Tools And Accessories Home and Garden - Shopping.com
Showing results for "tools and accessories"
Results 1 - 40 of 955

Performance Tool S-4

$138.44
Autoplicity Performance Tool S-4
+ $10.13 shipping
/performance-tool-s4/qzdHWR20Gu-5RXEJNn-nRA==/info
Autoplicity
IN_STOCK ( In stock )
Store not rated
Performance Tool S-4 4pc Super Jumbo Wrench Set 4pc Super Jumbo Wrench Set
More

Wilmar W50049 7 Piece...

3 stores Wilmar W50049 7 Piece Cordless Grease Gun Accessory
More

Apollo Tools 10.8V...

$76.29
Walmart.com Apollo Tools 10.8V Lithium-Ion Cordless Drill with 30-Piece Accessory Set
Free Shipping
/apollo-tools-108v/fx8kiAtXTwXIG7ZKSfJT3g==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Apollo Tools 10.8V Lithium-Ion Cordless Drill with 30-Piece Accessory Set:Superior Lightweight Lithium-Ion Battery Techology: Not only is there virtually no self-discharge, but the high-spec 1500 mAh Lithium-Ion battery, combined with efficient design of motor, transmission and mechanism produces a much more compact drill able to delivery 15 Nm of torque in a lightweight machine that is only weighs 2.2 lbsPowerful Drilling Power: The 15Nm of torque allows for a maximum drilling capacity of 5/32 Steel Plate, as well as for tightening and loosening screws found in plastic, metal, wood and brickThe rechargeable Lithium-Ion battery charges in 3 to 5 hours and is capable of a large number of charging and discharging cycles making this this a must have for the serious DIY enthusiast or trade... Less
More

Performance Tool 0-200 Psi...

$5.65
Autoplicity Performance Tool 0-200 Psi Air Gauge For Air Tank Accessory W10055
+ $10.13 shipping
/performance-tool-0200/Li-Fvny5CKWjioq2A5NF8Q==/info
Autoplicity
IN_STOCK ( In stock )
Store not rated
Performance Tool 0-200 Psi Air Gauge For Air Tank Accessory W10055 Air Tank Gauge Air Tank Gauge
More

General Tools T-Handle Reamer

$13.99
MidwayUSA General Tools T-Handle Reamer
+ $4.99 shipping
/general-tools-thandle/qVV0IC0ComzPxMzAHsQqNw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
With a precision- machined, tempered tool steel reamer attached to a stout T-handle for leverage, the chores of removing burrs and rough edges from holes will take far less time and effort to accomplish. The reamer measures 1/2 at its largest diameter and tapers steadily to a minimum diameter of 1/8, and can be used on most common materials including steel, brass, aluminum, plastic and wood. Technical InformationFeatur es:(from the manufacturer's website) Made of hardened and tempered tool steel with precision ground cutting edges T-handle provides leverage for easier reaming
More

WEN Variable Speed Rotary...

2 stores WEN Variable Speed Rotary Tool with 100 Piece Accessory Set
WPG1035: Features: -Rotary tool.-100 Piece accessory set for cutting, burr removal, polishing,...
More

Darex Accessory for...

$649.99
Northern Tool Darex Accessory for Tool/Drill Sharpener - 90° Attachment w/1/8 Inch-1/2 Inch Chuck, Model LEX300
Free Shipping
/darex-accessory-for/pUe8BIFbgew3bIKvFXRIGQ==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
Optional attachment for use with Darex XT3000 sharpener, Item# 3316900. 90 attachment can be interchanged without tools. U.S.A. Accessory Type 90 attachment. Model Number: LEX300. Size: 1. Age Group: Adult.
More

Darex Accessory for...

$559.99
Northern Tool Darex Accessory for Tool/Drill Sharpener - Step Drill Attachment w/1/8 Inch-1/2 Inch Chuck, Model LEX250
Free Shipping
/darex-accessory-for/x1SuKaPdYKMrxd-TMqvynQ==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
Optional attachment for use with Darex XT3000 sharpener, Item# 3316900. Step drill attachment can be interchanged without tools. U.S.A. Accessory Type Step drill attachment. Model Number: LEX250. Size: 1. Age Group: Adult.
More

Strong Hand Tools Nomad...

$139.99
Northern Tool Strong Hand Tools Nomad Welding Table, Model TS3020, Black
+ $27.49 shipping
/strong-hand-tools-nomad/RGjCBECkv2i0PqKVICMuLw==/info
Northern Tool
IN_STOCK ( In stock )
This welding table from Strong Hand Tools is suitable for metal working and hobbyist applications. This versatile, lightweight welding table adjusts to varying heights and tilts to different degrees. Compatible with all Strong Hand welding tools and accessories. Adjustable Yes, Color Black, Dimensions L x W x H in. 30 x 20 x 27, Frame Material Steel, Material Steel, Table Dimensions W x L in. 30 x 20, Weight Capacity lbs. 350, Material Thickness mils 14-ga., Product Type Welding table, Accessories Included No. Very Affordable Fully Adjustable Easily Movable Affordable, convenient welding and work table for the welding shop or home shop Three 1.1in.W x 22in.L slots in the tabletop allow you to insert clamps at any point, making it faster and easier to locate and clamp your workpieces in... Less
More

Darex Accessory for...

$359.99
Northern Tool Darex Accessory for Tool/Drill Sharpener - Diamond-Point Split Wheel w/260 Grit, Model PP16062GF
Free Shipping
/darex-accessory-for/GChJz58D648aoeGYV4VeTg==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
Optional attachment for use with Darex XT3000 sharpener, Item# 3316900. Diamond-point split wheel attachment can be interchanged without tools. U.S.A. Grit 260, Accessory Type Splitting wheel. Model Number: PP16062GF. Size: Small. Age Group: Adult.
More

Darex Accessory for...

$379.99
Northern Tool Darex Accessory for Tool/Drill Sharpener - Diamond Wheel w/180 Grit, Model PP16052GF
Free Shipping
/darex-accessory-for/bagPBaJFQm5it3o5dzGYdQ==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
Optional attachment for use with Darex XT3000 sharpener, Item# 3316900. Diamond wheel attachment can be interchanged without tools. U.S.A. Accessory Type Sharpening wheel, Grit 180. Model Number: PP16052GF. Size: Small. Age Group: Adult.
More

Darex Accessory for...

$449.99
Northern Tool Darex Accessory for Tool/Drill Sharpener - Brad-Point Attachment w/1/8in-1/2 Inch Chuck, Model LEX200
Free Shipping
/darex-accessory-for/kanOndVXOeMwGWYcMkmYYg==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
Optional attachment for use with Darex XT3000 sharpener, Item# 3316900. Brad-point attachment can be interchanged without tools. U.S.A. Accessory Type Brad-point attachment. Model Number: LEX200. Size: 1. Age Group: Adult.
More

California Air Tools Ultra...

$359.99
Northern Tool California Air Tools Ultra Quiet, Oil-Free Air Compressor - 2 HP, 10-Gallon, Model 10020
+ $57.99 shipping
/california-air-tools/p4f76f6ubFWVlCs57QQqAg==/info
Northern Tool
IN_STOCK ( In stock )
The California Air Tools Model# 10020 Ultra Quiet, Oil-Free Air Compressor is designed to be one of the quietest 2 HP air compressors in the industry, producing only 70 decibels of sound. The powerful 2 HP 110V motor operates at only 1,680 RPM, creating less noise and wear. Also has an Easy Start valve that allows for a no-load start, for a low start-up draw of only 14 Amps. The oil-free dual piston pump is designed for longevity, high performance and durability, and has been independently tested for minimum pump life of 3,000 hours before service. The 10-gallon air tank with wheel kit enables easy transporting and storage. This ultra-quiet air compressor is ideal for working in a shop, lab, garage or any area where noise is a major issue and high air delivery is required. Ideal for use... Less
More

Strong Hand Tools Nomad...

$59.99
Northern Tool Strong Hand Tools Nomad Welding Table Economy Tool Kit - 6-Piece Set, Model TSK104
+ $7.49 shipping
/strong-hand-tools-nomad/G2tCq4fNUtIkqzFoBqrpJA==/info
Northern Tool
IN_STOCK ( In stock )
The Strong Hand Tools Nomad Welding Table Economy Tool Kit provides a variety of tools to assist welders. Product Style Clamp/magnet set, Pieces qty. 6. 2 Mag-Spring spring-loaded clamps Mini magnet Multi-angle magnet 2 magnetic V-pads that instantly adjust to hold round or square metal parts Model Number: TSK104. Size: 2. Age Group: Adult.
More

Performance Tool Ratcheting...

$12.00
Northern Tool Performance Tool Ratcheting Bit Driver Set - 10-Piece, Model W38915
+ $5.99 shipping
/performance-tool/wzksFUf5VWvrhgmrBkXHkg==/info
Northern Tool
IN_STOCK ( In stock )
Performance Tool ratcheting bit driver features 52-tooth gear ratchet and quick switch for reversing. Compact design is ideal for tight spots. Includes 9 nickel-plated bits with holder 2 slotted, 2 Phillips and 4 star. Pieces qty. 10, Storage Type Holder, Tool Length in. 7 1/4, Ratchet Handle Yes. 52-tooth gear ratchet Quick switch for reversing Compact design for working in confined areas Includes 9 nickel-plated bits with holder 2 slotted, 2 Phillips, 4 star Model Number: W38915. Size: 10. Age Group: Adult.
More

OTC Tools & Equipment 1881...

$517.99
CPO Outlets OTC Tools & Equipment 1881 Accessory Set for 25-Ton Capacity Presses
Free Shipping
/otc-tools-equipment/SH5XySimAVAESs87jtJq1A==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
Bearing Pulling Attachment - 1124. 3/4 in. Ram Pushing Adapter - 34510. 1 in. Ram Pushing Adapter - 34511. V-Pushing Adapter - 34807. 11-1/2 in. Long V-Blocks Pair - 1891. Ram Forcing Cap - 28229. Threaded Adapter - 38953. Press Accessory Set - 1881. Accessory set for 25-ton capacity presses. Accessories attach to ram's forcing screw or support work on the press bed
More

Hammer Tool Kit Bowling...

$49.99
bowlingball.com Hammer Tool Kit Bowling Accessories
Free Shipping
/hammer-tool-kit-bowling/i-DvxBPRpoeneThQUAsWow==/info
bowlingball.com
IN_STOCK ( In stock )
Free Shipping
Bowling Accessories. The new set includes a bevel knife, ball workout tool and tape extraction tool packaged in a molded case bearing the Hammer logo.
More

Strong Hand Tools 4-In-1...

$14.99
Northern Tool Strong Hand Tools 4-In-1 Utility Clamping System - 4 1/2 Inch, Standard Pads, Model UD45-C3
+ $6.49 shipping
/strong-hand-tools-4in1/kxE-yuuAcev1OtsWAKmasQ==/info
Northern Tool
IN_STOCK ( In stock )
The Strong Hand Tools 4-In-1 Utility Clamping System helps you save time and money. Each innovative Strong Hand Clamp is specifically designed to be quick-acting, so you save valuable work set-up time. Built with heat-treated steel and nickel/chrome plating for strength and durability. Clamp Pressure lbs. 500, Pieces qty. 1, Length in. 4 1/2, Material Steel, Finish Type Nickel/chrome plating. Economical 4-in-1 Clamp adapts to serve four different functions 1 Standard clamping 2 Pipe clamping 3 Spreader clamping 4 Step-over clamping Removable / reversible clamp arm Threaded hole in the jaw allows for the addition of the unique V-Pad and Extender Block accessories 1 Clamp 4 Functions For standard clamping, the 4-in-1 Clamp is 10X faster than a C-clamp Sliding Arm quickly slides into... Less
More

Strong Hand Tools Nomad Table...

$49.99
Northern Tool Strong Hand Tools Nomad Table Connector Plate, Model TSL30
+ $12.99 shipping
/strong-hand-tools-nomad/1quliUhnzbi-_IgKtCR_Uw==/info
Northern Tool
IN_STOCK ( In stock )
This Strong Hand Tools connector plate joins two Nomad tables Item# 165413 together to form a 7.5-ft. workstation. Includes three 1.1in. slots that allow insertion of clamps. Through holes allow vertical or horizontal mounting options. Product Type Connector plate, Dimensions L x W x H in. 30 x 20 x 1, Accessories Included No. Model Number: TSL30. Size: 20. Age Group: Adult.
More

Strong Hand Tools 4-In-1...

$34.99
Northern Tool Strong Hand Tools 4-In-1 Utility Clamping System - 6 1/2 Inch, Standard Pads, Model UF65-C3
+ $6.99 shipping
/strong-hand-tools-4in1/RkEi7aFH2SJhcGK5_srQ2Q==/info
Northern Tool
IN_STOCK ( In stock )
The Strong Hand Tools 4-In-1 Utility Clamping System helps you save time and money. Each innovative Strong Hand clamp is specifically designed to be quick-acting, so you save valuable work set-up time. Built with heat-treated steel and nickel/chrome plating for strength and durability. Material Steel, Length in. 6 1/2, Finish Type Nickel/chrome, Throat Depth in. 4 3/4, Pieces qty. 1, Clamp Pressure lbs. 1,000. Economical 4-in-1 Clamp adapts to serve four different functions 1 Standard clamping 2 Pipe clamping 3 Spreader clamping 4 Step-over clamping Removable / reversible clamp arm Threaded hole in the jaw allows for the addition of the unique V-Pad and Extender Block accessories 1 Clamp 4 Functions For standard clamping, the 4-in-1 Clamp is 10X faster than a C-clamp Sliding Arm quickly... Less
More

Strong Hand Tools 4-In-1...

$79.99
Northern Tool Strong Hand Tools 4-In-1 Utility Clamping System - 12 1/2 Inch, Heavy-Duty Pads, Model UM125-C3
+ $9.49 shipping
/strong-hand-tools-4in1/jzW1rEve-hOhdmLd9kr9aw==/info
Northern Tool
IN_STOCK ( In stock )
The Strong Hand Tools 4-In-1 Utility Clamping System helps you save time and money. Each innovative Strong Hand Clamp is specifically designed to be quick-acting, so you save valuable work set-up time. Built with heat-treated steel and nickel/chrome plating for strength and durability. Material Steel, Length in. 12 1/2, Pieces qty. 1, Finish Type Nickel/chrome, Product Style Sliding arm clamp, Throat Depth in. 5 1/2, Clamp Pressure lbs. 2,400. The economical 4-in-1 Clamp adapts to serve four different functions 1. Standard Clamping 2. Pipe Clamping 3. Spreader Clamping 4. Step-Over Clamping The 4-in-1 clamp features the removable / reversible clamp arm and a threaded hole in the jaw for the addition of the unique V-Pad and Extender Block Accessories 1 Clamp . 4 Functions For standard... Less
More

Performance Tool Tie Rod/Ball...

$49.99
Northern Tool Performance Tool Tie Rod/Ball Joint Separator Set, Model W89310
+ $11.49 shipping
/performance-tool-tie/3Pgkv_9FQZ6WajQ9RrzXDA==/info
Northern Tool
IN_STOCK ( In stock )
The Performance Tool tie rod/ball joint separator set is used for separating most types of Pitman arms, tie rods and ball joints found on automotive and light truck applications. Storage Case Included Yes, Single, Pair, or Set Set, Product Type Ball joint tool, Pieces qty. 5, Opening in. 21/32, 1 1/16, 1 5/16, 1 3/8, 1 5/8. Complete coverage set features five different sizes, including separators for late model Ford and GM pickups Model Number: W89310. Size: 16. Age Group: Adult.
More

Performance Tool Long Shank...

$12.99
Northern Tool Performance Tool Long Shank Brake Caliper Hex Bits - 4-Piece Set, 3/8 Inch Drive, Model W86021, Brown
+ $5.99 shipping
/performance-tool-long/69AzHg1Hk3pkCTxCKyGssA==/info
Northern Tool
IN_STOCK ( In stock )
4in. long hex bits are made of heat-treated alloy steel with professional sand finish. Sizes 1/4in., 3/8in., 5/16in. and 7/32in. Product Style Disc brake tools, Material Type Alloy steel. 3/8in drive Sizes 1/4in., 3/8in., 5/16in. and 7/32in. Model Number: W86021. Size: 3. Color: Sand. Age Group: Adult.
More

Performance Tool Half Bulk...

$99.99
Northern Tool Performance Tool Half Bulk Bin Storage Rack - 47 Bins, Model #W5193, Blue
+ $31.99 shipping
/performance-tool-half/Gs4T6_VMWChz0O_1UfTP5w==/info
Northern Tool
IN_STOCK ( In stock )
The Performance Tool Half Bulk Bin Storage Rack consists of a metal rack that holds 32 small and 15 large plastic storage bins. Ideal for organizing and storing parts. Bin Color Red, blue, Material Type Plastic bins and steel rack, Shelving Type Bench rack, Dimensions D x W x H in. 11 x 37 x 45, Bins Included qty. 47. 32 small 5 1/2in. x 3 1/4in. bins 15 large 8 1/4in. x 5in. bins Includes assembly hardware Model Number: W5193. Size: 47. Color: Blue. Age Group: Adult.
More

Performance Tool Serpentine...

$49.99
Northern Tool Performance Tool Serpentine Belt Tool Set - 16-Piece Set, Model W89716
+ $7.99 shipping
/performance-tool/HOlHipmeisUCVATEhHI6aw==/info
Northern Tool
IN_STOCK ( In stock )
Ideal set for both removing and installing belts on serpentine systems using spring-loaded idler pulleys. Fits pulleys requiring 13, 14, 15 16 and 18mm Hex and both 3/8in. and 1/2in. square drive sizes. Single, Pair, or Set Set, Product Type Belt tools. Two bolt-on extensions 9in. bar with 1/2in. square drive fits Chrysler 2.5, 3.0 liter and Ford 4.6 liter engines Includes a GM fan clutch wrench attachment Loosens and tightens fan clutches on 1996 and later GM trucks and vans Unique design works with both 10mm and 13mm pulley bolts Model Number: W89716. Size: 16. Age Group: Adult.
More

Strong Hand Tools Torpedo...

$37.99
Northern Tool Strong Hand Tools Torpedo Mag-Level - 7 Inch x 1 1/4 Inch x 1 Inch, Model LM3723
+ $5.99 shipping
/strong-hand-tools-torpedo/Y7IcCQ0QMrnkxzwNmHZa8A==/info
Northern Tool
IN_STOCK ( In stock )
The Strong Hand Tools Torpedo Mag-Level features a built-in magnet that attaches securely to any metal structure, leaving your hands free to work. Dimensions L x W x H in. 7 x 1 1/4 x 1, Product Type Level, Angle Reference 45 and 90 leveling. Exclusive Z-Axis bubble pod provides 2nd axis reading Velcro strap attaches level to non-magnetic surfaces Model Number: LM3723. Size: 1. Age Group: Adult.
More

Ken-Tool Valve Breaker - 27...

$229.99
Northern Tool Ken-Tool Valve Breaker - 27 Inch, Model 35934
+ $9.99 shipping
/kentool-valve-breaker/aEmv9ddxNbPVCfseBkCF8Q==/info
Northern Tool
IN_STOCK ( In stock )
This Ken-Tool Valve Breaker is a compact and powerful valve breaker that removes valve stems quickly and easily. Product Type Valve breakers, Size 27 inch. Solid ram bar drives more energy into the valve Safety grip reduces vibration High-grade steel construction Fits in most 30in. tool boxes Model Number: 35934. Size: 30 Inch. Age Group: Adult.
More

Performance Tool Strut Coil...

$32.99
Northern Tool Performance Tool Strut Coil Spring Compressor, Model W80555
+ $8.49 shipping
/performance-tool-strut/cGmIPrz0z7-FphO7I_a8TA==/info
Northern Tool
IN_STOCK ( In stock )
Safely compresses springs for strut service or replacement. U-bolts securely attach tool to spring during operation for maximum safety. Product Type Compressor tools, Single, Pair, or Set Single. Model Number: W80555. Age Group: Adult.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.MediaMath-30410
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.MediaMath-30410