Battery Powered

Brand New!This is a great tool for all purpose electrical testing. Applications include: fuel injection systems, fuel pumps, charging systems, electric motors and most parasitic drains. Capable of measuring as low as 10 milliamps. Features:35 Test ranges 10 Test functions Auto power off Auto-ranging Data hold Continuity beep Overload protection Clamp opening 7/89V Battery included Manufacturers look and details may vary ATD-5599 Please Note:Import duties, taxes and charges are not included in t

Clamp On Ammeter, Ac Response Trms, 2500 Max. Ac Amps, 999.9 Max. Dc Amps, 600 Max. Ac Volts, 600 Max. Dc Volts, 60000 Max. Ohms, Jaw Capacity 1-1/3 In., Battery Type Aa, Safety Rating Cat Iv 600v, Cat Iii 1000v, Calibration Certificate Nist, Audible Continuity Yesfrequency Counter 5 To 500 Hzpeak Hold Yesdisplay Backlit Lcdcounts 6000, Calibration Frequency 10 To 500 Hz, Auto Ranging Yes, Data Hold Yesincludes Soft Carrying Case, Test Leads, (2) Batteries, Instructions

Also known as: ESI-687, ESI687; With the capability of measuring down to 1 milliamp (.001A), the #687 is a great tool for all low current applications. Especially for diagnosing parasitic drains! Clamp opening is large enough to fit over most negative battery cables. Applications: fuel injectors, fuel pumps, electric motors, battery drains, charging systems. Features:35 Test Ranges 10 Test Functions Auto Power Off Auto-Ranging Data Hold Continuity Beep Overload Protection Clamp opening 5/8 inches 9 Volt Battery Included Carrying Case included TEST RANGES: DC Amps: 0-4A, 80A AC Amps: 0-4A, 80A DC Volts: 0-400mV, 4V, 40V, 400V, 600V AC Volts: 0-400mV, 4V, 40V, 400V, 600V Ohms: 0-400, 4k, 40k, 400k, 4M, 40M Frequency: 0-5Hz, 50Hz, 500Hz, 5kHz, 50kHz, 500kHz, 5MHz, 10MHz Capacitance: 0-40nF,... Less

This meter is a portable professional measuring instrument with LCD and back light easily reading. This single-hand operation design for the range switch makes measurement simple and easy. Overload protection and low battery indication are provided. It is an ideal multi-function Instrument with scores of practical applications for professional, workshop, school, hobby and home use.

This is a brand new CEM DT-3348 CE certified digital clamp-on AC/DC meter. The DT-3348 Professional True RMS Clamp Meter provides accurate AC/DC Current, Voltage and Wattage readings regardless of waveforms. This meter can be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform. This meter is CAT III 600V rated. It also measures frequency and resistance. It comes with a heavy duty carrying case to protect your device when working in the field. FEATURES * True RMS AC voltage and current * DC and AC True power to 240kW * 1.2?Ç¥ (30mm) Clamp digital display * Electronic overload protection * Continuity buzzer & Diode check * Data hold function * DCA zero function * Auto power off * Low battery indication * AC/DC current *... Less

Compatible with many lab scopes and graphing multimeters Use to generate current waveforms for diagnostic analysis Also works great with digital multimeters Small jaw opening of 3/8” or 9mm works in tight spaces Low battery indication Measure Range: 0-80 Amps AC/DC with resolution of .01a.

Measures AC/DC current without disconnecting the circuit. Also measures voltage & resistance. Measures to 1.0 percent accuracy. Autoranging. Auto power off. Includes test leads, K-type thermocouple, belt holster & detailed owners manual. Holds peak measurements for easy viewing. Measures up to 800 amps AC/DC. Uses 9V battery, not included. Includes test leads & belt holster, plus double-molded case.

Spread auto terminal connectors with this pair of reamers.

Cordless Ear Clamp Pincer, Battery Operated, 9.6 Vdc, Nicad Battery Type, Jaw Width 1 1/2 In, Clamp Range 1/2 To 3 In, Crimping Force 900 Lbs, Closing Time 2 Sec, Overall Length 10 In, Display Type Led, Includes 2 Batteries, Charger, And Carrying Case

332-CM-950 Features: -AC/DC voltage and resistance measuring capability.-Audibl e continuity test.-Data hold to capture important readings.-Easy to read backlit display.-Min/Max feature for added versatility.-Elect rical Resistance: 400.00 kOhm.-Display Type: Digital LCD.-Function: Current, Voltage, Resistance, Continuity, Frequency.-Price is for 1 Each. Includes: -Includes: Carrying Case, Test Leads. Specifications: -CM-950 and CM-1550 have True RMS for accuracy when harmonics are present.-Frequency : 0.4 kHz.-Power Source: (1) 9V Battery.

500 amp Parrot style jaws Used for larger amperage chargers and jumper cables Includes positive and negative clamps Accepts up to No. 2 cable Heavy duty construction Easy grip handles

This is a brand new CEM DT-3368 CE certified digital clamp meter. This top-of-the-line device features 1000 Amp True RMS precision measurement, inrush current measurement, and 6600 count LCD display with back light. The DT-3368 also offers accurate AC/DC voltage, resistance, duty cycle, frequency and temperature measurements. The inputs are protected to EN 61010-1 CATIII 600V. A heavy duty carrying pouch is also included for the protection of the device and for your convenience. *** Warning: This device is to be used by a certified technician only. All safety regulation should be observed when testing high power circuits. FEATURES * True RMS AC voltage and current up to 1000A * Inrush current measurement (AC ONLY) * Type K temperature measurement * Resistance, frequency and duty cycle... Less