Category

Tools and Accessories
Showing results for "vintage watchmakers lathe"
Results 1 - 40 of 1500+

Shop Fox M1112 Gunsmith Lathe...

Free Shipping
3 stores Shop Fox M1112 Gunsmith Lathe (754001511125)
Removable gap bed allows turnings up to 17-Inch in Diameter Easy to use lever controls Hardened and...
More

Cowells Watchmakers Lathe...

$20.00
eBay Cowells Watchmakers Lathe Spindle Tap
+ $3.22 shipping
/cowells-watchmakers-lathe/YLFl_XjpO1lfCKaXfNoxvg==/info
eBay
IN_STOCK ( In stock )
Here is a new spindle thread tap for the OLDER Cowells watchmakers lathe. It is 14 mm by 1.5 mm and also fits the mount on the Cowells Indexing fixture. The tap is marked Emuge M14 x 1.5 Made in Germany. Please check your spindle size before you buy
More

JET 2 in. Lathe with Taper...

$15,299.00
CPO Jet JET 2 in. Lathe with Taper Attachment 321852
Free Shipping
/jet-2-in-lathe-with/N7mhv0Tkg8rQ2p8qgTkdKw==/info
CPO Jet
IN_STOCK ( In stock )
Store not rated
Free Shipping
GH-1640ZK 2 in. Lathe - 321852. Taper Attachment - 321293. Steady Rest. Follow Rest. 8 in. Three Jaw Scroll Chuck. 8 in. Drive Plate. 10 in. Four Jaw Independent Chuck. 16 in. Face Plate. Tool Box Kit. Lathe bed is made of cast iron with low vibration and high rigidity. Two precision-ground v-slideways, reinforced by supersonic frequency hardening, offer precision guidance for the carriage. The headstock is cast from high-grade, low-vibration cast iron with the spindle supported by a cylindrical bearing at the front, a tapered roller bearing, and a ball bearing. Lathe adopts a three-axle sliding common gear mechanism which together with the thread selection change mechanism and doubling mechanism, enable it to cut a comprehensive range of metric, modular, and diametrical pitch threads... Less
More

JET ZX Lathe - 14 x 60, Model...

$18,000.00
Northern Tool JET ZX Lathe - 14 x 60, Model GH-1460ZX
Free Shipping
/jet-zx-lathe-14-x-60/_fWzMwu8haPevXEmj8k3aQ==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The 14in. ZX Series large spindle bore lathe is designed exclusively by with a 3 1/8in. bore spindle supported by two tapered and one ball bearing. Chrome molybdenum headstock gears are hardened, ground and shaved. Universal gearbox allows inch, metric, diametric and module pitch threads, no change gears required. Carriage features one-shot lubrication and Turcite B on bed sliding surfaces. Dimensions L x W x H in. 117 x 40 x 48, Carriage Travel in. 55, Width Between Centers in. 60, HP 7.5, Thread Cutting in. 1 5/8-72, Volts 230/460V pre-wired 230V, Stand Included Yes, Thread Cutting mm 0.05-20, Spindle Speeds qty. 12, Speed RPM 42-1,800. T-slotted compound slide featuring a four-way tool post One-piece cast iron base absorbs vibration allowing heavier cuts High-quality ANSI Class 50... Less
More

JET 719201 JWL-1221VS Wood...

Free Shipping
4 stores JET 719201 JWL-1221VS Wood Lathe Bed Extension
More

Bostitch Stapler. 2 in...

Free Shipping
5 stores Bostitch Stapler. 2 in. Pneumatic Lathing Stapler Nailer 450S2-1
More

JET JWL-1221VS Wood Lathe Bed...

4 stores JET JWL-1221VS Wood Lathe Bed Extension Stand 719203 NEW
More

JET Lathe with Taper...

$20,799.00
CPO Jet JET Lathe with Taper Attachment 321565
Free Shipping
/jet-lathe-with-taper/kKDnFy2B-0_8kBmgum8tcw==/info
CPO Jet
IN_STOCK ( In stock )
Store not rated
Free Shipping
GH-2280ZX Lathe with Taper Attachment - 321565. 10 in. 3-Jaw Chuck with Top Reversing Jaws. 12 in. 4-Jaw Chuck. 16 in. Face Plate. 4-Way Tool Post. Follow Rest. Large Capacity Steady Rest. Fully Integrated Coolant System. Full Length Splash Guard and Coolant System. Large, Easy-To-Use Foot Brake. Articulating Halogen Work Lamp. Centrally Located Controls with Jog Button. Threading Dial. Mounting Pads and Levelers. Spindle Sleeve (MT-7 and MT-5). Dead Center and Live Center. Tool Box and Adjusting Tools. ISO 9001 certified manufacturer. 3-1/8 in. bore spindle is supported by two tapered and one ball bearing. Chrome molybdenum headstock gears are hardened, ground and shaved. Universal gearbox allows inch, metric, diametral and module pitch threads, no gear change required. Carriage features... Less
More

Fusible 5/32” Belting For...

$5.49
eBay Fusible 5/32” Belting For Watchmaker Lathe, Jewelers Belt, Levin
+ $2.45 shipping
/fusible-532-belting-for/-WEDT2OdDNCPunh2bDkaeQ==/info
eBay
IN_STOCK ( In stock )
Up for your consideration is a length of urethane fusible belting. Makes an excellent drive belt for a watchmaker lathe, or similar application. This urethane belting material is 4 foot long, 5/32” round in diameter and clear in color. Joining/welding the ends together is easily done and instructions are included. I have also listed the same belting material in 5mm round. The picture is a stock photo of the actual item being sold. • I ship out daily (except Sunday Holidays) and process item
More

BAUSCH & LOMB 81-41-72 Loupe,...

$10.27
Walmart.com BAUSCH & LOMB 81-41-72 Loupe, Watchmakers,5x
+ $5.00 shipping
/bausch-lomb-814172/kpGMFYNnDO16aVi-rXHlrA==/info
Walmart.com
IN_STOCK ( In stock )
Watchmakers Loupe, Power Rating 5X, Diopters 20D, Focal Distance 2 Inches, Lens Diameter 25.4 Millimeters, Optical Quality Glass Lens Features Diopter : 20D Lens Dia. (mm) : 25.4 Focal Distance (In./mm) : 2/5.1cm Power : 5x Item : Watchmakers Loupe Features : Lightweight with Optical Quality Glass, Precision Molded to Fit Over Eye Lids
More

Fusible 5mm Belting For...

$5.99
eBay Fusible 5mm Belting For Watchmaker Lathe, Jewelers, Belt, Urethane
+ $2.45 shipping
/fusible-5mm-belting-for/CB8LQiizYdcyyDrOpu_imQ==/info
eBay
IN_STOCK ( In stock )
Up for your consideration is a length of urethane fusible belting. Makes an excellent drive belt for a watchmaker lathe, or similar application. This urethane belting material is 4 foot long, 5mm round in diameter and clear in color. Joining/welding the ends together is easily done and instructions are included. I have also listed the same belting material in 5/32 round.T he picture is a stock photo of the actual item being sold. • I ship out daily (except Sunday Holidays) and process items
More

BAUSCH & LOMB 81-41-71 Loupe,...

$8.42
Walmart.com BAUSCH & LOMB 81-41-71 Loupe, Watchmakers,7x
+ $5.00 shipping
/bausch-lomb-814171/ms86NrRt4S0ISwlySI_wGA==/info
Walmart.com
IN_STOCK ( In stock )
Watchmakers Loupe, Power Rating 7X, Diopters 28D, Focal Distance 1.5 Inches, Lens Diameter 25.4 Millimeters, Optical Quality Glass Lens Features Diopter : 28D Lens Dia. (mm) : 25.4 Focal Distance (In./mm) : 1.5/3.8cm Power : 7x Item : Watchmakers Loupe Features : Lightweight with Optical Quality Glass, Precision Molded to Fit Over Eye Lids
More

JET Lathe with Taper...

$18,999.00
CPO Jet JET Lathe with Taper Attachment Installed 321486
Free Shipping
/jet-lathe-with-taper/H8x1OX4HWL9JgKZCgVDsBw==/info
CPO Jet
IN_STOCK ( In stock )
Store not rated
Free Shipping
GH-1880ZX TAK Lathe with Taper Attachment Installed - 321486. 10 in. 3-Jaw Chuck with Top Reversing Jaws. 12 in. 4-Jaw Chuck. 16 in. Face Plate. 4-Way Tool Post. Follow Rest. Large Capacity Steady Rest. Fully Integrated Coolant System. Full Length Splash Guard and Coolant System. Large, Easy-To-Use Foot Brake. Articulating Halogen Work Lamp. Centrally Located Controls with Jog Button. Threading Dial. Mounting Pads and Levelers. Spindle Sleeve (MT-7 and MT-5). Dead Center and Live Center. Tool Box and Adjusting Tools. ISO 9001 certified manufacturer. 3-1/8 in. bore spindle is supported by two tapered and one ball bearing. Chrome molybdenum headstock gears are hardened, ground and shaved. Universal gearbox allows inch, metric, diametral and module pitch threads, no gear change required... Less
More

Fusible 4mm Belting For...

$5.99
eBay Fusible 4mm Belting For Watchmaker Lathe Textured 4 Mm Jewelers Belt, Levin
+ $2.45 shipping
/fusible-4mm-belting-for/bDTgXvafw19Kc3OzdNd5tg==/info
eBay
IN_STOCK ( In stock )
Up for your consideration is a length of fusible belting. Makes an excellent drive belt for a watchmaker lathe, or similar application. It’s 4 feet long and 4mm round in diameter. And its surface is textured (please see picture at bottom) for a better grip, works great. Joining/welding the ends together is easily done and instructions are included. The picture is a stock photo of the actual item being sold. • I ship out daily (except Sunday Holidays) and process items within 24 hrs of payme
More

JET Bench Lathe W/C80 & TAK...

$9,299.00
CPO Jet JET Bench Lathe W/C80 & TAK 321115
Free Shipping
/jet-bench-lathe-wc80/Dtibt89pGHhg_-y3B5Gblw==/info
CPO Jet
IN_STOCK ( In stock )
Store not rated
Free Shipping
Bench Lathe W/C80 &, TAK - 321115. One of the most popular JET, lathes now comes with an enclosed gearbox as a standard feature. Enclosed gearbox design provides smooth, quiet operation. Fast, easy speed changes. Hardened and ground gears are featured in the headstock and gearbox. D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. Headstock is constantly oiled during operation. Gearbox gives wide inch threading and feed capabilities with no gear changes. V-way bed design is induction hardened and ground. Gap bed section provided for larger diameter work. Independent lead screw and feed rod
More

JET Lathe with Taper...

$16,499.00
CPO Jet JET Lathe with Taper Attachment Installed 321474
Free Shipping
/jet-lathe-with-taper/F6mHULOwmEhYEP6oA50LfQ==/info
CPO Jet
IN_STOCK ( In stock )
Store not rated
Free Shipping
GH-1640ZX TAK Lathe with Taper Attachment Installed - 321474. 10 in. 3-Jaw Chuck with Top Reversing Jaws. 12 in. 4-Jaw Chuck. 12 in. Face Plate. 4-Way Tool Post. Follow Rest. Large Capacity Steady Rest. Fully Integrated Coolant System. Full Length Splash Guard and Coolant System. Large, Easy-To-Use Foot Brake. Articulating Halogen Work Lamp. Centrally Located Controls with Jog Button. Threading Dial. Mounting Pads and Levelers. Spindle Sleeve (MT-7 and MT-5). Dead Center and Live Center. Tool Box and Adjusting Tools. ISO 9001 certified manufacturer. 3-1/8 in. bore spindle is supported by two tapered and one ball bearing. Chrome molybdenum headstock gears are hardened, ground and shaved. Universal gearbox allows inch, metric, diametral and module pitch threads, no gear change required... Less
More

BAUSCH & LOMB 81-41-73 Loupe,...

$9.88
Walmart.com BAUSCH & LOMB 81-41-73 Loupe, Watchmakers, 4x
+ $5.00 shipping
/bausch-lomb-814173/tWaWVkGHhxkny6jdN-HhKg==/info
Walmart.com
IN_STOCK ( In stock )
Watchmakers Loupe, Power Rating 4X, Diopters 16D, Focal Distance 2.5 Inches, Lens Diameter 25.4 Millimeters, Optical Quality Glass Lens Features Diopter : 16D Lens Dia. (mm) : 25.4 Focal Distance (In./mm) : 2.5/6.4cm Power : 4x Item : Watchmakers Loupe Features : Lightweight with Optical Quality Glass, Precision Molded to Fit Over Eye Lids
More

Starrett Ww Collet 10 For...

$17.95
eBay Starrett Ww Collet 10 For Watchmakers Lathe - - 8mm Jewelers Lathe Size
Free Shipping
/starrett-ww-collet-10-for/vFUHsPBFetGgz7MmOVTPtQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
NEW STARRETT WW COLLET Standard 8mm Size This auction is for a single - new Starrett WW collet in the metric size of #10 (1.0 mm). ONE COLLET ONLY! It will fit any standard WW watchmakers lathe such as American Watch Tool Company, Boley, Clement, Derbyshire, Levin or any other built to WW standards. A Full selection of collets makes your lathe most useful. This illustration is just here to catch your eye and open your mind to the advantages of a full set. This auction is for a single collet. Th
More

JET Lathe with Taper...

$17,999.00
CPO Jet JET Lathe with Taper Attachment Installed 321477
Free Shipping
/jet-lathe-with-taper/U_6MpAn-9HMeF5d3QnDsYw==/info
CPO Jet
IN_STOCK ( In stock )
Store not rated
Free Shipping
GH-1660ZX TAK Lathe with Taper Attachment Installed - 321477. 10 in. 3-Jaw Chuck with Top Reversing Jaws. 12 in. 4-Jaw Chuck. 12 in. Face Plate. 4-Way Tool Post. Follow Rest. Large Capacity Steady Rest. Fully Integrated Coolant System. Full Length Splash Guard and Coolant System. Large, Easy-To-Use Foot Brake. Articulating Halogen Work Lamp. Centrally Located Controls with Jog Button. Threading Dial. Mounting Pads and Levelers. Spindle Sleeve (MT-7 and MT-5). Dead Center and Live Center. Tool Box and Adjusting Tools. ISO 9001 certified manufacturer. 3-1/8 in. bore spindle is supported by two tapered and one ball bearing. Chrome molybdenum headstock gears are hardened, ground and shaved. Universal gearbox allows inch, metric, diametral and module pitch threads, no gear change required... Less
More

JET Lathe with Taper...

$18,599.00
CPO Jet JET Lathe with Taper Attachment Installed 321463
Free Shipping
/jet-lathe-with-taper/Xfx1LOOniWZA4hyS6epcVg==/info
CPO Jet
IN_STOCK ( In stock )
Store not rated
Free Shipping
GH-1860ZX-TAK Lathe with Taper Attachment Installed - 321463. 10 in. 3 Jaw Chuck With Top Reversing Jaws. 12 in. Independent 4-Jaw Chuck. 16 in. Face Plate. Four-Way Tool Post. Large Capacity Steady Rest. Fully Integrated Coolant System. Full Length Splash Guard and Coolant Return. Large Foot Brake. Articulating Halogen Work Lamp. Centrally Located Controls with Jog Button. Threading Dial. Mounting Pads and Levelers. Spindle Sleeve (MT-7 to MT-5). Dead Center. Live Center. Tool Box and Adjusting Tools. Uniquely designed exclusively by JET. ISO 9001 certified manufacturer. 3-1/8 in. bore spindle is supported by two tapered and one ball bearing. Chrome molybdenum headstock gears are hardened, ground and shaved. Universal gearbox allows inch, metric, diametral and module pitch threads, no... Less
More

JET Lathe with Taper...

$10,499.00
CPO Jet JET Lathe with Taper Attachment Installed 321516
Free Shipping
/jet-lathe-with-taper/ZZT9CZsDaR5QWK1MlJi_9g==/info
CPO Jet
IN_STOCK ( In stock )
Store not rated
Free Shipping
GH-1340W-3-TAK, Lathe with Taper Attachment Installed - 321516. 6 in. 3-Jaw Direct Mount Chuck with Top Reversing Jaws. 8 in. 4-Jaw Chuck. 12 in. Face Plate. Four-Way Tool Post. Steady and Follow Rest. Micro-Carriage Bed Stop. Front removable chip tray. Spindle Jog Button. Foot Brake. Coolant System with Splash Guard. Metric Change Gear. Halogen Work Lamp. Centers and Headstock Center Sleeve. Threading Dial. Tool Box. Heavy-Duty Stand. Uniquely designed exclusively by JET. Hardened and ground gears are featured in the headstock and gearbox. D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. Headstock is constantly oiled during operation. Splined, not keyed, shafts are utilized. Gearbox gives larger threading and feed capabilities with no... Less
More

JET Lathe with Taper...

$15,599.00
CPO Jet JET Lathe with Taper Attachment Installed 321467
Free Shipping
/jet-lathe-with-taper/bY--b3adUlZ23X2wJhLCjQ==/info
CPO Jet
IN_STOCK ( In stock )
Store not rated
Free Shipping
GH-1440ZX-TAK Lathe with Taper Attachment Installed - 321467. 10 in. 3 Jaw Chuck With Top Reversing Jaws. 12 in. Independent 4-Jaw Chuck. 12 in. Face Plate (16 in. Models). Four-Way Tool Post. Large Capacity Steady Rest. Fully Integrated Coolant System. Full Length Splash Guard and Coolant Return. Large Foot Brake. Articulating Halogen Work Lamp. Centrally Located Controls with Jog Button. Threading Dial. Mounting Pads and Levelers. Spindle Sleeve (MT-7 to MT-5). Dead Center. Live Center. Tool Box and Adjusting Tools. Uniquely designed exclusively by JET. ISO9001 certified manufacturer. 3-1/8 in. bore spindle is supported by two tapered and one ball bearing. Chrome molybdenum headstock gears are hardened, ground and shaved. Universal gearbox allows inch, metric, diametral and module pitch... Less
More

Westward 14, Long Angle Lathe...

$20.07
Zoro Westward 14, Long Angle Lathe File, Alloy Steel, 10Z695
+ $5.00 shipping
/westward-14-long-angle/_SWCKnHbHzEQJeu2u9eMKw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Long Angle Lathe File, American Pattern, Profile Shape Rectangular, Cut Type Bastard, Length 14 In., Natural, 20/21 Teeth per Inch, General Purpose
More

JET Lathe with S-920N Stand...

$2,149.00
CPO Jet JET Lathe with S-920N Stand 321155K
Free Shipping
/jet-lathe-with-s920n/e6eoUtuCrnt_Uts-rGZh6g==/info
CPO Jet
IN_STOCK ( In stock )
Store not rated
Free Shipping
BD-920W, Lathe with S-920N Stand - 321155K. 4 in. 3-Jaw scroll Chuck With Threaded Back Plate. 7 in. 4-Jaw Independent with Threaded Back Plate. Face Plate. Four-Way Tool Post. Steady and Follow Rest. Metric Change Gear. Centers. Threading Dial. Tool Box. Spindle supported by precision tapered roller bearings. Hardened and ground bedways. Power longitudinal feed allows threading. Standard 1-1/2 in. x 8 TPI spindle mount allows for many aftermarket accessories. Reversing switch included for added versatility. Backlash adjustments provided throughout the carriage. Tailstock is adjustable for taper cuts. Quick-change gear box provides wide range of inch and metric threads
More

JET Lathe with VUE DRO 321110

$6,999.00
CPO Jet JET Lathe with VUE DRO 321110
Free Shipping
/jet-lathe-with-vue-dro/waMnSLOkYxy5TbC36s9hwg==/info
CPO Jet
IN_STOCK ( In stock )
Store not rated
Free Shipping
BDB-1340A Lathe with VUE DRO - 321110. 6 in. 3-Jaw Direct Mount Scroll Chuck with Top Reversing Jaw. 8 in. 4-Jaw Independent Chuck. 12 in. Faceplate. Four-Way Tool Post. Steady and Follow Rest. Metric Change Gear. Headstock Center Sleeve. Threading Dial. Tool Box with Tools. Oil Pan. Tolerance Test Sheet. One of the most popular JET lathes now comes with an enclosed gearbox as a standard feature. Enclosed gearbox design provides smooth, quiet operation. Fast, easy speed changes. Low voltage motor controls. Helical cut headstock gears reduce noise. Change gears allow metric threading. Spindle is supported by precision tapered roller bearings. V-way bed is induction hardened and ground. Gap bed section provided for large diameter work. Independent lead screw and feed rod. T-slotted compound... Less
More

Starrett Ww Collet 70 For...

$17.95
eBay Starrett Ww Collet 70 For Watchmakers Lathe - - 8mm Jewelers Lathe Size
Free Shipping
/starrett-ww-collet-70-for/LFV3p6TABPHuG4-uEVQVyg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
NEW STARRETT WW COLLET Standard 8mm Size This auction is for a single - new Starrett WW collet in the metric size of #70 (7.0 mm). ONE COLLET ONLY! It will fit any standard WW watchmakers lathe such as American Watch Tool Company, Boley, Clement, Derbyshire, Levin or any other built to WW standards. A Full selection of collets makes your lathe most useful. This illustration is just here to catch your eye and open your mind to the advantages of a full set. This auction is for a single collet. Th
More

Starrett Ww Collet 46 For...

$17.95
eBay Starrett Ww Collet 46 For Watchmakers Lathe - - 8mm Jewelers Lathe Size
Free Shipping
/starrett-ww-collet-46-for/ApoxO9rkfsSlhlyMCINmyQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
NEW STARRETT WW COLLET Standard 8mm Size This auction is for a single - new Starrett WW collet in the metric size of #46 (4.6 mm). ONE COLLET ONLY! It will fit any standard WW watchmakers lathe such as American Watch Tool Company, Boley, Clement, Derbyshire, Levin or any other built to WW standards. A Full selection of collets makes your lathe most useful. This illustration is just here to catch your eye and open your mind to the advantages of a full set. This auction is for a single collet. Th
More

Starrett Ww Collet 73 For...

$17.95
eBay Starrett Ww Collet 73 For Watchmakers Lathe - - 8mm Jewelers Lathe Size
Free Shipping
/starrett-ww-collet-73-for/xlzyBkpGrY72bU-XiEC7Bg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
NEW STARRETT WW COLLET Standard 8mm Size This auction is for a single - new Starrett WW collet in the metric size of #73 (73 mm). ONE COLLET ONLY! It will fit any standard WW watchmakers lathe such as American Watch Tool Company, Boley, Clement, Derbyshire, Levin or any other built to WW standards. A Full selection of collets makes your lathe most useful. This illustration is just here to catch your eye and open your mind to the advantages of a full set. This auction is for a single collet. The
More

Starrett Ww Collet 79 For...

$17.95
eBay Starrett Ww Collet 79 For Watchmakers Lathe - - 8mm Jewelers Lathe Size
Free Shipping
/starrett-ww-collet-79-for/8l1gXGOaYXLSy23IZmY-bQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
NEW STARRETT WW COLLET Standard 8mm Size This auction is for a single - new Starrett WW collet in the metric size of #79 (7.9 mm). ONE COLLET ONLY! It will fit any standard WW watchmakers lathe such as American Watch Tool Company, Boley, Clement, Derbyshire, Levin or any other built to WW standards. A Full selection of collets makes your lathe most useful. This illustration is just here to catch your eye and open your mind to the advantages of a full set. This auction is for a single collet. Th
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355