tools valves vw

Hydraulic Directional Valve, Solenoid Operated, Cetop-03 Size, Number Of Ways 4, Number Of Positions 3, Open Spool Type, Coil Volts 12 Dc, Gpm @ 3000 Psi 20, Max Pressure 5000 Psi, Max Tank Pressure 3000 Psi, Nitrile O-ring Seal Type, Manual Override, Length 9.2 In, Width 1.81 In, Height 1.97 In, Iso 4401, Nfpa D07 Standards

Hydraulic Directional Valve, Solenoid Operated, Cetop-03 Size, Number Of Ways 4, Number Of Positions 3, Tandem Spool Type, Coil Volts 24 Dc, Gpm @ 3000 Psi 13.3, Max Pressure 5000 Psi, Max Tank Pressure 3000 Psi, Nitrile O-ring Seal Type, Manual Override, Length 9.2 In, Width 1.81 In, Height 1.97 In, Iso 4401, Nfpa D14 Standards

Solenoid Valve, Pilot Operated, Number of Ways 2, Cv Flow Factor 28, 11/2 NPT Pipe Size (In.), PSI Differential Min. 5, Safe Working Water PSI 140, 180 Degrees Max. Fluid Temp. (F), Body Material Natural PolyPro, Gasket Material Viton, Length 6.0 In., Width 6.0 In., Height 9.531 In.

Solenoid Valve, Pilot Operated, Number of Ways 2, Cv Flow Factor 80, 3 NPT Pipe Size (In.), PSI Differential Min. 5, Safe Working Water PSI 140, 140 Degrees Max. Fluid Temp. (F), Body Material PVC, Gasket Material Viton, Length 9.0 In., Width 9.0 In., Height 11.875 In.

Solenoid Valve, Pilot Operated, Number of Ways 2, Cv Flow Factor 35, 2 NPT Pipe Size (In.), PSI Differential Min. 5, Safe Working Water PSI 140, 180 Degrees Max. Fluid Temp. (F), Body Material Natural PolyPro, Gasket Material Viton, Length 7.0 In., Width 7.0 In., Height 9.531 In.

2 Cam Lock Clamps Used for locking camshafts when setting valve timing. Camshaft locking clamp used for setting timing. Applicable to: Audi: 3.2L V6 4v (BKH), 4.2L V8 4v (BAR, BNS, BVJ, BYH and CAUA) and 5.2L V10 4v (BXA and BSM) VW: 2.5L I5 (BGP, BGQ, BPR, BPS, CBTA and CBUA)

Also known as: ATD-5217, ATD5217; 120 lb (16 gallon/54.4kg) Drum Grease Pump Assembly Additional Information: Includes 50:1 Double Acting High Pressure Pump(ATD5217-1) provides uniform pressure and delivery on the up and down stroke 6’(1.85mts) High Pressure Grease Delivery Hose(ATD5361) High Pressure Grease Delivery Control Valve(ATD5218) Rapid Disconnect Coupler(815ME) & Air Nipple (11660ME) Pump Specifications: Pump Tube Length 27-3/8 (69.5cm) made for 120 lb Drum & 1.0 (2.54cm) diameter Air Motor Height: 11.0 (27.9cm) Overall Height: 38-3/8(97.47cm) Follower Plate (with outer rubber wiping ring on the drum and inner rubber wiping ring on the pump tube) DIA 1.0 (ATD5325) assures postitive prime and vacuum at low temps (prevents cavitation) Air Motor Cover in White (91407ME) &... Less

Ridgid Easy to use. At only 21, this lightweight and compact tool is great for tight quarters. Heavy-Duty Design. Sturdy machined, corrosion- resistant materials for dependable lifelong benefits. Built-in bleed valve. Allows for easy purge of chips. Independent cutter feed gives the operator total independent control of the cutter feed rotation for optimal saw life. Taps a variety of materials. The RT 3422 is capable of tapping into steel, cast iron, ductile iron, and plastic pipe. Versatility. The RT3422 is capable of tapping mains of water up to 500 psig and steam, air or natural gas up to 150 psig. Coupon retaining bits. Exclusive pilot bits give you the confidence that the coupon will not be dropped in the pipe, preventing medium contamination or possible... Less

Assenmacher Specialty Tools # 3243 VW And Audi Camshaft Alignment tool 2.8L V6 Engine with 2 Valves per Cylinder. Used in conjunction with #3242 Locking Pin. Made In USA