Showing results for "turret lathe tool"
Results 1 - 40 of 1500+

Square Indexing Turret Tool...

$472.43
eBay Square Indexing Turret Tool Post, 13-16 Lathe Swing, 4-1/2 Width | (6b)
Free Shipping
/square-indexing-turret/oWsiPOC9CieN5UwRnKE_Xw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Turret Tool Post New Free Shipping SPECS *Note: If you have any issues at all with your order, it is faster and easier for us to use the ebay messaging system to come to a resolution rather than opening a case*
More

SHOP FOX M1016 Lathe...

Free Shipping
2 stores SHOP FOX M1016 Lathe (754001510166)
More

Lathe Turret Or Quick Change...

$35.00
eBay Lathe Turret Or Quick Change Boring Bar Holder Bar 3/4 Tab 1/2 Usa Made
+ $6.00 shipping
/lathe-turret-or-quick/fQ1y5PkjHFrdIgwU74JK2A==/info
eBay
IN_STOCK ( In stock )
this is a boring bar holder 3/4 inch bar 1/2 inch tqb for your lathe and 2 screws to hold the bar made in small town USA tied of cheap tools made poorly we built our own and they worked so well we started selling them so here it is AYDEN new #stock# wbbhx3412
More

JET 321892 4-1/2 in. Lathe...

$30,999.00
CPO Outlets JET 321892 4-1/2 in. Lathe with ACU-RITE 200S DRO
Free Shipping
/jet-321892-412-in/_MU1ICNa6LiYN3mk-hNRtg==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
LGH-26120ZH 4-1/2 in. Lathe with ACU-RITE 200S DRO - 321892. (2) Steady Rests. Follow Rest. Three Jaw Scroll Chuck. Drive Place. Four Jaw Independent Chuck. Face Plate. 170 - 210mm Round Nut Spanner. (4) Change Gears - 63T, 69T, 78T, 90T. Tool Box Kit. Lathe bed is made of cast iron with low vibration and high rigidity. Two precision-ground v-slideways, reinforced by supersonic frequency hardening, offer precision guidance for the carriage. The headstock is cast from high-grade, low-vibration cast iron with the spindle supported by a cylindrical bearing at the front, a tapered roller bearing, and a ball bearing. Lathe adopts a three-axle sliding common gear mechanism which together with the thread selection change mechanism and doubling mechanism, enable it to cut a comprehensive range of... Less
More

Lathe Turret Or Quick Change...

$30.00
eBay Lathe Turret Or Quick Change Boring Bar Holder 1/2 In Hole 1/2 Tab
+ $6.00 shipping
/lathe-turret-or-quick/xTpqunQBVP5i7-aW2XYahg==/info
eBay
IN_STOCK ( In stock )
this is a boring bar holder we made because of lack of anything else of quality on the market its 2 inches long and has a 1/2 inch tab for holding onto the lathe and a 1/2 inch hole for a boring bar stock wbbh1212
More

Lathe Turret Or Quick Change...

$30.00
eBay Lathe Turret Or Quick Change Boring Bar Holder 3/4 Inch Bar 3/8 Tab Made In Usa
+ $6.00 shipping
/lathe-turret-or-quick/NcD2oFdS-lE_xJbQgQCrxA==/info
eBay
IN_STOCK ( In stock )
This is a boring bar holder for a 3/4 inch bar with a 3/8 inch tab for holding on your tool post its about 2 1/2 inches long with 2 screws to hold the bar in place unhappy with the cheap chinese holders and too poor for the expensive ones we made a few of these and they worked so well we made a few more and these are what we have left wbbh3438
More

Lathe Turret Or Quick Change...

$30.00
eBay Lathe Turret Or Quick Change Boring Bar Holder 1/2 Inch Bar 3/8 Tab Made In Usa
+ $6.00 shipping
/lathe-turret-or-quick/QTlG7o1_t_yYSuq70KGU9g==/info
eBay
IN_STOCK ( In stock )
This is a holder for a 1/2 inch bar with a 3/8 inch tab for your tool post to hold it its about 1 7/8 inches long unhappy with the chiese holders and no willing to pay for the good ones we made a few of these we use them everyday and decided to sell the extras wbbh1238
More

Lathe Turret Or Quick Change...

$35.00
eBay Lathe Turret Or Quick Change Boring Bar Holder 3/4 Inch Bar 3/8 Tab Usa
+ $6.00 shipping
/lathe-turret-or-quick/RuZhtkUfLysRp8QqGz415w==/info
eBay
IN_STOCK ( In stock )
This is a boring bar holder for a 3/4 inch bar with a 3/8 inch tab for holding on your tool post its about 2 1/2 inches long with 2 screws to hold the bar in place unhappy with the cheap chinese holders and too poor for the expensive ones we made a few of these and they worked so well we made a few more and these are what we have left wbbh 3438
More

Lathe Turret Or Quick Change...

$30.00
eBay Lathe Turret Or Quick Change Boring Bar Holder 1/2 Inch Bore 5/16 Tab Usa
+ $6.00 shipping
/lathe-turret-or-quick/Wx5vcSiSlBUI_12m2ExKEw==/info
eBay
IN_STOCK ( In stock )
This holder has a bore of 1/2 inch and the tab for holding to your tool post is 5/16 it is about 1 7/8 inches long with 2 screws on to to hold your bar wbbh 12516
More

Lathe Turret Or Quick Change...

$35.00
eBay Lathe Turret Or Quick Change Boring Bar Holder 3/4 Inch Bar 3/8 Tab
+ $6.00 shipping
/lathe-turret-or-quick/XZGmy1aBhVBVgf3SAjnrBQ==/info
eBay
IN_STOCK ( In stock )
This is a boring bar holder for a 3/4 inch bar with a 3/8 inch tab for holding on your tool post its about 2 1/2 inches long with 2 screws to hold the bar in place unhappy with the cheap chinese holders and too poor for the expensive ones we made a few of these and they worked so well we made a few more and these are what we have left wbbh3438
More

Lathe Tool Post - 12700-93

$165.21
Sears Parts Direct Lathe Tool Post - 12700-93
Free Shipping
/lathe-tool-post-1270093/re0onTRflSoRCgwWsumFtw==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Free Shipping
Pricing Subject to Change. Lathe Tool Post
More

Lathe Turret Or Quick Change...

$30.00
eBay Lathe Turret Or Quick Change Boring Bar Holder 1/2 Inch W 3/8 Tab Usa
+ $6.00 shipping
/lathe-turret-or-quick/YXavuy0eKCMrK8prR7fn5A==/info
eBay
IN_STOCK ( In stock )
This is a holder for a 1/2 inch bar with a 3/8 inch tab for your tool post to hold it its about 1 7/8 inches long unhappy with the chiese holders and no willing to pay for the good ones we made a few of these we use them everyday and decided to sell the extras wbbh1238
More

MGEHR2020-2 Turning Tool...

$12.38
Banggood MGEHR2020-2 Turning Tool Holder 20x125mm Lathe Grooving Cut-Off Cutter For MGMN200 Inserts-Turning Tool
Free Shipping
/mgehr20202-turning-tool/RZs4aGQuJIpctIoN_q18XA==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: MGEHR2020-2 Turning Tool Holder 20x125mm Lathe Grooving Cut-Off Cutter For MGMN200 Inserts Specifications: Model: MGEHR2020-2 Material: 42cr Direction: Right Hand Shank Diameter: 20mm Overall length: 125mm Accept Carbidge Inserts: MGMN200-G (Insert is NOT Included) Suitable For: Semi-finishing, finishing Quantity: 1pc x MGEHR2020-2 Lathe 1pc x Wrench Features: - High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing; - To maintain tight tolerances unmatched performance; - Practical and a variety of processing environments, even in very dirty environments such as cast iron also has good features; - User clamping and convenient way to replace, only a wrench to complete the replacement of the knife blade and pad; -... Less
More

Genuine Jacobs 1/2 Capacity...

$39.95
eBay Genuine Jacobs 1/2 Capacity Drill Chuck 1/2 Diameter Shank Turret Lathe Tool
+ $7.45 shipping
/genuine-jacobs-12/_ghuS03rtI_Q0KpW2eVZ9A==/info
eBay
IN_STOCK ( In stock )
New - Never used - Original Jacobs 3/64 - 1/2 1.5 - 13 mm capacity drill chuck with Jacobs key. Mounted on a new 1/2 diameter shank,2 5/8 long. Listing includes an original Jacobs key, may be thumb or T style, as available. Excellent unused condition. Always combine shipping - If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your
More

Lathe Turret Or Quick Change...

$35.00
eBay Lathe Turret Or Quick Change Boring Bar Holder 3/4 Inch Bar 1/2 Inch Tab
+ $6.00 shipping
/lathe-turret-or-quick/LmAwXa9LgUYW7f_kWXL3Og==/info
eBay
IN_STOCK ( In stock )
this is a boring bar holder for a 3/4 inch bar this one has a 1/2 inch tab 2 screws to hold the bar in place its 2 inches long unhappy with what was out on the market we made some of these to use and they worked so well we made some to sell here they are made in the usa on manual machines in a small town small machine shop may be painted black with regular spray paint only for storage purposes and will flake and wear off easily AYDEN new #stock # wbbhx3412
More

JET 321892 4-1/2 in. Lathe...

$30,999.00
Tyler Tool JET 321892 4-1/2 in. Lathe with ACU-RITE 200S DRO
Free Shipping
/jet-321892-412-in/zx9s3-N1GMk5WUk6QTf3Fw==/info
Tyler Tool
IN_STOCK ( In stock )
Free Shipping
LGH-26120ZH 4-1/2 in. Lathe with ACU-RITE 200S DRO - 321892. (2) Steady Rests. Follow Rest. Three Jaw Scroll Chuck. Drive Place. Four Jaw Independent Chuck. Face Plate. 170 - 210mm Round Nut Spanner. (4) Change Gears - 63T, 69T, 78T, 90T. Tool Box Kit. Lathe bed is made of cast iron with low vibration and high rigidity. Two precision-ground v-slideways, reinforced by supersonic frequency hardening, offer precision guidance for the carriage. The headstock is cast from high-grade, low-vibration cast iron with the spindle supported by a cylindrical bearing at the front, a tapered roller bearing, and a ball bearing. Lathe adopts a three-axle sliding common gear mechanism which together with the thread selection change mechanism and doubling mechanism, enable it to cut a comprehensive range of... Less
More

Lathe Quick Change Or Turret...

$30.00
eBay Lathe Quick Change Or Turret Boring Bar Holder 5/8 Bar 5/16 Tab Holder Usa Made
+ $6.00 shipping
/lathe-quick-change-or/CfbIBXC7jizehVHhztPJfw==/info
eBay
IN_STOCK ( In stock )
This is another of the holders we made and we are selling the extras its 5/8 bor holder with 5/16 tab to hold to the tool post wbbh58516
More

Lathe Quick Change Or Turret...

$30.00
eBay Lathe Quick Change Or Turret Boring Bar Holder 1/2 Inch Bar 5/16 Tab Usa Made
+ $6.00 shipping
/lathe-quick-change-or/_UiVefZHsIGprNRwxA8MSA==/info
eBay
IN_STOCK ( In stock )
This is another of the holders that we are selling the extras about 2 inches long 1/2 in bar holder and 5/16 tab for your tool post wbbh12516
More

Lathe Quick Change Or Turret...

$30.00
eBay Lathe Quick Change Or Turret Boring Bar Holder 3/8 Bar 3/8 Tab
+ $6.00 shipping
/lathe-quick-change-or/gbBuNi-AHMi8tZpWjEvEJA==/info
eBay
IN_STOCK ( In stock )
This is another of the holders we made and selling the extras its for a 3/8 bar and has a 3/8 tab to hold on to the tool post . Made in a small shop with all manual machines. Made in small town USA wbbh3838
More

Lathe Quick Change Or Turret...

$25.00
eBay Lathe Quick Change Or Turret Boring Bar Holder 3/8 Bar 3/8 Tab
+ $6.00 shipping
/lathe-quick-change-or/v7lg3ZcBuJpecDqCAuIRvw==/info
eBay
IN_STOCK ( In stock )
This is another of the holders we made and selling the extras its for a 3/8 bar and has a 3/8 tab to hold on to the tool post . Made in a small shop with all manual machines. Made in small town USA wbbh3838
More

Superior Cincinnati 1052 200...

$39.99
eBay Superior Cincinnati 1052 200 1125 Turret Lathe Collet Pads 1-1/8
+ $8.99 shipping
/superior-cincinnati-1052/Mrh8v77USoQb1LogyCTr_Q==/info
eBay
IN_STOCK ( In stock )
574-825-4990 SKU: 78087 ITEM TITLE Superior cincinnati 1052 200 1125 Turret lathe collet pads 1-1/8 Brand: Superior cincinnati Condition: New Model: 1052 200 1125 Country of Manufacture: Unknown Consigner: B Items in Lot: 1 Lister: 8 MPN: Unknown Weight (lbs, oz): 1,9 Warehouse Location: S3244 ABOUT CONTACT INFO Contact us Monday - Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES, LLC 221 US Highway 20 Suite B Middlebury, IN  46540 Phone:  1-574-825- 4990 Fax:      1-5
More

Superior Cincinnati 1026 200...

$39.99
eBay Superior Cincinnati 1026 200 1125 Turret Lathe Collet Pads 1-1/8
+ $8.99 shipping
/superior-cincinnati-1026/neqxSBtBzziqmd3ZntMFPQ==/info
eBay
IN_STOCK ( In stock )
574-825-4990 SKU: 78128 ITEM TITLE Superior cincinnati 1026 200 1125 Turret lathe collet pads 1-1/8 Brand: Superior cincinnati Condition: New Model: 1026 200 1125 Country of Manufacture: Unknown Consigner: B Items in Lot: 1 Lister: 8 MPN: Unknown Weight (lbs, oz): 1,9 Warehouse Location: S3243
More

Lathe Quick Change Or Turret...

$30.00
eBay Lathe Quick Change Or Turret Post Boring Bar Holder 3/8 Bar 5/16 Tab
+ $6.00 shipping
/lathe-quick-change-or/8kLKRP8qsq4BvGj__wIuqQ==/info
eBay
IN_STOCK ( In stock )
This is another of the holders we made and are selling the extras its about 2 inches long 3/8 bar holder with 5/16 tab 2 screws to hold it in place wbbh38516
More

Lathe Quick Change Or Turret...

$30.00
eBay Lathe Quick Change Or Turret Post Boring Bar Holder 3/8 Bar 5/16 Tab Usa
+ $6.00 shipping
/lathe-quick-change-or/I255GxJTLCLmoq33Gl1YeA==/info
eBay
IN_STOCK ( In stock )
This is another of the holders we made and are selling the extras its about 2 inches long 3/8 bar holder with 5/16 tab 2 screws to hold it in place wbbh 38516
More

Lathe Quick Change Or Turret...

$30.00
eBay Lathe Quick Change Or Turret Post 3/8 Boring Bar Holder 5/16 Tab Usa
+ $6.00 shipping
/lathe-quick-change-or/_2StUU6vLBhI9OH1RO42pg==/info
eBay
IN_STOCK ( In stock )
This is another of the holders we made and are selling the extras its about 2 inches long 3/8 bar holder with 5/16 tab 2 screws to hold it in place wbbh38516
More

Lathe Turret Or Quick Change...

$30.00
eBay Lathe Turret Or Quick Change Boring Bar Holder 1/2 Inch Wbbh1238
+ $6.00 shipping
/lathe-turret-or-quick/6HX0BAklR-SmU0blY1Dy_w==/info
eBay
IN_STOCK ( In stock )
This is a holder for a 1/2 inch bar with a 3/8 inch tab for your tool post to hold it its about 1 3/4 inches long unhappy with the chiese holders and no willing to pay for the good ones we made a few of these we use them everyday and decided to sell the extras w2306
More

Lathe Turret Or Quick Change...

$29.00
eBay Lathe Turret Or Quick Change Boring Bar Holder 1/2 Inch Wbbh1238
+ $6.00 shipping
/lathe-turret-or-quick/miAGk1GK2nuTrSJcuxrMmQ==/info
eBay
IN_STOCK ( In stock )
This is a holder for a 1/2 inch bar with a 3/8 inch tab for your tool post to hold it its about 1 3/4 inches long unhappy with the chiese holders and no willing to pay for the good ones we made a few of these we use them everyday and decided to sell the extras w2306
More

Lathe Turret Or Quick Change...

$30.00
eBay Lathe Turret Or Quick Change Boring Bar Holder 1/2 Inch Wbbh1238 Made In Usa
+ $6.00 shipping
/lathe-turret-or-quick/zqV9VyhZosmilShxPPRDIw==/info
eBay
IN_STOCK ( In stock )
This is a holder for a 1/2 inch bar with a 3/8 inch tab for your tool post to hold it its about 1 3/4 inches long unhappy with the Chinese holders and not willing to pay for the good ones we made a few of these we use them everyday and decided to sell the extras wbbh1238
More

PTG Lathe Centering Bar 1 x 8

$99.99
MidwayUSA PTG Lathe Centering Bar 1 x 8
+ $7.59 shipping
/ptg-lathe-centering-bar-1/wfV7wlVee5MmUqELWLQUpw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This steel centering bar allows the alignment of a lathe to be checked. Technical InformationNotes: Allows checking alignment of lathe. Recesses on each end align headstock and tailstock centers. Aids in offsetting tailstock for taper cutting. Steel.
More

Bardons & Oliver Instruction...

$35.00
eBay Bardons & Oliver Instruction Manual (3 Universal Turret Lathe) Electronic Copy
Free Shipping
/bardons-oliver/-727oLDbZc6N8pSIhkpGsw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Bardons Oliver Instruction Manual (#3 Universal Turret Lathe)Electronic Copy - We will send an paper copy for $45 #xxxx (NN) 7/17/2015 Shipping, Size and Weight: - You are welcome to arrange your own shipping. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. The USPS has a 70 lb weight limit with dimensional restrictions. UPS has a 150 lb weight limit with dimensional restrictions. International weight and size restricti
More

RIKON Power Tools 24 Lathe...

$159.99
Sears RIKON Power Tools 24 Lathe Bed Extension for 70-220VSR Lathe, Blue
Free Shipping
/rikon-power-tools-24/3o9N6mzp9FR8QYQZgee71A==/info
Sears
IN_STOCK ( In stock )
Free Shipping
24 Lathe Bed Extension for the RIKON 70-220VSR Midi Lathe enlarges the turning spindle length capacity of the machine from 20 to 42. Extension bolts directly onto the right, tailstock end of the midi lathe. Color: Blue.
More

Bardons & Oliver Instruction...

$45.00
eBay Bardons & Oliver Instruction Manual (3 Universal Turret Lathe) Paper Copy
Free Shipping
/bardons-oliver/H5KMiPtTL2Vx1zptky70hg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Bardons Oliver Instruction Manual (#3 Universal Turret Lathe) Paper Copy - We will send an electronic copy for $35 #xxxx (NN) 7/17/2015 Shipping, Size and Weight: - You are welcome to arrange your own shipping. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. The USPS has a 70 lb weight limit with dimensional restrictions. UPS has a 150 lb weight limit with dimensional restrictions. International weight and size restrict
More

SHOP FOX Mini Lathe - 6 Inch...

$739.99
Northern Tool SHOP FOX Mini Lathe - 6 Inch x 10., Model M1015
Free Shipping
/shop-fox-mini-lathe-6/qLmrg6sv7nCrLCIcZuTKNw==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The SHOP FOX Mini-Lathe is a perfect lathe for someone who wants a durable and well-designed machine that can fit in a small location. The M1015 gives model makers, toolmakers, gun hobbyists and weekend machinists a way to economically produce small precision parts, threaded parts, fittings, and dies. Cannot ship to AK, CA, CT, HI, MA, MD and RI. Center Height in. 10, HP 1/5, Volts 110, Stand Included No, Speed RPM 100- 2000. 3in. chuck with internal and external jaws Swing over bed 6in. Distance between centers 10in. Cross slide travel 2 3/8in. Spindle bore 3/8in. Spindle taper MT #2 Tailstock taper MT #1 Model Number: M1015. Size: 10. Age Group: Adult.
More

Superior Cincinnati S-style...

$44.99
eBay Superior Cincinnati S-style 1026-206-0000 Martin Style Turret Lathe Collet Pads
+ $9.99 shipping
/superior-cincinnati/BAQ2RHYZaz7E93tgsI5Kmw==/info
eBay
IN_STOCK ( In stock )
574-825-4990 SKU: 26752 ITEM TITLE Superior Cincinnati S-Style 1026-206-0000 Martin Style Turret Lathe Collet Pads Brand: Superior Cincinnati Condition: New Model: S-Style Consigner: B MPN: 1026-206-0000 Weight (lbs, oz): 3.25 Warehouse Location: S6126 Bullseye Catalog #:26752 Has # 471 stamped on part W S Weight: 3 lbs 4 oz ABOUT CONTACT INFO Contact us Monday - Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES, LLC 221 US Highway 20 Suite B Middlebury, IN  46540 Phone:  1-5
More

PTG Barrel Threading Lathe...

$42.99
MidwayUSA PTG Barrel Threading Lathe Bit 55-Degree 3/8
+ $4.99 shipping
/ptg-barrel-threading/S0he5XLQ6foNIWfRrskJ6w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The 55 Degree cutters are designed to cut the true threads of the 98 Mauser. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks.
More

PTG Barrel Threading Lathe...

$44.99
MidwayUSA PTG Barrel Threading Lathe Bit 60-Degree 5/16
+ $4.99 shipping
/ptg-barrel-threading/Tkvk0JCIBixp71RVbZ4Abg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The 60 Degree cutters duplicate most after market Mauser thread patterns. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks.
More

Carbide Lathe Tool Set, 5/16...

$67.71
Walmart.com Carbide Lathe Tool Set, 5/16 In
+ $7.80 shipping
/carbide-lathe-tool-set/bzZkoSgiku5clf3D-Dv57A==/info
Walmart.com
IN_STOCK ( In stock )
LathesLathe Tool Bit Set, Single Point Brazed Carbide Tipped, Number of Pieces 11, Capacity 5/16 In. Shanks, For Use With Lathes, Suitable For Machining A Wide Range Of Ferrous And Non-ferrous Materials. These Tools Are Used For Internal And External Operations. With This Set You Can Face, Rough, Finish Both To The Right And Left Plus Parting Or Cutting Off., Includes 11 Single Point Brazed Carbide Lathe Tool Bits Plus Case
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews.on-30371
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews.on-30371