Brownells

All sets feature a bright red, fiber optic, front sight and fully adjustable peep or U-notch, rear sight. U-notch, rear sight sets use the highly accurate, 3-dot pattern with two green, fiber optic dots at the rear for sharp contrast and quick sight acquisition in all light conditions. No drilling or tapping required for most rifle models. Dovetailed front and rear sights may require minor fitting. For Marlin and Winchester lever action rifles. Dovetail replaces factory front and rear sights. Rear sight is screw adjustable for elevation and drift adjustable for windage; has two, green, fiber optic dots. Front has red, fiber optic rod. FP sight sets have a Foolproof, micro- adjustable, peep s Mfg: Williams Gun Sight SPECS: Aluminum, black anodized. Dovetail fits all Winchester and Marlin... Less

Re-designed and beefed up through the tips for greater strength to remove even the most stubborn Model 12/1897 Forend Caps. Tips are extra wide to give solid contact the full width of the slot, and have enough thickness to retain strength even after being reground to fit any extra narrow slots that you may come across. Designed by working gunsmiths for working gunsmiths, and shop-proven over a lot of years. Flat enough to go into your pocket for emergency field repairs. Fits 12 ga. only. Mfg: Brownells SPECS: 2'''' (5.10cm.) wide x 5'''' (12.7cm) long overall.

Wound from high quality music wire to restore your classic, pre-64 Winchester to like new operating condition. The perfect option for complete spring replacement or as a backup kit for vintage hunting rifles still carried in the field. Includes seven factory weight springs to replace the hard-to-find originals, plus an extra-power firing pin spring for reliable ignition and faster locktime. Mfg: Hollands Gunsmithing SPECS: Music wire. Includes one (1) each of the following: breech bolt sleeve lock spring, bolt stop plunger spring, ejector spring, extra-power firing pin spring, safety lock plunger spring, sear spring, trigger spring, and magazine cover catch spring. Fits all pre-1964 production Winchester Model

Gives the proper chamber headspace dimensions so you know a firearm is safe to fire. GO gauge gives the SAMMI- recommended, minimum chamber depth. NO/GO is slightly longer than the SAMMI- recommended to identify excessive chamber depth and an unsafe condition. Precision-ground and hardened to provide long service life. MIXING AND MATCHING BRANDS OF HEADSPACE GAUGES - Don't do it!! That's the short answer, here's why. It boils down to tolerance stacking. Each Headspace Gauge manufacturer works within a range specified by SAAMI. Manufacturer A may work at the high end of the range while Manufacturer B's gauges are in the middle of the tolerance range. Mixing the two Mfg: Manson Precision SPECS: M7 high speed steel, in-the-white, hardened.

Versatile fixture lets you remove plunger-style ejectors from standard .700 and .510 diameter bolts quickly and safely without launching parts across the room. Works for a variety of popular rifles, including AR-15, AR-style .308 rifles, Remington 700, Winchester 70, Savage, and Sako. Rugged, lightweight body machined from 6061 billet aluminum securely holds bolt while threaded, tool steel shank compresses and captures ejector spring and aligns the roll pin for easy removal with a punch. Gradually loosen the shank to relieve spring tension. Mfg: Brownells SPECS: Anodized 6061 aluminum body, dark green, steel shank. 3-13⁄16 (9.7cm) long with shank fully screwed in, 2 (5.7cm) wide, 1 (4.5cm) high. Fits AR-15, AR-style .308 rifles, Remington 700, Winchester 70, Savage, and Sako rifles.

Models for Browning BPS, pre-2003 Remington 870/1100, Mossberg 500 and Winchester 1300 guns equipped with slug or turkey barrels and factory sight bases. Front sight provides a glowing red dot that's easily seen in all ambient light conditions. Fully adjustable, U-notch rear has two glowing green dots for precise sight alignment. Mfg: Williams Gun Sight SPECS: Machined aluminum, black, anodized. Rear - U notch fiber optic. Front - Fluorescent red front bead on sheared-style blade. Includes instructions. Browning fits BPS shotgun with slug barrel; does not fit vent rib barrel. Remington fits Remington shotguns with 3⁄8 doveta

FEATURES: Constructed of heat treated steel Coated with a black Teflon finish Long action magazines are available in 300 Winchester magnum or 338 Lapua Long action magazines are also available in two different cartridge lengths, 3.715 and 3.775 3.715 is used on many factory rifles and the MDT TAC-21 long action chassis (100-008-333) 3.775 is compatible with Remington long action Police rifles Polymer followers Made in USA AICS style magazines, fit AICS stock and other AICS compatible bottom metalsBENEFITS: High quality USA made magazine that works with AICS compatible rifles and bottom metals Teflon finish Mfg: Accurate Mag

FEATURES: Constructed of heat treated steel Coated with a black Teflon finish Long action magazines are available in 300 Winchester magnum or 338 Lapua Long action magazines are also available in two different cartridge lengths, 3.715 and 3.775 3.715 is used on many factory rifles and the MDT TAC-21 long action chassis (100-008-333) 3.775 is compatible with Remington long action Police rifles Polymer followers Made in USA AICS style magazines, fit AICS stock and other AICS compatible bottom metalsBENEFITS: High quality USA made magazine that works with AICS compatible rifles and bottom metals Teflon finish Mfg: Accurate Mag

Don't get caught short or let a broken shotgun ruin your hunt. Convenient, pre-packaged kits contain the parts most often required for emergency, field repairs. All parts are Remington, Mossberg and Winchester Factory, tagged with the Brownells stock number, and current factory parts number. Two barrel seals, one piston and one piston seal. Fits all 12 ga., plus large-frame 16/20 ga. guns with X or N in serial number. Mfg: Brownells SPECS: Kits contain one each of parts listed unless noted.

Laser-cut, milled, steel handle is press fit to a machined, double-ended steel socket that lets you take the forend-retaining nut off without damaging, or removing, the forend. Socket teeth positively correspond with notches in the forend nut for effortless, scratch-and-dent-f ree removal. Separate 12, and 20 gauge wrenches fit Remington 870, Browning BPS, Ithaca 37 made since 1981, Mossberg 500, Winchester 1200/1300. Mfg: Gun Runners SPECS: Steel, black oxide finish. 12 ga. 6'''' (15.2cm) long. Large End 1.32'''' (3.3cm) outside diameter. Small End 1.2'''' (3cm) outside diameter. 20 ga. 6'''' (15.2cm) long. Large End 1.3'''' (3.2 cm) outside diameter. Small End 1.1'''' (2.7cm) outside diameter.

Models for Browning BPS, pre-2003 Remington 870/1100, Mossberg 500 and Winchester 1300 guns equipped with slug or turkey barrels and factory sight bases. Front sight provides a glowing red dot that's easily seen in all ambient light conditions. Fully adjustable, U-notch rear has two glowing green dots for precise sight alignment. Mfg: Williams Gun Sight SPECS: Machined aluminum, black, anodized. Rear - U notch fiber optic. Front - Fluorescent red front bead on sheared-style blade. Includes instructions. Browning fits BPS shotgun with slug barrel; does not fit vent rib barrel. Remington fits Remington shotguns with 3⁄8 doveta

Eliminates pin drift in the receiver holes so your trigger housing stays in the same place for every shot. Slotted, truss head screws at each end of pin keeps trigger housing properly aligned and free of wobble. Helps deliver reliable trigger performance in tactical and competition guns. Remington includes both front and rear, anti-walk trigger pins. Mfg: Brownells SPECS: Steel, blued finish. Remington - Fits Remington 870/1100/11-87. Mossberg - Fits Mossberg 500/590. Winchester - Fits Winchester 1200/1300/1400. Benelli - Fits Benelli Super 90, Winchester Super X and Browning Gold.

Eliminates pin drift in the receiver holes so your trigger housing stays in the same place for every shot. Slotted, truss head screws at each end of pin keeps trigger housing properly aligned and free of wobble. Helps deliver reliable trigger performance in tactical and competition guns. Remington includes both front and rear, anti-walk trigger pins. Mfg: Brownells SPECS: Steel, blued finish. Remington - Fits Remington 870/1100/11-87. Mossberg - Fits Mossberg 500/590. Winchester - Fits Winchester 1200/1300/1400. Benelli - Fits Benelli Super 90, Winchester Super X and Browning Gold.

For most of the older .22's that no longer have a factory replacement magazine tube, this kit provides the parts needed to custom-make a magazine to fit. All tube blanks have a rolled crimp on one end only. Kit No. 1: .350 O.D. tube, 17 (44.4cm) long. 23 (59.6cm) spring, with follower, plug, and cross pin. For some Winchesters, both older and new, plus many others. Will not fit tubular magazines with a plastic follower such as the Marlin model 60 or derivatives of it. Mfg: Brownells SPEC: Brass tube, steel follower and spring.

Features: O-Rings for Remington 1100/11-87 shotguns Graphite coating for long lasting performance 12 Gauge only Available in packs of 3, 10 and 25 Also works with other shotguns that use an O-Ring barrel seal such as Pro Bore Guns, G-3 models, Beretta shotguns, Franchi shotguns, Winchester shotguns, Charles Daly shotguns, Tri Star shotguns, EAA shotguns and many others Mfg: Brownells SPECS: Fits Remington 1100/11-87 and other shotguns that use an O-Ring barrel seal.