velleman amplifier

This small amplifier is constructed around the TDA1521 IC, capable of delivering 2 x 15W RMS (into 4 ohms) or 2 x 10W RMS (into 8 ohms). Thermal and short circuit protection. THD: .07% (1W/1 kHz). Frequency response: 7 to 60,000Hz (-3dB).

• Both digital and analog inputs are format converted and pixel re-scaled. A large range of formats and resolutions will easily match the native resolution of your display to ensure highest picture quality. • DVI/HDCP/HDMI compliant input: Operates at video bandwidths of up to 165Mhz (Up to WUXGA @60Hz) • Supports digital HD output up to 1080p • Integrated 8-bit triple-ADC/PLL. • Integrated DVI/HDCP/HDMI compliant receiver. • Dual high quality scaling engines. • Dual 3-D motion adaptive de-interlacers with smooth low-angle edge. • Automatic 3:2 pull-down & 2:2 pull-down detection and recovery. • High performance frame rate conversion engine. • The Proprietary Advanced Color Engine technology gives: Brilliant and fresh color, Intensified contrast and details, Vivid skin tone, Sharp edge,... Less

This small amplifier is constructed around the IC, capable of delivering 7 watts music power into 4 ohms - 4 watts RMS 4 ohm load and 2 watts RMS 8 ohms. The IC is thermally and short circuit protected.

200W MONO / STEREO AMPLIFIER

This 1-in 4-out component video/audio distribution amplifier is perfect for sending a single High Definition video and audio signal to 4 separate devices. You can use it to send HD video to several different televisions with no signal loss or use it for multiple dubbing projects. This distribution amplifier is able to be mounted on a wall and features both Y, Pb, Pr Component video and Right-Left audio. - HD, HDTV, High Definition, High-Definition, HiDef, Hi-Def, HighDef, High Def, 4 1-in, 1 - in 4-out 4 - out, 1-in/4-out, distribution, amp, amplifier, splitter, splitters, amplifiers -

This small amplifier is constructed around the IC, capable of delivering 7 watts music power into 4 ohms - 4 watts RMS 4 ohm load and 2 watts RMS 8 ohms. The IC is thermally and short circuit protected.

The ADA-1500 gives you the power you need to create the loudest, cleanest system you can have. No clipping, no overheating, and you never run out of dynamic headroom! The massive analog power supply partners with the Axiom Digital Amplifier to exceed 90% efficiency: compare that to the typical Class A/B design you find in most amplifiers that waste nearly half the output from the amplifier in heat! Think about the numbers: a typical wall plug is capable of producing 1800 watts on a regular 15 amp circuit. The Axiom Digital Amplifier is so efficient, you can easily achieve 1500 watts of total output: approximately double what a Class A/B design can provide. Configurable from 2-8 channels, depending on your needs. 650 watts RMS per channel 4 Ohms

This 1-in 4-out component video/audio distribution amplifier is perfect for sending a single High Definition video and audio signal to 4 separate devices. You can use it to send HD video to several different televisions with no signal loss or use it for multiple dubbing projects. This distribution amplifier is able to be mounted on a wall and features both Y, Pb, Pr Component video and Right-Left audio. - HD, HDTV, High Definition, High-Definition, HiDef, Hi-Def, HighDef, High Def, 4 1-in, 1 - in 4-out 4 - out, 1-in/4-out, distribution, amp, amplifier, splitter, splitters, amplifiers -

We will BEAT, MATCH and CRUSH all competitor pricing! THE PLC DEPOT - Its that simple! 1.855.PLC.DEPOT (752.3376) If you wish to keep your identity safe let us know and we will make this a private listing before you bid on it! Just another way to being safe while buying from us! Business hours 365 DAYS A YEAR! Lust Electronics VF1408M,FA,BR1 Servo Amplifier Retails for $2,900.00 INTERNATIONAL BUYERS SUBJECT TO THEIR COUNTRIES BROKERAGE AND DUTIES. OVERNIGHT SHIPPING AVAILABLE AT BUYERS EXPENS

If a stereo lacks a phono input, it will require an RIAA preamplifier in order to properly work with a turntable. Build your own with this easy-to-assemble kit from Velleman!

The WCS In-Building PRO Dual Band Repeater Kit is compatible with all US mobile phone carriers and effectively provides a strong and reliable phone signal in places with poor reception. The WCS In-Building PRO kit comes with everything you need to boost coverage in your area! This product is simple to install, comes with 100% free technical support and is posted from the US.

This 1-in 4-out component video/audio distribution amplifier is perfect for sending a single High Definition video and audio signal to 4 separate devices. You can use it to send HD video to several different televisions with no signal loss or use it for multiple dubbing projects. This distribution amplifier is able to be mounted on a wall and features both Y, Pb, Pr Component video and Right-Left audio. - HD, HDTV, High Definition, High-Definition, HiDef, Hi-Def, HighDef, High Def, 4 1-in, 1 - in 4-out 4 - out, 1-in/4-out, distribution, amp, amplifier, splitter, splitters, amplifiers -

This 1-in 4-out component video/audio distribution amplifier is perfect for sending a single High Definition video and audio signal to 4 separate devices. You can use it to send HD video to several different televisions with no signal loss or use it for multiple dubbing projects. This distribution amplifier is able to be mounted on a wall and features both Y, Pb, Pr Component video and Right-Left audio. - HD, HDTV, High Definition, High-Definition, HiDef, Hi-Def, HighDef, High Def, 4 1-in, 1 - in 4-out 4 - out, 1-in/4-out, distribution, amp, amplifier, splitter, splitters, amplifiers -

Like all Crown amps the defining characteristic of the Macro-Tech Series is sonic accuracy. A tight rock-solid low end with smooth detailed highs and a well-defined midrange. In short the most accurate reproduction of an audio signal youíve ever heard. And because we put the quality of sound above all else a Crown is the most coveted amplifier in the business.

Features: Number of Channels: 1 Max Power (Watts): 2400 RMS @ 1 Ohm (Watts): 2400 RMS @ 2 Ohm (Watts): 950 RMS @ 4 Ohm (Watts): 700 Bass Knob Included: Yes Total Harmonic Distortion: 0.05% Frequency Response: 15-250kHz Signal-to-Noise Ratio: 100dB Input Sensitivity: 250mV-6V 1 Ohm Stable Class D Monoblocks MOSFET PWM Power Supply Three-Way Protection Circuitry Variable 12dB 40-150Hz Low Pass Filter Variable 12dB 20-50Hz Subsonic Filter Variable 45Hz 12dB Bass Boost 180° Phase Switch Strapable for Double Power w/ 2 ohm Pre-Amp Low-Level Outputs Remote Mount Gain Control Include 4 gauge power and ground wiring is required for installation Nickel-plated RCA level inputs Nickel-plated screw terminals Heavy duty aluminum alloy heat-sink LED power (green) and protect (red) indicators... Less

5-channel Class Ab I Series Car AmplifierRms Power Rating: 4 Ohms: 65 Watts X 4 Chan. + 250 X 1 Chan.2 Ohms: 90 Watts X 4 Chan. + 400 X 1 Chan.Bridged, 4 Ohms: 180 Watts X 2 Chan. + 400 X 1 Chan. @ 2 OhmsCea Power Rating @ 14.4v: 2 Ohms: 100 Watts X 4 Chan. + 425 X 1 Chan. Pulse Width Modulated Mosfet Power SupplyLed Status IndicatorFully Adjustable Bass Eq (0-18 Db @ 40 Hz)Soft Delay Remote Turn On/off Circuit Toeliminate Pops And Clicks5/4/3/2/1 Channel OperationLow Level Line Inputs And Outputs3-way System Protection Circuitry (thermal, Dc, And Speaker Short Protection) Remote Bass Level Sold SeparatelyHeavy Duty Aluminum Finned Heatsink For Extreme Heat DissipationSilver -plated Rca Level InputsSilver- plated Screw TerminalsInput Sensitivity: 0.5v-4.0vVariable High-pass Filter (40-250... Less

Like all Crown amps the defining characteristic of the Macro-Tech Series is sonic accuracy. A tight rock-solid low end with smooth detailed highs and a well-defined midrange. In short the most accurate reproduction of an audio signal youíve ever heard. And because we put the quality of sound above all else a Crown is the most coveted amplifier in the business.

Need one killer guitar amp that can do it all? Look no farther than the Line 6 DT25 guitar amplifier half stack. Combining the Bogner-designed DT25 amp head with the DT25 cabinet, this setup emulates a roomful of famous classic amps with Line 6's legendary HD amp-modeling technology. And since the DT Series utilizes real, reconfigurable tube circuits, it's more than just modeling. With four customizable voicings that you can tweak right from the front panel, it's never been easier to achieve any tone you can dream up.

VELLEMAN K7000 SIGNAL TRACER/INJECTOR KIT. This signal tracer /injector has been designed to inject or detect a specific signal into an audio circuit in need of repair (such as amplifiers, radios, tone controls, ...) so as to detect the fault. In this way problems can be traced more easily. The signal tracer may also be used as a simple monitor or amplifier.

Features: Number of Channels: 1 Max Power (Watts): 6000 RMS @ 1 Ohm (Watts): 3200 RMS @ 2 Ohm (Watts): 2500 RMS @ 4 Ohm (Watts): 1700 Bass Knob Included: Yes Frequency Response: 15-250kHz Signal-to-Noise Ratio: 100dB Input Sensitivity: 250mV-6V 1 Ohm Stable Class D Monoblocks MOSFET PWM Power Supply Three-Way Protection Circuitry Total Harmonic Distortion: 0.05% Variable 12dB 40-150Hz Low Pass Filter (D) Variable 12dB 20-50Hz Subsonic Filter (D) Variable 45Hz 12dB Bass Boost (D) 180° Phase Switch (D) Strapable for Double Power w/ 2 ohm (D) Pre-Amp Low-Level Outputs Remote Mount Gain Control Include 4 gauge power and ground wiring is required for installation Heavy duty aluminum alloy heat-sink Nickel-plated RCA level inputs Nickel-plated screw terminals Mono channel operation Dimensions:... Less

General Features:2-channel Fps Series Symmetric Car AmplifierRms Power Rating(14.4v):4 Ohms: 155 Watts X 2 Chan.2 Ohms: 200 Watts X 2 Chan.1 Ohm: 300 Watts X 2 Chan.Bridged, 4 Ohms: 410 Watts X 1 Chan.Bridged, 2 Ohms: 600 Watts X 1 Chan.Progressive Controlled Cooling System Regulates Amplifier TemperatureLed Power (green) And Protect (red) IndicatorsVariabl e Bass Boost (0 To +9 Db Bass Boost At 50 Hz)Wired Bass Knob IncludedSoft Start Turn-on2 Or Mono Channel Operation4-way Protection Circuitry (thermal, Overload, And Speaker Short Protection, Polarity Reversal)Heavy Duty Aluminum Alloy Heat-sink For Extreme Heat DissipationNickel -plated Rca Level InputsNickel- plated Screw TerminalsVariable High-pass Filter (50-5000 Hz, 24 Db/octave) Variable Low-pass Filter (50-5000 Hz, 24... Less

Amplifier kits and modules are great for an audio project but you often find that you need a volume control and preferably also tone control. This kit comes complete with all input and output connections and potentiometers.

orangesrc store Features: 4 Pack Microphone for Camera with 45 Audio Cable 45 All-in-one Audio Cable with Amplifier and Microphone Type 45 All-in-one Audio Cable with Amplifier and Microphone External MIC, RCA Male and Female, RCA Female for Audio, DC Power Male and Female with Power Pass Thru We accept payment by Paypal, all major Credit card, Debit Card. Please make sure to leave ebay item number with payment. If any special requirement needs, please leave a note while check out. Payments

This small amplifier is constructed around the TDA2003 IC, capable of delivering 4W RMS at 4 ohms. The IC is completely thermally and short-circuit protected. A conventional 8-18 VDC power supply is required and sold separately.

General Features: Monoblock Gorilla Series Car AmplifierRms Power Rating:4 Ohms: 1700 Watts X 1 Chan.2 Ohms: 2500 Watts X 1 Chan.1 Ohm: 3200 Watts X 1 Chan.Max Power Output: 6000 Watts X 1 Chan.Wired Bass Level Control IncludedPulse Width Modulated Mosfet Power SupplyLed Power (green) And Protect (red) IndicatorsVariabl e Bass Boost (0 To +24 Db Bass Boost At 50 Hz)Soft Start Turn-onMono Channel OperationPreamp Output For Daisy Chaining Amplifiers3-way Protection Circuitry (thermal, Overload, And Speaker Short Protection)Heavy Duty Aluminum Alloy Heat-sinkNickel- plated Rca Level InputsNickel- plated Screw TerminalsInput Sensitivity: 250mv-6vPhase Shift 0-180°Variable Subsonic Filter (20-50 Hz, 24 Db/octave) Variable Low-pass Filter (50-250 Hz, 24 Db/octave) Frequency Response: 15-150 Hz4... Less