Category

Tools and Accessories
Showing results for "tube pipe roller bender"
Results 1 - 40 of 1500+

Baileigh Hydraulic Roll...

$58,036.00
Elite Metal Tools Baileigh Hydraulic Roll Bender R-H120
Free Shipping
/baileigh-hydraulic-roll/Iyirl30evL9MdyGxSEwjVw==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
Need production from your ring rolling machine? With its 4-1/2 schedule 40 pipe capacity, the R-H120 is the machine you want. The double pinch design of the R-H120 helps minimize those money wasting pieces of straight that are commonly found at the start and finish of the bend by allowing the operator to pre and post bend the material. The R-H120 is considered a double pinch roll bender since the top roll is fixed and the two bottom rolls are on independent hydraulic cylinders to do the forming. The R-H120 double pinch metal ring roller from Baileigh Industrial has powerful industrial grade hydraulics that drives all three rolls on this roll bender. The R-H120 has lateral roll guides and guide rolls that are hydraulically driven to assist with coiling and twisting. The R-H120 has a heavy... Less
More

Gardner Bender B2000 Conduit...

Free Shipping
3 stores Gardner Bender B2000 Conduit Benders
More

Baileigh Angle Roller R-H55

$18,716.40
Elite Metal Tools Baileigh Angle Roller R-H55
Free Shipping
/baileigh-angle-roller/TYDBEcAcIMc5_qdaeZ5x7w==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Baileigh Industrial R-H55 angle roller is perfect for bending round tube and pipe, sections, bar, and angle iron into large sweeping radii. This machine uses three driven rolls that are powered by a 220 volt three phase 5hp motor via a direct drive transmission that offer enough power to roll 4 round tubing with a .083 wall thickness. In order to achieve capacity like this the R-H55 is built from a heavy steel plate that is mounted on a fully welded steel housing. Like all section benders from Baileigh Industrial, this one can be operated in the vertical mode for smaller diameters and laid on its back for horizontal bending when larger diameters are required. The R-H55 angle roller has industrial grade hydraulics for positioning the top roll. The top roll position is controlled by the... Less
More

Current Omni Pipe Bender 1/2...

$6,299.94
Ohio Power Tool Current Omni Pipe Bender 1/2 to 2 Bending 747
No Shipping Info
/current-omni-pipe-bender/3LfJgsmluSyw1Jzf09h8MQ==/info
Ohio Power Tool
IN_STOCK ( In stock )
Current Tools Omni Bender 747 Only two shoes needed to bend 1/2 to 2 Rigid, EMT and IMC conduit Optional shoe set bends 1/2 to 2 40 mil PVC coated Rigid conduit Proven electrical control system Adjustable bend angle limit switch for accurate repeat bends Tilts for horizontal bending in a tabletop position Quick squeeze adjustment for EMT and IMC conduit support rollers Fork pockets for easy lifting Lockable storage box for accessories Made in the USA
More

JET JHPB-20 2-in Manual...

Free Shipping
3 stores JET JHPB-20 2-in Manual Hydraulic Pipe Bender 331900 NEW
More

Tube Pipe Roller Bender...

$299.98
eBay Tube Pipe Roller Bender Bending Fabrication Mild Steel Cuprum Aluminum Etc.
Free Shipping
/tube-pipe-roller-bender/n8FSDXpShI-Z5avrUm5eSg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
New Document TUBE PIPE ROLLER Bender Bending Fabrication Mild Steel Cuprum Aluminum Etc. FREE SHIPPING Tube Pipe Roller Bender Can Process material of Mild Steel, Cuprum Aluminum, etc. Size of Material (mm) 20x20x1.2 20x20x1.5 20x20x1.75 25x25x1.2 25x25x1.5 25x25x1.75 30x30x1.5 30x30x1.75 30x30x20 40x40x1.5 40x40x1.75 Min. Radius R (mm) 180 170 200 220 Min. Diameter ф (mm) 450 500 550 600 Technical Parameter And Capacity Diameter of Upper Roller ф90 mm Thickness Of Upper Roller 50 mm Diameter
More

Hot Box Pvc Bender W/power...

$2,271.58
SharpTekSupply.com Hot Box Pvc Bender W/power Drive, 1ea - Gardner Bender Bhb-560p
+ $6.99 shipping
/hot-box-pvc-bender/1hZ1wUzU_yf4pzYgx9woeQ==/info
SharpTekSupply. com
IN_STOCK ( In stock )
Store not rated
Buying a quantity of 1, means buying 1 EAHot Box Pvc Bender W/Power Drive, 1EA - Gardner Bender BHB-560PAllows conduit to be reheated and reformedHighly polished reflector surfaces heat conduit quickly and evenlyLarge wheels provide job-site portabilityPower drive model automatically rotates conduit for faster bendsAmps: 24.00 AApplicable Materials: Conduit (Schedule 40-80)Height: 14 inIncludes: Power RotatorLength: 74 inVoltage: 230.00 VWatts: 5500.00 WWidth: 11 1/2 inWt.: 68 lb
More

Brutus Standard Power Puller,...

$8,503.32
SharpTekSupply.com Brutus Standard Power Puller, 1ea - Gardner Bender Cp8000
+ $6.99 shipping
/brutus-standard-power/RlxS9NZwUdsG_WOXWSCVnQ==/info
SharpTekSupply. com
IN_STOCK ( In stock )
Store not rated
Buying a quantity of 1, means buying 1 EABrutus Standard Power Puller, 1EA - Gardner Bender CP8000Capstan is non-reversing with back stop brake, will not reverse when power is shut offExclusive planetary gear design lets power head deliver smooth, sure power without breakageFrame assembles in numerous configurationsTwo -way power head mounting adapts to tight cornersVersatile frame mounts power head almost anywherealerts operator to hung-up cable or other excessive conditionsLoad read-out meter indicates pulling load at all timesAmps: 15.00 A [Min], 30.00 A [Max]Includes: (3) 10 in. Lock Pins, (3) 12 in. Sheave, (3) 2 ft. Chain Assemblies, (5) 8 in. Lock Pins, 12 in. Cable Sheave w/Hook, 3, 3-1/2, 4 in. Conduit Couplings, 6 in. Lock Pin, Adjustable Pipe Adapter, Base Mounting Bracket,... Less
More

JET 331910 3 in. Manual...

$729.00
CPO Outlets JET 331910 3 in. Manual Hydraulic Pipe Bender
Free Shipping
/jet-331910-3-in-manual/7e7UIcoB2Xu5lQsO1izNJA==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
3 in. Manual Hydraulic Pipe Bender - 331910. Simple manual operation for ease of use. Eight bending dies included standard (1/2 in, 3/4 in, 1 in, 1-1/4 in, 1-1/2 in, 2 in, 2-1/2 in, 3 in.). Rotating stand locks in three positions for stability and versatility. Heavy-duty hydraulic cylinder capable of bending schedule 40 pipe. Completely manual so external power is not needed
More

Metalpro Pipe Bender MP9000

$1,925.00
Elite Metal Tools Metalpro Pipe Bender MP9000
Free Shipping
/metalpro-pipe-bender/DgZNtVoEEKC6IGHh1LoKYg==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
The METALpro MP9000 Pipe Bender easily handles a wide variety of professional, farm, and industrial production jobs...all day long! Using different dies, the MP9000 can bend pipe from 1/2'' to 2'' and heavy wall conduit and tubing from 1/2'' to 2''. CALL FOR AVAILABLE DIE'S & PRICING: 281-241-9504Use the MP9000 Pipe Bender for:Railing constructionFarm and ranch gatesTrailer manufacturingTubu lar storage structuresreBar bending for landscape and concrete workMetalworking education in high schools and vocational schoolsBenefits of the MP9000 include:Lower cost alternative to other pipe bendersWide range of bending applications, e.g., schedule 40 and schedule 80 pipe, rigid conduit, heavy wall tubing, and round bar stockWorks in any shop - plugs into any 110 V, 20 amp outlet. Specifications... Less
More

Hot Box Pvc Bender .5-4, 1ea...

$1,246.73
SharpTekSupply.com Hot Box Pvc Bender .5-4, 1ea - Gardner Bender Bhb-540a
+ $6.99 shipping
/hot-box-pvc-bender-54/j-YjYTjhbf5RDQ1QtV4q-w==/info
SharpTekSupply. com
IN_STOCK ( In stock )
Store not rated
Buying a quantity of 1, means buying 1 EAHot Box Pvc Bender .5-4, 1EA - Gardner Bender BHB-540AAllows conduit to be reheated and reformedHighly polished reflector surfaces heat conduit quickly and evenlyLarge wheels provide job-site portabilityAmps: 20.00 AApplicable Materials: Conduit (Schedule 40-80)Height: 11 1/2 inLength: 54 1/2 inVoltage: 115.00 V, 120.00 VWatts: 2400.00 WWidth: 8 1/2 inWt.: 34 lb
More

Ridgid Tube Bender

$149.99
Overstock.com Ridgid Tube Bender
Free Shipping
/ridgid-tube-bender/3QMizydlqJxQFXOsbzZLPQ==/info
Overstock.com
IN_STOCK ( In stock )
Free Shipping
This ridgid tube bender has the bend radius of 1.5 inches and a copper and stainless steel hardware. Tube O.D.: 0.5 inch Bend radius: 1.5 inches Materials: Copper, stainless steel, steel Weight: 5.40 pounds
More

JET 3 in. Manual Hydraulic...

$729.00
CPO Jet JET 3 in. Manual Hydraulic Pipe Bender 331910
Free Shipping
/jet-3-in-manual/hUzLZVB6N2qOKpm4t-ozfA==/info
CPO Jet
IN_STOCK ( In stock )
Store not rated
Free Shipping
3 in. Manual Hydraulic Pipe Bender - 331910. Simple manual operation for ease of use. Eight bending dies included standard (1/2 in, 3/4 in, 1 in, 1-1/4 in, 1-1/2 in, 2 in, 2-1/2 in, 3 in.). Rotating stand locks in three positions for stability and versatility. Heavy-duty hydraulic cylinder capable of bending schedule 40 pipe. Completely manual so external power is not needed
More

JET 331910 3 in. Manual...

$729.00
Tyler Tool JET 331910 3 in. Manual Hydraulic Pipe Bender
Free Shipping
/jet-331910-3-in-manual/K90EAD2WTyh5l8Cs6R5qqg==/info
Tyler Tool
IN_STOCK ( In stock )
Free Shipping
3 in. Manual Hydraulic Pipe Bender - 331910. Simple manual operation for ease of use. Eight bending dies included standard (1/2 in, 3/4 in, 1 in, 1-1/4 in, 1-1/2 in, 2 in, 2-1/2 in, 3 in.). Rotating stand locks in three positions for stability and versatility. Heavy-duty hydraulic cylinder capable of bending schedule 40 pipe. Completely manual so external power is not needed
More

JET 331900 2 in. Manual...

$429.00
CPO Outlets JET 331900 2 in. Manual Hydraulic Pipe Bender
Free Shipping
/jet-331900-2-in-manual/Zhtd4E1GM81CBiHZBcqbEQ==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
2 in. Manual Hydraulic Pipe Bender - 331900. 1/2-in, 3/4 in, 1 in, 1-1/4 in, 1-1/2-in,2 in. bending dies. Simple manual operation for ease of use. Rotating stand locks in three positions for stability and versatility. Heavy-duty hydraulic cylinder capable of bending schedule 40 pipe. Completely manual so external power is not needed
More

Heavy Duty Metal Bender

$124.99
Eastwood.com Heavy Duty Metal Bender
+ $23.57 shipping
/heavy-duty-metal-bender/eA33AaSt2pu-tyKo_G72dg==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Heavy-duty bending jobs demand a Heavy-Duty Metal Bender like this Use this powerful metal bender to form bumper and fender brackets, ornamental ironwork, and more. Telescoping handle for added leverage 7 dies 1 right-angle die
More

Hydraulic Eegor Bender Table...

$2,476.37
SharpTekSupply.com Hydraulic Eegor Bender Table Complete, 1ea - Gardner Bender Be400
+ $6.99 shipping
/hydraulic-eegor-bender/KcR7FLhnghVVygCNiuhuEg==/info
SharpTekSupply. com
IN_STOCK ( In stock )
Store not rated
Buying a quantity of 1, means buying 1 EAHydraulic Eegor Bender Table Complete, 1EA - Gardner Bender BE400Hydraulic pivot jack adjusts table to horizontal or vertical positions for easy accessRugged one-piece steel frame with 1/4 steel plate tabletopTwo ton jack forceHeight: 56 inIncludes: 6 in. Wheels, Lift- HandlesLength: 32 inUsed With: Eegor Conduit BendersWidth: 30 inWt.: 210 lb
More

Tubing Tube Pipe Roller...

$499.00
eBay Tubing Tube Pipe Roller Rolling Bender Bending Fabrication Ring W/ Stand 1-1/2
Free Shipping
/tubing-tube-pipe-roller/sRgewPNB24TJF_ceiOXTrw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
New Page 1 Better Values Friendly Service Fast Shipping BRAND NEW Tube Roller With Stand Unit overall dim: 30 x 24 x 44 Roller Size: 1-1/2 Ø 38.1, 350 Min Ø Wall Thickness 2mm less feeding amount to make sure the roundness of tube Quantity: 1 Shipping FREE SHIPPING in lower 48 States. Additional charge applies to APO, AK, HI, GU, PR, and VI addresses. Please contact seller for additional information. All items will be shipped Ground Service Payments Paypal payment only please. Buyer can u
More

Gardner Bender 225 Count 1/2...

$3.00
Rock Bottom Deals Gardner Bender 225 Count 1/2 Inch Plastic Cable Staples
No Shipping Info
/gardner-bender-225-count/t_BDEysZl9gmquDGlFszjw==/info
Rock Bottom Deals
IN_STOCK ( In stock )
Store not rated
Gardner Bender 225 Count - Inch Plastic Cable Staples. 225 Pack, 1/2 inch Plastic Romex Cable Staple, For 14/2 Or 12/2 Non-Metallic Or Underground Feeder Cable, Plastic Job Jar. Secures 14/2, 12/2, 10/2 NM cable. Made in USA. Reusable Jar. UL Listed. Item number: PS-225J. Case pack: 6 jars.
More

GB Gardner Bender Household...

$49.99
Sears GB Gardner Bender Household Tester Kit
+ $6.95 shipping
/gb-gardner-bender/yrNL0TprV_NKdussU5rwZg==/info
Sears
IN_STOCK ( In stock )
Test all wiring applications in the home or office. Includes 4 high quality test products, the GVD-3504A non-contact circuit alert to test AC voltage presence, GFI-3501A ground fault receptacle tester to test correct wiring of outlets, GTT-3200 dual telephone line tester to check for proper wiring of telephone jacks and the GDT-311 5-function, 11-range digital multimeter with test leads to test AC and DC voltage, DC current, resistance, and continuity. Comes with a durable plastic case with a foam insert to protect and hold products in place. Includes 4 Testers Case
More

CNC Roll Bender R-CNC120

$68,496.00
Elite Metal Tools CNC Roll Bender R-CNC120
Free Shipping
/cnc-roll-bender-rcnc120/eRmps69VpK3c5xQBBkscAA==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
With bending capabilities far beyond the norm, this CNC roll bender is Ideal for structural applications, playground manufactures, shipyard builders, etc that want high production with minimal waste.   The R-CNC120 computer controlled roll bender from Baileigh Industrial can bend up to 4.75 tube and has the ability to bend multiple radii on a single section.  Working together with a hand held calibration device and cutting edge CNC technology the R-CNC120 is capable of automatically producing a desired radius on its own.  Unlike other CNC roll benders, the integrated software on the Baileigh Industrial line of CNC profile benders is extremely intuitive and easy to operate and program.  The programming of the R-CNC120 is done through the use of its touch screen operator pedestal. The top... Less
More

Imperial Stride 364-FHA-06...

$50.99
homelectrical Imperial Stride 364-FHA-06 3/8'' FHA Lever Type Tube Bender
No Shipping Info
/imperial-stride/tyKrty4npdy5VDDa8EvfeQ==/info
homelectrical
IN_STOCK ( In stock )
Store not rated
This tube bender has open side which slips over the tube at any point. This makes a smooth tight radius that bends to 180 degrees with minimum effort. This tube bender also creates no scoring or flattening of tubing. This tool is calibrated to show angle of the bend.This tool also features a wide hook grip that grips the tubing securely. . Tube O.D.:3/8 in. Radius: 15/16 in. Applicable Materials: Soft Copper, Aluminum, Brass, Steel, Stainless Steel. Wt.: 1 3/4 lb. (Imperial Stride 364-FHA-06)
More

1/4 Tp 3/4 Worm-gear Tube...

$1,912.15
SharpTekSupply.com 1/4 Tp 3/4 Worm-gear Tube Bender, 1kit - Imperial Stride Tool 600-f
+ $6.99 shipping
/14-tp-34-wormgear-tube/-oNsmG1PARKguzT0xBllmw==/info
SharpTekSupply. com
IN_STOCK ( In stock )
Store not rated
Buying a quantity of 1, means buying 1 KIT1/4 Tp 3/4 Worm-Gear Tube Bender, 1Kit - Imperial Stride Tool 600-FAdjustable pressure roller positions quickly in index holesEnclosed gearsFollow bar eliminates drawing action and keeps tube in virtually perfect roundWorm gear type and crank with revolving hand gripApplicable Materials: Aluminum, Brass, Stainless Steel, Steel, TitaniumCross Section Shape: RoundWt.: 35 lb
More

Eastwood Pro Former Tubing...

$439.99
Eastwood.com Eastwood Pro Former Tubing Bender
+ $42.70 shipping
/eastwood-pro-former/mChmUH2K9bP1S1-PheIXXA==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Our ProFormer Tubing bender lets you bend steel and chrome- molybdenum (chromoly) tubing in diameters from 0.75'' to 1.75''. Ridged steel frame construction, 8 ton forming jack offer a sturdy, reliable base that will not move across the bench when in use. Our steel forming dies and cast followers offer accurate bends without flattening or deforming the edges. Great for small shops wanting to build custom tube cross members, transmission mounts and other tube components. Kit includes dies for 0.75'', 1.0'', 1.5'', 1.625'' and 1.75'' diameter tubing along with complete instruction manual.
More

Baileigh HMB-1125 Mandrel...

$8,495.75
Elite Metal Tools Baileigh HMB-1125 Mandrel Tube Bender (HMB1125)
Free Shipping
/baileigh-hmb1125-mandrel/l4ZFr08GqPUGxvvsOqEzhw==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
The HMB-1125 from Baileigh Industrial is an exciting new manual mandrel benderthat was designed to help produce tight bends in thin wall tubing without the space issues and expense of a full blown automatic mandrel bender.  This unique machine uses a one way bearing and gear reduction setup to help produce enough power to bend up to 1-1/8 OD mild steel.  For accurate and consistent bends a digital readout is also standard to keep track of the bend degree.Perfect for the furniture maker, this mandrel bender comes with a 48 mandrel rod and has the ability to bend to 180 degrees. This unique machine will have a place in just about any shop. SpecificationsBen d Ratio5: 01Capacity Round OD (Mild Steel)1.125 x .065Capacity Round OD (Stainless Steel)1.0 x .065Bend Direction CW Max. Bend... Less
More

Imperial Triple-Head Tube...

$42.74
Sears Imperial Triple-Head Tube Bender with Roto-Lok Indexing Handle
+ $6.50 shipping
/imperial-triplehead-tube/hsBmcU8GOGwOHukHaW5AHw==/info
Sears
IN_STOCK ( In stock )
This Tube Bender from Imperial bends 3/16, 1/4, 5/16 and 3/8 in. O.D. tubing. Its patented, quick-action indexing lever repositions the two-stage handle midway through the bend when both handles begin to meet; this feature allows easy fabrication of bends up to 180 deg. with reduced effort, better control and no crossing of handles. Made of lightweight, die-cast aluminum.
More

Superior Tool 4Pc. Spring...

$11.39
Sears Superior Tool 4Pc. Spring Tube Bender Set
+ $6.50 shipping
/superior-tool-4pc-spring/EBo1-Ar_NEgoFg39w0YtBg==/info
Sears
IN_STOCK ( In stock )
Slide the flared end over tubing, covering area to be bent. Applying pressure equally to each side of tube, bend tube slightly beyond desired angle, then back to desired angle. To remove spring, turn spring counterclockwise in direction of flared end and spring will slide off tube.4 sizes: 1/4, 3/8, 1/2, and 5/8.
More

Superior Tool 1/2 Spring Type...

$2.99
Sears Superior Tool 1/2 Spring Type Tube Bender
+ $5.99 shipping
/superior-tool-12-spring/KN0BYSw2bm1tSwO6VcKhOA==/info
Sears
IN_STOCK ( In stock )
Slide the flared end over tubing, covering area to be bent. Applying pressure equally to each side of tube, bend tube slightly beyond desired angle, then back to desired angle. To remove spring, turn spring counterclockwise in direction of flared end and spring will slide off tube.
More

Superior Tool 1/4 Spring Type...

$1.99
Sears Superior Tool 1/4 Spring Type Tube Bender
+ $5.99 shipping
/superior-tool-14-spring/NcnnMpmiT3iT3XfflCDo4w==/info
Sears
IN_STOCK ( In stock )
Slide the flared end over tubing, covering area to be bent. Applying pressure equally to each side of tube, bend tube slightly beyond desired angle, then back to desired angle. To remove spring, turn spring counterclockwise in direction of flared end and spring will slide off tube.
More

Superior Tool 3/8 Spring Type...

$2.99
Sears Superior Tool 3/8 Spring Type Tube Bender
+ $5.99 shipping
/superior-tool-38-spring/XzTM7rAJNPY3S3svr3zutg==/info
Sears
IN_STOCK ( In stock )
Slide the flared end over tubing, covering area to be bent. Applying pressure equally to each side of tube, bend tube slightly beyond desired angle, then back to desired angle. To remove spring, turn spring counterclockwise in direction of flared end and spring will slide off tube.
More

Superior Tool 5/8 Spring Type...

$3.99
Sears Superior Tool 5/8 Spring Type Tube Bender
+ $5.99 shipping
/superior-tool-58-spring/ryjIWpUjd3wcBF_TKBzv_A==/info
Sears
IN_STOCK ( In stock )
Slide the flared end over tubing, covering area to be bent. Applying pressure equally to each side of tube, bend tube slightly beyond desired angle, then back to desired angle. To remove spring, turn spring counterclockwise in direction of flared end and spring will slide off tube.
More

Imperial 364FH03 Bender,...

$39.81
Opentip Imperial 364FH03 Bender, Lever 3/16 Tube
+ $4.99 shipping
/imperial-364fh03-bender/6XLynk4zJzk5Cd9z02s4ew==/info
Opentip
IN_STOCK ( In stock )
Manufacturer Part Number: 364FH03Bender, Lever 3/16 TubeSales Unit: EACHPricing Unit: EACHCountry of Origin: US
More

Gardner Bender 10 Pack...

$4.50
Rock Bottom Deals Gardner Bender 10 Pack Bi-Metal Hacksaw Blades
No Shipping Info
/gardner-bender-10-pack/2TByUQw9TUF-caCVZTCI-w==/info
Rock Bottom Deals
IN_STOCK ( In stock )
Store not rated
Gardner Bender 10 Pack Bi-Metal Hacksaw Blades. Made in the USA. HCB-1232. 12 Inch, 32 tpi. Super sharp high-speed steel cutting edge electron beam welded to a flexible alloy back for straight cuts and long life. Case pack: 10.
More

Imperial Stride 364-FHA-08...

$91.89
homelectrical Imperial Stride 364-FHA-08 1/2'' OD Tube Bender
No Shipping Info
/imperial-stride/NNW40XwsAWEzYiQk8_yOlw==/info
homelectrical
IN_STOCK ( In stock )
Store not rated
This tube bender features an open side type which slips over the tube at any point. This tool make smooth tight radius and bends up to 180 degrees with minimum effort. This tool does not require or flattening of tubing. This tube bender also has wide hook grups that secure the tubing safely. . Tube O.D.:1/2 in. Radius:1 1/2 in. Applicable Materials:Soft Copper, Aluminum, Brass, Steel, Stainless Steel. (Imperial Stride 364-FHA-08)
More

GARDNER BENDER INC 8-oz. Tube...

$10.64
Walmart.com GARDNER BENDER INC 8-oz. Tube Ox-Gard Anti-Oxidant Compound
Free Shipping
/gardner-bender-inc-8oz/B-qfrFt3fouVVzEFHgAkOg==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
8 OZ Squeeze Tube Ox-Gard Anti-Oxidant Compound, For Application To All Aluminum Wire Leads To Prevent Oxidation & Shorting, Also Prevents Corosion Of Aluminum Conduit Joints.
More

Baileigh RDB-150 Rotary Draw...

$5,975.00
Elite Metal Tools Baileigh RDB-150 Rotary Draw Bender (RDB150)
Free Shipping
/baileigh-rdb150-rotary/ootAAOgXA9Dc0aHO6p3lJg==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
The RDB-150 tube bender from Baileigh Industrial broke new ground in 2002 when it became the first hydraulic tube bender to consistently and accurately bend tube and pipe to 180 degrees in one shot.  Since then we now have thousands in the field working as well today as they did the day they were made.  The RDB-150 is the perfect bender for small to medium fabrication shops looking to save time and money.The RDB-150 uses a low pressure industrial grade hydraulic system that operated on 110 volts.  This industrial grade system allows the RDB-150 to bend 2 Schedule 40 pipe and up to 2-1/2 tubing with a wall thickness of .120 mild steel.  The RDB-150 has an 8 centerline radius maximum, depending on the outside diameter of the material being bent.  The RDB-150 accepts all Baileigh Industrial... Less
More

Current Tools 705 Offset...

$218.06
Toolup.com Current Tools 705 Offset Bender 1/2 Emt, electricians- tools
Free Shipping
/current-tools-705-offset/RRquJ2UqsCrKIxRU85bXbA==/info
Toolup.com
IN_STOCK ( In stock )
Free Shipping
SPECIFICATIONS:• Made in the USA. • Two Year Warranty 1/2 EMT Offset Bender ideal for making consistent offset bends on EMT conduit for wall mounted boxes.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355