Unimat Lathe Home and Garden - Shopping.com

Category

Tools and Accessories
Showing results for "unimat lathe"
Results 1 - 40 of 433

Tilting Angle Table For...

$85.00
eBay Tilting Angle Table For Unimat Lathe Db200 /sl1000
+ $10.00 shipping
/tilting-angle-table-for/ZDrmVOkEgjWM_it_b7nxIg==/info
eBay
IN_STOCK ( In stock )
Tired of tilting your head stock to cut an angle on your Unimat? Use the Tilting Angle Table. This angle table will greatly reduce your setup time. Part mounted on the table can be machined or drilled at precise angles. Table can be set at any angle from 0 to 90 degree. Additional Rotating Base can be added to the Tilting Table to cut compound angle. Side Plates are made from CRS 1018; bottom/top plate are made from 6061 Aluminum. Bottom Plate size is 4.625 X 3.125. Proudly made in the USA. S
More

Unimat Lathe Miniature...

$7.45
eBay Unimat Lathe Miniature Machining For Model Railroaders Pdf Manual Machinex 5
Free Shipping
/unimat-lathe-miniature/U67NzHIGHT03OUSYT3WdyQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
NOTE: This is a Computer File not a printed manual.This item is an Adobe PDF Document of scanned pages from an original Edelstaal Machinex 5 Manual. Adobe Reader is required to view this Manual. GET ADOBE READER The Manual is over 30 pages of information on the Machinex 5 and attachments. This manual has specific information for the Model Railroader and has Machining Techniques that apply to all Unimat Lathe models.There is an interactive Table of Contents that will take you to each page with a
More

Build Your Own Plans-quick...

$12.99
eBay Build Your Own Plans-quick Change Tool Post Fits Unimat, Lathe, Atlas, Sherline
+ $2.45 shipping
/build-your-own/FQau7aCX46tDbkrR56KHpg==/info
eBay
IN_STOCK ( In stock )
BUILD YOUR OWN PLANS--QUICK CHANGE TOOL POST fits Unimat, Lathe, Taig, Sherline and all small lathes up to 7 X 16 Minilathe 1-3/8 square quick change tool post Customizable to fit any lathe .472 (12MM) minimum vertical center distance required from the centerline of lathe headstock to top of compound cross slide) 1/2 X 7/8 X 1-3/8quick change tool holders hold 1/4 tool bits (tool slot size is 5/16) Robust construction, repeatable, rigid, smooth and positive operation Saves set up time on
More

8 Thread Masters & Followers...

$199.99
eBay 8 Thread Masters & Followers Unimat Lathe Sl1000 / Db200 13,14,16,18,20,2 4,28,32
Free Shipping
/8-thread-masters/OxBFoojWIxzpHDh293w_Eg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
8 master thread patterns and followers. 13, 14, 16, 18, 20, 24, 28, 32.Great shape. If you would like a custom size please contact me and I can make it for you Please feel free to call me with any questions at:Phone: 505-880-1540 Thanks John
More

A2z Qctp Toolpost For Unimat...

$99.95
eBay A2z Qctp Toolpost For Unimat Lathes -usa Made Ships Free In Usa
Free Shipping
/a2z-qctp-toolpost-for/S7AE0-U6I7I-mIv5dLmbGw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
A2Z CNC brand Quick Change Toolpost QCTP for Unimat lathes.This model fits Unimat 3, 4, SL and DB lathes. The Best Value In a Deluxe USA Made QCTP Special: Free Domestic USPS Priority shipping! $14.00 international USPS First Class Shipping!www.A2ZCo rp.us This QCTP received a great review in Home Shop Machinist magazine. Made in the USA and sold direct by the manufacturer. Improved design of a classic lathe accessory. Watch out for unproven designs with less functionality. Absolute top notch qu
More

Emco Unimat 3 Mill Metal...

$25.00
eBay Emco Unimat 3 Mill Metal Lathe Parts Manual 0302
Free Shipping
/emco-unimat-3-mill-metal/E2cS3gPtHQofzShEjQZLiQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Untitled Document Free, Fast Shipping Every Business Day! See All Categories How-to Books Lathe Practices Series Lathe Operations Milling Operations Grinding Operations Metalworking Woodworking Brands JET Tools/Asian EMCO Unimat 3 Mill Lathe Service Parts Manual Click for Our Complete Catalog Manual Description: Number of Pages: 32 This is a reproduction, not a photocopy, of a Emco Unimat 3 Mill Lathe Parts Manual only.This manual covers every part of the lathe. This contains all the accessorie
More

Emco Unimat 3 Mill Metal...

$30.00
eBay Emco Unimat 3 Mill Metal Lathe Instruction Manual 0301
Free Shipping
/emco-unimat-3-mill-metal/XMERvT0873gV0illDfieqA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Untitled Document Free, Fast Shipping Every Business Day! See All Categories How-to Books Lathe Practices Series Lathe Operations Milling Operations Grinding Operations Metalworking Woodworking Brands JET Tools/Asian EMCO Unimat 3 Instruction Book Click for Our Complete Catalog Manual Description: Number of Pages: 55 This is a reproduction, not a photocopy, of an original Emco Unimat 3 Instruction Book Manual . Contents: Technical Data............. ................. ................. ...........
More

Unimat Sl1000 Db200...

$20.00
eBay Unimat Sl1000 Db200 Watchmakers Lathe E16 Collet 4.5 Mm
+ $4.35 shipping
/unimat-sl1000-db200/cY48slGbHqGLhV-iVJ4gKw==/info
eBay
IN_STOCK ( In stock )
Unimat SL1000 DB200 Watchmakers Lathe E16 Collet 4.5 mm NOS New, unused Mecanix Made in Japan , or Swiss made Schaublin
More

Unimat Sl1000 Db200...

$20.00
eBay Unimat Sl1000 Db200 Watchmakers Lathe E16 Collet 1.0 Mm
+ $4.35 shipping
/unimat-sl1000-db200/j7WAQUGlbpfqznHityQ-Yw==/info
eBay
IN_STOCK ( In stock )
Unimat SL1000 DB200 Watchmakers Lathe E16 Collet 1.0 mm NOS New, unused Mecanix Made in Japan , or Swiss made Schaublin
More

Unimat 4 Way Tool Post 1 3/4...

$49.99
eBay Unimat 4 Way Tool Post 1 3/4 X 1 3/4 For Sl 1000 Or Db 200 Cnc
Free Shipping
/unimat-4-way-tool-post-1/6FpSOML0RUx2xltoYxxI0Q==/info
eBay
IN_STOCK ( In stock )
Free Shipping
LATHE 4 WAY TOOL POST 1 3/4 x 1 3/4 for Unimat SL 1000 or DB 200 All steel Includes T nut Please feel free to call me with any questions at:Phone: 505-880-1540 Thanks John
More

Build Plans-otc-125 Tailstock...

$12.99
eBay Build Plans-otc-125 Tailstock Center Offsetable Fits Unimat, 7 X 12 Mini Lathe
+ $2.45 shipping
/build-plansotc125/65vhF1zTSALBhNnp50YtYw==/info
eBay
IN_STOCK ( In stock )
BUILD YOUR OWN PLANS--1-1/4OFFSET TAILSTOCK CENTER fits ATLAS, SOUTH BEND, LOGAN LATHES,UNIMAT, All lathes up to 9 SWING 1/1/4 Diameter head.Up to 5/16 offset.Robust construction. Chose from 3 mounting styles customizable to fit any lathe tailstock. Repeatable Eliminates the need to offset the lathe tailstock when turning long tapers such as Morse tapers and then having to re-zero the tailstock again upon completion ( some small lathes do not have tailstocks that are able to be offset- so thi
More

Boring Head For The Unimat

$69.99
eBay Boring Head For The Unimat
Free Shipping
/boring-head-for-the-unimat/n-KIaNsBUCVhNLQbZ2bc9A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
1 boring head for the unimat 1 boring head takes 3/8 boring bars M12x1 thread The tool is made from all steel Includes 3/8 boring bar here is the link to watch the video http://youtu.be/V0 t0-Dct8D0 Boring holes on a mill is very similar to boring holes on a lathe except the cutting tool moves rather than the part. The main advantage of boring over drilling is that the hole will always come out in perfect alignment with the spindle whereas a drill may wander. Larger holes must be bored rathe
More

Emco Unimat Sl1000 Db200...

$179.00
eBay Emco Unimat Sl1000 Db200 Tracer Attachment Cnc Taper
Free Shipping
/emco-unimat-sl1000-db200/9rvT7lxcyilg9wvsgK58Nw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
EMCO Unimat SL1000 DB200 tracer attachment This is a mechanical tracer attachment for a unimat sl lathe it can be used most any lathe This tool has 3/4 of travel. The tool is made from all steel All you do is saw out the profile that you want. Sand it until it's smooth.The template is a mirror image of what you make on the Lathe.To watch a video at http://youtu. be/aX0CZ1jETKM You can also google unimat tracer attachment Please feel free to call me with any questions at:Phone: 505-880-1540 Tha
More

Emco Unimat Sl1000 Radius...

$49.99
eBay Emco Unimat Sl1000 Radius Turning Attachment
Free Shipping
/emco-unimat-sl1000-radius/mB7FYW92Uz5btDtIf49Tnw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
EMCO Unimat SL1000 DB200 Radius turning attachment This is a radius turning tool is for a unimat sl lathe it can be held in a quick change tool holder of most any lathe This attachment can create ball or Concave radius up to .5 radius or 1 ball. The attachment is made from all steel To watch a video at http://youtu. be/00kMKyHHudE Please feel free to call me with any questions at:Phone: 505-880-1540 Thanks John
More

Boring Head For The Unimat...

$69.99
eBay Boring Head For The Unimat Sl1000/db200
Free Shipping
/boring-head-for-the/X6CdIcszviU9qukwGyOVRA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
1 boring head for the unimat 1 boring head takes 3/8 boring bars M12x1 thread The tool is made from all steel Includes 3/8 boring bar here is the link to watch the video http://youtu.be/V0 t0-Dct8D0 Boring holes on a mill is very similar to boring holes on a lathe except the cutting tool moves rather than the part. The main advantage of boring over drilling is that the hole will always come out in perfect alignment with the spindle whereas a drill may wander. Larger holes must be bored rathe
More

PTG Lathe Centering Bar 1 x 8

$94.99
MidwayUSA PTG Lathe Centering Bar 1 x 8
+ $7.59 shipping
/ptg-lathe-centering-bar-1/wfV7wlVee5MmUqELWLQUpw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This steel centering bar allows the alignment of a lathe to be checked. Technical InformationNotes: Allows checking alignment of lathe. Recesses on each end align headstock and tailstock centers. Aids in offsetting tailstock for taper cutting. Steel.
More

Unimat Tommy Bars (key) For 3...

$5.95
eBay Unimat Tommy Bars (key) For 3 Jaw Chuck
+ $3.00 shipping
/unimat-tommy-bars-key/6y7a1gGWO12AAprhfebfDQ==/info
eBay
IN_STOCK ( In stock )
Unimat Tommy Bars (key) for 3 jaw chuck.Tommy Bars are new condition.Tip Diameter 4mm.The sale is a pair ( 2 pieces ).* Please judge in picture for detail condition. The sale as complete shown in picture.Email question if you may have any. Thank you Good Luck *Check out my other items !
More

PTG Barrel Threading Lathe...

$35.99
MidwayUSA PTG Barrel Threading Lathe Bit Square 3/8
+ $4.99 shipping
/ptg-barrel-threading/-jxeTrUz_k3YwbqfwDf87g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The square bit cuts a true 10 threads per inch square thread for 03 Springfields and Enfields. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks.
More

T-nuts For Unimat Db200/...

$15.00
eBay T-nuts For Unimat Db200/ Sl1000 Milling Table
+ $3.00 shipping
/tnuts-for-unimat-db200/_l6NkMohijDKS_0lIPFaLg==/info
eBay
IN_STOCK ( In stock )
T- Nuts for Unimat Milling Table Quantity: 6 pcs. Made from 1010 Steel with M6-1 Thread. T- Nut has a larger foot print compared to the original. Made in the USA. Shipping cost within US is $3.00
More

Build Plans-otc-250 Tailstock...

$12.99
eBay Build Plans-otc-250 Tailstock Center Offset Fits Atlas,south Bend,logan, Lathe
+ $2.45 shipping
/build-plansotc250/_cRo2HvXKy0cUYSM31c4Tg==/info
eBay
IN_STOCK ( In stock )
BUILD YOUR OWN PLANS--2-1/2OFFSET TAILSTOCK CENTER fits ATLAS, SOUTH BEND, LOGAN LATHES,UNIMAT, All lathes up to 12 SWING 2/1/2 Diameter head.Up to 5/8 offset.Robust construction. Chose from 2 mounting styles customizable to fit any lathe tailstock. Repeatable Eliminates the need to offset the lathe tailstock when turning long tapers such as Morse tapers and then having to re-zero the tailstock again upon completion ( some small lathes do not have tailstocks that are able to be offset- so thi
More

Build Your Own Plans-2 Turret...

$12.99
eBay Build Your Own Plans-2 Turret Tool Post Fits Atlas,south Bend,7 X 16 Mini Lathe
+ $2.45 shipping
/build-your-own-plans2/l8niozG72-Iv0dZKIeKoow==/info
eBay
IN_STOCK ( In stock )
BUILD YOUR OWN PLANS--2 TURRET TOOL POST fits 7 X 12 MINI LATHE, ATLAS, SOUTH BEND, LOGAN LATHES,UNIMAT, All lathes up to 9 SWING 2 square turret block holds (4) 1/4 tools (tool slot size is 5/16)24 position positive indexing with detents every 15 degrees Robust construction Customizable to fit any lathe (.472) minimum vertical distance required from the centerline of spindle to the top of cross slide or compound) Repeatable Rigid Smooth and positive operation. The turret block is raised u
More

PTG Barrel Threading Lathe...

$42.99
MidwayUSA PTG Barrel Threading Lathe Bit 55-Degree 1/2
+ $4.99 shipping
/ptg-barrel-threading/65KXlmjdDSFWNlXJ3t4s_A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The 55 Degree cutters are designed to cut the true threads of the 98 Mauser. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks.
More

PTG Barrel Threading Lathe...

$42.99
MidwayUSA PTG Barrel Threading Lathe Bit 60-Degree 1/2
+ $4.99 shipping
/ptg-barrel-threading/DUnMWiZv0-0xWBzE4Ysu5A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The 60 Degree cutters duplicate most after market Mauser thread patterns. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks.
More

Lathe Pulley Bushing - L3-109

$20.48
Sears Parts Direct Lathe Pulley Bushing - L3-109
+ $8.99 shipping
/lathe-pulley-bushing/1XweZG0t9uKngJHS5GW6mg==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Choose this manufacturer- approved bushing for your lathe.Use this bushing to replace a bushing that allows your lathe to spin.The bushing works with your lathe's variable speed pulley and main pulley spindle. Plan to replace your lathe's spindle when repl
More

SHOP FOX Bench Lathe - 9 Inch...

$1,479.99
Northern Tool SHOP FOX Bench Lathe - 9 Inch x 19 Inch, Model M1049
Free Shipping
/shop-fox-bench-lathe-9/-Kl6_b-5GhIVatler5R7ag==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The SHOP FOX Bench Lathe has all the features and precision of the larger lathes, but at a fraction of the cost. Check out all the features and you'll agree it's got everything you need 4in. 3-jaw chuck with two sets of jaws, 7 1/4in. 4-jaw chuck with reversible jaws, steady rest, follow rest, MT #2 and MT #3 dead center, MT #2 live center, 4-way tool post, extra C-type tool post and more Includes toolbox and tool kit. Cannot ship to AK, CA, HI, MA, MD and RI. Carriage Travel in. 16, Spindle Speeds qty. 6, Stand Included No, Volts 110 single phase, Thread Cutting in. 8-56 TPI, Thread Cutting mm 0.05-3.0, HP 3/4, Width Between Centers in. 19, Speed RPM 1,725, Dimensions L x W x H in. 22 x 36 1/2 x 15. Swing over bed 9in. Swing over cross slide 5in. Distance between centers 19in. Spindle... Less
More

Shop Fox Wood Lathe with...

$799.99
Northern Tool Shop Fox Wood Lathe with Stand - 16 Inch x 43 Inch, 2 HP, Model W1758
+ $326.35 shipping
/shop-fox-wood-lathe-with/Ls7DoF5BWls7zhBGN6B6Aw==/info
Northern Tool
IN_STOCK ( In stock )
The Shop Fox 16in. x 43in. Wood Lathe with Stand is a fully featured and powerful lathe at a competitive price. It features a hefty 2 HP motor, 10 speeds, a swivel head for easy outboard bowl turning, a digital tach for exact spindle speeds, plus precision ground cast iron bed, headstock and tailstock quick locks and heavy cast iron legs for stability. Cannot ship to AK, CA, HI, MA, MD and RI. Speed Range RPM 600-2400, Amps 14, Dimensions L x W x H in. 76 1/2 x 19 x 48 3/4, Distance Between Centers in. 46, HP 2, Speeds qty. 10, Spindle Thread Size 1 x 8, Swing in. 16, Volts 110. 2 HP, 14 Amp, 110V single-phase motor Swing over bed 16in. 1in. x 8 TPI RH headstock spindle MT#2 spindle and tailstock tapers 3/8in. spindle bore 10 speeds 600-2400 RPM 0, 60, 90, 120 and 180 headstock rotation... Less
More

JET ZX Lathe - 14 x 60, Model...

$18,000.00
Northern Tool JET ZX Lathe - 14 x 60, Model GH-1460ZX
Free Shipping
/jet-zx-lathe-14-x-60/_fWzMwu8haPevXEmj8k3aQ==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The 14in. ZX Series large spindle bore lathe is designed exclusively by with a 3 1/8in. bore spindle supported by two tapered and one ball bearing. Chrome molybdenum headstock gears are hardened, ground and shaved. Universal gearbox allows inch, metric, diametric and module pitch threads, no change gears required. Carriage features one-shot lubrication and Turcite B on bed sliding surfaces. Thread Cutting mm 0.05-20, Stand Included Yes, Thread Cutting in. 1 5/8-72, Dimensions L x W x H in. 117 x 40 x 48, HP 7.5, Width Between Centers in. 60, Spindle Speeds qty. 12, Carriage Travel in. 55, Speed RPM 42-1,800, Volts 230/460V prewired 230V. T-slotted compound slide featuring a four-way tool post One-piece cast iron base absorbs vibration allowing heavier cuts High-quality ANSI Class 50... Less
More

Lathe Back Gear - 10-241X

$269.73
Sears Parts Direct Lathe Back Gear - 10-241X
Free Shipping
/lathe-back-gear-10241x/5ZNpuw2S57LNBjzA2rnF2Q==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Free Shipping
This manufacturer- approved back gear (part number 10-241X) is for lathes.Back gear 10-241X allows the lathe to turn at a slower speed.Wear work gloves to protect your hands when installing this part.
More

Nicholson 10 Fine Cut Long...

$16.29
MidwayUSA Nicholson 10 Fine Cut Long Angle Lathe File
+ $4.99 shipping
/nicholson-10-fine-cut/IQk0bTBJRtFjxMyvLkfATg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Designed to cut faster than regular mill files for lathe filing, these rectangular- shaped, single-cut, safe-edge files are just the ticket for filing the turning marks off of a barrel for that smoother-than-glas s finish. Technical InformationFeatur es: Rapid free cutting file designed for lathe filing Cut faster than regular mill files and leave a smoother finish Safe edges Notes: Approximately 0.185 thick, 0.935 wide File length is measured exclusive of tang, from point to heel American pattern files are available in 3 grades of cut: bastard-cut, second-cut and smooth-cut Swiss pattern files are offered in seven cuts: No. 00, 0, 1, 2, 3, 4 and 6 with #00 being the coarse, #6 the fine cut
More

Lathe Bearing - 10F-16

$135.09
Sears Parts Direct Lathe Bearing - 10F-16
Free Shipping
/lathe-bearing-10f16/DcVa8xfu4iNycdJh5T3EYQ==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Free Shipping
Pricing Subject to Change. Lathe Bearing
More

12-24V Lathe Press Motor with...

$11.25
Banggood 12-24V Lathe Press Motor with Drill Chuck and Mounting Bracket-Motor
Free Shipping
/1224v-lathe-press-motor/9-x1SzRVenoNofbk2adXjA==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: 12-24V Lathe Press Motor with Drill Chuck and Mounting Bracket Video Show How to make a mini DIY LAWN MOWER Specification: Power Supply DC 12 5A -24V 3A No load speed 8000 r/min ~28000 r/min 555 Ball Bearing Motor size approx 36.5mm*75mm Round Shaft 3.175mm(1/8) JT0 drill chuck approx 21mm*37mm With JT0 precision drill chuck clamping range 0.3 - 4mm Features: With JT0 precision drill chuck clamping range is 0.3 - 4mm. For milling machine, lathe, drilling machine, wood working machine. The shank with screw can be tight and flex for you. Package Included: 1 x Motor 1 x JT0 drill chuck 1 x Mount for the motor 1 x Drill bits 1 x chuck key 1 x connecting link 1 x screw More Details:
More

Lathe Gear - 3980-12

$92.99
Sears Parts Direct Lathe Gear - 3980-12
Free Shipping
/lathe-gear-398012/XRRcVCUsaalzi0WgMOu_bQ==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Free Shipping
This manufacturer- approved gear (part number 3980-12) is for lathes.Gear 3980-12 meshes with other gears inside the lathe to turn the lathe shaft and spindle.Wear work gloves to protect your hands when installing this part.
More

NOVA OR3000 29 in. Outrigger...

$279.99
CPO Outlets NOVA OR3000 29 in. Outrigger Accessory for NOVA Lathes
Free Shipping
/nova-or3000-29-in/dwRLeLKO8OX_BUlOHgpBWQ==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
29 in. Outrigger Accessory for NOVA Lathes - OR3000. Mounting Screws. Built from heavy-duty cast iron and designed to provide rock steady chisel support for turning work up to 29 in. in diameter. Arm system articulates out to give adequate clearance from the spindle for work with thicknesses up to 8.5 in.. Toolrest post can be locked along the length of the arm to allow for all shapes and sizes of woodturning. Very quick and easy to swing into operation, giving you extra capacity within seconds. Can be easily bolted at the end of the headstock bed casting and requires no more room allowance than the normal lathe since it is designed to be used with the swivel headstock in front of a lathe. Compatible with the NOVA DVR XP, 16244, and 3000 lathes
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp17.xss-30388
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp17.xss-30388