Vintage Scope Mounts Electronics Optics Accessories - Shopping.com

Category

Optics Accessories
Showing results for "vintage scope mounts"
Results 1 - 40 of 1500+

Wheeler Engineering Scope...

$89.99
MidwayUSA Wheeler Engineering Scope Mounting Kit 1
+ $12.39 shipping
/wheeler-engineering-scope/PV3aHjqDZGluuq2hTmowuA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Everything required for a scope mounting project with professional results. Kit contains Alignment Rods, Lapping Bar with Handle, Lapping Compound, Level-Level-Level, Thread Locker, FAT wrench with bits, and hard case. Wheeler Engineering FAT Wrench: A hand driven, click/clutch style torque wrench that is very useful for applying the necessary torque to most firearm and firearm accessory fasteners. The FAT Wrench features a thick ergonomic handle, a standard 1/4 drive tip, and can be used to apply torque from 10 to 65 in-lbs at 5 in-lb increments. Common uses include, but are not limited to; installation of scope ring and base screws, action screws and trigger guard screws. With proper care and use, the FAT Wrench will provide a lifetime of reliable service. Includes 9 bits and a square... Less
More

Wheeler Engineering Scope...

$109.99
MidwayUSA Wheeler Engineering Scope Mounting Combo Kit 1 and 30mm
+ $12.99 shipping
/wheeler-engineering-scope/h9TKY4LCScP-s75gInAKCg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Everything required for a scope mounting project with professional results. Kit contains Alignment Rods, Lapping Bar with Handle, Lapping Compound, Level-Level-Level, Thread Locker, FAT wrench with bits, and hard storagecase. Wheeler Engineering FAT Wrench: A hand driven, click/clutch style torque wrench that is very useful for applying the necessary torque to most firearm and firearm accessory fasteners. The FAT Wrench features a thick ergonomic handle, a standard 1/4 drive tip, and can be used to apply torque from 10 to 65 in-lbs at 5 in-lb increments. Common uses include, but are not limited to; installation of scope ring and base screws, action screws and trigger guard screws. With proper care and use, the FAT Wrench will provide a lifetime of reliable service. Includes 9 bits and a... Less
More

Weaver Scope Mounting Kit

$99.99
MidwayUSA Weaver Scope Mounting Kit
+ $8.39 shipping
/weaver-scope-mounting-kit/xFWuE5_XFwgQc6KQboyrrQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Scope Mounting Kit from Weaver has all the essentials you need when mounting that new scope, or changing out optics. This precision mounting kit is packed full of quality Weaver products that will help you get your favorite scope mounted fast and accurately. Includes Torque wrench (10 bits) Surethread adhesive Modular scope level system Rugged storage case
More

Browning AB3 Integrated Scope...

$52.71
Walmart.com Browning AB3 Integrated Scope Mount System 30mm Ring Diameter, High Ring Height
Free Shipping
/browning-ab3-integrated/D8nZQ9DBbWf73qi02anN1Q==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Browning AB3 Integrated Scope Mount System 30mm Ring Diameter, High Ring Height:Machined from 7000 series aluminum30mm ring diameter High height
More

Aero Precision Ultralight...

$89.99
Brownells Aero Precision Ultralight Extended Scope Mounts - Ultralight 1 Extended Scope Mount Black
+ $7.95 shipping
/aero-precision-ultralight/NEq7TnkKD4cXkPOR0Jxi-g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Featuring a rigid, lightweight design, Aero Precisions' Ultralight Extended Scope Mounts complement many high-end optic platforms. These scope mounts are designed to fit Mil-Spec 1913 Picatinny rails with a cross-slot keyway that offers excellent recoil protection. The Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry. Rear ring is pushed forward 1 for better eye relief Designed for AR type upper receivers 6061 T6 extruded aluminum construction Rigid and lightweight Weight: 3.07oz Mfg: Aero Precision
More

Wheeler Engineering Ultra...

$206.99
MidwayUSA Wheeler Engineering Ultra Scope Mounting Kit Black
+ $9.19 shipping
/wheeler-engineering-ultra/dYKeK-JkPVkZ9uAJSUOJDg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesFeatures the Professional Reticle Leveling System to make sure the scope is level and your crosshairs are perfectly perpendicular Features the Professional Laser Bore Sighter (Green) to align your crosshairs and get you on paper faster Features the FAT Wrench to apply precise inch-lb. pressure on all of your screws Includes 9 bits, 1 socket and a bit holder for all your maintenance needs Comes with thread locker so your screws won’t work their way loose The Ultra Scope Mounting Kit from Wheeler Engineering puts all the best Wheeler scope mounting accessories into one perfect package. With this kit you can level your rifle, level your scope, mount your scope to the rifle, and then coarse sight in your scope with precision and accuracy. No more guess work and “that’s good enough”... Less
More

American Technologies Network...

$109.99
Academy Sports and Outdoors American Technologies Network PS28 Scope Mounting System (0658175906100)
+ $7.25 shipping
/american-technologies/3XLtbDIdLfZNelaAdvyY3g==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
The American Technologies Network PS28 Scope Mounting System helps mount a PS28 scope in front of a day scope with 1 bolt adjustment.
More

Browning AB3 Integrated Scope...

$52.71
Walmart.com Browning AB3 Integrated Scope Mount System 30mm Ring Diameter, High Ring Height
Free Shipping
/browning-ab3-integrated/VGVA21WPn8JdwBN5Gd7b0A==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Browning AB3 Integrated Scope Mount System 30mm Ring Diameter, High Ring Height:Machined from 7000 series aluminum30mm ring diameter High height
More

Starrett Scope Mounting Level

$33.99
MidwayUSA Starrett Scope Mounting Level
+ $4.99 shipping
/starrett-scope-mounting/PFMLhZMAcULy1xBpq_fHkg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This precision level from Starrett is great for leveling your crosshairs when mounting a scope. The level contains 1 vial and is 3-1/2 long. Made from hexagonal stock with convex ends and satin nickel-plated finish.
More

Lsp High Standard Scope Mount...

$29.95
Brownells Lsp High Standard Scope Mount - Black Lsp Scope Mount
+ $7.95 shipping
/lsp-high-standard-scope/wQUuAJsRfqiwKEiOLnx-Sg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The scope and the barrel become one unit to effectively cancel small shifts in zero between the receiver and the barrel for increased accuracy. Thirteen cross-slots provide a wide range of mounting positions; cantilever design centers the weight over the grip for better balance. Cutaway over the receiver allows sufficient scope height for proper functioning and ejection. Fits all factory bull barrels; Weaver-style rings. Mfg: Lsp SPECS: Aluminum, matte finish, black, anodized. 5-1/4 (13.3cm) long. Fits LSP Match Barrels; factory bull barrels require drilling and tapping. Includes instructions and screws.
More

Browning 1-Piece Scope Mount...

$49.99
MidwayUSA Browning 1-Piece Scope Mount with Integral 1 Rings Browning AB3 Matte High
+ $4.99 shipping
/browning-1piece-scope/j3rT1Qw81onJzZmBTcLWFw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Browning's Intergrated Scope Mount System combines the ring and base to give you a single, ultra-rigid unit. Constructed of 7000 series aluminum, the mounting system eliminates alignment problems and the possibility of loose connection between bases and rings. Technical Information Material: Aluminum Ring Height:(measured from base of ring to bottom of scope tube) Low: .400 Medium: .550 High: .600
More

Browning 1-Piece Scope Mount...

$49.99
MidwayUSA Browning 1-Piece Scope Mount with Integral 1 Rings Browning AB3 Matte Medium
+ $4.99 shipping
/browning-1piece-scope/SvMGbLJIrRL7ExYY7gJorg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Browning's Intergrated Scope Mount System combines the ring and base to give you a single, ultra-rigid unit. Constructed of 7000 series aluminum, the mounting system eliminates alignment problems and the possibility of loose connection between bases and rings. Technical Information Material: Aluminum Ring Height:(measured from base of ring to bottom of scope tube) Low: .400 Medium: .550 High: .600
More

Browning 1-Piece Scope Mount...

$49.99
MidwayUSA Browning 1-Piece Scope Mount with Integral 1 Rings Browning AB3 Matte Low
+ $4.99 shipping
/browning-1piece-scope/wfrmpUdkoyccvu0SIl2_7Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Browning's Intergrated Scope Mount System combines the ring and base to give you a single, ultra-rigid unit. Constructed of 7000 series aluminum, the mounting system eliminates alignment problems and the possibility of loose connection between bases and rings. Technical Information Material: Aluminum Ring Height:(measured from base of ring to bottom of scope tube) Low: .400 Medium: .550 High: .600
More

Aero Precision Ultralight...

$89.99
Brownells Aero Precision Ultralight Extended Scope Mounts - Ultralight 30mm Extended Scope Mount Black
+ $7.95 shipping
/aero-precision-ultralight/ZACsRBJ8i4L9Lhxa_KZmtg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Featuring a rigid, lightweight design, Aero Precisions' Ultralight Extended Scope Mounts complement many high-end optic platforms. These scope mounts are designed to fit Mil-Spec 1913 Picatinny rails with a cross-slot keyway that offers excellent recoil protection. The Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry. Rear ring is pushed forward 1 for better eye relief Designed for AR type upper receivers 6061 T6 extruded aluminum construction Rigid and lightweight Weight: 3.07oz Mfg: Aero Precision
More

DNZ 11080 Scope Mount for...

$49.90
Walmart.com DNZ 11080 Scope Mount for Ruger 10/22, Low, Matte
+ $5.97 shipping
/dnz-11080-scope-mount-for/eqPFsJKto0ISFdXu8640Kg==/info
Walmart.com
IN_STOCK ( In stock )
DNZ 11080 Scope Mount for Ruger 10/22, Low, Matte:Machined 1-piece designLightweight Perfect ring alignmentRing placement allows extra eye relief adjustmentUp to 4 times more thread length in rings, a full 1/2
More

Brand Kwik-site Ruger 44...

$59.99
eBay Brand Kwik-site Ruger 44 Scope Mount Base Ksb-ru44 Brand Vintage
Free Shipping
/brand-kwiksite-ruger-44/tXn6PHQmxP6tdllj9JYU0g==/info
eBay
IN_STOCK ( In stock )
Free Shipping
BRAND NEW.. OPENED PACKAGE.. FREE SHIPPING
More

Choate Sks Scope Mount -...

$40.99
Brownells Choate Sks Scope Mount - Steel Sks Scope Mount
+ $7.95 shipping
/choate-sks-scope-mount/B92OUJymVVA-wgOmeCCK0w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
This SKS scope mount from Choate is investment cast out of 4140 Steel. Once installed you can continue to clean you SKS as normal without removing the mount. Mount has enough height to retain use of the open sights. Will require gunsmithing to install. Includes four 8-40 screws. Drill and tapping of the receiver is required. Mfg: Choate SPECS: Includes four (4) 8-40 screws. Hole spacing: 3 center-to-center between the outer mounting holes and 2 between the inner mounting holes.
More

Advanced Technology...

$57.99
MidwayUSA Advanced Technology Weaver-Style Scope Mounting System with Bent Bolt Handle Mosin-Nagant
+ $4.99 shipping
/advanced-technology/68vgg4dDHm5r8ur8ooeXdg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This unique scope mount is made of T-6 aluminum with a black anodized finish. The bolt handle is constructed of stainless steel. This system fits Mosin-Nagants with either a round or octagonal receivers and works with any Weaver-style Rings (sold separately). Includes hardware and detailed instructions. Requires fitting and installation by a qualified gunsmith because the bolt handle must be replaced. Technical InformationMateri al: Hardened Aluminum Scope Base (Weaver Style) Stainless Steel Replacement Bolt Handle Features: Swept back bolt handle design to allow proper cycling of the action when a scope is mounted. Gunsmithing Required: Yes Notes: Drill Bits, Tap and Mounting Screws Included. All Necessary Hardware Needed to Convert Included. Complete Detailed Instructions Included... Less
More

Nikon 835 P Series Scope...

$49.99
Academy Sports and Outdoors Nikon 835 P Series Scope Mount (00018208008353)
+ $7.40 shipping
/nikon-835-p-series-scope/9tiQfLAX9lkWp6zKIR35_Q==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
The Nikon 835 P Series Scope Mount securely attaches an optic to your AR platform's Picatinny rail and is made of alloy material.
More

Aero Precision Ultralight...

$69.99
Brownells Aero Precision Ultralight Scope Mount - Ultralight 1 Scope Mount Black
+ $7.95 shipping
/aero-precision-ultralight/7GbuqAgTkEJva2q9-hNXXg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Featuring a rigid, lightweight design, Aero Precisions Ultralight Scope Mounts complement many high-end optic platforms. Features Designed for AR type upper receivers 6061 T6 extruded aluminium construction MIL-A-Type 3 black hard-coat anodized Ridged and lightweight Weighs 3.1-3.3 ounces Mfg: Aero Precision
More

Williams Scope Mount Drill...

$129.99
MidwayUSA Williams Scope Mount Drill Fixture Steel Black
+ $4.99 shipping
/williams-scope-mount/WpKPppz_IvgFx5aXeN9O9Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This drill fixture can accommodate almost any receiver between the diameters of 0.630 and 1.440, whether its round, flat or octagon. The fixture features a scissoring action that automatically centers itself on the receiver, and offers hole spacing of 0.500, 0.605 or 0.860 for installing most common scope bases. Includes #31 and #28 hardened steel lock bushings for drilling #31 (6-48) and #28 (8-40) thread sizes. Technical InformationNotes: Designed to drill any receiver between diameters of .630 and 1.440 Hole spacing choice of .500, .605 and .860 Comes with #28 and #31 steel lock bushings for drilling #28 and #31 thread sizes
More

Remington 2-Piece Scope...

$28.99
MidwayUSA Remington 2-Piece Scope Mounts with Integral 1 Rings Remington 700 Matte Medium
+ $4.99 shipping
/remington-2piece-scope/cjQra99tC6loFBqogtqPcg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Remington 2-Piece Scope Mounts with Integral Rings are just what you need for your Remington 700 rifle. These ring mounts are constructed of Z2 alloy which is 50% stronger than aluminum, and they are made in the USA so you can be sure that you are getting a high quality product. Technical Information Material: Z2 alloy Fits: All Remington 700 rifles Height: .6875 Notes: Includes Torx screws and a wrench
More

Taurus Weaver-Style Scope...

$53.99
MidwayUSA Taurus Weaver-Style Scope Mount Model 608/44 Blued with 8-3/8 Barrel
+ $4.99 shipping
/taurus-weaverstyle-scope/GdL6CGfFRM1CWx8aDlK94A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weaver-style bases accept any Weaver-style ring. Bases may have more than one cross-slot to offer multiple position options for the ring. These steel bases are designed to allow for the mounting of almost any type of scope, red dot sight or other optical sight to your firearm.
More

XS Lever Scout Scope Mount...

$49.50
MidwayUSA XS Lever Scout Scope Mount Weaver-Style Marlin 1894 Matte
Free Shipping
/xs-lever-scout-scope/OP9yiUJHq3oLwzv3dH0BEQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
These Weaver-Style aluminum scope mounts feature a hard anodized surface and drop-in installation that uses the rear sight dovetail and front receiver screw holes. Note: Will not fit models with octagonal barrels. Matte black finish.Technical InformationMateri al: Anodized aluminumFinish: matte blackFeatures: Allows forward mounting of Scout scopes or red dot sights. Gunsmithing Required: NoNotes: Installs using rear dovetail and front receiver screw holes.
More

Henry Golden Boy Cantilever...

$34.99
Academy Sports and Outdoors Henry Golden Boy Cantilever Scope Mount (0619835400000)
+ $7.25 shipping
/henry-golden-boy/syLxFkF4_n4E7HaOEVHTRQ==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
The Henry Golden Boy Cantilever Scope Mount attaches to the barrel of Henry's Golden Boy riflescopes and features a blued finish.
More

DNZ Hunt Master 2-Piece Scope...

$50.95
MidwayUSA DNZ Hunt Master 2-Piece Scope Mounts with Integral 1 Rings Browning X-Bolt Matte High
+ $4.99 shipping
/dnz-hunt-master-2piece/bU22QkudKRhjxARoLUJUIA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Signature Series DNZ Huntmasters 2-piece Scope Mount is precision machined from solid block 6061 T6 aluminum for an extremely rugged mount that weigh approxamatley 1/3 of steel ring base combos. These easy to install ring mounts require no special tools and provide a rock solid mounting platform with hardened grade eight screws with up to 4x more threads than competing products. This system eliminated the need for selecting a ring and base separate that can loosen over time under the recoil of modern firearms. The Hunt Master series is a solid mount that will will hold true while looking great atop your rifle. Technical Information Material: 6061 T6 Aluminum Ring Height:(measured from base of ring to bottom of scope tube) Low: .480 Medium: .605 High: .687 Notes Integral scope rings... Less
More

B-Square 18554 Weaver Style...

$39.37
Walmart.com B-Square 18554 Weaver Style Scope Mount with Ring for Springfield M1 Garand, Black
+ $5.97 shipping
/bsquare-18554-weaver/q5LhSV20mo170YyL_Ye0gg==/info
Walmart.com
IN_STOCK ( In stock )
The Enfield 1917/P14 Mount attaches to tapped hole in guns rear receiver. It has a standard Dovetail base (replace rear sight). It includes InterLock one-inch rings. The Springfield M-1 Garand mount attaches to rear sight brackets and clamps on to the receiver's left side to allow loading. It has elevation adjustment so any scope can be used. It has a standard Dovetail base includes InterLock one-inch rings. The Springfield 1903, 1903 A3 mount uses Weaver type rings. It replaces the gun's magazine cut off. See-under type allows use of gun's sights. Quick on and off with no change in zero. It has windage and elevation adjustment. It includes InterLock one-inch rings. The SMLE Royal Ordnance mount slips over the gun's receiver and attaches to the gun's ejector screw and rear sight cross... Less
More

DNZ Hunt Master 2-Piece Scope...

$50.95
MidwayUSA DNZ Hunt Master 2-Piece Scope Mounts with Integral 1 Rings Browning X-Bolt Matte Low
+ $4.99 shipping
/dnz-hunt-master-2piece/d9jQyDke0PO4eYWENgBqiQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Signature Series DNZ Huntmasters 2-piece Scope Mount is precision machined from solid block 6061 T6 aluminum for an extremely rugged mount that weigh approxamatley 1/3 of steel ring base combos. These easy to install ring mounts require no special tools and provide a rock solid mounting platform with hardened grade eight screws with up to 4x more threads than competing products. This system eliminated the need for selecting a ring and base separate that can loosen over time under the recoil of modern firearms. The Hunt Master series is a solid mount that will will hold true while looking great atop your rifle. Technical Information Material: 6061 T6 Aluminum Ring Height:(measured from base of ring to bottom of scope tube) Low: .480 Medium: .605 High: .687 Notes Integral scope rings... Less
More

DNZ Hunt Master 2-Piece Scope...

$66.95
MidwayUSA DNZ Hunt Master 2-Piece Scope Mounts with Integral 30mm Rings Browning X-Bolt Matte High
+ $4.99 shipping
/dnz-hunt-master-2piece/xCwKTffubiacdnykT8po4g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Signature Series DNZ Huntmasters 2-piece Scope Mount is precision machined from solid block 6061 T6 aluminum for an extremely rugged mount that weigh approxamatley 1/3 of steel ring base combos. These easy to install ring mounts require no special tools and provide a rock solid mounting platform with hardened grade eight screws with up to 4x more threads than competing products. This system eliminated the need for selecting a ring and base separate that can loosen over time under the recoil of modern firearms. The Hunt Master series is a solid mount that will will hold true while looking great atop your rifle. Technical Information Material: 6061 T6 Aluminum Ring Height:(measured from base of ring to bottom of scope tube) Low: .480 Medium: .605 High: .687 Notes Integral scope rings... Less
More

Vintage Redfield Jr Abla...

$14.75
eBay Vintage Redfield Jr Abla Browning A Bolt Long Action Scope Mount Base 532294
Free Shipping
/vintage-redfield-jr-abla/X7MpZ6yk5YSlaSdOSVVs5w==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Please email questions prior to purchase. I will combine shipping for multiple purchases. I usually utilize the most cost effective method available using USPS; however, if you prefer a faster or more expensive method please contact for a price quote and invoice adjustment prior to payment. Also, I get requests to add additional packing which may increase the weight of an item. Please make these requests prior to payment. The majority of my items come from estates sale lots, auctions, or old st
More

Talley Lightweight 2-Piece...

$49.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Browning X-Bolt Silver Low
+ $4.99 shipping
/talley-lightweight/mb56t-KAMEbb1WpHplJTbQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Height: from bottom of scope tube to receiver Low: Front 0.43, Rear 0.51 Medium: Front 0.53, Rear 0.61 High: Front 0.63, Rear 0.71 Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation
More

TRUGLO Tactical 1-Piece Scope...

$56.99
MidwayUSA TRUGLO Tactical 1-Piece Scope Mount Picatinny-Style with Integral 1 High Rings Matte
+ $4.99 shipping
/truglo-tactical-1piece/AVd0eDawOpiCpi9eom6bDQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This high quality riser from TRUGLO is designed for mounting 1 tube scopes on a Picatinny rail. It is made to raise your accessory or optic by 1.5 which can be very helpful when mounting a scope on an AR style rifle. Integral recoil lug and reversible design make this mount a great choice for your 1 scope. Technical Information Material: Aircraft grade aluminum hardcoated to Mil. Specs. Height: 1.5 Fits any Picatinny-style rail
More

Talley Light Weight Scope...

$39.99
Brownells Talley Light Weight Scope Mount - Remington 700 30mm Medium Scope Mount
+ $7.95 shipping
/talley-light-weight-scope/jdIYcCjv-7AyvZlgh56pdw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8 wide, with four, TORX screws, to keep large scopes from slipping or shifting. Designed by Mel Forbes of New Ultralight Arms. Mfg: Talley SPECS: 7000 series aluminum, black, anodized, matte finish. Accepts 1 dia. scopes, unless otherwise listed in fits column for 30mm dia. scopes. Height from bottom of ring to top of receiver: Low - .400 (10.1mm), Med - .500 (12.7mm). High - .640 (16.3mm), X‑High - .740 (18.8mm). Approx. we
More

Wheeler 1 inch Scope Mounting...

$113.99
Sears Wheeler 1 inch Scope Mounting Kit, Black
Free Shipping
/wheeler-1-inch-scope/WthvtlvvYSZoBim-H1ztUw==/info
Sears
IN_STOCK ( In stock )
Free Shipping
Professional Scope Mounting Kits Complete kit provides everything necessary to mount a scope the correct way, including an instructional DVD. Proper scope installation is critical to the accuracy of your firearm. Get the most accuracy possible out of your gun by ensuring proper scope installation. Alignment and Lapping of rings ensure maximum surface area contact between scope tube and rings.This not only helps the rings hold the scope more securely but also protects your scope from damage misalignment can cause.The Wheeler Alignment Bars, Lapping Bars and Lapping Compound allow you to achieve the perfect fit between scope and rings. Reticle Leveling is also a key component to the accuracy of your set up. Crosshairs that are not properly leveled will result in errors in left/right windage... Less
More

Talley Lightweight 2-Piece...

$49.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Browning X-Bolt Matte Low
+ $4.99 shipping
/talley-lightweight/Vblzj_iGVU-tppaS5kfx7w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Height: from bottom of scope tube to receiver Low: Front 0.43, Rear 0.51 Medium: Front 0.53, Rear 0.61 High: Front 0.63, Rear 0.71 Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation
More

Talley Lightweight 2-Piece...

$58.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Browning X-Bolt Matte High
+ $4.99 shipping
/talley-lightweight/p0FIPrO2pX-_CP5EffAXuw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Height: from bottom of scope tube to receiver Low: Front 0.43, Rear 0.51 Medium: Front 0.53, Rear 0.61 High: Front 0.63, Rear 0.71 Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation
More

Talley Lightweight 2-Piece...

$49.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Browning X-Bolt Gloss Low
+ $4.99 shipping
/talley-lightweight/rThWTgh8oieYHlIv2wNO0A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Height: from bottom of scope tube to receiver Low: Front 0.43, Rear 0.51 Medium: Front 0.53, Rear 0.61 High: Front 0.63, Rear 0.71 Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation
More

Weigand Combat Taurus Tracker...

$29.99
Brownells Weigand Combat Taurus Tracker Scope Mount - Tracker Scope Mount
+ $7.95 shipping
/weigand-combat-taurus/fgQDVi8N48kHd_43SpN89A==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Precision- machined, aluminum scope mount accepts Weaver-style rings to let you mount a scope on your Taurus Tracker. Also great for red-dot optics. Integral recoil lug fits into rear sight notch for a rock solid hold that prevents scope movement. Requires removing rear sight. No drilling or tapping required. Mfg: Weigand Combat SPECS: Aluminum, silver, matte finish. 4½” (11.4cm) long, 5⁄16” (7.8mm) high from bottom to top of mount. 1.3 oz. (36.8g) weight. Includes mounting screws. Fits .22 LR, .22 Mag,, .17 HMR.
More

Talley Lightweight 2-Piece...

$49.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Browning X-Bolt Silver Medium
+ $4.99 shipping
/talley-lightweight/g_F8j886hFPP1BaGz_5EKw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Height: from bottom of scope tube to receiver Low: Front 0.43, Rear 0.51 Medium: Front 0.53, Rear 0.61 High: Front 0.63, Rear 0.71 Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation
More

Leupold Rifleman Weaver-Style...

$19.99
Academy Sports and Outdoors Leupold Rifleman Weaver-Style Scope Mount Rings 2-Pack (0030317558802)
+ $7.25 shipping
/leupold-rifleman/yjLT4lvxz5ihE5S8wwE7ng==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
The Leupold Rifleman Weaver-Style Scope Mount Rings 2-Pack are machined from aircraft-grade aluminum and offer strength and recoil resistance.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp16.facebook.pixel-30381
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp16.facebook.pixel-30381