Category

Tools and Accessories
Showing results for "unimat lathe"
Results 1 - 40 of 425

Unimat Lathe Buddy Bar -...

$12.99
eBay Unimat Lathe Buddy Bar - Unimat Sl Db - Align Your Lathe - From Lathecity
+ $3.00 shipping
/unimat-lathe-buddy-bar/vgiWCkbTQeflWmYboh3hPA==/info
eBay
IN_STOCK ( In stock )
UNIMAT Lathe Accessory Align you lathe perfectly to machine pieces with small run-out Buddy Bar Size: Double pin end (tool steel) that fits perfectly in the UNIMAT SL DB lathe spindle and tailstock spindle. Purpose of that tool: If one wants to machine pieces with a small run-out (high centricity), the work piece must be perfectly center drilled. That doesn’t work too easily on an UNIMAT SL DB since the headstock is rotatable and it is only aligned with a pin. Even if that pin is used, one ca
More

Unimat Lathe M12 - 1/2-20...

$33.33
eBay Unimat Lathe M12 - 1/2-20 Jacobs Drill Chuck Adapter In Steel -- From Lathecity
+ $4.00 shipping
/unimat-lathe-m12-1220/sK3WvE91Hx9OLfmWDxvimQ==/info
eBay
IN_STOCK ( In stock )
UNIMAT SL DB Lathe Accessory Connects a standard Jacobs drill chuck to UNIMAT tailstock M12-1.0 mm bushings to 1/2”-20 pin end, steel, hex Size: Metric M12-1.0 mm bushings (threaded hole) to English 1/2”-20 bolt end Purpose of that tool: Connects standard Jacobs drill chuck to UNIMAT tailstock. The accessory is tested on an UNIMAT SL DB 200 Materials: Steel, hex bar - the hex shape allows for easy mounting on the lathe spindle Options: M12 = M14 = same price, but need to be made. All LatheC
More

Rotating Mill Vise Base For...

$70.00
eBay Rotating Mill Vise Base For Unimat Lathe Db200 /sl1000
+ $5.00 shipping
/rotating-mill-vise-base/SC3YOMkv8l_jRfvxplw1Uw==/info
eBay
IN_STOCK ( In stock )
Rotating Mill Vise Base for UNIMAT SL1000 or DB200. This base will allow your UNIMAT vise to be rotated to any angle. The black anodized base is engraved with angle measurements in 5° increments all the way around. A witness mark is engraved on the side of the rotating base that holds the vise. A locking plate underneath pulls the rotating base down onto the base to lock it securely when the two hold-down screws are tightened. The rotating vise base eliminates clamping and unclamping the vise
More

Unimat Lathe M12 - 3/8-24...

$29.99
eBay Unimat Lathe M12 - 3/8-24 Jacobs Drill Chuck Adapter In Steel -- From Lathecity
+ $4.00 shipping
/unimat-lathe-m12-3824/xOgB5SODt__qyztQYM2X-A==/info
eBay
IN_STOCK ( In stock )
UNIMAT SL DB Lathe Accessory Connects a standard Jacobs drill chuck to UNIMAT tailstock M12-1.0 mm bushings to 3/8”-24 pin end, steel, hex Size: Metric M12-1.0 mm bushings (threaded hole) to English 3/8”-24 bolt end Purpose of that tool: Connects standard Jacobs drill chuck to UNIMAT tailstock. The accessory is tested on an UNIMAT SL DB 200 Materials: Steel, hex bar - the hex shape allows for easy mounting on the lathe spindle Options: Aluminum version and/or M14-1.0 on request or/and alrea
More

Unimat Lathe - 3/8-24 Jacobs...

$20.45
eBay Unimat Lathe - 3/8-24 Jacobs Drill Chuck Adapter In Aluminum -- From Lathecity
+ $5.20 shipping
/unimat-lathe-3824/g8VAoLxO6pN_DwAbTSAl0g==/info
eBay
IN_STOCK ( In stock )
UNIMAT SL DB Lathe Accessory Connects a standard Jacobs drill chuck to UNIMAT tailstock M12-1.0 mm bushings to 3/8”-24 pin end, aluminum Size: Metric M12-1.0 mm bushings (threaded hole) to English 3/8”-24 bolt end Purpose of that tool: Connects standard Jacobs drill chuck to UNIMAT tailstock. The accessory is tested on an UNIMAT SL DB 200 Materials: Aluminum, hex bar - the hex shape allows for easy mounting on the lathe spindle Options: Steel version and/or M14-1.0 on request. M12 = M14 = s
More

Buddy Bar For Unimat Lathe -...

$12.99
eBay Buddy Bar For Unimat Lathe - Unimat Sl Db - Align Your Lathe - From Lathecity
+ $2.50 shipping
/buddy-bar-for-unimat/KuFNDKNuZ8qEuiXdV9IpbA==/info
eBay
IN_STOCK ( In stock )
UNIMAT Lathe Accessory Align you lathe perfectly to machine pieces with small run-out Buddy Bar Size: Double pin end (tool steel) that fits perfectly in the UNIMAT SL DB lathe spindle and tailstock spindle. Purpose of that tool: If one wants to machine pieces with a small run-out (high centricity), the work piece must be perfectly center drilled. That doesn’t work too easily on an UNIMAT SL DB since the headstock is rotatable and it is only aligned with a pin. Even if that pin is used, one ca
More

Adjustable Tool Post For...

$39.00
eBay Adjustable Tool Post For Unimat 3 Lathe
+ $6.50 shipping
/adjustable-tool-post-for/fJ1s2i1FH6aAuYWyIBLKTQ==/info
eBay
IN_STOCK ( In stock )
A adjustable Tool Post for the Unimat 3 Lathe that is new.The adjusting ring is 1 1/4 in diameter and it uses 1/4 tool bits or 5/16 shank tools.It has the extra height to reach the 23 mm (.905) from the top of the compound to the center line.The Tool Post and adjusting parts are made from prehardened and alloy steels for durability with a blackening finish.
More

Shop Fox M1112 Gunsmith Lathe...

Free Shipping
3 stores Shop Fox M1112 Gunsmith Lathe (754001511125)
Removable gap bed allows turnings up to 17-Inch in Diameter Easy to use lever controls Hardened and...
More

Unimat Replacement Drive...

$7.85
eBay Unimat Replacement Drive Belts For The Db Sl Lathe, Emco, Belt, 3 Sets
+ $2.45 shipping
/unimat-replacement-drive/vcEYgt5eZ5XYgzNhobko9Q==/info
eBay
IN_STOCK ( In stock )
Up for your consideration are replacement drive belts for the Unimat DB, DB200, SL or SL1000 lathes. You are getting 3 sets/6 total belts, they are new and fit great. The belts are ready to be used and do not need to be cut, welded, fused or glued together. One belt runs from the motor pulley to the idler pulley and the other belt goes between the idler pulley and the drive pulley on the head stock. Please note the assembly, as you see them pictured (lathe is not included). • I ship out daily
More

Unimat 4 Jaw Independent...

$225.00
eBay Unimat 4 Jaw Independent Lathe Chuck No.1002 Thread 12 X 1mm
Free Shipping
/unimat-4-jaw-independent/IKWJxxmu0ImAkrx_KQ8evg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
UNIMAT 4 JAW INDEPENDENT LATHE CHUCK # 1002 , THREAD 12 X 1mm .CHUCK IS IN NEW, NEVER USED CODITION, COMPLETE WITH KEY. THE SALE IS FOR UNIMAT INDEPENDENT 4 JAW CHUCK COMPLETEWITH KEY,BOX.THIS IS ORIGINAL MADE IN AUSTRIA . CHUCK HAS CHECKED FOR COMPLETE WORKING CONDITION.PLEASE JUDGE IN PICTURE FOR DETAIL CONDITION.COME AS SHOW IN PICTURE AGAIN PLEASE SEE PICTURE FOR ACTUAL ITEM YOU BUYING. * Please email if you may have any question.* Buyer in Hawaii, Alaska and Puerto Rico please email for sh
More

A2z Qctp Quick Change...

$99.95
eBay A2z Qctp Quick Change Toolpost For Unimat Lathes -usa Made Ships Free In Usa
Free Shipping
/a2z-qctp-quick-change/rzt2rfK_3NvcFKS4EyMXUA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
A2Z CNC brand Quick Change Toolpost QCTP for Unimat Lathes Usable for small work on bigger machines. The Best Value In a Deluxe USA Made QCTP Special: Free Domestic USPS Priority shipping! $12.00 international USPS First Class Shipping! www.A2ZCorp.us This QCTP received a great review in Home Shop Machinist magazine Sept/Oct 2005 Made in the USA on our own new Haas CNC equipment by people born and rasied in the USA and sold direct by the manufacturer Improved design of a classic lathe accessory
More

South Bend 14 x 40 Variable...

$21,046.70
Elite Metal Tools South Bend 14 x 40 Variable Speed Toolroom Lathe SB1013
Free Shipping
/south-bend-14-x-40/kFfaW-9clBgRzclemgMT-Q==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
These South Bend EVS lathes are supplied with an adjustable feed rod clutch and stop collar on the feed rod. This is a great safety feature when working close to the chuck. Set the stop collar so the saddle and tool post are positioned at a safe distance from the chuck and tighten the lock screw. Adjust the feed rod clutch to a low setting. If the carriage comes into contact with the collar, the clutch slips, saving your machine from a serious crash.Standard Equipment:Allen Bradley electrical componentsMeehani te casting, signature South Bend 3 V-bed8 3 jaw scroll chuck w/ D1-6 plate10 4 jaw ind. chuck D1-612 faceplateSafety chuck guard with microswitch shut-offSteady rest with roller tipsFollow rest4-way tool postHalogen lampComplete coolant systemMicrometer carriage stopSpindle sleeve... Less
More

Adjustable Tool Post For...

$39.00
eBay Adjustable Tool Post For Unimat Sl Db Lathe
+ $6.50 shipping
/adjustable-tool-post-for/gHNKaft1wi7XBYbaekE22Q==/info
eBay
IN_STOCK ( In stock )
A adjustable Tool Post for the Unimat SL Lathe that is new.The adjusting ring is 1 1/4 in diameter and it uses 1/4 tool bits or 5/16 shank tools.The Tool Post and adjusting parts are made from prehardened and alloy steels for durability with a blackening finish.Tool bit not included.
More

Unimat Sl1000 / Db200 Lathe,...

$148.00
eBay Unimat Sl1000 / Db200 Lathe, Cnc Conversion Kit ( Option 1 )
+ $8.50 shipping
/unimat-sl1000-db200/XPvIeEqjKOV68rZYKeWWSA==/info
eBay
IN_STOCK ( In stock )
Unimat SL1000 / DB200 Lathe CNC Conversion Kit This kit is Option 1. Option 1: Includes MECHANICAL PARTS ONLY. Electronics, miscellaneous wires, an enclosure and assembly are not included. The CNC Conversion kit is designed for hobbyists, education, and R D alike and can adapt to a wide variety of projects- prototyping, model making, customization - even light production. With this CNC Conversion kit lathe both MANUAL and CNC operations are provided. With this CNC Conversion kit, you will be ab
More

South Bend 16 x 40 Gearhead...

$22,230.00
Elite Metal Tools South Bend 16 x 40 Gearhead Lathe with DRO SB1054F
Free Shipping
/south-bend-16-x-40/jXpkNrps_Rd-dYFWxdzRLQ==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
Standard Equipment:Fagor DRO9 3-Jaw Scroll Chuck (Bolt on Jaws)10 D1-6 4-Jaw Independent ChuckChuck Safety Guard with Limit Switch12 FaceplateSteady RestFollow RestHalogen Work LightCoolant SystemDead Center MT #4, 2 pcsSpindle Center Sleeve MT #6 - MT #4Micrometer Carriage Stop4-Way Tool PostTool Set & BoxLevel Pads 6 pcsFeatures: Three V-way BedJapanese Spindle BearingsFull Length Splash GuardOperation ManualAllen Bradley ControlsHandwheel Safety GuardSliding Chip TrayWood CrateSpecificatio ns:Swing over bed: 16.14Distance between centers: 40Swing over cross slide: 10.39Swing over gap: 22.95Cross slide travel: 8.6Compound travel: 5.1Spindle nose: D1-6Spindle bore: 2.066Spindle taper: MT #6Spindle speeds: (16), 40-2000 RPMTailstock taper: MT #4Tailstock travel: 6Tailstock barrel... Less
More

2 X 3-jaw Mini Lathe Chuck...

$82.50
eBay 2 X 3-jaw Mini Lathe Chuck Self-centering Reversible Jaws Mt2 Arbor Unimat
+ $5.95 shipping
/2-x-3jaw-mini-lathe/RSSC6JEGPrd2TY9xs3k6lA==/info
eBay
IN_STOCK ( In stock )
ebay template Title: 2 x 3-Jaw Mini Lathe Chuck Self-Centering Reversible Jaws MT2 Arbor Unimat New eBay Item Specifics: MODEL 2 x 3-Jaw Self-Centering Chuck w/ MT2 Arbor COMPATIBLE WITH: M12x1 Thead on chuck fits Unimat SL Series Lathes Condition Description: New Buy It Now Price: $79.95 Description: This is a 2diameter x 3-Jaw Self-Centering (Simultaneous) Mini Lathe Scroll Chuck with a MT2 Arbor .This beautiful professional quality chuck has the following specifications: BODY IS 2 IN DIAM
More

2 X 3-jaw Self-centering Mini...

$84.95
eBay 2 X 3-jaw Self-centering Mini Lathe Chuck M12x1 Thread For Unimat Sl Lathes
+ $5.95 shipping
/2-x-3jaw-selfcentering/L4-3O-hfOkcFcX4nRhTPug==/info
eBay
IN_STOCK ( In stock )
ebay template Title: 2 x 3-Jaw Self-Centering Mini Lathe Chuck M12x1 Thread For Unimat SL Lathes New eBay Item Specifics: MODEL 2 x 3-Jaw Self-Centering Chuck w/ M12 x 1 Threads COMPATIBLE WITH: M12 x 1 Thread on Chuck Fits UNIMAT SL Lathes Condition Description: New Buy It Now Price: $84.95 Description: This is a 2diameter x 3-Jaw Self-Centering (Simultaneous) Mini Lathe Scroll Chuck with a M12x1 Female Threads to fit Unimat SL Lathes .This beautiful professional quality chuck has the follo
More

South Bend 16 x 60 Gearhead...

$23,621.00
Elite Metal Tools South Bend 16 x 60 Gearhead Lathe with DRO SB1055F
Free Shipping
/south-bend-16-x-60/Qj_CZBmy9zB0IiaAl0_7Lw==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
Standard Equipment:Fagor DRO9 3-Jaw Scroll Chuck (Bolt on Jaws)10 D1-6 4-Jaw Independent ChuckChuck Safety Guard with Limit Switch12 FaceplateSteady RestFollow RestHalogen Work LightCoolant SystemDead Center MT #4, 2 pcsSpindle Center Sleeve MT #6 - MT #4Micrometer Carriage Stop4-Way Tool PostTool Set & BoxLevel Pads 6 pcsFeatures: Three V-way BedJapanese Spindle BearingsFull Length Splash GuardOperation ManualAllen Bradley ControlsHandwheel Safety GuardSliding Chip TrayWood CrateSpecificatio ns:Swing over bed: 16.14Distance between centers: 60Swing over cross slide: 10.39Swing over gap: 22.95Cross slide travel: 8.6Compound travel: 5.1Spindle nose: D1-6Spindle bore: 2.066Spindle taper: MT #6Spindle speeds: (16), 40-2000 RPMTailstock taper: MT #4Tailstock travel: 6Tailstock barrel... Less
More

JET ZX Lathe - 14 x 60, Model...

$18,000.00
Northern Tool JET ZX Lathe - 14 x 60, Model GH-1460ZX
Free Shipping
/jet-zx-lathe-14-x-60/_fWzMwu8haPevXEmj8k3aQ==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The 14in. ZX Series large spindle bore lathe is designed exclusively by with a 3 1/8in. bore spindle supported by two tapered and one ball bearing. Chrome molybdenum headstock gears are hardened, ground and shaved. Universal gearbox allows inch, metric, diametric and module pitch threads, no change gears required. Carriage features one-shot lubrication and Turcite B on bed sliding surfaces. Dimensions L x W x H in. 117 x 40 x 48, Carriage Travel in. 55, Width Between Centers in. 60, HP 7.5, Thread Cutting in. 1 5/8-72, Volts 230/460V pre-wired 230V, Stand Included Yes, Thread Cutting mm 0.05-20, Spindle Speeds qty. 12, Speed RPM 42-1,800. T-slotted compound slide featuring a four-way tool post One-piece cast iron base absorbs vibration allowing heavier cuts High-quality ANSI Class 50... Less
More

South Bend 16 x 40 3-phase...

$22,258.50
Elite Metal Tools South Bend 16 x 40 3-phase EVS Toolroom Lathe SB1038
Free Shipping
/south-bend-16-x-40/WrCpjjzP-zPgGQH_iVAH9g==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
These South Bend EVS lathes are supplied with an adjustable feed rod clutch and stop collar on the feed rod. This is a great safety feature when working close to the chuck. Set the stop collar so the saddle and tool post are positioned at a safe distance from the chuck and tighten the lock screw. Adjust the feed rod clutch to a low setting. If the carriage comes into contact with the collar, the clutch slips, saving your machine from a serious crash.Standard Equipment:Allen-Br adley® electrical componentsMeehani te casting, signature South Bend 3 V-bed9 3 jaw scroll chuck w/ D1-6 back plate10 4 jaw ind. chuck D1-612 faceplateSafety chuck guard with microswitch shut-offSteady rest with roller tipsFollow rest4 way tool postHalogen lampComplete coolant systemMicrometer carriage stopSpindle... Less
More

Special Nut/pulley For Power...

$23.88
eBay Special Nut/pulley For Power Feed On Unimat Db200 & Sl1000 Lathe, Jam,
Free Shipping
/special-nutpulley-for/4UuZw5Qg83GeMICNdwP-HA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Up for your consideration is the special Nut/Pulley that is needed when you have the power feed attachment on a Unimat DB200 SL1000 lathe. You replace the head stock jam nut with this Nut/Pulley. It has a M12 X 1 threaded hole with 19mm hex. They were custom made for me by a very skilled tool die/clock maker. The quality is over the top. You can also use this Nut/Pulley as a regular jam nut. The picture is a stock photo of the actual item being sold. • I ship out daily (except Sunday Holidays
More

Buddy Bar Mt0 To Mt0 -...

$24.99
eBay Buddy Bar Mt0 To Mt0 - Unimat/craftsman - Align Your Lathe - Lathecity
+ $4.00 shipping
/buddy-bar-mt0-to-mt0/JS7oqieFGR5YSTkWZ7HOEQ==/info
eBay
IN_STOCK ( In stock )
Align you lathe perfectly to machine pieces with small run-out Budy Bar - make sure you order the right taper size, this here is MT0-MT0 Morse taper #0 on both ends Size: Double pin end Morse #0 to Morse #0. Other sizes can be made or are already available at eBay such as MT0-MT0, MT3-MT2, UNIMAT alignment pin, MT1-MT0 Where may this fit? -) MT0-MT0 is used on Craftsman with retrofitted spindles (original Craftsman would need a slightly different size)-) MT0-MT0, UNIMAT's with LatheCity spindle
More

Laser Protractor / Morse...

$59.99
eBay Laser Protractor / Morse Taper Cutter For Unimat Sl Db Lathe - From Lathecity
+ $5.25 shipping
/laser-protractor-morse/PEYJ_b-fGl142NL0ZyATAg==/info
eBay
IN_STOCK ( In stock )
LASER protractor / Machine taper cutter for UNIMAT SL DB lathe from LatheCity What does this tool do? One can cut Morse Taper and Morse arbors easily even on a small home shop lathe. Since labor costs are not an issue for hobby type work, you can make these accessories by yourself for close to zero dollars. All you need to do is setting the cutting angle precisely enough. Our LASER protractor is exactly doing this for you, making the entire process a piece of cake. Cutting a perfectly fitting M
More

Unimat Parts Db 200/sl 1000...

$13.50
eBay Unimat Parts Db 200/sl 1000 T-slot Adapter Screw
Free Shipping
/unimat-parts-db-200sl/8ORTtwy9pk1gQ0UP5KLQ5A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Unimat DB 200 or SL 1000 T-Slot Adapter Screw # 105/05. Thread size 12MM X 1. Will not fit the Unimat 3. New, Never Used. This screw fits the T-Slot in the Unimat cross slide, and has the same thread as the Unimat Lathe spindle. Thus, you can take any Unimat lathe spindle accessory (such as faceplate, lathe or collet chucks) and mount the accessory into the Unimat cross slide! As a result, lathe and collet chucks offer extra versatility as precision circular vises, idealy suited for chucking an
More

South Bend 21 x 60 Turn-Nado...

$44,520.00
Elite Metal Tools South Bend 21 x 60 Turn-Nado EVS Lathe with DRO SB1042PF
Free Shipping
/south-bend-21-x-60/79gsECHHoPw70oxdGDzPxA==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
Standard Equipment:Fagor DRO12 3-Jaw Scroll Chuck (Bolt on Jaws)14 D1-8 4-Jaw Independent ChuckChuck Safety Guard with Limit Switch14 FaceplateSteady RestFollow RestHalogen Work LightCoolant SystemDead Center MT #5, 2 pcsSpindle Center Sleeve MT #7 - MT #5Micrometer Carriage Stop4-Way Tool PostTool Set & BoxLevel Pads 8 pcsFeatures: Three V-way BedFAG German BearingsFull Length Splash GuardOperation ManualAllen Bradley ControlsHandwheel Safety GuardSliding Chip TrayYaskawa InverterWood CrateSpecificatio ns:Swing over bed: 20.98Distance between centers: 60Swing over cross slide: 14.01Swing over gap: 31.10Cross slide travel: 11Compound travel: 5.39Spindle nose: D1-8Spindle bore: 3.149Spindle taper: MT #7Spindle speeds: (EVS), 18-1800 RPMTailstock taper: MT #5Tailstock travel: 6.5Tailstock... Less
More

South Bend 18 x 80 Turn-Nado...

$46,113.00
Elite Metal Tools South Bend 18 x 80 Turn-Nado EVS Lathe with DRO SB1061PF
Free Shipping
/south-bend-18-x-80/CqTL4sBi4RICzYpYonoEZA==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
Standard Equipment:Fagor DRO12 3-Jaw Scroll Chuck (Bolt on Jaws)14 D1-8 4-Jaw Independent ChuckChuck Safety Guard with Limit Switch14 FaceplateSteady RestFollow RestHalogen Work LightCoolant SystemDead Center MT #5, 2 pcsSpindle Center Sleeve MT #7 - MT #5Micrometer Carriage Stop4-Way Tool PostTool Set & BoxLevel Pads 8 pcsFeatures: Three V-way BedFAG German BearingsFull Length Splash GuardOperation ManualAllen Bradley ControlsHandwheel Safety GuardSliding Chip TrayYaskawa InverterWood CrateSpecificatio ns:Swing over bed: 18.11Distance between centers: 80Swing over cross slide: 11.02Swing over gap: 27.95Cross slide travel: 10.7Compound travel: 5.39Spindle nose: D1-8Spindle bore: 3.149Spindle taper: MT #7Spindle speeds: (EVS), 18-1800 RPMTailstock taper: MT #5Tailstock travel:... Less
More

South Bend 18 x 60 3-phase...

$41,341.00
Elite Metal Tools South Bend 18 x 60 3-phase EVS Toolroom Lathe SB1036
Free Shipping
/south-bend-18-x-60/DgB7uaYCLtk9gmxpQbKIxA==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
Standard Equipment:Allen-Br adley® electrical componentsMeehani te casting, signature South Bend 3 V-bed12 3 jaw scroll chuck w/ D1-8 back plate14 4 jaw ind. chuck D1-814 faceplate D1-8Safety chuck guard with microswitch shut-offSteady rest with roller tipsFollow rest4 way tool postHalogen lampComplete coolant systemMicrometer carriage stopSpindle sleeve MT#7/MT#5Two MT#5 dead centersThreading dial indicatorLeveling pads - 8FAG or SKF German spindle bearingsFull length splash guardFront removable sliding chip trayTool set and boxOperation manual and parts listYaskawa G7A4011 inverterOptional Accessories: Taper attachment (unmounted) Model SB1271Collet attachment 5-C, quick change (unmounted) Model SB127212 back plate D1-8Quick change tool post system (see Tooling section)Live centersMT#5... Less
More

Unimat 3 / Grizzly M14 To...

$34.99
eBay Unimat 3 / Grizzly M14 To 1/2-20 Jacobs Drill Chuck Adapter Steel From Lathecity
+ $4.00 shipping
/unimat-3-grizzly-m14-to/xadTjdce7BoaN8bRNBbzaQ==/info
eBay
IN_STOCK ( In stock )
UNIMAT 3 Lathe Accessory Seems also to fit Grizzly Micro Lathe Connects a standard Jacobs drill chuck to tailstock M14-1.0 mm bushings to 1/2”-20 pin end, steel, hex Size: Metric M14-1.0 mm bushings (threaded hole) to English 1/2”-20 bolt end Purpose of that tool: Connects standard Jacobs drill chuck to UNIMAT 3 tailstock. The accessory is tested on an UNIMAT Materials: Steel, hex bar - the hex shape allows for easy mounting on the lathe spindle All LatheCity tools come with a small manual
More

South Bend 21 x 120 Turn-Nado...

$53,100.00
Elite Metal Tools South Bend 21 x 120 Turn-Nado EVS Lathe with DRO SB1045PF
Free Shipping
/south-bend-21-x-120/EpwSX7mmHB7VdBkBHvh7ag==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
Standard Equipment:Fagor DRO12 3-Jaw Scroll Chuck (Bolt on Jaws)14 D1-8 4-Jaw Independent ChuckChuck Safety Guard with Limit Switch14 FaceplateSteady RestFollow RestHalogen Work LightCoolant SystemDead Center MT #5, 2 pcsSpindle Center Sleeve MT #7 - MT #5Micrometer Carriage Stop4-Way Tool PostTool Set & BoxLevel Pads 10 pcsFeatures: Three V-way BedFAG German Precision BearingsFull Length Splash GuardOperation ManualAllen Bradley ControlsHandwheel Safety GuardSliding Chip TrayYaskawa InverterWood CrateSpecificatio ns:Swing over bed: 21Distance between centers: 120Swing over cross slide: 14.01Swing over gap: 31.10Cross slide travel: 11Compound travel: 5.39Spindle nose: D1-8Spindle bore: 3.149Spindle taper: MT #7Spindle speeds: (EVS), 18-1800 RPMTailstock taper: MT #5Tailstock travel:... Less
More

JET 2 in. Lathe with Taper...

$15,299.00
CPO Jet JET 2 in. Lathe with Taper Attachment 321852
Free Shipping
/jet-2-in-lathe-with/N7mhv0Tkg8rQ2p8qgTkdKw==/info
CPO Jet
IN_STOCK ( In stock )
Store not rated
Free Shipping
GH-1640ZK 2 in. Lathe - 321852. Taper Attachment - 321293. Steady Rest. Follow Rest. 8 in. Three Jaw Scroll Chuck. 8 in. Drive Plate. 10 in. Four Jaw Independent Chuck. 16 in. Face Plate. Tool Box Kit. Lathe bed is made of cast iron with low vibration and high rigidity. Two precision-ground v-slideways, reinforced by supersonic frequency hardening, offer precision guidance for the carriage. The headstock is cast from high-grade, low-vibration cast iron with the spindle supported by a cylindrical bearing at the front, a tapered roller bearing, and a ball bearing. Lathe adopts a three-axle sliding common gear mechanism which together with the thread selection change mechanism and doubling mechanism, enable it to cut a comprehensive range of metric, modular, and diametrical pitch threads... Less
More

South Bend 21 x 60 Turn-Nado...

$36,250.00
Elite Metal Tools South Bend 21 x 60 Turn-Nado Gearhead Lathe with DRO SB1046PF
Free Shipping
/south-bend-21-x-60/avSo_ExGePfXP92QT8zUyA==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
Standard Equipment:Fagor DRO12 3-Jaw Scroll Chuck (Bolt on Jaws)14 D1-8 4-Jaw Independent ChuckChuck Safety Guard with Limit Switch14 FaceplateSteady RestFollow RestHalogen Work LightCoolant SystemDead Center MT #5, 2 pcsSpindle Center Sleeve MT #7 - MT #5Micrometer Carriage Stop4-Way Tool PostTool Set & BoxLevel Pads 8 pcsFeatures: Three V-way BedFAG German BearingsFull Length Splash GuardOperation ManualAllen Bradley ControlsHandwheel Safety GuardSliding Chip TrayWood CrateSpecificatio ns:Swing over bed: 21Distance between centers: 60Swing over cross slide: 14.01Swing over gap: 31.10Cross slide travel: 11Compound travel: 5.39Spindle nose: D1-8Spindle bore: 3.149Spindle taper: MT #7Spindle speeds: (16), 20-1600 RPMTailstock taper: MT #5Tailstock travel: 6.5Tailstock barrel diameter:... Less
More

South Bend 18 x 40 Turn-Nado...

$32,283.70
Elite Metal Tools South Bend 18 x 40 Turn-Nado Gearhead Lathe with DRO SB1056F
Free Shipping
/south-bend-18-x-40/b5O0TcFwNlubn-JZreYTBA==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
Standard Equipment:Fagor DRO12 3-Jaw Scroll Chuck (Bolt on Jaws)14 D1-8 4-Jaw Independent ChuckChuck Safety Guard with Limit Switch14 FaceplateSteady RestFollow RestHalogen Work LightCoolant SystemDead Center MT #5, 2 pcsSpindle Center Sleeve MT #7 - MT #5Micrometer Carriage Stop4-Way Tool PostTool Set & BoxLevel Pads 8 pcsFeatures: Three V-way BedFAG German BearingsFull Length Splash GuardOperation ManualAllen Bradley ControlsHandwheel Safety GuardSliding Chip TrayWood CrateSpecificatio ns:Swing over bed: 18.11Distance between centers: 40Swing over cross slide: 11.02Swing over gap: 27.95Cross slide travel: 11Compound travel: 5.39Spindle nose: D1-8Spindle bore: 3.149Spindle taper: MT #7Spindle speeds: (16), 20-1600 RPMTailstock taper: MT #5Tailstock travel: 6.5Tailstock barrel diameter:... Less
More

Unimat 4 Way Tool Post 1 3/4...

$49.99
eBay Unimat 4 Way Tool Post 1 3/4 X 1 3/4 For Sl 1000 Or Db 200 Cnc
Free Shipping
/unimat-4-way-tool-post-1/D0iP6SBZi_gFosT9hrRBDw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
LATHE 4 WAY TOOL POST 1 3/4 x 1 3/4 for Unimat SL 1000 or DB 200 All steel Includes T nut Please feel free to call me with any questions at:Phone: 505-880-1540 Thanks John
More

South Bend 18 x 40 Turn-Nado...

$40,504.00
Elite Metal Tools South Bend 18 x 40 Turn-Nado EVS Lathe with DRO SB1059F
Free Shipping
/south-bend-18-x-40/ksem_pz5Mq779fAt5bYYcA==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
Standard Equipment:Fagor DRO12 3-Jaw Scroll Chuck (Bolt on Jaws)14 D1-8 4-Jaw Independent ChuckChuck Safety Guard with Limit Switch14 FaceplateSteady RestFollow RestHalogen Work LightCoolant SystemDead Center MT #5, 2 pcsSpindle Center Sleeve MT #7 - MT #5Micrometer Carriage Stop4-Way Tool PostTool Set & BoxLevel Pads 8 pcsFeatures: Three V-way BedFAG German BearingsFull Length Splash GuardOperation ManualAllen Bradley ControlsHandwheel Safety GuardSliding Chip TrayYaskawa InverterWood CrateSpecificatio ns:Swing over bed: 18.11Distance between centers: 40Swing over cross slide: 11.02Swing over gap: 27.95Cross slide travel: 10.7Compound travel: 5.39Spindle nose: D1-8Spindle bore: 3.149Spindle taper: MT #7Spindle speeds: (EVS), 18-1800 RPMTailstock taper: MT #5Tailstock travel:... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355