26" Powder Coated 6-Drawer Tool Chest

INCLUDES: EK425L Crimping Tool CJD30 Crimping Jaw 18V 3.0 Ah Li-ion 120V Battery Charger Carrying CaseFEATURES: 6 Tons of Crimping Force Slim light weight profile ideal for one handed operation. Pressure sensor alerts the user to if the force is below desired level. Jaws open automatically when crimping is complete. Interchangable crimping and cutting jaw compatibility. LED Light. Will complete 325 crimps per battery charge. SPECIFICATIONS: Length: 18.5" Width: 4" Crimping Force: 6 Tons Est. Cycles Per Charge: ~325 Crimp Cycle Time: ~4 seconds Battery Charge Time: 30 mins.With the new 6-ton Greenlee Utility EK425L tools Greenlee has taken the best in class EK425 and packed it with additional exclusive features to make the crimping task faster and easier while providing assurance that... Less

Also known as: OTC-5057, OTC5057; Removing corroded clevis pins from a brake air-chamber pushrod can be a maddening and time-consuming task unless youre using our clevis pin press. This handy screwoperated tool applies the force just where its needed. The pin is easily removed from its hole without damaging nearby components.

You Are Bidding On:Brand New Retail Pack:TASK FORCE® 22 PC. Tool Set:Most Frequently Used Tools (Red Black as pictured,Item # 0030973,Model # 54743 )Package Included:Utility Knife 12 oz. Fiberglass Hammer 6 in. Long Nose Pliers 7-in-1 Screwdriver 16 ft. Tape Measure 9 in. Torpedo level 8 Pc. SAE hex key 8 Pc. Metric hex key (((((º All my items are legally purchased with traceability and come from a smoke free / pet free home *}} "SHOCK and AWE" FREE USPS Priority Mail (USA only)(There are end

MPN #CEN6459. Central Tools Brake Force Rotor Gauge. Most Brake Hardware products are available for in-store pickup from Advance Auto Parts.

NEW!! TASK FORCE 6 PC HOME TOOLS SET -GENERAL PURPOSE SELECTION OF THE MOST FREQUENTLY USED TOOLS -SET INCLUDES UTILITY KNIFE WITH 3 BLADES 13 OZ CLAW HAMMER 12 FT TAPER MEASURE 6" LONG NEEDLE NOSE PLIERS 9" TORPEDO LEVEL 56 PC FASTENER ASSORTMENT

Pneumatic Rivet Tool, Industrial Duty, Blind Rivet Dia (in) 3/16, 7/32, 1/4 And 5/16 Stainless Steel, Steel And Aluminum, Pulling Force 4500 Lb, Stroke 0.984 In, 0.98 Cfm Per Stroke, Fnpt Inlet 3/8-28 In, Min Hose Size 3/8 In, Max Pressure 90 Psi, Composite Construction, Polymer Seal, Dia 5.1 In, Height 13 In, Length 13.4 In, Includes 4 Nosepieces 3/16, 7/32, 1/4 And 5/16, Three Spanners, Oil Can

The Mark-10 Force Gauge Series 5 advanced digital force gauges are designed for tension and compression force testing in a wide variety of applications across virtually every industry. The Series 5 Force Gauges feature an industry-leading sampling rate of 7,000 Hz, producing accurate results even for quick-action tests. Accuracy is ½0.1% of full scale ½1 digit, and resolution is 1/5000. The back lit LCD displays graphics in large, legible characters, while the simple menu navigation allows for quick access to the gauges½ many features and customizable parameters. Also, data can be quickly transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs for added convenience. Scroll down to take a look at all the features and benefits of the Mark-10... Less

Includes: 12 oz. fiberglass claw hammer, 9 inch torpedo level, 9 mm snap-off knife, 1 heavy duty scissors, 6 inch slip joint pliers, 16 ft tape measure, 6-in-1 screwdriver, 2 piece precision screwdrivers and assortment fasteners.

5-Ton Electric Log Splitter

Also known as: CEN-6459, CEN6459; Features and Benefits: Pointed anvils measure scored and non-scored surfaces Built-in depth rod to check brake pad and shoe wear Deep measuring arms 3.25" Fractional graduations: 0.001" Metric: 0.01mm This allows you to measure all brake rotors.  It has digital accuracy, which gives both inch and metric.  This comes packaged in a plastic blow-molded case for easy and safe storage.

Pneumatic Rivet Tool, General Duty, Blind Rivet Dia (in) 1/8, 5/32 And 3/16 Stainless Steel, Steel And Aluminum, Pulling Force 1983 Lb, Stroke 0.551 In, 0.63 Cfm Per Stroke, Fnpt Inlet 1/4 In, Min Hose Size 3/8 In, Max Pressure 90 Psi, Cast Aluminum Construction, Polymer Seal, Dia 2.91 In, Height 11.7 In, Length 8.9 In, Includes 3 Nosepieces 1/8, 5/32 And 3/16, Spanner

Extra heavy-duty, 25-ton forcing screw, adjustable-reach gear puller removes gears, pulleys and collars from shafts. Single, Pair, or Set: Single, Pulling Power (lbs.): 25 ton, Common U...

Task Force 5 Piece Metric Combination Wrench Set Features: A drop forged carbon steel construction Includes a storage hook Wrench set includes the following sizes:8 mm 10 mm 12 mm 14 mm 17 mm Brand New. Never been used. TERMS: Shipping Handling Fee · FREE domestic shipping. · We usually ship within 1-2 business days after receiving cleared payment. · We offer combine shipping · Expedited shipping is available on most items. · Tracking number will be provide so you may track the package alo

Pneumatic Rivet Tool, Industrial Duty, Blind Rivet Dia (in) 3/16, 7/32 And 1/4 Stainless Steel, Steel And Aluminum, Pulling Force 3800 Lb, Stroke 0.984 In, 0.98 Cfm Per Stroke, Fnpt Inlet 3/8-28 In, Min Hose Size 3/8 In, Max Pressure 90 Psi, Composite Construction, Polymer Seal, Dia 4.3 In, Height 13 In, Length 13.4 In, Includes 3 Nosepieces 3/16, 7/32 And 1/4, Three Spanners, Oil Can

With this Brand New Upgraded Drywall Lift, the operating procedure of a 4' x 16' sheet just is not a problem for yourself any more! This creates greater balance, better control, more stability and less fatigue. It surely meets your demands. No problem to accomplish the tedious task! Just do it yourself !!! What we offer is guaranteed with top grade quality ever. Thus, it is perfect for commercial application just like rental business besides home use! Please go ahead to speed up your dry walling project!! 4" rolling casters are upgraded to 4 3/4" lockable ones to prevent from sliding when you are operating the lift, surely adding more safety!!! Features:One person operationDurable welded steel construction with powder coating11' maximum reach for horizontal ceilings15' for walls... Less

Pneumatic Rivet Tool, General Duty, Blind Rivet Dia (in) 3/32, 1/8, 5/32 And 3/16 Stainless Steel, Steel And Aluminum, Pulling Force 1940 Lb, Stroke 0.551 In, 0.55 Cfm Per Stroke, Fnpt Inlet 1/4 In, Min Hose Size 3/8 In, Max Pressure 90 Psi, Cast Aluminum Construction, Polymer Seal, Dia 3.14 In, Height 10.7 In, Length 9.1 In, Includes 4 Nosepieces. 3/32, 1/8, 5/32, And 3/16, Spanner

Fan Forced Commercial Wall Heater, 6,000W at 240V - Ideal for offices, stores, schools, churches, hospitals, dormitories, airport terminals, reception rooms, entrance lobbies, corridors and stairwells. Unit installs easily in either new or remodeled buildings. Features steel finned metal sheath electric heating elements with low sheath temperatures provided uniform heat and long service life. Rugged stamped steel front cover provides a down-flow air pattern and is attractively finished in Northern White. Integral thermostat for quick installation separate thermostat not necessary. Thermal overheat protectors disconnect power in event of overheating due to accidental blockage. Built-in power disconnect switch for added safety during maintenance. Permanently lubricated, totally enclosed... Less

Fan Forced Commercial Wall Heater, 8,000W at 600V - Ideal for offices, stores, schools, churches, hospitals, dormitories, airport terminals, reception rooms, entrance lobbies, corridors and stairwells. Unit installs easily in either new or remodeled buildings. Features steel finned metal sheath electric heating elements with low sheath temperatures provided uniform heat and long service life. Rugged stamped steel front cover provides a down-flow air pattern and is attractively finished in Northern White. Integral thermostat for quick installation separate thermostat not necessary. Thermal overheat protectors disconnect power in event of overheating due to accidental blockage. Built-in power disconnect switch for added safety during maintenance. Permanently lubricated, totally enclosed... Less

The CRL Precision Cut Opening Kit is the newest of products for making the most difficult cuts in glass up to 3/8 inch (10 millimeters) an easy task. Now 90 degree corners and three-sided lateral cutouts can be made effortlessly. The pressure applied with the precision cut opener (included) is unlike any glass plier on the market because the force to run your cut comes from the gradual turning of the fine threaded adjustment screw on the bottom of the unit. This means there are no sudden movements to accidentally break your glass. A run can be controlled millimeter by millimeter to ensure a precise break every time. The pressure ring in the center of the of the tool can be rotated 360° for easy access to the most extreme position of any cut. Maximum reach of this tool is 100 millimeters... Less

Features and Benefits Unique beam design allows you to apply force to the flat of the wrench which reduces hand fatigue and increases surface contact by over 500%. Up to 25% longer beam to access those hard to reach fasteners Surface Drive Plus provides stronger grip on fasteners and delivers up to 25% more torque Surface Drive on ratcheting box end improves box end strength and reduces fastener rounding First tool recognized by the Arthritis Institute to significantly reduce the risk of carpal tunnel.This 12 piece Metric X-Beam Ratcheting Combination Wrench Set. Includes: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and 19mm. Unique beam design allows you to apply force to the flat of the wrench which reduces hand fatigue and increases surface contact by over 500%. Up... Less

Milwaukee Electric Tool's M18™ Cordless Caulk and Adhesive Gun delivers incredible pushing force for tough applications and the highest level of bead control available in any cordless tool. Features: 950 lbs of Dispensing Force, Variable Speed Trigger, Constant Flow Technology, Anti-Drip Mechanism, Rotating Quick-Change Collar - Accepts all Milwaukee® quick change configurations: 10oz carriage, quart-size carriage, and 20oz sausage style barrels; 6-Setting Max Speed Dial - Optimize flow rate from 0-21 IPM (inches per minute) based on application; Specifications: 18V, No Load Speed 0-21 IPM (inches per minute), Carriage for use with 10 oz Cartridges, Force 950 lbs, Variable Speed Trigger, 6-Setting Maximum Speed Dial, Uses M18™ Compact REDLITHIUM Battery (not included),... Less

The U.S. Army tasked Pelican with building a mobile tool chest to house tools for its maintenance engineers. Rapid deployment to harsh environments is common; arriving with your tools intact and fully functional is mission critical. Over a two year period of intensive design, research and testing, Pelican Products built the world's toughest mobile tool chest for use by the U.S. Armed Services. Over 70 tests were required, including water submersion, extreme temperature tests and drop tests from five feet fully loaded. The 0450 passed all of them. The 0450 Mobile Tool Chest: now ready for civilian use. For the 0450 Mobile Tool Chest Brochure Click Here Watch A Mobile Tool Chest Product Demo

185-Piece Tool Set

Also known as: SIRST9020; Features and Benefits Rotates Left or Right in order to Wind-Back Pistons allowing serious time savings with less effort Straight shot, down the center continuous force. The pressing shaft of this air-gun is acting on a force of 1:1 from the air-compressor. Solid cast aluminum body is durable, light weight and anodized. All pieces are securely housed in a blow molded case. The Air-Gun incorporates a single piston press shaft, which is a non impact type action. Magnetic pad attachment base securely holds press pads - mates up to most competitors padsAir-Gun equipped with an adaptor allowing the technician to use own pads. The Air-Gun incorporates a single piston press shaft, which is a non impact type action. Finger controlled press speed. Magnetic pad attachment... Less

DeVilbiss174 Set has 3 spray guns to handle everything from custom graphics and touch-up tasks to full repaintsThese 3 precision spray guns from DeVilbiss174 are the tools you'll need to take on any automotive paint job, from graphics and touch-up tasks to full repaints.2 large HVLP Guns1 small Detail Gun3 Tips, 3 Cups, Regulator and Tool KitDevilbiss 3-Gun Kit use for complete paint jobs, partial paint jobs and deatil work. For use with solvent borne paints- waterbased paints may corrode internal compnents if not cleaned properlyTake on any automotive painting job with this 3-gun DeVilbiss174 Kit that includes one large HVLP Gun for primers (with 1.8mm fluid tip) one large HVLP Gun for top coats (1.3mm fluid tip), and one Small Gun for detailing and custom graphics (with 1.0mm fluid... Less