Vintage Scope Mounts Electronics Optics Accessories - Shopping.com

Category

Optics Accessories
Showing results for "vintage scope mounts"
Results 1 - 40 of 1500+

Nikon M-223 XR Scope Mount

$70.60
Walmart.com Nikon M-223 XR Scope Mount
Free Shipping
/nikon-m223-xr-scope-mount/gUVywNNUa5ireti_alZB5w==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Developed specifically for the M-223 series of scopes, this special mount fits Picatinny rails found atop most flattop ARs. Lightweight alloy construction, with built-in 20-MOA, maximizes elevation for extreme long range shooting.
More

Taurus Weaver-Style Scope...

$53.99
MidwayUSA Taurus Weaver-Style Scope Mount Model 608/44 Blued with 8-3/8 Barrel
+ $4.99 shipping
/taurus-weaverstyle-scope/GdL6CGfFRM1CWx8aDlK94A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weaver-style bases accept any Weaver-style ring. Bases may have more than one cross-slot to offer multiple position options for the ring. These steel bases are designed to allow for the mounting of almost any type of scope, red dot sight or other optical sight to your firearm. Searches for products like these typically include: Optics,Scope Bases & Mounts,Taurus,Taur us 608
More

Wheeler Engineering Scope...

$89.99
MidwayUSA Wheeler Engineering Scope Mounting Kit 1
+ $13.19 shipping
/wheeler-engineering-scope/PV3aHjqDZGluuq2hTmowuA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Everything required for a scope mounting project with professional results. Kit contains Alignment Rods, Lapping Bar with Handle, Lapping Compound, Level-Level-Level, Thread Locker, FAT wrench with bits, and hard case. Wheeler Engineering FAT Wrench: A hand driven, click/clutch style torque wrench that is very useful for applying the necessary torque to most firearm and firearm accessory fasteners. The FAT Wrench features a thick ergonomic handle, a standard 1/4 drive tip, and can be used to apply torque from 10 to 65 in-lbs at 5 in-lb increments. Common uses include, but are not limited to; installation of scope ring and base screws, action screws and trigger guard screws. With proper care and use, the FAT Wrench will provide a lifetime of reliable service. Includes 9 bits and a square... Less
More

Burris AR-PEPR Scope Mount,...

$91.53
Walmart.com Burris AR-PEPR Scope Mount, 34mm 20 MOA Matte Picatinny Tops
Free Shipping
/burris-arpepr-scope/_ZbSQLj-XEjg2kh7TUIfOg==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The Burris AR-P.E.P.R. Scope Mount allows for full-sized scopes to be properly positioned on ARs with Picatinny rail uppers. It's uniquely designed to offer up to 2 of forward scope positioning for optimum eye relief and full field of view. Rings are offered smooth or Picatinny rail-topped for additional accessories. The 34mm scope mount offers 20 MOA cant. No matter how long or large your optic, it will put it in the right. The Burris scope mount is built versatile and rock solid and will enhance the look of your piece while providing a performance that you can count on. It is night hunting friendly, formidable black and keeps your anti-glare needs at the optimum. The scope mount is simple to install, so you can begin using it without missing any action. Try this combination with your... Less
More

Armasight Scope Mounting...

$105.99
Sportsman's Guide Armasight Scope Mounting System 6 #44 for CO - MR and CO - Mini
+ $15.99 shipping
/armasight-scope-mounting/7xVmYPLVSzlwnJs5WgwK5Q==/info
Sportsman's Guide
IN_STOCK ( In stock )
Armasight Scope Mounting System 6 #44 lets you pair up your Armasight CO - MR or CO - Mini Night Vision device to your daylight scope with an objective diameter of 62mm. Armasight Scope Mounting System 6 #44 attaches the Armasight CO-MR or CO-Mini Clip-On Day / Night System directly onto the front bell of ANY day-time scope with objective diameter of 62mm (for example, the Zeiss 3-12 x 56, Swarovski 2.5-10 x 56, and Kahles CSX 3-12 x 56).Compatible with the following Armasight units:CO-MR GEN 2+ SD CO-MR GEN 2+ ID MG CO-MR GEN 2+ HD CO-MR GEN 2+ QS MG CO-Mini GEN 2+ HD CO-Mini GEN 2+ QS CO-Mini GEN 2+ QS MG CO-MR GEN 3 Bravo CO-MR GEN 3 Alpha CO-MR GEN 3P CO-MR GEN 3 Ghost MG CO-Mini GEN 3 Bravo CO-Mini GEN 3+ Alpha CO-Mini GEN 3+ Alpha MG CO-Mini GEN 3P MG CO-Mini GEN 3 Ghost MG CO-Mini... Less
More

Wheeler Engineering Scope...

$104.99
MidwayUSA Wheeler Engineering Scope Mounting Combo Kit 1 and 30mm
+ $12.99 shipping
/wheeler-engineering-scope/h9TKY4LCScP-s75gInAKCg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Everything required for a scope mounting project with professional results. Kit contains Alignment Rods, Lapping Bar with Handle, Lapping Compound, Level-Level-Level, Thread Locker, FAT wrench with bits, and hard storagecase. Wheeler Engineering FAT Wrench: A hand driven, click/clutch style torque wrench that is very useful for applying the necessary torque to most firearm and firearm accessory fasteners. The FAT Wrench features a thick ergonomic handle, a standard 1/4 drive tip, and can be used to apply torque from 10 to 65 in-lbs at 5 in-lb increments. Common uses include, but are not limited to; installation of scope ring and base screws, action screws and trigger guard screws. With proper care and use, the FAT Wrench will provide a lifetime of reliable service. Includes 9 bits and a... Less
More

Aero Precision Ultralight...

$89.99
Brownells Aero Precision Ultralight Extended Scope Mounts - Ultralight 1 Extended Scope Mount Black
+ $7.95 shipping
/aero-precision-ultralight/NEq7TnkKD4cXkPOR0Jxi-g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Featuring a rigid, lightweight design, Aero Precisions' Ultralight Extended Scope Mounts complement many high-end optic platforms. These scope mounts are designed to fit Mil-Spec 1913 Picatinny rails with a cross-slot keyway that offers excellent recoil protection. The Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry. Rear ring is pushed forward 1 for better eye relief Designed for AR type upper receivers 6061 T6 extruded aluminum construction Rigid and lightweight Weight: 3.07oz Mfg: Aero Precision
More

Vintage Redfield 511134 Jr Fn...

$34.99
eBay Vintage Redfield 511134 Jr Fn Scope Mount Base Fn Mauser Action-new In Package
Free Shipping
/vintage-redfield-511134/ORtBBPq2IzxwiOl7EKIssw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
VINTAGE REDFIELD #511134 JR FN SCOPE MOUNT BASE FN MAUSER ACTION-NEW IN PACKAGE
More

ProMag SKS Picatinny Rail...

$29.99
MidwayUSA ProMag SKS Picatinny Rail Scope Mount Steel
+ $4.99 shipping
/promag-sks-picatinny-rail/hkIFzZ0dA9pE1dk6bN5-xw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Promag SKS scope mount rail attaches to the left side of the SKS receiver and provides a solid optics mounting platform. The 5.375 Picatinny-style rail is raised for full use of iron sights with scope and mount in place. The lightweight unit mounts via 4 allen-head screws (included) and is finished in matte black. Technical Information: Installation requires the receiver to be drilled and tapped using a #28 drill and an 8-40 tap Drill and Tap not included Searches for products like these typically include: Optics,Scope Bases & Mounts,Picatinny-S tyle Universal Mounts
More

Armasight Scope Mounting...

$105.99
Sportsman's Guide Armasight Scope Mounting System 3 #42 for CO - MR and CO - Mini
+ $15.99 shipping
/armasight-scope-mounting/YES8SGNtzKnLf6YsdshVrw==/info
Sportsman's Guide
IN_STOCK ( In stock )
Armasight Scope Mounting System 3 #42 lets you pair up your Armasight CO - MR or CO - Mini Night Vision device to your daylight scope with objective diameters between 42mm and 50mm. Armasight Scope Mounting System 3 #42 attaches the Armasight CO-MR or CO-Mini Clip-On Day / Night System directly onto the front bell of ANY day-time scope with objective diameters between 42mm and 50mm (like the Leupold 3.5-10 x 40, Zeiss 1.5-6 x 42, Swarovski PV-N 2.5-10 x 42, or Meopta Artemis 3000 3-9 x 42).Compatible with the following Armasight units:CO-MR GEN 2+ SD CO-MR GEN 2+ ID MG CO-MR GEN 2+ HD CO-MR GEN 2+ QS MG CO-Mini GEN 2+ HD CO-Mini GEN 2+ QS CO-Mini GEN 2+ QS MG CO-MR GEN 3 Bravo CO-MR GEN 3 Alpha CO-MR GEN 3P CO-MR GEN 3 Ghost MG CO-Mini GEN 3 Bravo CO-Mini GEN 3+ Alpha CO-Mini GEN 3+ Alpha... Less
More

Weaver Deluxe Scope Mounting...

$114.99
MidwayUSA Weaver Deluxe Scope Mounting Kit with 1 Lapping Tools
+ $11.59 shipping
/weaver-deluxe-scope/RdPpFExTIZl_jIUk79rAXA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Scope mounting kit from Weaver has everything you could want when mounting that new scope, or changing out optics. The Deluxe scope mounting kit comes with 1 lapping tool and ring alignment pins. This precision mounting kit is packed full of quality Weaver products that will help you get your favorite scope mounted fast and accurately. Includes Torque wrench (10 bits) Surethread adhesive Modular Scope level system Lapping bar Lapping compound Rings alignment pins Rugged storage case Searches for products like these typically include: Optics,Scope Mounting Tools,Wrenches, Alignment Kits & Other Tools,Alignment Kits
More

Aero Precision Ultralight...

$89.99
Brownells Aero Precision Ultralight Extended Scope Mounts - Ultralight 30mm Extended Scope Mount Black
+ $7.95 shipping
/aero-precision-ultralight/ZACsRBJ8i4L9Lhxa_KZmtg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Featuring a rigid, lightweight design, Aero Precisions' Ultralight Extended Scope Mounts complement many high-end optic platforms. These scope mounts are designed to fit Mil-Spec 1913 Picatinny rails with a cross-slot keyway that offers excellent recoil protection. The Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry. Rear ring is pushed forward 1 for better eye relief Designed for AR type upper receivers 6061 T6 extruded aluminum construction Rigid and lightweight Weight: 3.07oz Mfg: Aero Precision
More

Browning 2-Piece Scope Mount...

$49.99
MidwayUSA Browning 2-Piece Scope Mount with Integral 1 Rings Browning AB3 Matte Low
+ $4.99 shipping
/browning-2piece-scope/wfrmpUdkoyccvu0SIl2_7Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Browning's Intergrated Scope Mount System combines the ring and base to give you a single, ultra-rigid unit. Constructed of 7000 series aluminum, the mounting system eliminates alignment problems and the possibility of loose connection between bases and rings. Technical Information Material: Aluminum Ring Height:(measured from base of ring to bottom of scope tube) Low: .400 Medium: .550 High: .600 Searches for products like these typically include: Optics,Scope Bases & Mounts,Browning, Browning A-Bolt III (AB3)
More

Armasight Scope Mounting...

$95.99
Sportsman's Guide Armasight Scope Mounting System 1 #40 for CO - MR or CO - Mini
+ $13.99 shipping
/armasight-scope-mounting/qHB-pNqri1e_bzPbKIC7cw==/info
Sportsman's Guide
IN_STOCK ( In stock )
Armasight Scope Mounting System 1 #40 lets you pair up your Armasight CO - MR or CO - Mini Night Vision device to your daylight scope with objective diameters between 25.4mm and 30mm. Armasight Scope Mounting System 1 #40 attaches the Armasight CO-MR or CO-Mini Clip-On Day / Night System directly onto the front bell of ANY day-time scope with objective diameters between 25.4mm and 30mm (like the Leupold 1.5-5x20 PR, Leupold 1.5-5x20 MR / T M2, or Zeiss 1.1-4x24T). Compatible with the following Armasight units:CO-MR GEN 2+ SD CO-MR GEN 2+ ID MG CO-MR GEN 2+ HD CO-MR GEN 2+ QS MG CO-Mini GEN 2+ HD CO-Mini GEN 2+ QS CO-Mini GEN 2+ QS MG CO-MR GEN 3 Bravo CO-MR GEN 3 Alpha CO-MR GEN 3P CO-MR GEN 3 Ghost MG CO-Mini GEN 3 Bravo CO-Mini GEN 3+ Alpha CO-Mini GEN 3+ Alpha MG CO-Mini GEN 3P MG... Less
More

Lsp High Standard Scope Mount...

$29.95
Brownells Lsp High Standard Scope Mount - Black Lsp Scope Mount
+ $7.95 shipping
/lsp-high-standard-scope/wQUuAJsRfqiwKEiOLnx-Sg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The scope and the barrel become one unit to effectively cancel small shifts in zero between the receiver and the barrel for increased accuracy. Thirteen cross-slots provide a wide range of mounting positions; cantilever design centers the weight over the grip for better balance. Cutaway over the receiver allows sufficient scope height for proper functioning and ejection. Fits all factory bull barrels; Weaver-style rings. Mfg: Lsp SPECS: Aluminum, matte finish, black, anodized. 5-1/4 (13.3cm) long. Fits LSP Match Barrels; factory bull barrels require drilling and tapping. Includes instructions and screws.
More

Armasight Scope Mounting...

$105.99
Sportsman's Guide Armasight Scope Mounting System 4 #43 for CO - MR and CO - Mini
+ $15.99 shipping
/armasight-scope-mounting/PNqbs2i_fbe-t69F9Ls45w==/info
Sportsman's Guide
IN_STOCK ( In stock )
Armasight Scope Mounting System 4 #43 lets you pair up your Armasight CO - MR or CO - Mini Night Vision device to your daylight scope with objective diameters between 56mm and 58.7mm. Armasight Scope Mounting System 4 #43 attaches the Armasight CO-MR or CO-Mini Clip-On Day / Night System directly onto the front bell of ANY day-time scope with objective diameters between 56mm and 58.7mm (like the Zeiss 2.5 10 x 50, Schmidt & Bender 3-12 x 50, Leupold 4.4-14 x 50, or Leupold VX-III 3.5-10 x 50).Compatible with the following Armasight units:CO-MR GEN 2+ SD CO-MR GEN 2+ ID MG CO-MR GEN 2+ HD CO-MR GEN 2+ QS MG CO-Mini GEN 2+ HD CO-Mini GEN 2+ QS CO-Mini GEN 2+ QS MG CO-MR GEN 3 Bravo CO-MR GEN 3 Alpha CO-MR GEN 3P CO-MR GEN 3 Ghost MG CO-Mini GEN 3 Bravo CO-Mini GEN 3+ Alpha CO-Mini GEN 3+... Less
More

Browning A Bolt Millett Scope...

$26.66
eBay Browning A Bolt Millett Scope Mount 20 Years Old - Still In Package ------------
Free Shipping
/browning-a-bolt-millett/QkuAgA-va7NKYpt2Aw0NPw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Hello--I don't really know much about these things, but here I have for your this vintage, yet new in the package set o scope mounts for the Browning A Bolt rifle, marked medium right hand, says on pkg std turn-in, I don't know what that means, but I bet you do-Check this Out ----- I stand behind everything I sell on here 100%--- Look at my feedback, I look forward to you adding to it :) Please feel free to check out the other treasures i have listed, as theres no telling what i will have from
More

Advanced Technology...

$54.99
MidwayUSA Advanced Technology Weaver-Style Scope Mounting System with Bent Bolt Handle Mosin-Nagant
+ $4.99 shipping
/advanced-technology/68vgg4dDHm5r8ur8ooeXdg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This unique scope mount is made of T-6 aluminum with a black anodized finish. The bolt handle is constructed of stainless steel. This system fits Mosin-Nagants with either a round or octagonal receivers and works with any Weaver-style Rings (sold separately). Includes hardware and detailed instructions. Requires fitting and installation by a qualified gunsmith because the bolt handle must be replaced. Technical InformationMateri al: Hardened Aluminum Scope Base (Weaver Style) Stainless Steel Replacement Bolt Handle Features: Swept back bolt handle design to allow proper cycling of the action when a scope is mounted. Gunsmithing Required: Yes Notes: Drill Bits, Tap and Mounting Screws Included. All Necessary Hardware Needed to Convert Included. Complete Detailed Instructions Included... Less
More

XS Lever Scout Scope Mount...

$63.90
MidwayUSA XS Lever Scout Scope Mount Weaver-Style Marlin 444P, 1895 Matte
Free Shipping
/xs-lever-scout-scope/MLDrKIEo161ksPJWa3iWaA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
These Weaver-Style aluminum scope mounts feature a hard anodized surface and drop-in installation that uses the rear sight dovetail and front receiver screw holes. Matte Technical InformationMateri al: Anodized aluminum Finish: matte black Features: Allows forward mounting of Scout scopes or red dot sights. Gunsmithing Required: No Notes: Installs using rear dovetail and front receiver screw holes. Searches for products like these typically include: Optics,Scope Bases & Mounts,Marlin,Marl in 1895,1-Piece
More

Choate Sks Scope Mount -...

$40.99
Brownells Choate Sks Scope Mount - Steel Sks Scope Mount
+ $7.95 shipping
/choate-sks-scope-mount/B92OUJymVVA-wgOmeCCK0w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
This SKS scope mount from Choate is investment cast out of 4140 Steel. Once installed you can continue to clean you SKS as normal without removing the mount. Mount has enough height to retain use of the open sights. Will require gunsmithing to install. Includes four 8-40 screws. Drill and tapping of the receiver is required. Mfg: Choate SPECS: Includes four (4) 8-40 screws. Hole spacing: 3 center-to-center between the outer mounting holes and 2 between the inner mounting holes.
More

Talley Lightweight 2-Piece...

$46.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Cooper 21, 57 Kimber 82, 84 Matte Medium
+ $4.99 shipping
/talley-lightweight/_ZXYRAKjICo6kaqZDGkMDQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Height: from bottom of ring opening to rifle receiver Low: .400 Medium: .500 High: .600 Extra-High: .800 Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Searches for products like these typically include: Optics,Scope Bases & Mounts,Cooper,Coop er 21,Mounting Systems
More

Sun Optics M1A / M14 Receiver...

$39.99
Sportsman's Guide Sun Optics M1A / M14 Receiver Scope Mount
+ $9.99 shipping
/sun-optics-m1a-m14/KzcfUCk8h8MFMpEjph2L_w==/info
Sportsman's Guide
IN_STOCK ( In stock )
Rugged M1A / M14 Receiver Scope Mount. Secure your optics! This must-have Mount still allows for use with iron sights.1-Pc. design, machined from solid aluminum Top rail locks into the charger guide dovetail Adjustable mounting bolt provides a solid foundation Built to accept Picatinny or Weaver style scope rings Black anodized finish. No gunsmithing required. Order Up! Gender: Unisex.
More

Aero Precision Ultralight Spr...

$94.99
Brownells Aero Precision Ultralight Spr Scope Mounts - Ultralight 30mm Spr Scope Mount Black
+ $7.95 shipping
/aero-precision-ultralight/61sHZymmbQJc5a7fQ5xlxA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Featuring a rigid, lightweight design, Aero Precisions Ultralight SPR (Special Project Rifle) Scope Mounts complements many high-end optic platforms. These scope mounts are designed to fit Mil-Spec 1913 Picatinny rails with a cross-slot keyway that offers excellent recoil protection. These Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry. Rear ring is pushed forward 2 for better eye relief Designed for AR type upper receivers 6061 T6 extruded aluminum construction Rigid and lightweight Weight: 3.36oz Mfg: Aero Precision
More

Burris Scope Mount Base, Rem...

$7.95
eBay Burris Scope Mount Base, Rem 700 Long Action Left Hand
+ $4.00 shipping
/burris-scope-mount-base/JfMJvwJGy74SMuylHcqsVw==/info
eBay
IN_STOCK ( In stock )
On Offer: A new old stock Burris Scope Mount Base for a Remington Left Hand Long Action. Mount Base uses Universal turn out (Leopold) style rings.Most items I list are vintage or antique and as such are not perfect. I do my best to describe the item clearly and fairly as regards its condition, but I am not an expert on all the items . If after reading the description and reviewing the pictures, one has a question on condition, please contact me prior to bidding. If one purchases more than one i
More

XS Lever Scout Scope Mount...

$63.90
MidwayUSA XS Lever Scout Scope Mount Weaver-Style Marlin 1894 Matte
Free Shipping
/xs-lever-scout-scope/OP9yiUJHq3oLwzv3dH0BEQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
These Weaver-Style aluminum scope mounts feature a hard anodized surface and drop-in installation that uses the rear sight dovetail and front receiver screw holes. Note: Will not fit models with octagonal barrels. Matte black finish.Technical InformationMateri al: Anodized aluminumFinish: matte blackFeatures: Allows forward mounting of Scout scopes or red dot sights. Gunsmithing Required: NoNotes: Installs using rear dovetail and front receiver screw holes. Searches for products like these typically include: Optics,Scope Bases & Mounts,Marlin,Marl in 1894,1-Piece
More

Aero Precision Ultralight...

$74.99
Brownells Aero Precision Ultralight Scope Mount - Ultralight 1 Scope Mount Black
+ $7.95 shipping
/aero-precision-ultralight/7GbuqAgTkEJva2q9-hNXXg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Featuring a rigid, lightweight design, Aero Precisions Ultralight Scope Mounts complement many high-end optic platforms. Features Designed for AR type upper receivers 6061 T6 extruded aluminium construction MIL-A-Type 3 black hard-coat anodized Ridged and lightweight Weighs 3.1-3.3 ounces Mfg: Aero Precision
More

Talley Lightweight 1-Piece...

$54.99
MidwayUSA Talley Lightweight 1-Piece Scope Mount with Integral 1 Rings Traditions Matte Medium
+ $4.99 shipping
/talley-lightweight/2-LYSniy7BMAgZb4fd2EkA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Aluminum mounts are lightweight and sturdy, with integral rings that create a seamless link between scope and firearm. Attachment screws and Allen wrench included. Technical InformationMateri al: AluminumRing Height: (from bottom of ring opening to rifle receiver) Low: .400Medium: .500High: .600Notes: Includes attachment screws and allen wrench Searches for products like these typically include: Optics,Scope Bases & Mounts, Traditions,All Traditions In-Line & Bolt Action Rifles
More

Talley Lightweight 2-Piece...

$46.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Remington 7 Matte Low
+ $4.99 shipping
/talley-lightweight/36i5rtEsYOtdtWe24nW10w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: AluminumRing Height: from bottom of ring opening to rifle receiverLow: .400Medium: .500High: .600Notes: Includes attachment screws and allen wrench Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 7,Mounting Systems
More

Talley Lightweight 2-Piece...

$46.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Cooper 22 Matte Low
+ $4.99 shipping
/talley-lightweight/3GAlBtbtQlliNYZBlD2BnA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: Aluminum Ring Height: from bottom of ring opening to rifle receiver Low: .400 Medium: .500 Notes: Includes attachment screws and allen wrench Searches for products like these typically include: Optics,Scope Bases & Mounts,Cooper,Coop er 22,2-Piece,Rear & Front Sets
More

Arsenal, Inc. Optimized...

$119.99
MidwayUSA Arsenal, Inc. Optimized Picatinny-Style Scope Mount AK-47, AK-74 Side Rail Matte
+ $4.99 shipping
/arsenal-inc-optimized/4bSx9SWLZi_b44VAyFgGSw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Finally, a repeatable quick-release picatinny rail scope mount for your AK variant! The KV-04S features an adjustable locking mechanism that attaches securely to all military- standard AK side rails, and allows for easy removal and reattachment without tools or loss of zero. The 5.25-inch Picatinny rail section is centered over the bore axis, and can be reversed by the user for compatibility with hinged AK dust covers. The rail section and mount body are machined from aluminum alloy, with steel locking mechanism parts. Weighs just 7.7 ounces.This is the must-have item if you are looking to mount a scope to your AK variant in the most accurate and solid way possible. The KV-04S AK Scope mount provides a rigid platform with a Picatinny rail system (the standardized mounting platform for... Less
More

Aero Precision Ultralight...

$79.99
Brownells Aero Precision Ultralight Scope Mount - Ultralight 30mm Scope Mount Black
+ $7.95 shipping
/aero-precision-ultralight/cifeiTM5rCrL1-ttKguVQA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Featuring a rigid, lightweight design, Aero Precisions Ultralight Scope Mounts complement many high-end optic platforms. Features Designed for AR type upper receivers 6061 T6 extruded aluminium construction MIL-A-Type 3 black hard-coat anodized Ridged and lightweight Weighs 3.1-3.3 ounces Mfg: Aero Precision
More

Talley Lightweight 2-Piece...

$58.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Browning X-Bolt Silver Medium
+ $4.99 shipping
/talley-lightweight/49KbNBiBFuwXY4C22mSO6A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Height: from bottom of scope tube to receiver Low: Front 0.43, Rear 0.51 Medium: Front 0.53, Rear 0.61 High: Front 0.63, Rear 0.71 Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Searches for products like these typically include: Optics,Scope Bases & Mounts,Browning, Browning X-Bolt
More

TRUGLO Tactical 1-Piece Scope...

$56.99
MidwayUSA TRUGLO Tactical 1-Piece Scope Mount Picatinny-Style with Integral 1 High Rings Matte
+ $4.99 shipping
/truglo-tactical-1piece/AVd0eDawOpiCpi9eom6bDQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This high quality riser from TRUGLO is designed for mounting 1 tube scopes on a Picatinny rail. It is made to raise your accessory or optic by 1.5 which can be very helpful when mounting a scope on an AR style rifle. Integral recoil lug and reversible design make this mount a great choice for your 1 scope. Technical Information Material: Aircraft grade aluminum hardcoated to Mil. Specs. Height: 1.5 Fits any Picatinny-style rail Searches for products like these typically include: Optics,Scope Bases & Mounts,AR-15,Flatt op
More

Vintage Redfield Jr Abla...

$14.25
eBay Vintage Redfield Jr Abla Browning A Bolt Long Action Scope Mount Base 532294
Free Shipping
/vintage-redfield-jr-abla/X7MpZ6yk5YSlaSdOSVVs5w==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Please email questions prior to purchase. I will combine shipping for multiple purchases. I usually utilize the most cost effective method available using USPS; however, if you prefer a faster or more expensive method please contact for a price quote and invoice adjustment prior to payment. Also, I get requests to add additional packing which may increase the weight of an item. Please make these requests prior to payment. The majority of my items come from estates sale lots, auctions, or old st
More

Talley Lightweight 2-Piece...

$46.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Cooper 22 Matte Medium
+ $4.99 shipping
/talley-lightweight/BmH0ig9z6zbge1R2dF2eVA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: Aluminum Ring Height: from bottom of ring opening to rifle receiver Low: .400 Medium: .500 Notes: Includes attachment screws and allen wrench Searches for products like these typically include: Optics,Scope Bases & Mounts,Cooper,Coop er 22,2-Piece,Rear & Front Sets
More

Talley Lightweight 2-Piece...

$58.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Browning X-Bolt Silver High
+ $4.99 shipping
/talley-lightweight/RSX0ww5QjJSMRJUxHzdgDA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Height: from bottom of scope tube to receiver Low: Front 0.43, Rear 0.51 Medium: Front 0.53, Rear 0.61 High: Front 0.63, Rear 0.71 Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Searches for products like these typically include: Optics,Scope Bases & Mounts,Browning, Browning X-Bolt
More

Talley Lightweight 2-Piece...

$46.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Remington 7 Matte Medium
+ $4.99 shipping
/talley-lightweight/hd5cZDnyBWqwtuvM5eqKUA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: AluminumRing Height: from bottom of ring opening to rifle receiverLow: .400Medium: .500High: .600Notes: Includes attachment screws and allen wrench Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 7,Mounting Systems
More

Talley Lightweight 2-Piece...

$58.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Browning X-Bolt Silver Low
+ $4.99 shipping
/talley-lightweight/mb56t-KAMEbb1WpHplJTbQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Height: from bottom of scope tube to receiver Low: Front 0.43, Rear 0.51 Medium: Front 0.53, Rear 0.61 High: Front 0.63, Rear 0.71 Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Searches for products like these typically include: Optics,Scope Bases & Mounts,Browning, Browning X-Bolt
More

Talley Lightweight 2-Piece...

$46.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Remington 7 Matte Low
+ $4.99 shipping
/talley-lightweight/BHly5NoAix7eguoFCWEoVg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: AluminumRing Height: from bottom of ring opening to rifle receiverLow: .400Medium: .500High: .600Notes: Includes attachment screws and allen wrench Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 7,Mounting Systems
More

Talley Lightweight 2-Piece...

$46.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Remington 700 Matte Low
+ $4.99 shipping
/talley-lightweight/1xVHlNJBq3HFXD1pxBH2Uw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Extra-Low: Front is .30, Rear is .410 Low: .400 Medium: .500 High: .600 Extra-High: .800 Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2017 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443
http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443