Showing results for "woodturning chucks"
Results 1 - 40 of 1500+

Woodturning Talon Chuck By...

$212.95
eBay Woodturning Talon Chuck By Oneway W/ Adaptor
+ $10.71 shipping
/woodturning-talon-chuck/7uTzRBfeSLD1lXGykW7aJw==/info
eBay
IN_STOCK ( In stock )
Talon Chuck Price of chuck includes the proper Taper Lok Adaptor to fit your lathe. Please indicate lathe spindle size when ordering. This snappy little chuck is perfect for lathes with a 16 swing or less. The body diameter of this chuck is 3½ (slightly smaller than the original ONEWAY Chuck ), however, the body design follows that of the STRONGHOLD Chuck . If your lathe is more than a 16 swing, we recommend our Stronghold Chuck . The following features are standard on our chucks: quality m
More

HTC100/125 Woodturning Chuck...

$44.47
Sears Marketplace HTC100/125 Woodturning Chuck Threaded Insert Adapter 1 1/2 x 8-Inch TPI
No Shipping Info
/htc100125-woodturning/SO-S8KNMzmBiXY1-mSrnOw==/info
Sears Marketplace
IN_STOCK ( In stock )
HTC100/125 Woodturning Chuck Threaded Insert Adapter 1 1/2 x 8-Inch TPI - This is a threaded insert / adapter for Hurricane Turning Tools 4 jaw woodturning scroll chucks. These adapters will fit the HTC100 4 Chuck and the massive HTC125 5 Chuck. Your chuck purchase usually comes with one adapter. This listing is for an additional adapter if you need one for another lathe.
More

Special Tall Grippers For...

$31.75
eBay Special Tall Grippers For Woodturning Scroll Chucks And Cole Jaws
+ $5.80 shipping
/special-tall-grippers-for/U1bH07_6F2NTTQrvJlD6bQ==/info
eBay
IN_STOCK ( In stock )
Special Tall Grippers for Woodturning Scroll Chucks and Cole Jaws Physical condition: New Operating condition: Perfect These new grippers will allow you to mount bowls and other turnings that could not be mounted using the grippers that come with your chuck and Cole jaws. Before if your bowl had an edge that dropped down it couldn’t be held on the grippers and you’d have to find another way to turn the base or foot. With these grippers you can grip edges that drop down ¾ of an inch and sti
More

HTC100/125 Woodturning Chuck...

$44.56
Sears Marketplace HTC100/125 Woodturning Chuck Threaded Insert Adapter 1 x 8-Inch TPI
No Shipping Info
/htc100125-woodturning/Y9kxTGT7XUrY6zNYR0TUug==/info
Sears Marketplace
IN_STOCK ( In stock )
HTC100/125 Woodturning Chuck Threaded Insert Adapter 1 x 8-Inch TPI - This is a threaded insert / adapter for Hurricane Turning Tools 4 jaw woodturning scroll chucks. These adapters will fit the HTC100 4 Chuck and the massive HTC125 5 Chuck. Your chuck purchase usually comes with one adapter. This listing is for an additional adapter if you need one for another lathe.
More

Woodturning 2mt Screw Chuck...

$84.95
eBay Woodturning 2mt Screw Chuck By Oneway, Includes 3 Faceplate
+ $5.95 shipping
/woodturning-2mt-screw/GX7B9WXNtaG6gQu6s_Rz6Q==/info
eBay
IN_STOCK ( In stock )
Screw Chuck This nifty little tool is indespensible when turning small items like drawer knobs or chess pieces. The Oneway Screw Chuck was designed in response to a requirement for making small parts. It is especially well suited for projects where holding possibilities are limited. Small parts can be drilled and held with the same screw size that will be used for installing the piece when it is finished! It's design allows the use of any length of slotted, phillips, or square head screw from #
More

Spigot Jaws For Oneway Talon...

2 stores Spigot Jaws For Oneway Talon Chuck - Wood Turning Lathe Chucks
More

HTC125 5 Inches Woodturning 4...

$264.16
Sears Marketplace HTC125 5 Inches Woodturning 4 Jaw Chuck Kit with Dovetail Jaws1 1/2 x 8 Inches TPI
No Shipping Info
/htc125-5-inches/ZHNZjS890A4vX1s5nIupDw==/info
Sears Marketplace
IN_STOCK ( In stock )
HTC125 5 Inches Woodturning 4 Jaw Chuck Kit with Dovetail Jaws1 1/2 x 8 Inches TPI - We would like to introduce you to the Hurricane HTC125 125MM (5) 4 Jaw Self Centering Woodturning Chuck. This is an outstanding quality chuck that compares to some of the famous names on the market. It provides a superb grip on your woodturning projects such as bowls and platters. Many optional jaw sets are available (sold separately) for various woodturning applications. This is a 5 chuck which compares in size to the Vicmarc VM120 chucks. It is recommended for full size lathes only. Please note that this chuck is the larger in size of the two Hurricane chucks. It is perfect for large bowl projects. If you are looking for a smaller chuck for small to medium bowls check out the HTC100 4 Chuck in our... Less
More

Woodturning 3 Steel Faceplate...

$16.95
eBay Woodturning 3 Steel Faceplate Screw/chuck W/ 1x8: Tpi
+ $5.95 shipping
/woodturning-3-steel/Av7xEr82eHOstSSNTm2xDg==/info
eBay
IN_STOCK ( In stock )
Product Description Mount your bowls snugly and securely with this dedicated chrome plated 3 Faceplate / Screw Chuck with 3/4 screw 4 counter sink mounting holes. Just mark the center of your blank then screw on the chuck at the marked center then secure with mounting screws. The combination of screw chuck and faceplate mount provides a very safe and secure bowl turning setup. 1 x 8tpi faceplate mount. Includes mounting screws International Buyers – Please Note: Import duties, taxes, and c
More

HTC100/125 Woodturning Chuck...

$48.98
Sears Marketplace HTC100/125 Woodturning Chuck Threaded Insert Adapter M33 x 3.5mm
No Shipping Info
/htc100125-woodturning/iIe8oNzd5QFFeGeMcd768A==/info
Sears Marketplace
IN_STOCK ( In stock )
Size: M33 x 3.5MM - HTC100/125 Woodturning Chuck Threaded Insert Adapter M33 x 3.5mm - This is a threaded insert / adapter for Hurricane Turning Tools 4 jaw woodturning scroll chucks. These adapters will fit the HTC100 4 Chuck and the massive HTC125 5 Chuck. Your chuck purchase usually comes with one adapter. This listing is for an additional adapter if you need one for another lathe.
More

Woodturning 4 Steel Faceplate...

$19.95
eBay Woodturning 4 Steel Faceplate Screw/chuck W/ 1x8: Tpi
+ $6.70 shipping
/woodturning-4-steel/H70VySWDlbMQPGNch32gww==/info
eBay
IN_STOCK ( In stock )
Product Description Mount your bowls snugly and securely with this dedicated chrome plated 4 Faceplate / Screw Chuck with 3/4 screw 4 counter sink mounting holes. Just mark the center of your blank then screw on the chuck at the marked center then secure with mounting screws. The combination of screw chuck and faceplate mount provides a very safe and secure bowl turning setup. 1 x 8tpi faceplate mount. Includes mounting screws International Buyers – Please Note: Import duties, taxes, and c
More

HTC100 4-Inch Woodturning 4...

$241.45
Sears Marketplace HTC100 4-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 x 8-Inch TPI Spindles
No Shipping Info
/htc100-4inch-woodturning/B-57T4DolzX2sS4RlDQ6CQ==/info
Sears Marketplace
IN_STOCK ( In stock )
Size: 1 x 8 TPI - HTC100 4-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 x 8-Inch TPI Spindles - We would like to introduce you to the Hurricane HTC100 100MM 4 Jaw Self Centering Woodturning Chuck. This is an outstanding quality chuck that compares to some of the famous names on the market. It provides a superb grip on your woodturning projects such as bowls and platters. Many optional jaw sets are available (sold separately) for various woodturning applications. This is a 4 chuck which compares in size to the Oneway Talon Novatech etc chucks. It is a great size for Full-Size / Midi and Mini Lathes. Please note that this chuck is the smaller in size of the two Hurricane chucks. It is perfect if you only want one chuck and you switch between a mini lathe and a... Less
More

Woodturning 2mt Live...

$33.95
eBay Woodturning 2mt Live Tailstock Chuck Adaptor
+ $6.70 shipping
/woodturning-2mt-live/DPA3-yvLBvacMBAJ9KrJ8Q==/info
eBay
IN_STOCK ( In stock )
Live Tailstock Chuck Adapter - #2MT tailstock mount, 1 x 8tpi Chuck Mount This unique adapter allows precision centering of spindles or dowels at the tailstock end. Also, it provides the ideal system for the mounting bowls for hollowing; after turning the outside of the bowl blank, turn a tenon on the bowl bottom. Then mount your chuck to the tailstock using this adapter; grabbing the tenon with the chuck while still attached to the faceplate. When the chuck and blank is remounted on the heads
More

HTC125 5-Inch Woodturning 4...

$264.16
Sears Marketplace HTC125 5-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 1/4 x 8-Inch TPI Spindles
No Shipping Info
/htc125-5inch-woodturning/BMF77f04KT0vJfCRaeV_6g==/info
Sears Marketplace
IN_STOCK ( In stock )
HTC125 5-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 1/4 x 8-Inch TPI Spindles - We would like to introduce you to the Hurricane HTC125 125MM (5) 4 Jaw Self Centering Woodturning Chuck. This is an outstanding quality chuck that compares to some of the famous names on the market. It provides a superb grip on your woodturning projects such as bowls and platters. Many optional jaw sets are available (sold separately) for various woodturning applications. This is a 5 chuck which compares in size to the Vicmarc VM120 chucks. It is recommended for full size lathes only. Please note that this chuck is the larger in size of the two Hurricane chucks. It is perfect for large bowl projects. If you are looking for a smaller chuck for small to medium bowls check out the... Less
More

Woodturning 1/2 Chuck Spur By...

$34.50
eBay Woodturning 1/2 Chuck Spur By Oneway 2027b
+ $5.95 shipping
/woodturning-12-chuck/QFDn-5_k8xP5Yn8y-QL5ww==/info
eBay
IN_STOCK ( In stock )
Oneway 1 4-Spur Chuck Drive Center Oneway's 4-Spur Drive Centers are made to fit in all three Oneway chuck models. Rather than dismounting the chuck from the lathe for a quick bit of roughing out or the occasional spindle job, just slip a drive center into the chuck and get to work without delay. Drive centers are available in 1 diameter for heavy work, and 1/2 diameter for easily accessible shaping finishing across the end of a piece. .
More

HTC125 5-Inch Woodturning 4...

$264.16
Sears Marketplace HTC125 5-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with M33 x 3.5 Spindles
No Shipping Info
/htc125-5inch-woodturning/EeAmzy6ZZ-ns1cWTDOCuWw==/info
Sears Marketplace
IN_STOCK ( In stock )
Size: M33 x 3.5MM - HTC125 5-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with M33 x 3.5 Spindles - We would like to introduce you to the Hurricane HTC125 125MM (5) 4 Jaw Self Centering Woodturning Chuck. This is an outstanding quality chuck that compares to some of the famous names on the market. It provides a superb grip on your woodturning projects such as bowls and platters. Many optional jaw sets are available (sold separately) for various woodturning applications. This is a 5 chuck which compares in size to the Vicmarc VM120 chucks. It is recommended for full size lathes only. Please note that this chuck is the larger in size of the two Hurricane chucks. It is perfect for large bowl projects. If you are looking for a smaller chuck for small to medium bowls... Less
More

Woodturning Keyless 2mt Drill...

$32.95
eBay Woodturning Keyless 2mt Drill Chuck
+ $6.70 shipping
/woodturning-keyless-2mt/DK1n_COVjzdyLdcDx36aKA==/info
eBay
IN_STOCK ( In stock )
Used for grabbing small turnings or pen mandrels on the headstock- or a drill bit in the tailstock. Accepts a 1/4 x 20 draw bolt
More

HTC125 5-Inch Woodturning 4...

$266.77
Sears Marketplace HTC125 5-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 x 8-Inch TPI Spindles
No Shipping Info
/htc125-5inch-woodturning/cyM427Epyc_INwUax6E-Xw==/info
Sears Marketplace
IN_STOCK ( In stock )
HTC125 5-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 x 8-Inch TPI Spindles - We would like to introduce you to the Hurricane HTC125 125MM (5) 4 Jaw Self Centering Woodturning Chuck. This is an outstanding quality chuck that compares to some of the famous names on the market. It provides a superb grip on your woodturning projects such as bowls and platters. Many optional jaw sets are available (sold separately) for various woodturning applications. This is a 5 chuck which compares in size to the Vicmarc VM120 chucks. It is recommended for full size lathes only. Please note that this chuck is the larger in size of the two Hurricane chucks. It is perfect for large bowl projects. If you are looking for a smaller chuck for small to medium bowls check out the... Less
More

HTC100 4-Inch Woodturning 4...

$241.45
Sears Marketplace HTC100 4-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 1/4 x 8-Inch TPI Spindles
No Shipping Info
/htc100-4inch-woodturning/ttExPEseeQLWs5N-yM7vTg==/info
Sears Marketplace
IN_STOCK ( In stock )
Size: 1 1/4 x 8 TPI - HTC100 4-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 1/4 x 8-Inch TPI Spindles - We would like to introduce you to the Hurricane HTC100 100MM 4 Jaw Self Centering Woodturning Chuck. This is an outstanding quality chuck that compares to some of the famous names on the market. It provides a superb grip on your woodturning projects such as bowls and platters. Many optional jaw sets are available (sold separately) for various woodturning applications. This is a 4 chuck which compares in size to the Oneway Talon Novatech etc chucks. It is a great size for Full-Size / Midi and Mini Lathes. Please note that this chuck is the smaller in size of the two Hurricane chucks. It is perfect if you only want one chuck and you switch between a mini... Less
More

Woodturning Oneway 6 Jaws For...

$59.95
eBay Woodturning Oneway 6 Jaws For The Stronghold Chuck 3779
+ $6.70 shipping
/woodturning-oneway-6-jaws/0CP96inFy0359m2AOtLhQA==/info
eBay
IN_STOCK ( In stock )
#6 Jaws for Stronghold Chuck These light alloy #6 Jaws for the Oneway Stronghold Chuck are ideal for holding platters and shallow bowls which have a large foot or recess. Oneway's patented profiled jaw configuration provides maximum gripping power with minimal damage to the piece. Recommended maximum platter size of 36 or a maximum bowl diameter of 26 with a depth of 6.For use on Oneway's Stronghold Chuck only. Canada Specs:External (compression): Minimum - 6-1/8 Maximum - 7-3/8Internal (e
More

Woodturning Oneway 5 Jaws For...

$55.95
eBay Woodturning Oneway 5 Jaws For The Stronghold Chuck 3777
+ $6.70 shipping
/woodturning-oneway-5-jaws/4VJ4kkVVW1XIfi2rs8Wy4g==/info
eBay
IN_STOCK ( In stock )
#5 Jaws for Stronghold Chuck These light alloy #5 Jaws for the Oneway Stronghold Chuck are ideal for holding platters and shallow bowls which have a large foot or recess. Oneway's patented profiled jaw configuration provides maximum gripping power with minimal damage to the piece. Recommended maximum platter size of 36 or a maximum bowl diameter of 26 with a depth of 6. For use on Oneway's Stronghold Chuck only. Canada Specs:External (compression): Minimum - 5-1/8 Maximum - 6-3/8Internal (
More

Step Jaws for HTC100...

$76.49
Sears Marketplace Step Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck
No Shipping Info
/step-jaws-for-htc100/KQuIl12ulT6oglyup_uLxw==/info
Sears Marketplace
IN_STOCK ( In stock )
Step Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck - This listing is for a set of Step jaws with Serrated Grip which are used on the Hurricane HTC100 4 Jaw Woodturning Scroll Chuck. These jaws are used in expansion mode for internal holding within a straight wall. Normally these are used holding small items like a box or lid. These jaws are only compatible with the HTC100.
More

Woodturning, Oneway 2...

$55.95
eBay Woodturning, Oneway 2 Profiled Tower Jaws For Stronghold Chuck 3602
+ $7.55 shipping
/woodturning-oneway-2/UBNSYqZLosyYbNH-pLKYLw==/info
eBay
IN_STOCK ( In stock )
Oneway 3602 #2 Profiled Tower Jaws for Stronghold Chuck External (compression) chucking capacity: 2 to 3-3/8Internal (expansion) chucking capacity: 2-3/4 to 4-1/4Optional accessory for Oneway Stronghold Chuck Made in Canada .
More

Step Jaws for HTC125...

$67.39
Sears Marketplace Step Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck
No Shipping Info
/step-jaws-for-htc125/YsHfEfjk2w4KYDpJIUWU5Q==/info
Sears Marketplace
IN_STOCK ( In stock )
Step Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck - This listing is for a set of Step jaws with Serrated Grip which are used on the Hurricane HTC125 4 Jaw Woodturning Scroll Chuck. These jaws are used in expansion mode for internal holding within a straight wall. Normally these are used holding small items like a box or lid. These jaws are only compatible with the HTC125.
More

Woodturning Big Bite Chuck...

$19.50
eBay Woodturning Big Bite Chuck Spur By Oneway 3946
+ $5.95 shipping
/woodturning-big-bite/90SMfrGK7dScQuDMWxWZjA==/info
eBay
IN_STOCK ( In stock )
Driving large diameter, uneven bowl blanks between centers is easy with the Oneway® Big Bite Chuck Spur. Not only does the 3-1/2 diameter head give you lots of contact, the 2-prong design accommodates natural edge and uneven surfaces with ease. Designed for use in a 4 jaw self-centering chuck, the Big Bite Chuck Spur lets you work rough bowl blanks up to 24 in diameter with confidence. .
More

Large Dovetail Jaws for...

$67.39
Sears Marketplace Large Dovetail Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck
No Shipping Info
/large-dovetail-jaws-for/C9uigKP9yndU3vYE_WRNQw==/info
Sears Marketplace
IN_STOCK ( In stock )
Large Dovetail Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck - This listing is for a set of Large Dovetail jaws which are used on the Hurricane HTC125 4 Jaw Woodturning Scroll Chuck. They can be used in compression mode for gripping a tenon or expansion mode for internal holding within a dovetail recess. These jaws are only compatible with the HTC125. Don't have an HTC125? If you haven't heard of the Hurricane HTC100 4 Woodturning Chuck please check it out in our ebay store. It is a super high quality chuck without the super high price of competitive chucks. Many jaw sets are available and inserts are interchangeable for use on today's most popular lathes.
More

Woodturning Oneway Mini Jumbo...

$86.95
eBay Woodturning Oneway Mini Jumbo Jaws For The Sronghold Chuck 2966
+ $8.95 shipping
/woodturning-oneway-mini/fdjxEiImdlel_FmZiJrLWg==/info
eBay
IN_STOCK ( In stock )
External (compression) chucking capacity: 3 to 8-1/8Internal (expansion) chucking capacity: 5 to 10-1/8Optional accessory for Oneway Stronghold Chuck Made in Canada .
More

Easy Wood Tools, C1000 4 Jaw...

$379.05
eBay Easy Wood Tools, C1000 4 Jaw Easy Chuck, 1 X 8tpi For Woodturning Lathe - Usa
No Shipping Info
/easy-wood-tools-c1000-4/1BrACGbRcKaBSy67veJVFQ==/info
eBay
IN_STOCK ( In stock )
This listing is for a genuine Easy Wood Tools four jaw Easy Chuck stock number C1000 with a 1 x 8TPI internal thread for the lathe spindle . The item is in its original packaging and sent to you in that condition. Easy Wood Tools are 100% Made in the USA and are a work of art in addition to a phenomenal woodturning tool. Tool description from the Easy Wood Tools Marketing Literature: What makes your Easy Chuck the best chuck on the planet? Snap Lock Technology - Easy Jaws snap securely in plac
More

Jumbo/Cole Jaws for HTC125...

$123.66
Sears Marketplace Jumbo/Cole Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck
No Shipping Info
/jumbocole-jaws-for/MvRpOYGpjbjizuvUL_TZRg==/info
Sears Marketplace
IN_STOCK ( In stock )
Jumbo/Cole Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck - This listing is for a set of Jumbo / Cole Jaws which are used on the Hurricane HTC125 4 Jaw Woodturning Scroll Chuck. These jaws are used for gripping the top of a bowl in compression or expansion mode allowing you to finish the bottom of the bowl. The jaw set comes with 8 buttons which can be placed in the various hole locations to accommodate a variety of bowl sizes. The buttons open to about 12 inches. These jaws are only compatible with the HTC125.
More

Easy Wood Tools, C2000 4 Jaw...

$379.05
eBay Easy Wood Tools, C2000 4 Jaw Easy Chuck, 1-1/4 X 8tpi For Woodturning Lathe
No Shipping Info
/easy-wood-tools-c2000-4/6yCO0n9JguNxOggwUv8MLA==/info
eBay
IN_STOCK ( In stock )
This listing is for a genuine Easy Wood Tools four jaw Easy Chuck stock number C2000 with a 1-1/4 x 8TPI internal thread for the lathe spindle . The item is in its original packaging and sent to you in that condition. Easy Wood Tools are 100% Made in the USA and are a work of art in addition to a phenomenal woodturning tool. Tool description from the Easy Wood Tools Marketing Literature: What makes your Easy Chuck the best chuck on the planet? Snap Lock Technology - Easy Jaws snap securely in
More

Pin Jaws for HTC125...

$75.26
Sears Marketplace Pin Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck
No Shipping Info
/pin-jaws-for-htc125/VdjLjX4ELY9loUYhzVO6hA==/info
Sears Marketplace
IN_STOCK ( In stock )
Pin Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck - This listing is for a set of Pin jaws with Dovetail which are used on the Hurricane HTC125 4 Jaw Woodturning Scroll Chuck. These jaws are for small work and have several uses: Used in expansion mode for internal holding within a dovetail recess. The dovetail is set away from the flat jaw surface by about 1 inch. This gives you better access to the bottom of the bowl for easier tool work while your bowl is on the lathe. The straight side can be used to hold the inside of a small box body. In compression mode they can grip a small part like a final or pen mandrel. These jaws are only compatible with the HTC125.
More

Extended Dovetail Jaws for...

$80.43
Sears Marketplace Extended Dovetail Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck
No Shipping Info
/extended-dovetail-jaws/lEKMRrKNLvCBgM0CJjzfzw==/info
Sears Marketplace
IN_STOCK ( In stock )
Extended Dovetail Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck - This listing is for a set of Extended Dovetail jaws sometimes called Spindle Nose jaws which are used on the Hurricane HTC125 4 Jaw Woodturning Scroll Chuck. They are used in expansion mode for internal holding within a dovetail recess. The dovetail is set away from the flat jaw surface by about 1 inch. This gives you better access to the bottom of the bowl for easier tool work while your bowl is on the lathe. You can also use them in compression mode to hold small object down to These jaws are only compatible with the HTC125.
More

Woodturning Oneway 3 Profiled...

$46.95
eBay Woodturning Oneway 3 Profiled Jaws 3015 For The Talon Chuck
+ $6.70 shipping
/woodturning-oneway-3/WbIxECxqtsL6y4MnRrTHkA==/info
eBay
IN_STOCK ( In stock )
This set of #3 Jaws for the Oneway Talon Chuck has the shape, size and mass necessary to grip large bowls and vases. Jaws are profile shaped and serrated for maximum gripping power. Canada Specs :External chucking capacity 2-7/8 to 4.Internal chucking capacity 3-3/8 to 4-5/8NOTE: These jaws are for the Oneway model #2985 Talon Chuck or #2986 Talon Body Only Chuck only. They are not compatible with any other chuck. .
More

Woodturning, Oneway 2...

$51.45
eBay Woodturning, Oneway 2 Serrated Tower Jaws 3599 For Stronghold Chuck1
+ $7.55 shipping
/woodturning-oneway-2/o1z6zzR_q5azIQY-puZsnA==/info
eBay
IN_STOCK ( In stock )
Machined to a depth of 1-1/4”, this set of serrated #2 Tower Jaws for the Oneway Stronghold Chuck offer deep gripping power and strength for large bowls and vases. The increased depth gives more clearance when working on the back of the piece. They have a narrower range than profiled jaws, but come at a lower cost. The top of the internal profile is dovetailed with no serrations. This part of the jaws is specifically designed for use in non-marking situations like when you want to leave the t
More

Woodturning Oneway 2 Smooth...

$34.95
eBay Woodturning Oneway 2 Smooth Dovetail Jaws 2573 For The Talon Chuck
+ $6.70 shipping
/woodturning-oneway-2/Ga9tyGlYVMhRj3ACDATZdA==/info
eBay
IN_STOCK ( In stock )
#2 Jaws for Oneway's Talon Chuck. Jaws are smooth and have no serrations. Canada Specs :External (compression) chucking capacity of 1-5/8 to 2-7/8.Internal (expansion) capacity of 2 to 3-1/2. .
More

Proxxon Micro Woodturning...

$48.99
Sears Proxxon Micro Woodturning chisel set, 5 pcs.
+ $6.50 shipping
/proxxon-micro-woodturning/b-ztCerMhgBBsn49DiQ8nQ==/info
Sears
IN_STOCK ( In stock )
Highest quality set with the most frequently used chisels: tube, flat, pointed, anvil, and finishing. Neatly packed in a wooden box. Overall tool length of 7 3/4.
More

Hurricane HTC125 5...

$299.61
Sears Marketplace Hurricane HTC125 5 Woodturning 4 Jaw Chuck Kit, w/ Dovetail Jaws. For Wood Lathes with 1 x 8 TPI Spindles
No Shipping Info
/hurricane-htc125-5/jSwtut1LWQczM-UfFM2BfA==/info
Sears Marketplace
IN_STOCK ( In stock )
5 (125MM) Diameter This chuck is made from steel with a chrome plated body and black anodized jaws. The basic chuck includes Standard Dovetail Jaws, Screw, 6 Long Chuck Key, Allen Key for removing the chuck jaws and your choice of one threaded insert. includes Standard Dovetail Jaws, Screw, 6 Long Chuck Key, Allen Key for removing the chuck jaws and your choice of one threaded insert. The backplate is indexed in 24 positions. Please note that this chuck is designed for full size lathes. In our opinion, it is too large and heavy for mini/midi lathes. Check out our HTC100 4 chuck which is great for for Full / Midi / Mini lathes.
More

Fixtures And Chucks For...

$19.89
eBay Fixtures And Chucks For Woodturning: Everything You Need To Know To Secure W
Free Shipping
/fixtures-and-chucks-for/V0-9a36crX4F1vg0I9qXCQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Store Search search Title, ISBN and Author Fixtures and Chucks for Woodturning: Everything You Need to Know to Secure Wood on Your Lathe by Clarence Green Estimated delivery 3-12 business days Format Paperback Condition Brand New Fixtures and Chucks to Make for Woodturning gathers all the essential information about woodturning chucks and fixtures in one place for the first time, making it more accessible.amp;#16 0; More than merely a reference for dedicated turners, this book is designed to hel
More

Woodturning Onewqy 2156 For...

$38.50
eBay Woodturning Onewqy 2156 For The Talon Chuck
+ $6.70 shipping
/woodturning-onewqy-2156/PjBMRSXw4sRLD7EJJeEgww==/info
eBay
IN_STOCK ( In stock )
Oneway Talon Chuck Step Jaws are for turning small items. Stepped on the outside of the jaws to better match various internal diameters. Premium profiled to contact more surface area and grip better. Canada Specs:External chucking capacity 3/8 - 1-3/4.Internal chucking capacity 7/8 - 2-3/8NOTE: These jaws are for the Oneway model #2985 Talon (#17190) and Oneway model #2170 Scrolling chucks only. They are not compatible with any other chuck. .
More

Woodturning Oneway 2756 Flat...

$38.95
eBay Woodturning Oneway 2756 Flat Jaws For The Stronghold Chuck
+ $6.70 shipping
/woodturning-oneway-2756/Ttr_yn0DYgcXoYeONSPUUQ==/info
eBay
IN_STOCK ( In stock )
A set of Flat Jaws for use with the Oneway Stronghold Chuck. Flat Jaws are designed for making custom wooden jaw sets. Just screw wooden blocks to the face of the jaws, then turn them to whatever size you need for a custom grip jaw set. The jaw set enables you to grip virtually any turned shape with total security and without fear of marking. A low cost and very useful jaw set. Jaws are machined steel plate. Canada .
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-25816
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-25816