Category

Tools and Accessories
Showing results for "valve seat cutter"
Results 1 - 40 of 1500+

1751 Neway Valve Seat Cutter...

$19.85
eBay 1751 Neway Valve Seat Cutter Blade
Free Shipping
/1751-neway-valve-seat/K7An-kyWPoFppz3c_D5F0A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
1751 Neway Valve Seat Cutter Blade #251 Blades for model 102W. One blade per pack Fits our Neway Valve Seat Cutter Kits Listing # 271141538951
More

Makita 14 in. Power Cutter...

$899.00
CPO Makita Makita 14 in. Power Cutter with Diamond Blade EK7301X1
Free Shipping
/makita-14-in-power/O5q7sWJOG8I8-wsITrp8Ow==/info
CPO Makita
IN_STOCK ( In stock )
Store not rated
Free Shipping
14 in. Power Cutter with Diamond Blade - EK7301X1. Carburetor engineered with improved deco-valve and metering spring for precise fuel regulation at start up. Reinforced aluminum blade guard with 70 degrees range of limitless positioning using a marked knob handle. Cutting arm position simply changes from center position to flush outboard position allowing cuts directly adjacent to work. New Ignition coil with start-support function stores electrical energy with each pull for easier start ups. Water kit is assembled to saw and can be used with standard garden hose, gravity tank or pressure tank
More

Diamond Products Carbide...

$383.50
Ohio Power Tool Diamond Products Carbide Plate Cutter 3 07270
No Shipping Info
/diamond-products-carbide/1aS0yV9HVF5kA2jMgACUpg==/info
Ohio Power Tool
IN_STOCK ( In stock )
Diamond Products Carbide Plate Cutter Designed to cut through rebar or plate steel after a diamond core bit has drilled through the concrete Use with water for cooling Carbide inserts are brazed into the core barrel
More

Miltex 27-160 Diamond Pin &...

$583.78
Claflin Medical Equipment & Supplies Miltex 27-160 Diamond Pin & Wire Cutter, 6
Free Shipping
/miltex-27160-diamond-pin/4tfEojtyRsXRv2WXvbgNSQ==/info
Claflin Medical Equipment & Supplies
IN_STOCK ( In stock )
Store not rated
Free Shipping
DIAMOND Pin Wire Cutter, 6-1/2 (16.5 cm, cuts up to 2 mm 5/64) diameter hard wire, stainless
More

4-1/2 Wet Air Stone...

$295.00
Applied Diamond Tools 4-1/2 Wet Air Stone Cutter/Saw with Diamond Blade/Hose
No Shipping Info
/412-wet-air-stone/EBC1ZXpc183VCyFQw6YkjQ==/info
Applied Diamond Tools
IN_STOCK ( In stock )
Store not rated
Choose all other stone cutters
More

26-1/2 Replacement Blade for...

$299.00
WhitakerBrothers.com 26-1/2 Replacement Blade for Challenge Diamond Cutter
Free Shipping
/2612-replacement-blade/RFxRdPTjUCgP8jnL54voAQ==/info
WhitakerBrother s.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
26-1/2 Replacement Blade for Challenge Diamond Cutter; 18 lbs./8 kg; 26-1/2/67cm.
More

Cutter 14x1x20mm Laser Ser...

$138.00
eBay Cutter 14x1x20mm Laser Ser. Block/g.c./asphalt Blade
Free Shipping
/cutter-14x1x20mm-laser/UM62UtPV7gZnNVyod1PNRw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Cutter 14x1x20mm Laser Ser. Block/G.C./Asphalt Blade Description Cutter 14x1x20mm Laser Ser. Block/G.C./Asphalt Blade Up for grab is a NEW IN BOX 14 diamond blade for block/green concrete/asphalt cutting by Cutter Diamond Manufacturing. Item remains
More

NIAGARA CUTTER 71368 End...

$572.36
Zoro NIAGARA CUTTER 71368 End Mill, Roughing, TiN, 2 In, 8 FL, Sq End
Free Shipping
/niagara-cutter-71368-end/XsixYn_zRwISw9NK8Be5gw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 8, Single End, Square End Style, NonCenter Cutting Type, Right Hand Cut, Cobalt Steel, TiN Finish, Dia 2 In, Shank Dia 2 In, Length of Cut 6 In, Overall Length 9 3/4 In, Rhc 10 Deg, Rhh 30 Deg, For Profiling And Slotting In Most Materials
More

Makita 16 in. Segmented...

$118.99
Reconditioned Tools Makita 16 in. Segmented Diamond Power Cutter Blade A-94742
+ $6.99 shipping
/makita-16-in-segmented/hqFqrvygbHye4ICOvD25gA==/info
Reconditioned Tools
IN_STOCK ( In stock )
Store not rated
16 in. Segmented Diamond Power Cutter Blade - A-94742. Segmented rim slots help deliver a faster and cooler cut in multiple applications. Highest quality diamond grit. Laser welded to ensure the strongest joints possible. Slots between segments create significant cooling for longer blade life. Superior quality steel core. Optimum bond matrix provides a faster, smoother cut, and longer blade life. Intended for cured concrete, block, and brick applications
More

NIAGARA CUTTER 72248 End...

$142.85
Zoro NIAGARA CUTTER 72248 End Mill, Roughing, Co, 3/4, 4 FL, SGL Sq End
Free Shipping
/niagara-cutter-72248-end/1GipzGR0S6Hr6sR297TDTw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 4, Single End, Square End Style, NonCenter Cutting Type, Right Hand Cut, Cobalt Steel, Uncoated Finish, Dia 3/4 In, Shank Dia 3/4 In, Length of Cut 4 1/8 In, Overall Length 6 3/8 In, Rhc 10 Deg, Rhh 30 Deg, For Profiling And Slotting In Most Materials
More

NIAGARA CUTTER 71488 End...

$277.21
Zoro NIAGARA CUTTER 71488 End Mill, Roughing, Co, 1 1/2, 6 FL, Sq End
Free Shipping
/niagara-cutter-71488-end/3zDQ_8dEZSTf70of8dImOg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 6, Single End, Square End Style, NonCenter Cutting Type, Right Hand Cut, Cobalt Steel, Uncoated Finish, Dia 1 1/2 In, Shank Dia 1 1/4 In, Length of Cut 3 In, Overall Length 5 1/2 In, Rhc 10 Deg, Rhh 30 Deg, For Profiling And Slotting In Most Materials
More

NIAGARA CUTTER 72485 End...

$227.34
Zoro NIAGARA CUTTER 72485 End Mill, Roughing, Co, 1 1/2, 6 FL, Sq End
Free Shipping
/niagara-cutter-72485-end/5hWkcJMCinPsmwsLV6ouNQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 6, Single End, Square End Style, NonCenter Cutting Type, Right Hand Cut, Cobalt Steel, Uncoated Finish, Dia 1 1/2 In, Shank Dia 3/4 In, Length of Cut 2 In, Overall Length 4 1/4 In, Rhc 10 Deg, Rhh 30 Deg, For Profiling And Slotting In Most Materials
More

NIAGARA CUTTER 72327 End...

$225.23
Zoro NIAGARA CUTTER 72327 End Mill, Roughing, Co, 1 In, 5 FL, Sq End
Free Shipping
/niagara-cutter-72327-end/8hgUzVYWJV8MKfhcr4Iq5w==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 5, Single End, Square End Style, NonCenter Cutting Type, Right Hand Cut, Cobalt Steel, Uncoated Finish, Dia 1 In, Shank Dia 1 In, Length of Cut 6 In, Overall Length 8 1/2 In, Rhc 10 Deg, Rhh 30 Deg, For Profiling And Slotting In Most Materials
More

NIAGARA CUTTER 44599 End...

$442.34
Zoro NIAGARA CUTTER 44599 End Mill, Roughing, Co, 2 In, 8 FL, Sq End
Free Shipping
/niagara-cutter-44599-end/AKP2Q80iBfeRXFYHjf2ZNQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
End Mill, Roughing, Fine Pitch, General Purpose, Number of Flutes 8, Single End, Square End Style, NonCenter Cutting Type, Right Hand Cut, Cobalt Steel, Uncoated Finish, Dia 2 In, Shank Dia 2 In, Length of Cut 4 In, Overall Length 7 3/4 In, Rhc 10 Deg, Rhh 30 Deg, For Profiling And Slotting In Most Materials
More

NIAGARA CUTTER 44557 End...

$163.08
Zoro NIAGARA CUTTER 44557 End Mill, Roughing, Co, 1 1/4, 6 FL, Sq End
Free Shipping
/niagara-cutter-44557-end/HUYjX7BJ-g_M7QHH3wr_eg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
End Mill, Roughing, Fine Pitch, General Purpose, Number of Flutes 6, Single End, Square End Style, NonCenter Cutting Type, Right Hand Cut, Cobalt Steel, Uncoated Finish, Dia 1 1/4 In, Shank Dia 1 1/4 In, Length of Cut 2 In, Overall Length 4 1/2 In, Rhc 10 Deg, Rhh 30 Deg, For Profiling And Slotting In Most Materials
More

NIAGARA CUTTER 72245 End...

$100.30
Zoro NIAGARA CUTTER 72245 End Mill, Roughing, Co, 3/4, 4 FL, SGL Sq End
Free Shipping
/niagara-cutter-72245-end/KliaWa6ezRUcqEMmTLSjAg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 4, Single End, Square End Style, NonCenter Cutting Type, Right Hand Cut, Cobalt Steel, Uncoated Finish, Dia 3/4 In, Shank Dia 3/4 In, Length of Cut 2 1/2 In, Overall Length 4 3/4 In, Rhc 10 Deg, Rhh 30 Deg, For Profiling And Slotting In Most Materials
More

NIAGARA CUTTER 44559 End...

$212.95
Zoro NIAGARA CUTTER 44559 End Mill, Roughing, Co, 1 1/4, 6 FL, Sq End
Free Shipping
/niagara-cutter-44559-end/XPIdsXW01NDEvVlVPhSW-Q==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
End Mill, Roughing, Fine Pitch, General Purpose, Number of Flutes 6, Single End, Square End Style, NonCenter Cutting Type, Right Hand Cut, Cobalt Steel, Uncoated Finish, Dia 1 1/4 In, Shank Dia 1 1/4 In, Length of Cut 3 In, Overall Length 5 1/2 In, Rhc 10 Deg, Rhh 30 Deg, For Profiling And Slotting In Most Materials
More

NIAGARA CUTTER 72402 End...

$354.88
Zoro NIAGARA CUTTER 72402 End Mill, Roughing, TiN, 1 1/4, 6 FL, Sq End
Free Shipping
/niagara-cutter-72402-end/cIkNBs5CVn16vZpR-ulAhg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 6, Single End, Square End Style, NonCenter Cutting Type, Right Hand Cut, Cobalt Steel, TiN Finish, Dia 1 1/4 In, Shank Dia 1 1/4 In, Length of Cut 6 In, Overall Length 8 1/2 In, Rhc 10 Deg, Rhh 30 Deg, For Profiling And Slotting In Most Materials
More

NIAGARA CUTTER 72489 End...

$507.60
Zoro NIAGARA CUTTER 72489 End Mill, Roughing, Co, 1 1/2, 6 FL, Sq End
Free Shipping
/niagara-cutter-72489-end/gkBplMY3ROSkuJjWLrjOoQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 6, Single End, Square End Style, NonCenter Cutting Type, Right Hand Cut, Cobalt Steel, Uncoated Finish, Dia 1 1/2 In, Shank Dia 1 1/4 In, Length of Cut 8 In, Overall Length 10 1/2 In, Rhc 10 Deg, Rhh 30 Deg, For Profiling And Slotting In Most Materials
More

NIAGARA CUTTER 71406 End...

$175.36
Zoro NIAGARA CUTTER 71406 End Mill, Roughing, Co, 1 1/4, 6 FL, Sq End
Free Shipping
/niagara-cutter-71406-end/ij7t1gjTvUXu5R-mgPzwdg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 6, Single End, Square End Style, NonCenter Cutting Type, Right Hand Cut, Cobalt Steel, Uncoated Finish, Dia 1 1/4 In, Shank Dia 3/4 In, Length of Cut 2 In, Overall Length 4 1/4 In, Rhc 10 Deg, Rhh 30 Deg, For Profiling And Slotting In Most Materials
More

NIAGARA CUTTER 72400 End...

$250.17
Zoro NIAGARA CUTTER 72400 End Mill, Roughing, TiN, 1 1/4, 6 FL, Sq End
Free Shipping
/niagara-cutter-72400-end/mMQN_qlV51FyycNdib2yUQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 6, Single End, Square End Style, NonCenter Cutting Type, Right Hand Cut, Cobalt Steel, TiN Finish, Dia 1 1/4 In, Shank Dia 1 1/4 In, Length of Cut 4 In, Overall Length 6 1/2 In, Rhc 10 Deg, Rhh 30 Deg, For Profiling And Slotting In Most Materials
More

NIAGARA CUTTER 72322 End...

$236.02
Zoro NIAGARA CUTTER 72322 End Mill, Roughing, TiN, 1 In, 5 FL, Sq End
Free Shipping
/niagara-cutter-72322-end/tT6S9B5zR-XuYbgawGVXJA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 5, Single End, Square End Style, NonCenter Cutting Type, Right Hand Cut, Cobalt Steel, TiN Finish, Dia 1 In, Shank Dia 1 In, Length of Cut 6 In, Overall Length 8 1/2 In, Rhc 10 Deg, Rhh 30 Deg, For Profiling And Slotting In Most Materials
More

NIAGARA CUTTER 45441 End...

$142.85
Zoro NIAGARA CUTTER 45441 End Mill, Roughing, Co, 3/4, 4 FL, SGL Sq End
Free Shipping
/niagara-cutter-45441-end/tyoVScWt6j9WJ7iXcT_i_g==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
End Mill, Roughing, Fine Pitch, General Purpose, Number of Flutes 4, Single End, Square End Style, NonCenter Cutting Type, Right Hand Cut, Cobalt Steel, Uncoated Finish, Dia 3/4 In, Shank Dia 3/4 In, Length of Cut 4 1/8 In, Overall Length 6 3/8 In, Rhc 10 Deg, Rhh 30 Deg, For Profiling And Slotting In Most Materials
More

Deluxe Brass Oil Cutter With...

$93.70
Sears Marketplace Deluxe Brass Oil Cutter With 135 Degree Wheel
No Shipping Info
/deluxe-brass-oil-cutter/NAwIV-c164lg0gaaZjQiUw==/info
Sears Marketplace
IN_STOCK ( In stock )
A New Experience in Glass Cutting Perfectly Balanced Brass Handle 360 Degree Swivel Wheel Holders Precision Ball Bearing Swivel Head Mount Positive Oil Flow Check ValveInterchangea ble Carbide Wheel Holders The CRL Deluxe Brass Oil Cutter With 135 Degree Wheel is designed with professional features that will appeal to any glazier who spends 8 hours per day on a cutting table, or to the occasional craftsman cutting a few sheets per week. The balanced solid brass handle and contoured finger grip provide just the right amount of scoring pressure every time. The reservoir filling cap controls oil flow. Tightening the cap seats a valve against the cutter head, cutting off the oil flow. Loosening the cap opens the valve, allowing oil to flow to the cutting wheel.TP2800 Cutting Heads are mounted... Less
More

Diamond Products Carbide...

$674.50
Ohio Power Tool Diamond Products Carbide Plate Cutter 5 43399
No Shipping Info
/diamond-products-carbide/4msMydbEQHGJd2nTMQVlBw==/info
Ohio Power Tool
IN_STOCK ( In stock )
Diamond Products Carbide Plate Cutter Designed to cut through rebar or plate steel after a diamond core bit has drilled through the concrete Use with water for cooling Carbide inserts are brazed into the core barrel
More

Makita 14 in. Angle Cutter...

$649.99
CPO Makita Makita 14 in. Angle Cutter with FREE Diamond Blade 4114X
Free Shipping
/makita-14-in-angle/LSW5ov0-ZDKHRqtVlYXT8w==/info
CPO Makita
IN_STOCK ( In stock )
Store not rated
Free Shipping
14 in. Angle Cutter - 4114X. Socket Wrench - 782210-8. 14 in. Diamond Blade. Operating Manual. Built-in vacuum attachment port for efficient removal of dust and debris. Rubber shield helps keep debris away from operator and from entering the motor. Tool base adjusts allowing up to 5 in. cutting depth; best for cutting split face block when building retaining walls. Guide wheels on the tool guard ensure smooth traveling of tool over surface material when base is removed for cutting closer to walls. Positioning of the tool body can be adjusted (0 degrees - 80 degrees) for operator comfort; operates independently of cutting depth for convenience and efficiency. Base has front and rear cutting guides for increased accuracy. Ball bearing construction and externally accessible brushes for... Less
More

Benchmade Safety Cutter...

$44.50
Grainger Benchmade Safety Cutter (6-1/2 Inch L) black, 1/2 Blade. Model: 8 BLKW MED
+ $9.63 shipping
/benchmade-safety-cutter/2FF72okbufA3PODOB9wD2g==/info
Grainger
IN_STOCK ( In stock )
Safety Cutter, Application Cutting Webbing, Seat Belts, Belts, Clothing, Overall Length 6-1/2 In., Overall Thickness 1/8 In., Handle Color Black, Handle Type Full-tanged, Handle Material 440c Stainless Steel, Blade Length 1/2 In., Blade Type Hook, Blade Material Stainless Steel, Features Black Powder Coat Finish, Oxygen Valve Wrench, Syringe Popper, Compact, Light-weight Design, Durable Edge Quality, Fixed Locking Mechanism, Longer Handle, Medical, Number Of Blades 1, Includes Soft Nylon Sheath
More

Cutter 14x1x20mm Prem. Ser...

$138.00
eBay Cutter 14x1x20mm Prem. Ser. Concrete/masonry Blade
Free Shipping
/cutter-14x1x20mm-prem/cqCvcQ4V_OiHWiew51kh0g==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Cutter 14x1x20mm Prem. Ser. Concrete/Masonry Blade Description Cutter 14x1x20mm Premium Series Blade Up for grab is a NEW IN BOX 14 diamond blade for concrete/masonry cutting by Cutter Diamond Manufacturing. Item remains in 100%working condition. Further details provided below. Thanks for looking! Technical Details From Cutter Diamond Manufacturing Premium Series Max RPM:5460 Diameter: 14 Arbor: 1 x 20mm Application: Concrete/Masonry (dry or wet cutting) HP5 CALIFORNIA RESIDENTS PAY A LOC
More

NIAGARA CUTTER 71285 End...

$137.52
Zoro NIAGARA CUTTER 71285 End Mill, Roughing, Co, 7/8, 5 FL, SGL Sq End
Free Shipping
/niagara-cutter-71285-end/4fCfYZyjME5VonwCaotyqw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 5, Single End, Square End Style, NonCenter Cutting Type, Right Hand Cut, Cobalt Steel, Uncoated Finish, Dia 7/8 In, Shank Dia 7/8 In, Length of Cut 3 1/2 In, Overall Length 5 3/4 In, Rhc 10 Deg, Rhh 30 Deg, For Profiling And Slotting In Most Materials
More

Diamond Cutter

$8.95
Valley Vet Supply Diamond Cutter
Free Shipping
/diamond-cutter/24P7ylvGFdSSkH_pZsmWAw==/info
Valley Vet Supply
IN_STOCK ( In stock )
Free Shipping
4-point, 3 cutter. Standard cutter for the Showmaster shearing unit.
More

NIAGARA CUTTER 88410 End...

$172.75
Zoro NIAGARA CUTTER 88410 End Mill, Roughing, Co, TiCN, 1 In, 5 FL, Sq
Free Shipping
/niagara-cutter-88410-end/6udefzrkM6Axdh1_2cyy7A==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
End Mill, Roughing, Fine Pitch, General Purpose, Number of Flutes 5, Single End, Square End Style, NonCenter Cutting Type, Right Hand Cut, Cobalt Steel, TiCN Finish, Dia 1 In, Shank Dia 1 In, Length of Cut 3 In, Overall Length 5 1/2 In, Rhc 10 Deg, Rhh 30 Deg, For Profiling And Slotting In Most Materials
More

Diamond Products Carbide...

$280.00
Ohio Power Tool Diamond Products Carbide Plate Cutter 1-7/8 55705
No Shipping Info
/diamond-products-carbide/72ENBXPPKhP49m-YsOT6Gw==/info
Ohio Power Tool
IN_STOCK ( In stock )
Diamond Products Carbide Plate Cutter Designed to cut through rebar or plate steel after a diamond core bit has drilled through the concrete Use with water for cooling Carbide inserts are brazed into the core barrel
More

Niagara Cutter 72320 End...

$119.75
eBay Niagara Cutter 72320 End Mill, Roughing, Tin, 1 In, 5 Fl, Sq End
Free Shipping
/niagara-cutter-72320-end/-5AugTbbLGApcjh0lxlliA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
About Zoro Shipping Returns Terms Payment FAQs Contact Store Categories All categories Click here to view full size. Full Size Image Click to close full size. For warranty information see our terms . NIAGARA CUTTER 72320 End Mill, Roughing, TiN, 1 In, 5 FL, Sq End NIAGARA CUTTER Item Specifics Item Cobalt End Mill Type Roughing, Coarse Pitch Material Cobalt Application For Mild Steels, Soft to Medium-Hard Steels, Stainless Steels and Non-Ferrous Metals Cut Right Hand Dia. (In.)1 Finish TiN Item
More

Niagara Cutter 44547 End...

$139.41
eBay Niagara Cutter 44547 End Mill, Roughing, Co, 1 In, 5 Fl, Sq End
Free Shipping
/niagara-cutter-44547-end/9eQspkMqbKVuq01TKpEe4w==/info
eBay
IN_STOCK ( In stock )
Free Shipping
About Zoro Shipping Returns Terms Payment FAQs Contact Store Categories All categories Click here to view full size. Full Size Image Click to close full size. For warranty information see our terms . NIAGARA CUTTER 44547 End Mill, Roughing, Co, 1 In, 5 FL, Sq End NIAGARA CUTTER Item Specifics Item Cobalt End Mill Type Roughing, Fine Pitch Material Cobalt Application For Profiling And Slotting In Most Materials Cut Right Hand Dia. (In.)1 Finish Uncoated Item Cobalt End Mill Length of Cut (In.)4
More

Niagara Cutter 71366 End...

$153.39
eBay Niagara Cutter 71366 End Mill, Roughing, Co, 1 1/8, 6 Fl, Sq End
Free Shipping
/niagara-cutter-71366-end/HOuDH2l1m5jTNCENzpz-oA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
About Zoro Shipping Returns Terms Payment FAQs Contact Store Categories All categories Click here to view full size. Full Size Image Click to close full size. For warranty information see our terms . NIAGARA CUTTER 71366 End Mill, Roughing, Co, 1 1/8, 6 FL, Sq End NIAGARA CUTTER Item Specifics Item Cobalt End Mill Type Roughing, Coarse Pitch Material Cobalt Application For Mild Steels, Soft to Medium-Hard Steels, Stainless Steels and Non-Ferrous Metals Cut Right Hand Dia. (In.)1-1/8 Finish Unco
More

Niagara Cutter 71407 End...

$111.61
eBay Niagara Cutter 71407 End Mill, Roughing, Co, 1 1/4, 6 Fl, Sq End
Free Shipping
/niagara-cutter-71407-end/Tya-f0YSLsK8LAjmkt2qXg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
About Zoro Shipping Returns Terms Payment FAQs Contact Store Categories All categories Click here to view full size. Full Size Image Click to close full size. For warranty information see our terms . NIAGARA CUTTER 71407 End Mill, Roughing, Co, 1 1/4, 6 FL, Sq End NIAGARA CUTTER Item Specifics Item Cobalt End Mill Type Roughing, Coarse Pitch Material Cobalt Application For Mild Steels, Soft to Medium-Hard Steels, Stainless Steels and Non-Ferrous Metals Cut Right Hand Dia. (In.)1-1/4 Finish Unco
More

Niagara Cutter 44569 End...

$149.41
eBay Niagara Cutter 44569 End Mill, Roughing, Co, 1 1/2, 6 Fl, Sq End
Free Shipping
/niagara-cutter-44569-end/VHquENvqtdv0eqzsmjXyXw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
About Zoro Shipping Returns Terms Payment FAQs Contact Store Categories All categories Click here to view full size. Full Size Image Click to close full size. For warranty information see our terms . NIAGARA CUTTER 44569 End Mill, Roughing, Co, 1 1/2, 6 FL, Sq End NIAGARA CUTTER Item Specifics Item Cobalt End Mill Type Roughing, Fine Pitch Material Cobalt Application For Profiling And Slotting In Most Materials Cut Right Hand Dia. (In.)1-1/2 Finish Uncoated Item Cobalt End Mill Length of Cut (I
More

Niagara Cutter 71326 End...

$109.07
eBay Niagara Cutter 71326 End Mill, Roughing, Co, 1 In, 5 Fl, Sq End
Free Shipping
/niagara-cutter-71326-end/uWH8QV-OMIaDKOgDHNi6FA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
About Zoro Shipping Returns Terms Payment FAQs Contact Store Categories All categories Click here to view full size. Full Size Image Click to close full size. For warranty information see our terms . NIAGARA CUTTER 71326 End Mill, Roughing, Co, 1 In, 5 FL, Sq End NIAGARA CUTTER Item Specifics Item Cobalt End Mill Type Roughing, Coarse Pitch Material Cobalt Application For Mild Steels, Soft to Medium-Hard Steels, Stainless Steels and Non-Ferrous Metals Cut Right Hand Dia. (In.)1 Finish Uncoated
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Most Popular In Tools and Accessories

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-25816
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-25816