gerber 31 000674 mp 450

The forged steel head of the Gerber Splitting Axe II model 31-000917 supplies superior edge retention. A teflon coating has been applied to the blade to reduce friction and minimize those pesky blade sticks. The head is mounted on a glass-nylon filled handle that is nearly impossible to break. The two are balanced and weighted for maximum efficiency and your energy conservation. PTFE coated head to prevent sticking Forge steel head with 55HRC hardness rating Exploded handle for comfortable and secure grip Overall Length: 28.46 inches Blade Length: 3.15 inches Blade material: forged steel Handle material: Fibercomp (glass filled nylon) Weight: 5.5 lbs Made in Finland

The Hinderer Rescue knife features a 3.5 in. serrated blade with a blunt edge designed for rescue situations. It also features a red glass filled nylon handle that includes a hook cutter a glass breaker an oxygen tank valve opener Ballistic nylon sheath and has an overall length of 8.5 in. ATTRIBUTES Blade Detail: Serrated Edge Blade Length (inches): 3.50 Bl ade Material: 440A Ca rry System: Pocket Clip Handle Material: Red Nylon Handle Lock Style: Liner Lock Overall Length (inches): 8.50 Sp ecial Features: Oxygen tank Wrench Seat Belt Cutter Window Punch and Accessory Tool

AMT IPT self-priming two-stage high pressure engine driven pump includes precision cast high efficiency impellers to maximize performance and pressure. Cast iron diffusers for durability and extended life. Aluminum construction and heavy duty powder coated steel frame allows portability for use in many applications. This pump features cast iron male NPT ports, silicon carbide mechanical seals, EPDM/EPR O-rings and gaskets, built-in flapper/check valve and wrench for easy service of the pump. This unit is ideal for fire protection, emergency fire fighting, washdown and AG/sprinkler applications. 2-inches NPTM cast iron suction port. Three-way cast iron discharge port. Viton mechanical seal with silicon carbide and carbon faces. Maximum head up to 155 PSI. Maximum flow up to 160 GPM... Less

This FAG single-row thrust ball bearing has grooved races, a 90-degree contact angle, a brass cage, and an open construction. It is suitable for moderate-speed applications that support heavy axial loads in one direction and no radial loads. This deep-groove thrust ball bearing consists of a housing locating washer (ring), a shaft locating washer, and a ball and cage assembly. The washers have grooved raceways that conform to the balls rotating between them, allowing higher speeds and thrust bearing capacity than bearings with flat raceways. The single-row design supports thrust loads in a single direction and tolerates axial deflection, and the open construction allows for the bearing to be lubricated in place. This bearing has a 90-degree contact angle in which the ball and inner and... Less

The Enerpac MP-110 two-speed hydraulic hand pump is for testing and filling applications in construction, manufacturing, and maintenance and repair settings. This two-speed hand pump requires fewer handle strokes to move a load than a similarly rated single-speed pump, increasing productivity. The pump has an anodized aluminum body, stainless steel internal parts, and nitrile seals, for resistance to corrosion and wear. It can pump a variety of fluids, including demineralized water, oil and water emulsions, water glycols, mineral oils, and hydraulic fluids. An adjustable external release valve allows the operator to control pump pressure. The pump has a 1/4 National Pipe Taper (NPT) threads port for connecting to a hose or gauge (sold separately). The pump must be used with an external... Less

The Gator Machete sports Gerber's proprietary Gator rubber grip for ergonomic control while using either the fine edge blade on one side, or the saw on the other. The riveted, nylon sheath provides safe, durable transport.

This FAG single-row thrust ball bearing has grooved races, a 90-degree contact angle, a brass cage, and an open construction. It is suitable for moderate-speed applications that support heavy axial loads in one direction and no radial loads. This deep-groove thrust ball bearing consists of a housing locating washer (ring), a shaft locating washer, and a ball and cage assembly. The washers have grooved raceways that conform to the balls rotating between them, allowing higher speeds and thrust bearing capacity than bearings with flat raceways. The single-row design supports thrust loads in a single direction and tolerates axial deflection, and the open construction allows for the bearing to be lubricated in place. This bearing has a 90-degree contact angle in which the ball and inner and... Less

The Starrett Versatix MP bimetal band saw blade has a Versatix tooth design, a positive rake angle, and a raker tooth set for minimizing pinching and handling intermittent cutting of structural steel. The teeth are made of triple-tempered M-42 high-speed cobalt steel with an alloy steel backing strip that resists fatigue. The blade can make cuts in structural shapes, tubular shapes, and tubular bundles. It has extra blade clearance for minimizing binding and stress during cutting. The Versatix tooth design provides increased strength and reduces stripping compared to standard blades. It has a raker tooth set, which alternates between left-leaning, right-leaning, and unset teeth. The blade has a variable pitch, so the tooth size and gullet depth vary in order to reduce noise levels and... Less

This FAG single-row thrust ball bearing has grooved races, a 90-degree contact angle, a brass cage, and an open construction. It is suitable for moderate-speed applications that support heavy axial loads in one direction and no radial loads. This deep-groove thrust ball bearing consists of a housing locating washer (ring), a shaft locating washer, and a ball and cage assembly. The washers have grooved raceways that conform to the balls rotating between them, allowing higher speeds and thrust bearing capacity than bearings with flat raceways. The single-row design supports thrust loads in a single direction and tolerates axial deflection, and the open construction allows for the bearing to be lubricated in place. This bearing has a 90-degree contact angle in which the ball and inner and... Less

This FAG single-row thrust ball bearing has grooved races, a 90-degree contact angle, a brass cage, and an open construction. It is suitable for moderate-speed applications that support heavy axial loads in one direction and no radial loads. This deep-groove thrust ball bearing consists of a housing locating washer (ring), a shaft locating washer, and a ball and cage assembly. The washers have grooved raceways that conform to the balls rotating between them, allowing higher speeds and thrust bearing capacity than bearings with flat raceways. The single-row design supports thrust loads in a single direction and tolerates axial deflection, and the open construction allows for the bearing to be lubricated in place. This bearing has a 90-degree contact angle in which the ball and inner and... Less