Category

Tools and Accessories
Showing results for "vintage welder"
Results 1 - 40 of 1363

Stud Welder Dent Pulling...

$259.99
Eastwood.com Stud Welder Dent Pulling System
Free Shipping
/stud-welder-dent-pulling/BX8zwOYFar46FikexXAxPQ==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
Stud Welder Dent-Pulling System makes a hole-free dent repair, so it won’t weaken the panel, and needs less filler 3-step repair works without drilling holes, so it won't compromise the strength of the panel. The result is a professional- looking dent repair that requires minimal filler. Stud welder spot-welds pins onto the dented metal surface Pull the pins to pull-out the dent Snip the pins, then grind the rest down
More

Hobart Outdoor Protective...

$129.99
Northern Tool Hobart Outdoor Protective Welder Cover - Model 770714
+ $7.99 shipping
/hobart-outdoor-protective/Oe5J4QeXEXgIMW3DIMgOaw==/info
Northern Tool
IN_STOCK ( In stock )
This Hobart outdoor waterproof welder cover resists stains and mildew, while protecting the finish and internal components of your welder. Designed to fit the Hobart Champion Elite 23 HP Welder/Generator Item #26167, sold separately. U.S.A. Product Type Cover/case. Fits with or without handle and wheel kit installed. Model Number: 770748
More

MIG Welder 175 Amp Versa-Cut...

$949.99
Eastwood.com MIG Welder 175 Amp Versa-Cut Plasma Cutter 40
+ $77.40 shipping
/mig-welder-175-amp/aXIpcy8a1xOeOR25jTLdIQ==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Save BIG money when you get our MIG 175 Welder with spool gun PLUS our Versa-Cut Plasma Cutter! Click on the individual links below for all the specs, but you must click the Add To Cart button above to get the special savings over individual prices! Eastwood's 220v MIG 175 Welder uses its 175-amp output to handle almost any welding job, and comes with a spool gun for aluminum, stainless and steel. MIG welder welds mild and stainless steel, 24-ga. to 5/16 Welds aluminum, 14-ga. to 1/4 30-175-amp welding range The Eastwood Versa Cut 40 Plasma Cutter works with either 110v or 220v input to easily slice through steel and non-ferrous metals up to 3/8 thick. 110v or 220v AC input with inverter technology 20' torch cable; 10' ground cable with clamp Rated 40-amp output
More

Motor Guard WELDER STUD KIT

$376.19
Sears Motor Guard WELDER STUD KIT
+ $19.82 shipping
/motor-guard-welder-stud/F-u6N9TzIaYKFYQEnuLO5w==/info
Sears
IN_STOCK ( In stock )
15OOMagna -spot 1500 stud kit Includes: Magna spot 1500 gun H.D. slide hammer Blow molded case (3) electrodes (500) 2mm draw pins(150) rivets 5 Year warranty
More

MILWAUKEE 49224076 Welders...

$126.00
Zoro MILWAUKEE 49224076 Welders Hole Saw Kit, 8 Pcs.
Free Shipping
/milwaukee-49224076/POmqIGW5Y3_-es3GDIdOWQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Welders Hole Saw Kit, Number of Pieces 8, Tooth Material High Speed Steel, Arbor Design Included, Range of Saw Sizes 3/4 In. to 2 In., Saw Sizes Included 3/4 In., 7/8 In., 1 In., 11/4 In., 11/2 In. and 2 In., Max. Cutting Depth 15/8 In., Mild Steel, Stainless Steel, Nail Embedded Wood, Plastic, Duct, Pipe, Tube, Nonferrous Metals, Teeth per Inch 4/5, Pitch Style Variable Pitch, Thread Size 1/220 and 5/818, Replacement Arbor No. Mfr. No. 49567010 or 49567250, Shank Size 3/8 In. Hex
More

Forney Arc Welder 235FI AC...

$284.99
Sears Forney Arc Welder 235FI AC 230-Volt 230-Amp
Free Shipping
/forney-arc-welder-235fi/tw9OcYBILQNUQsj9tay3YQ==/info
Sears
IN_STOCK ( In stock )
Free Shipping
The Forney 313 235 FI AC 230 volt arc welder is ready to weld right out of the box. This AC welder is sturdy and can weld up to a half inch of mild steel. Tough scratch resistant metal cabinet. Wheel and handle kit is purchased separately for this unit. Forney Industries is one of America s longest operating family-owned metal working product companies. Founded in 1932, Forney offers more than 5,000 products for the hardware, automotive, farm & ranch and do-it-yourself markets. For more information, visit www.forneyind.com. If you ve got metal working questions, we ve got answers. We re committed to your success regardless of location size or needs. Please contact our team at www. customerservice@f orneyind.com. Electrode holder with 10 foot cable. Ground clamp with 7 foot cable. 50 amp... Less
More

Eastwood MIG Welder 135 Amp

$299.99
Eastwood.com Eastwood MIG Welder 135 Amp
+ $38.40 shipping
/eastwood-mig-welder-135/0fFcdfVmKkObFU-V0xhERg==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Eastwood's own MIG 135 Welder: as good as the name brands, but at a fraction of the price!As a home hobbyist or light fabricator, you don't need to spend more for a brand name industrial MIG welder. Our R&D guys developed the Eastwood MIG 135 Welder from scratch to produce excellent bead quality and capabilities that match—and even exceed—the more expensive MIG welders for sale! Welds mild and stainless steel, 24-ga. to 1/4 25-135-amp welding range Tweco-Style Gun and Consumables Powered by standard 120v household current Ships with regulator and hose for MIG welding. Can also be used for Flux-Core welding. Compare to similar welders that sell for over $500 Now compatible with spool gun for efficient welding of aluminum. Backed by Eastwood's no-hassle return policy and 3-year... Less
More

Lincoln Electric Welding...

$269.00
Home Depot Lincoln Electric Welding Tools Weld Pack HD Feed Welder K2188-1
Free Shipping
/lincoln-electric-welding/TItFohAKU_A8oBlROBVTLw==/info
Home Depot
IN_STOCK ( In stock )
Free Shipping
Shop for Tools & Hardware at The Home Depot. Take a look around your home workshop and you'll find dozens of reasons to pick up this reliable, well-built Lincoln Electric welder. With four output ranges, the Weld-Pak HD is one of the most versatile machines in its class. We've included virtually everything you'll need to weld mild steel with gasless, flux-cored wire electrode gun and cable assembly, work clamp and cable, welding hand shield, chipping hammer/brush, even a spool of our self-shielded flux-cored wire.
More

H & S Autoshot 5500 Stinger...

$399.99
CPO Outlets H & S Autoshot 5500 Stinger Plus Stud Welder Kit with Stud Ease Technology
Free Shipping
/h-s-autoshot-5500/6cCXDSiTcpOfxSvyuw46OQ==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
Stinger Stud Welder - 5590. 2.2mm Flexpert Welding Studs - 1001. 2.6mm Heavy-Weight Studs - 1002. Body Side Molding Rivets - 1003. Stud Welding Tip - 1004. Molding Rivet Welding Tip - 1005. Shrink Welding Tip - 1007. Deluxe Slide Hammer - 1016. Eliminator Side-by-Side Adapter with Stud Ease - 1045. Mini Pull'r - 1095. Custom Molded Tool Box - 5529. Exclusive Stud Ease technology ensures the welding stud doesn't fall out of the welder. Assorted welding tips to handle a variety of stud welding tasks. Most powerful mid-range stud welder on the market. Convenient molded storage case keeps parts and accessories organized during and after use
More

Multiquip Welder/Generator ...

$16,965.00
Ohio Power Tool Multiquip Welder/Generator 500A Welder 3KW Generator Kubota Diesel DAW500SA1
No Shipping Info
/multiquip/m9jK8_EyR33hHcVE9aC4Yw==/info
Ohio Power Tool
IN_STOCK ( In stock )
Multiquip Financing is available. Click here for details. The DAW500SA1 equipped with Kubota's Tier 4 Interim D1803 engine is a CC (constant current), CV (constant voltage) welder that delivers up to 500 amps of DC welding output. This model is ideal for very large projects that demand high current for penetration when welding or for Carbon cutting. As a generator it provides up to 3kW of 120/240 volt AC power and can used simultaneously as a welder and generator. CC and CV welding capability Electric-start, diesel- powered Excels in SMAW, FCAW, GMAW, GTAW and ACAC welding processes External oil and fuel drains, and several automatic safety shutdowns Tier 4 interim Kubota diesel engine D1803 Full panel GFCI protection - OSHA and NEC... Less
More

Eastwood TIG Welder, Plasma...

$1,219.99
Eastwood.com Eastwood TIG Welder, Plasma Cutter & Cart Kit
+ $85.80 shipping
/eastwood-tig-welder/EMTnWx9QBaKyvF_4Z-mFVA==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Save BIG money when you get our TIG 200 Welder PLUS our Versa-Cut Plasma Cutter, and organize it all on the Cart included! Click on the individual links below for all the specs, but you must click the Add To Cart button below to get the special savings over individual prices! Eastwood- engineered TIG 200 AC/DC Welder offers professional- quality TIG welding at an affordable price! This exceptional TIG welder operates on either 110vAC, 15-amp circuit or 220vAC, 30-amp circuit 1/4-thick welding capacity High-frequency start for precise arc control Square-wave inverter for accurate aluminum welding The Eastwood Versa Cut Plasma Cutter works with either 110v or 220v input to easily slice through steel and non-ferrous metals up to 3/8 thick. 110v or 220v AC input with inverter... Less
More

Motor Guard WELDER STUD KIT...

$729.99
Sears Motor Guard WELDER STUD KIT DELUXE
Free Shipping
/motor-guard-welder-stud/QgIL4Tn6j7sXj0AWBxtiPA==/info
Sears
IN_STOCK ( In stock )
Free Shipping
Magna -Spot 1550 Deluxe Kit
More

Stanley 10970U 80 Amp 120V...

$249.00
Walmart.com Stanley 10970U 80 Amp 120V Flux-Cored Welder
+ $7.99 shipping
/stanley-10970u-80-amp/3lMSYADY0469HvHY2LyI_w==/info
Walmart.com
IN_STOCK ( In stock )
The Stanley MIKROMIG Flux-Cored Welder is the perfect wire-feed welder to have around the shop, farm or house. Plugging into common 120V outlets, the MIKROMIG provides the flexibility and convenience to get the job done. The MIKROMIG uses self-shielded, flux-cored wire and is easy to use with two power settings and adjustable speed control for the desired metal thickness. Start welding right out of the box with the included cables, torch, clamp, and starter spool of flux-cored wire, hammer/chipper and face shield. Power, performance and portability from the brand you trust. FeaturesWelds mild steel from 5/64 in. - 13/64 in. to handle a large variety of jobsNo gas required and uses self-shielded flux-cored wire 0.03 - 0.04 in. in diameter2 convenient power settings for desired metal... Less
More

H & S Autoshot 9000 Stud...

$459.99
CPO Outlets H & S Autoshot 9000 Stud Welder Kit with Stud Ease Technology
Free Shipping
/h-s-autoshot-9000-stud/nvJfWbJ8Hp5ubi2PMI99Kw==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
Deluxe Stud Welder - 9190. 2.2mm Flexpert Welding Studs - 1001. 2.6mm Heavy-Weight Studs - 1002. Body Side Molding Rivets - 1003. Stud Welding Tip - 1004. Molding Rivet Welding Tip - 1005. Shrink Welding Tip - 1007. Deluxe Slide Hammer - 1016. Eliminator Side-by-Side Adapter with Stud Ease - 1045. Mini Pull'r - 1095. Custom Molded Tool Box - 9129. Exclusive Stud Ease technology ensures the welding stud doesn't fall out of the welder. Assorted welding tips to handle a variety of stud welding tasks. Most powerful transformer on the market ensures consistent power and performance. Convenient molded storage case keeps parts and accessories organized during and after use
More

Super Pro Plus Stud Welder

$399.99
Eastwood.com Super Pro Plus Stud Welder
Free Shipping
/super-pro-plus-stud-welder/MunMf4zlNfjzoT3R9nHIYA==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
Powerful 2,000-amp Stud Welder makes this Super Pro Plus Dent-Pulling System perfect for most any body repair job You'll use this professional system to repair most dents, pull creases, weld trim rivets, and shrink metal, and the robust 2,000-amp stud welder gun helps you get it done fast. 4 electrodes, for stud, Magna Wire, rivet welding, shrinking 2 sizes of draw pins, for light- and heavy-gauge work Includes twist-on/off slide hammer and T hand puller Do you have a product idea? Click Here to suggest it!
More

Pro Stinger Stud Welder kit...

$499.99
Eastwood.com Pro Stinger Stud Welder kit with 9-finger claw puller
Free Shipping
/pro-stinger-stud-welder/pBryGl3g5p_4LQ2pKAqAlw==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
Stinger-Plus 5500 Kit...one of the finest Stud Welders used across the industry Collision shops use pro-grade stud welder kits like this every day for repair of body dents or dings without drilling. Just weld the stud onto the dented panel, pull the dent out, then snip or grind the stud off. Stinger-Plus 5500 Stud Welder was tested on 2 million welds Stud-Ease technology for easy 1-handed operation Includes Deluxe Slide Hammer, 9-Claw Wire Puller, Mini-Puller, and more
More

MIG Welders Pliers

$8.79
Eastwood.com MIG Welders Pliers
+ $6.95 shipping
/mig-welders-pliers/MkKO9IaLBLjKxRa7iR0sTQ==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
MIG Welder's Pliers make your welding tasks a whole lot easier Unlike typical pliers, these pliers are designed to help you through those specialized MIG welding tasks. Squared-off, spring-loaded tips remove spatter Knurled surfaces hold tips and nozzles for installation Built-in wire cutter Comfortable rubberized handle
More

Forney 270-Amp MIG Welder...

$1,999.99
Sears Forney 270-Amp MIG Welder 230-Volt
+ $231.31 shipping
/forney-270amp-mig-welder/HDi5nu5pR4Pm7TcfmU0c2w==/info
Sears
IN_STOCK ( In stock )
The Forney 319 MIG Welder, 230 volt, CV/DC, 1-phase with 270 amp maximum output is a versatile machine for light industrial, repair shops, farms, automotive, and general fabrication. This machine is MIG ready with regulator and gas hose. This machine is a multi step transformer based type welder with ten taps. Welding processes are MIG (GMAW) and Flux Cored (FCAW). The Forney 270 MIG is a new machine for Forney and offers quality features like spool gun capability, quick euro disconnect torch, longer gun/torch with common consumables, extra long power cord, HD cast aluminum feed/drive system with geared idler and drive rolls, multiple trigger modes and high output and duty cycle with a full size cabinet. This machine has a digital readout and multiple trigger modes for spot welding. 2T... Less
More

Motor Guard Welder Stud Kit

$394.99
Quill.com Motor Guard Welder Stud Kit
Free Shipping
/motor-guard-welder-stud/3dUXVbNikrSYW6p1KKC_JQ==/info
Quill.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
Great for body repair. Dent removal tool
More

Klutch Welder/Cabinet...

$44.99
Northern Tool Klutch Welder/Cabinet Protective Cover - Fits Deluxe Welding Cabinet (Item# 164782)
+ $6.99 shipping
/klutch-weldercabinet/HHep2mN4hu8bmuiRfc8qlA==/info
Northern Tool
IN_STOCK ( In stock )
The Klutch Welder/Cabinet Cover protects your portable welding cabinet Item# 164782, sold separately along with your welding equipment and cylinder up to 42'H from dirt and debris. Dimensions L x W x H in. 28 5/16 x 17 x 33 1/2, Material Type Canvas, Product Type Cover. Tough canvas cover Three straps tightly secure the easy-on, easy-off cover over the entire cabinet. Model Number: MIGCC-K
More

Bessey Multi-Angle Vise...

$463.80
Zoro Bessey Multi-Angle Vise Clamp, Welders, Cast Iron, WVS-4
Free Shipping
/bessey-multiangle-vise/Ol4shnejNnOMpJEC4E05QA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
MultiAngle Vise Clamp, Welders, Material Cast Iron, Throat Depth (In.) 43/8, Miter Capacity (In.) , Jaw Height (In.) 13/8, Jaw Length (In.) , Spindle Copper Plated, Features Range of Angle: 5 to 180 Degrees , Automatic Adjustment To Work Pieces Of Different Thicknesses, Dual Vises That Swivel Independently, Function 3in1 Design, For Clamping Components Of Different Thicknesses At Any Chosen Angle
More

MIG Welder 175 Amp...

$104.99
Eastwood.com MIG Welder 175 Amp Replacement Torch
Free Shipping
/mig-welder-175-amp/9CTP3W_-uXm1vggKXg6ngQ==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
This is a replacement Torch (Gun) for the Eastwood MIG175. It comes ready to install with a nozzle, contact tip, and liner.This Torch will fit units purchased in 2010 through April of 2013. For units purchased April through December 2013 please call 1-800-544-5118 for assistance in ordering the correct Torch.
More

Eastwood 90 amp Flux Core...

$149.99
Eastwood.com Eastwood 90 amp Flux Core Welder
+ $21.24 shipping
/eastwood-90-amp-flux-core/RgP3U0cTULS2SMOcXKoV_w==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
For easy, economical welding, without shielding gas, use Eastwood's 90-Amp AC Flux Core Welder Get MIG-welding functionality, without the need for shielding gas. AC-wound transformer delivers 90 amps of flux core welding in mild steel with self-shielding, 0.030 flux wire. Welds mild steel as thick as 1/8, as thin as 20-gauge No need for shielding gas or regulators Use it for in-garage or in-home projects
More

Campbell Hausfeld Wheel Kit...

$139.99
Northern Tool Campbell Hausfeld Wheel Kit for Generator/Welder Item 164091, Model GW003100AJ
+ $10.99 shipping
/campbell-hausfeld-wheel/bw5njjjdmaQbxmPIpG3ecg==/info
Northern Tool
IN_STOCK ( In stock )
Campbell Hausfeld wheel/handle kit for the Generator/Welder item# 164091. Allows safe and easy installation for convenient transportation of the Gen/Welder. Includes two wheels, 1 axle, 1 handle and 1 parts kit. Compatible With Item Number s 164091, Wheels qty. 2.. Model Number: GW003100AJ
More

Forney 190-Amp MIG/Stick/TIG...

$999.99
Sears Forney 190-Amp MIG/Stick/TIG Multi-Processor Welder, 120/230-Volt
Free Shipping
/forney-190amp/3ZiKlnSjqvoRO3tPsxfyig==/info
Sears
IN_STOCK ( In stock )
Free Shipping
The Forney 324 multi-process welder is 220 volts or 120 volts (adapter plug included) CV/DC, 1-phase with 190 amp maximum output. The Forney 190 MP welder is a versatile multiprocess machine capable of MIG, Stick, or DC TIG welding. It will work great for maintenance and repair, light industrial, farms, automotive, boats, and general fabrication. This machine is MIG ready with regulator and gas hose and easily switches between welding processes. The Forney 190 MP is a new machine for Forney and offers quality features like spool gun capability (purchased seperately), standard MIG and synergic MIG modes, stick electrode holder, quick euro style disconnect torch, extra long power cord, longer gun/torch with common consumables and HD cast aluminum feed/drive system with geared idler and... Less
More

Unispotter Deluxe 9000 Stud...

$549.99
Eastwood.com Unispotter Deluxe 9000 Stud Welder
+ $19.41 shipping
/unispotter-deluxe-9000/ZtA0NjEtsfMMCerVTtgC6w==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Uni-Spotter 9000 Deluxe Stud Welder Kit is built to be the best stud welder for the bodywork professional The 9000 Deluxe has the most powerful transformer on the market and will keep operating efficiently in all kinds of high-demand situations, such as multiple users or a low-voltage source at the end of a long extension cord. Exclusive Stud-Ease Technology holds studs tight Transformer tested to produce 10 million welds Includes 2.2mm and 2.6mm copper-coated studs, body side molding rivets See below for complete kit contents
More

MIG Welder 135 Amp...

$104.99
Eastwood.com MIG Welder 135 Amp Replacement Torch with Plastic Plug
Free Shipping
/mig-welder-135-amp/u8cVcPhWxLf6FminYT5y3g==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
This is a replacement Torch (Gun), with plastic plug, for the Eastwood MIG135. It comes ready to install with a nozzle, contact tip, and liner.
More

Motor Guard Welder Stud Kit...

$389.99
Quill.com Motor Guard Welder Stud Kit Deluxe
Free Shipping
/motor-guard-welder-stud/BtU6NRhXQo_Sv5KTjFIvDA==/info
Quill.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
Magna Spot 1550 Gun. H.D. slide hammer
More

Deluxe Stud Welder...

$369.99
Eastwood.com Deluxe Stud Welder Dent-Pulling System
Free Shipping
/deluxe-stud-welder/zt3u-PLhiroRrjo-7b_RKw==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
Heavy-Duty Quality Dent-Pulling System. This unit utilizes a wider range of draw pins for greater versatility. Includes heavy-duty Magna Spot 1500 stud welding gun, heavy-duty twist-to-lock slide hammer, 3 electrodes, 500 2mm draw pins, 150 trim rivets, and a convenient molded carrying case. 5-year manufacturer's warranty.
More

MIG Welder Gas Regulator

$31.49
Eastwood.com MIG Welder Gas Regulator
+ $10.95 shipping
/mig-welder-gas-regulator/mu00Up0Vfy8RlFxn3c_N_A==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Dual-gauge CO2, Argon regulator for Eastwood MIG 135 (12011) and MIG 175 (12012).
More

Evo Icon Welder Hot Tool...

$21.25
SleekHair.com Evo Icon Welder Hot Tool Shaper - 6.8 oz
+ $5.49 shipping
/evo-icon-welder-hot-tool/46hIT6GGy2kVKqQ5ZXajRA==/info
SleekHair.com
IN_STOCK ( In stock )
What is this product? A thermal spray that helps protect hair from hot tools More info: Smooth, straight hair that holds its shape all day. All hair types needing protection from hot tools and humidity
More

Welder, Plastic

$23.15
Walmart.com Welder, Plastic
+ $7.15 shipping
/welder-plastic/kli468SHYjG1VgO5CJkESQ==/info
Walmart.com
IN_STOCK ( In stock )
Plastic Welder, Container Size 50 Milliliters, Container Type Cartridge, Structural Adhesive, For Metal and Plastic RestrictionsHazar dous MaterialCaliforni a Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Epoxy, Urethane & Acrylic AdhesivesDevcon Plastic Welder High-viscosity structural adhesive holds gaps up to 0.12. Bonds most plastics, bare metals, dissimilar substrates.
More

Stanley 10970U 80 Amp 120V...

$249.00
CPO Outlets Stanley 10970U 80 Amp 120V Flux-Cored Welder
Free Shipping
/stanley-10970u-80-amp/BhADhkUwrk6-f5yL-jbkrw==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
MIKROMIG 80 Amp 120V Flux-Cored Welder - 10970U. Cables. Clamp. Torch. Hammer. Brush. Shield. Wire Spool. Welds mild steel from 5/64 in. - 13/64 in. to handle a large variety of jobs. No gas required and uses self-shielded flux-cored wire 0.03 - 0.04 in. in diameter. 2 convenient power settings for desired metal thickness. Adjustable wire speed for smooth and clean welds. Eliminates overheating with turbo fan and automatic shutoff. Can be powered with generator in an outdoor worksite for convenience. Easy top opening access to wire and drive system
More

Speedway Start to Finish 90A...

$144.96
Sears Speedway Start to Finish 90A Flux Welder .035 or .030' Wire Capacity - 7643
Free Shipping
/speedway-start-to-finish/0HVgfUTfupKYV3atfFnNRA==/info
Sears
IN_STOCK ( In stock )
Free Shipping
The SPEEDWAY 90 Amp Flux Welder will help you finish all of your around the home welding jobs quickly and efficiently. The single phase, 115 volt welder operates at 10% at 90 amps, uses 0.035 inch or 0.030 inch wire with a thickness of 18 gauge to 3/16 inch steel. With a wire feed speed control of 0-400 IPM and a clamp cable length of 10 feet, this welder will assist you in safely and quickly completing your weld on steel or stainless steel. The thermal protection with a warning light will also notify you in the event of the welder beginning to overheat. This tough welder is ETL certified.
More

Markal 96101 Silver-Streak &...

$7.03
homelectrical Markal 96101 Silver-Streak & Red-Riter Welders Pencil
No Shipping Info
/markal-96101/vBJef95BV6Q62YjVuKi80A==/info
homelectrical
IN_STOCK ( In stock )
Store not rated
Apply this silver welder's pencil when marking on various types of metal surfaces, including, wet, oily, or even rusty surfaces. The marks are resistant to torch flames and will not rub off or burn off like soapstone. Highly visible marks illuminate when cutting or welding just as durable marks will not scratch or abrade metal surfaces. Color: Silver. (Markal 96101)
More

Markal Welders Pencil,...

$9.37
Zoro Markal Welders Pencil, Silver, 96101G
+ $5.00 shipping
/markal-welders-pencil/oMetbSa5GvdPFVgdT_ZlCg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Welders Pencil, Tip Size Medium, Silver, Tip Style Point, Tip Material Lead, Dry Time Immediate, Meets Low Halogen and Chloride Standards of MIL STD2041D and US Energy Research and Development Adminstration's RDT, Package Quantity 12
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355