Use your own Oneway Stronghold Jaws which allows less frequent jaw changing.This heavy duty chuck is designed for large lat
More

NOVA Drill Chucks & Keys 35mm...

$44.98
Home Depot NOVA Drill Chucks & Keys 35mm (1.37 in.) Spigot Chuck Accessory Jaw Set JS-SP35
+ $5.99 shipping
/nova-drill-chucks-keys/4a8wHQE1o5cyP-FCEh_eCQ==/info
Home Depot
IN_STOCK ( In stock )
Shop for Tools & Hardware at The Home Depot. NOVA JS-SP35 35mm (1.37 in.) Spigot Chuck Accessory Jaw Set is an accessory for NOVA Chucks, designed to expand your range and capacity of your standard NOVA Chuck for specific projects and applications. Universally fits to any NOVA Chuck for maximum flexibility, saving money as duplicate accessories are not needed for different NOVA Chucks. The NOVA JS-SP35 35 mm (1.37 in.) Spigot Chuck Accessory Jaw Set is designed to provide a strong contracting grip to unsupported spigot turning applications such as vases and goblets. With a special NOVA Wood Turning Dovetail Profile, designed specifically for maximum strength and holding in Wood Turning, without crushing the wood fibers. These jaws will hold in both the contraction and the expansion modes... Less
More

CafePress Dream about:...

$18.00
Cafepress.com CafePress Dream about: Woodturning Cap
+ $6.49 shipping
/cafepress-dream-about/Ys1ZPNvE2suXfVUwmXpeqQ==/info
Cafepress.com
IN_STOCK ( In stock )
Store not rated
Unstructured 100% brushed cotton canvas Baseball Cap
More

CafePress Woodturning Long...

$29.99
CafePress.com CafePress Woodturning Long Sleeve Dark T-Shirt
+ $6.49 shipping
/cafepress-woodturning/5mQE8rIzEWWMJml4ZJCzfA==/info
CafePress.com
IN_STOCK ( In stock )
Long Sleeve T-Shirt6.1 oz. 100% soft ring spun cottonStandard fitRibbed sleeve cuffsMachine Wash Cold
More

NOVA Drill Chucks & Keys 35mm...

$39.98
Home Depot NOVA Drill Chucks & Keys 35mm (1.37 in.) Bowl Chuck Accessory Jaw Set 6019
+ $5.99 shipping
/nova-drill-chucks-keys/LRflHQiE0FOfRmrjUjjoTg==/info
Home Depot
IN_STOCK ( In stock )
Shop for Tools & Hardware at The Home Depot. NOVA 6019 35 mm (1.37) Bowl Chuck Accessory Jaw Set are an accessory for NOVA Chucks, designed to expand your range and capacity of your standard NOVA Chuck for specific projects and applications. Universally fits to any NOVA Chuck for maximum flexibility, saving money as duplicate accessories are not needed for different NOVA Chucks. The NOVA 6019 35 mm (1.37 in.) Bowl Chuck Accessory Jaw Set Jaw is perfect for smaller bowl work. With a special NOVA Wood Turning Dovetail Profile, designed specifically for maximum strength and holding in Wood Turning, without crushing the wood fibers. These jaws will hold in both the contraction and the expansion modes. Precisely machined from a single solid piece of 1045 high tensile steel for precise closing,... Less
More

Woodturning, Oneway 5-1/2...

$85.95
eBay Woodturning, Oneway 5-1/2 Vacuum Chuck With Adaptor 2979
+ $10.95 shipping
/woodturning-oneway-512/2BqSBU9s8YVvU1aOf3x-Cw==/info
eBay
IN_STOCK ( In stock )
Made by Oneway Manufacturing, the drum chuck provides a holding solution for vacuum chucking. This drum chuck is made out of high quality aluminum and features a self adhesive neoprene seal. The seal is formed to the rounded top edge of the drum chuck with tailstock pressure pushing on the forming plate that is included. To use the Drum Chuck a separate vacuum source is needed as is an adaptor like the E-Z Vacuum Adaptor.The Drum Chuck includes one taperlock insert to fit your lathe spindle thr
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355