ec pn 1 sli 2 extreme

Professional Baldor 1-1/2-HP Buff Motor gives you years of solid performance and rugged dependabilityThis industrial-grade buff motor from Baldor is used in pro body shops and restoration garages, with power to spare and reliability you can trust.Extended 30 overall shaft length 7/8 shafts3600 rpmUse with 10-dia. buffs (see Accessories tab) Can be wired for 110v AC or 220v AC3-year mfr's. warrantyBaldor 1-1/2-HP, 10 motor can be used at 110v or 220v The 1 1/2 HP 3600 RPM Motor with 7/8 shaft runs on single phase 60 HZ and requires 13.8 AMPS at 115 VAC or 6.9 AMPS at 230 VAC. Can be wired for either 110 or 220 VAC. Overall shaft length is about 30. Distance from housing to end of shaft is 7 1/4. See (13004) The Art of Buffing video for buffing tips and techniques. Wear a dust mask, hand,... Less

Solid rubber isolation mounts on all models. Steel welded safety guards on intake and exhaust. Thermal overload protectors on all electric models. All steel housing, frame, and carry handle - shaft guard standard. Universal frame and housing for all models - modular components. All aluminum non-sparking blower wheels. Blower wheels dynamically balanced to 3000 rpm. Continuous duty electric motor - CSA approved. CSA approved electric blowers. TEFC farm duty electric motor - dual voltage rated - 115/230 VAC. Motor temperature rating -30 degree F to 105 degree F. Gasketed capacitor cover. Designed for use in severe conditions.

Our most complete Concours 3-Gun HVLP Spray Gun Kit lets you take on big painting jobs as well as small detail jobsNo need to buy expensive pro paint guns when Eastwood's HVLP Concours Spray Guns have the same impressive features at a fraction of the cost. And your home compressor provides all the air power you'll need (4 cfm 29 psi) to use it.Includes 2 full-size guns and 1 mini-detail gunIncludes 2 full-size plastic cups, 1 mini-detail plastic cup Includes 5 needle/nozzle sets Two 1.2mm, plus each 1.0mm, 1.8mm, 2.2mmCompatible with solvent and waterborne coatingsAnodized adjustment knobs and air cap ringBacked by Eastwood's 10-year limited warrantyAffordabl e Concours 2 full-size guns and a mini-detail gun Eastwood Concours HVLP gravity-feed paint guns are satin-finished,... Less

Mr. Steam MRS MSSUPER2 Steambath Generator Mr. Steam Standard Features Compact, Fits within a Cabinet, Closet, Vanity, Basement, or Heated Attic Stainless Steel Resevoir Industrial, Large Diameter, Serviceable Heating Element Modular Snap-In Connections Electronic Water-Level Control System Full-Port Drain Valve. Limited Lifetime Steam Generator Parts Warranty Self-Diagnostic LED Indicators All Models UL/eUL Listed and CE Operation Certified Max Room Vol. Cu.Ft.: 575 KW: 12.0 Wire Size (AWG): 8 Water Usage Gallons: 1.6 Dimensions: 16 L x 18-1/2 H x 7-7/8 D Safety Features UL Recognized Electronic Controller System Built-In, Low-Voltage 24-Volt Control 60-Minute Electronic Countdown with 75-Minute Limiting Safety Back-Up ASME Safety Valve Required Plumbing Water Supply (3/8 NPT) Steam... Less

Parker Hannifin is the world's leading diversified manufacturer of motion and control technologies and systems, providing precision- engineered solutions for a wide variety of mobile, industrial and aerospace markets. Parkers ECS Air Line Silencer - Reclassifier offers excellent noise reduction, corrosion resistance and light weight for pneumatic applications. Compressor oils and lubricating oils are exhausted from valves, cylinders and air motors into the ECS. Oil aerosols are “coalesced” into larger droplets and gravity pulls them into the attached drain sump. The sump can then be drained manually or by using a 1/4 ID plastic tube drain. The air flowing into the ECS is also muffled or silenced as it enters the inside of the ECS and passes through the filter media into the atmosphere... Less

The Thomson precision series steel ball bushing bearing pillow block has integral lip seals and a self-aligning housing. The four-bolt ductile iron housing with steel ball bearing insert provides ready-to-mount installation. The self-aligning housing can be used with supported shafts and can be relubricated if necessary. The integral lip seals protect against contamination and help retain lubricant. The open-type pillow block is suitable for support rail clearance in high temperature applications. Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball,... Less

The W18LTX 4.0 cordless angle grinder is part of Metabos PowerMasterSeries of 18 V lithium-ion cordless power tools. This 4-1/2-Inch grinders slim motor housing and ergonomic side handle make it comfortable and easy to use throughout the day. The cost-effective, durable W18LTX is ideal for users needing a reliable tool for tough, portable grinding and cutting. Incorporating more than 85 years of Metabo grinding innovations, the W18LTX features a robust, debris-resistant 4-pole motor with easily replaceable carbon brushes, and removable dust filter. It has a no-load speed of 8,000 rpm. Safety features include advanced motor protection with a no-volt release switch that protects against unintentional starts when inserting a battery, a burst-proof guard that can be adjusted in seconds... Less

This Palmetto style 5010 flexible graphite compression packing seal with Inconel wire and a zinc coating protects valves from fluid leaks in extreme pressure steam service. The interwoven braided packing seal is made of pure expanded flexible graphite with Inconel wire knitted around each strand. Flexible graphite has a low coefficient of friction in both low and high temperatures, handles high shaft speeds, and resists harsh chemicals and high temperatures. It transfers heat away from the shaft or stem to prevent glazing and scoring, reducing leakage and extending the packing and sleeve life. It is resilient and conforms to surfaces when compressed to create a tight seal. A knit braid jacket of Inconel wire in each strand of yarn increases the mechanical strength and pressure resistance... Less

This Palmetto style 5010 flexible graphite compression packing seal with Inconel wire and a zinc coating protects valves from fluid leaks in extreme pressure steam service. The interwoven braided packing seal is made of pure expanded flexible graphite with Inconel wire knitted around each strand. Flexible graphite has a low coefficient of friction in both low and high temperatures, handles high shaft speeds, and resists harsh chemicals and high temperatures. It transfers heat away from the shaft or stem to prevent glazing and scoring, reducing leakage and extending the packing and sleeve life. It is resilient and conforms to surfaces when compressed to create a tight seal. A knit braid jacket of Inconel wire in each strand of yarn increases the mechanical strength and pressure resistance... Less

This Palmetto style 5010 flexible graphite compression packing seal with Inconel wire and a zinc coating protects valves from fluid leaks in extreme pressure steam service. The interwoven braided packing seal is made of pure expanded flexible graphite with Inconel wire knitted around each strand. Flexible graphite has a low coefficient of friction in both low and high temperatures, handles high shaft speeds, and resists harsh chemicals and high temperatures. It transfers heat away from the shaft or stem to prevent glazing and scoring, reducing leakage and extending the packing and sleeve life. It is resilient and conforms to surfaces when compressed to create a tight seal. A knit braid jacket of Inconel wire in each strand of yarn increases the mechanical strength and pressure resistance... Less

This Thomson Super Smart series open type ball bushing bearing provides free linear movement on a hardened steel shaft. Ball bushing bearings are linear ball bearings that reduce friction for linear motion. The bearing’s outer sleeve and ball retainer are made of Delrin (polyoxymethylene ) for strength and dimensional stability, and the balls are made of chrome steel for high load capacity and resistance to wear. A self-alignment feature accommodates misalignment from installation imperfections, including housing bore out of roundness, without impairment of performance. The low coefficient of friction allows the use of smaller motors, belts, and gears compared to conventional linear bearings. The bearing has a maximum operating temperature of 185 degrees F (85 degrees C). This ball... Less

This Thomson Super Smart series open type ball bushing bearing provides free linear movement on a hardened steel shaft. Ball bushing bearings are linear ball bearings that reduce friction for linear motion. The bearing’s outer sleeve and ball retainer are made of Delrin (polyoxymethylene ) for strength and dimensional stability, and the balls are made of chrome steel for high load capacity and resistance to wear. A self-alignment feature accommodates misalignment from installation imperfections, including housing bore out of roundness, without impairment of performance. The low coefficient of friction allows the use of smaller motors, belts, and gears compared to conventional linear bearings. The bearing has a maximum operating temperature of 185 degrees F (85 degrees C). This ball... Less

This Thomson Super Smart series open type ball bushing bearing provides free linear movement on a hardened steel shaft. Ball bushing bearings are linear ball bearings that reduce friction for linear motion. The bearing’s outer sleeve and ball retainer are made of Delrin (polyoxymethylene ) for strength and dimensional stability, and the balls are made of chrome steel for high load capacity and resistance to wear. A self-alignment feature accommodates misalignment from installation imperfections, including housing bore out of roundness, without impairment of performance. The low coefficient of friction allows the use of smaller motors, belts, and gears compared to conventional linear bearings. The bearing has a maximum operating temperature of 185 degrees F (85 degrees C). This ball... Less

This Thomson Super Smart series open type ball bushing bearing provides free linear movement on a hardened steel shaft. Ball bushing bearings are linear ball bearings that reduce friction for linear motion. The bearing’s outer sleeve and ball retainer are made of Delrin (polyoxymethylene ) for strength and dimensional stability, and the balls are made of stainless steel for resistance to wear and corrosion. A self-alignment feature accommodates misalignment from installation imperfections, including housing bore out of roundness, without impairment of performance. The low coefficient of friction allows the use of smaller motors, belts, and gears compared to conventional linear bearings. The bearing has a maximum operating temperature of 185 degrees F (85 degrees C). This ball bushing... Less

Mr. Steam MRS MSSUPER2 Steambath Generator Mr. Steam Standard Features Compact, Fits within a Cabinet, Closet, Vanity, Basement, or Heated Attic Stainless Steel Resevoir Industrial, Large Diameter, Serviceable Heating Element Modular Snap-In Connections Electronic Water-Level Control System Full-Port Drain Valve. Limited Lifetime Steam Generator Parts Warranty Self-Diagnostic LED Indicators All Models UL/eUL Listed and CE Operation Certified Max Room Vol. Cu.Ft.: 575 KW: 12.0 Wire Size (AWG): 8 Water Usage Gallons: 1.6 Dimensions: 16 L x 18-1/2 H x 7-7/8 D Safety Features UL Recognized Electronic Controller System Built-In, Low-Voltage 24-Volt Control 60-Minute Electronic Countdown with 75-Minute Limiting Safety Back-Up ASME Safety Valve Required Plumbing Water Supply (3/8 NPT) Steam... Less

This Thomson Super Smart series open type ball bushing bearing provides free linear movement on a hardened steel shaft. Ball bushing bearings are linear ball bearings that reduce friction for linear motion. The bearing’s outer sleeve and ball retainer are made of Delrin (polyoxymethylene ) for strength and dimensional stability, and the balls are made of stainless steel for resistance to wear and corrosion. A self-alignment feature accommodates misalignment from installation imperfections, including housing bore out of roundness, without impairment of performance. The low coefficient of friction allows the use of smaller motors, belts, and gears compared to conventional linear bearings. The bearing has a maximum operating temperature of 185 degrees F (85 degrees C). This ball bushing... Less

Mr. Steam MRS MSSUPER1 Steambath Generator Mr. Steam Standard Features Compact, Fits within a Cabinet, Closet, Vanity, Basement, or Heated Attic Stainless Steel Resevoir Industrial, Large Diameter, Serviceable Heating Element Modular Snap-In Connections Electronic Water-Level Control System Full-Port Drain Valve. Limited Lifetime Steam Generator Parts Warranty Self-Diagnostic LED Indicators All Models UL/eUL Listed and CE Operation Certified Max Room Vol. Cu.Ft.: 475 KW: 10.0 Wire Size (AWG): 8 Water Usage Gallons: 1.4 Dimensions: 16 L x 18-1/2 H x 7-7/8 D Safety Features UL Recognized Electronic Controller System Built-In, Low-Voltage 24-Volt Control 60-Minute Electronic Countdown with 75-Minute Limiting Safety Back-Up ASME Safety Valve Required Plumbing Water Supply (3/8 NPT) Steam... Less

The Vestil CYL-DLX-1-PN deluxe cylinder dolly has a steel frame, a nose plate, two pneumatic wheels, and two roller guides, and can be tilted backward and rolled to move a cylinder measuring up to 11-1/2 inches in diameter. The dolly is made of steel, which is stronger than aluminum and more resistant to fractures than cast iron. The blue powder-coated finish resists scratches, chipping, fading, and other wear. The pneumatic wheels measure 10 inches in diameter, provide better traction than polyurethane wheels, are shock-absorbent, and can be used on uneven surfaces. Two roller guides on the nose plate measure 1-1/4 inches wide and 4 inches in diameter, are made of solid rubber, and help facilitate loading. Two chains help secure the cylinder for transport. This dolly has a load capacity... Less

The BW Technologies GA24XT-M GasAlertClip 2-year carbon monoxide (CO) detector is a handheld, single-gas detector that uses an electrochemical cell sensor to monitor carbon monoxide (CO) levels consistently for up to two years without requiring calibration, recharging, or battery replacement, and that has audio, visual, and vibration alarms, which alert simultaneously when carbon monoxide reaches the preset low and high alarm levels. The detector has an alphanumeric LCD screen that can be adjusted by the user to show the gas type monitored, the two alarm set-points, the alarm level (low or high), the maximum gas level recorded within the previous 24-hour period, the time elapsed since reaching that maximum level, and the detector life remaining, as well as whether or not a self-test is... Less

The Thomson super series twin ball bushing bearing pillow block has integral lip seals and a self-aligning housing. The four-bolt ductile iron housing with two steel ball bearing insert provides ready-to-mount installation. The self-aligning housing can be used with supported shafts and can be relubricated if necessary. The integral lip seals protect against contamination and help retain lubricant. The open-type pillow block is suitable for support rail clearance. Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle,... Less

The Thomson super series ball bushing bearing pillow block has integral lip seals and a self-aligning housing. The four-bolt ductile iron housing with single steel ball bearing insert provides ready-to-mount installation. The self-aligning housing can be used with supported shafts and can be relubricated if necessary. The integral lip seals protect against contamination and help retain lubricant. The open-type pillow block is suitable for support rail clearance. Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle,... Less

The Thomson super series ball bushing bearing pillow block is corrosion resistant, has integral lip seals, and a self-aligning housing. The four-bolt ductile iron housing with single steel ball bearing insert provides ready-to-mount installation. The self-aligning housing can be used with supported shafts and can be relubricated if necessary. The integral lip seals protect against contamination and help retain lubricant. The open-type pillow block is suitable for support rail clearance. Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical,... Less

This Hardinge 2M round smooth collet is used to hold workpieces in a lathe or other machine tool. It has a through-capacity of 1/2”and an overall length of 2-7/8”. The internal right-hand 0.375” x 16 draw bar threads are heat treated for long life. The collet fits 2 Morse taper spindles. It is made of spring-tempered steel that has been hardened and ground for accuracy and resistance to wear and breakage. This collet is used to hold metals, plastics, carbide, graphite, and ceramics in industrial manufacturing applications. Collets are cone-shaped sleeves used to hold rodlike workpieces, or the shafts of tools, in the spindles of lathes, mills, or other machine tools. They are typically made of spring steel with one or more slots along the length to allow expansion and contraction, and... Less

This Hardinge 2M round smooth collet is used to hold workpieces in a lathe or other machine tool. It has a through-capacity of 1/2”and an overall length of 2-7/8”. The internal right-hand 0.375” x 16 draw bar threads are heat treated for long life. The collet fits 2 Morse taper spindles. It is made of spring-tempered steel that has been hardened and ground for accuracy and resistance to wear and breakage. This collet is used to hold metals, plastics, carbide, graphite, and ceramics in industrial manufacturing applications. Collets are cone-shaped sleeves used to hold rodlike workpieces, or the shafts of tools, in the spindles of lathes, mills, or other machine tools. They are typically made of spring steel with one or more slots along the length to allow expansion and contraction, and... Less

This Hardinge 1J round smooth collet is used to hold workpieces in a lathe or other machine tool. It has a through-capacity of 1-1/16 inches, a back bearing diameter of 1.250 inches, and an overall length of 3 inches. The collet has external right-hand 1.238 inches x 20 threads for connecting to the draw bar, and the threads are heat-treated for long life. It is made of spring-tempered steel that has been hardened and ground for accuracy and resistance to wear and breakage. This collet is used to hold metals, plastics, carbide, graphite, and ceramics in industrial manufacturing applications. Collets are cone-shaped sleeves used to hold rodlike workpieces, or the shafts of tools, in the spindles of lathes, mills, or other machine tools. They are typically made of spring steel with one or... Less

This Hardinge 1A round smooth collet is used to hold workpieces in a lathe or other machine tool. It has a through-capacity of 1/2 inch, a back bearing diameter of 41/64 inch, and an overall length of 2-9/16 inches. The collet has external right-hand 0.640 inch x 26 threads for connecting to the draw bar, and the threads are heat-treated for long life. It is made of spring-tempered steel that has been hardened and ground for accuracy and resistance to wear and breakage. This collet is used to hold metals, plastics, carbide, graphite, and ceramics in industrial manufacturing applications. Collets are cone-shaped sleeves used to hold rodlike workpieces, or the shafts of tools, in the spindles of lathes, mills, or other machine tools. They are typically made of spring steel with one or more... Less

Vestil Tool is a pressure type sealer. The overlapped polyester band is welded by heat and pressure. Specifications: required air pressure: 72 - 100 psi, adjusting range of weld time: 2 - 5 seconds, A air-filter-regulat or must be installed, air hose must be at least 1/4-inches ID. Strap material to be used: polyester. Strap width to be used: 3/4 - 1-inches, strap thickness to be used: 0.02 - 0.04-inches, tool balancer receiver/carrying handle on top. Measures 10-61/64-inches length by 5-113/128-inches width by 6-103/128-inches height.

Single operating platform does it all form the most basic installation to the most elaborate. Easy to add plug & play spa therapy accessories. Can be installed up to 60 feet away. Exclusive microprocessor operating system. Precision temperature probe for optimal steam room temperature control. Removable & serviceable, industrial strength heating elements. Integrated time cutoff feature. C-UL-US listed. CE & NOM approved. Express Steam means you can be steaming in seconds. Includes a built-in thermostat to keep water in the generator tank warm enough to bring up steam quickly while still allowing water to be safely drained to code requirements. 240 Volt. Total room volume: 361-475. 10 KW. Amps 240: 42. Wire size: 8 gauge. Water usage in gallons: 1.4 (Based on 20 minutes of operation). 17... Less

Mr. Steam MRS MSSUPER1 Steambath Generator Mr. Steam Standard Features Compact, Fits within a Cabinet, Closet, Vanity, Basement, or Heated Attic Stainless Steel Resevoir Industrial, Large Diameter, Serviceable Heating Element Modular Snap-In Connections Electronic Water-Level Control System Full-Port Drain Valve. Limited Lifetime Steam Generator Parts Warranty Self-Diagnostic LED Indicators All Models UL/eUL Listed and CE Operation Certified Max Room Vol. Cu.Ft.: 475 KW: 10.0 Wire Size (AWG): 8 Water Usage Gallons: 1.4 Dimensions: 16 L x 18-1/2 H x 7-7/8 D Safety Features UL Recognized Electronic Controller System Built-In, Low-Voltage 24-Volt Control 60-Minute Electronic Countdown with 75-Minute Limiting Safety Back-Up ASME Safety Valve Required Plumbing Water Supply (3/8 NPT) Steam... Less

This Hardinge 2M round smooth collet is used to hold workpieces in a lathe or other machine tool. It has a through-capacity of 1/2”and an overall length of 2-7/8”. The internal right-hand 0.375” x 16 draw bar threads are heat treated for long life. The collet fits 2 Morse taper spindles. It is made of spring-tempered steel that has been hardened and ground for accuracy and resistance to wear and breakage. This collet is used to hold metals, plastics, carbide, graphite, and ceramics in industrial manufacturing applications. Collets are cone-shaped sleeves used to hold rodlike workpieces, or the shafts of tools, in the spindles of lathes, mills, or other machine tools. They are typically made of spring steel with one or more slots along the length to allow expansion and contraction, and... Less