Electric Powered

GTC 600 Amps AC/DC current clamp meter with its auto-range and high sensitivity allows the measurement of AC/DC currents with a resolution down to 0.1 A, and up to a maximum of 600A, making it ideal for testing all kinds of loads such as found in electric motors, fuel pumps, charging systems, starter currents, alternators, etc. This features a small and narrow jaw, which can accept cables up to 1 inch (25.4mm) in diameter and be used in confined spaces, wire bundles, and small gauge wires. Other features includes resistance measurement functions, continuity test (with buzzer), and display hold and peak detector functions.

Shop for Hand Tools at The Home Depot. Designed to provide sure, non-slip clamping on all shapes. Holds two pieces of metal together. Holds parts in proper alignment-even when material is not of identical thickness. A clamp that keeps it together and keeps your hands free to work.

Also known as: ESI-687, ESI687; With the capability of measuring down to 1 milliamp (.001A), the #687 is a great tool for all low current applications. Especially for diagnosing parasitic drains! Clamp opening is large enough to fit over most negative battery cables. Applications: fuel injectors, fuel pumps, electric motors, battery drains, charging systems. Features:35 Test Ranges 10 Test Functions Auto Power Off Auto-Ranging Data Hold Continuity Beep Overload Protection Clamp opening 5/8 inches 9 Volt Battery Included Carrying Case included TEST RANGES: DC Amps: 0-4A, 80A AC Amps: 0-4A, 80A DC Volts: 0-400mV, 4V, 40V, 400V, 600V AC Volts: 0-400mV, 4V, 40V, 400V, 600V Ohms: 0-400, 4k, 40k, 400k, 4M, 40M Frequency: 0-5Hz, 50Hz, 500Hz, 5kHz, 50kHz, 500kHz, 5MHz, 10MHz Capacitance: 0-40nF,... Less

Specifications: Carbonator Pump MotorSplit Phase Open Drip proofHP 1/3RPM 1725/1425Voltage 220-240 VNEMA Frame 48YService Factor 1.00Frequency 60&50 HzMounting CradleBearings BallThermal Protection AutomaticFull Load Amps 2.7-2.7

This MIG FLUX WELDER 230 VOLT,160 AMP is new and in the manufacturer original retail box.CHICAGO ELECTRIC MIG FLUX WELDER 230 VOLT,160 AMP Includes:Wheel Kit / Wire Spool / Torch Assy. / Grounding Clamp Wire Brush Hammer / Spare 1.0 0.8 Welding Tips/ Hand-Held Face Shield Welding Current 35 ~ 140 A Duty Cycle 18% @ 140 A / 100% @ 45 A (Refer to chart in manual) Power Consumption 240 V~ / 60 Hz / 25 A (Connect to a 25 A minimum dedicated circuit) Open Voltage 15.5 - 20 V Required Power Plug Type

Shop for Hand Tools at The Home Depot. Designed to provide sure, non-slip clamping on all shapes. Has a precisely threaded spindle for smooth operations. A new design frame provides maximum strength and tenure. A clamp that keeps it together and keeps your hands free to work.

MPQ3145: Features: -Earth resistant clamp meter.-Use for testing grounds and bonding.-Neither supplementary earth leads nor break earth equipment is necessary.-Ground resistance results can be safe and fast only by clamping the ground line.-Additionally , current testing is also provided.-Measure resistance 0.01 Ohms - 1200 Ohms.-Can measure the leakage current to 1mA and neutral current to 20A RMS.-Tester is widely used in the field of electric power distribution, telecommunication , architectural ground and testing industrial electronic equipment.-0.01 Ohms high accuracy for low resistance measurement. -0.001 Ohms high resolution.-Record 99 resistance measurement valves.-Set alarm threshold in 1 Ohms to 100 Ohms.-Measure leakage current and neutral current.-Battery capacity... Less

Brand New!This is a great tool for all purpose electrical testing. Applications include: fuel injection systems, fuel pumps, charging systems, electric motors and most parasitic drains. Capable of measuring as low as 10 milliamps. Features:35 Test ranges 10 Test functions Auto power off Auto-ranging Data hold Continuity beep Overload protection Clamp opening 7/89V Battery included Manufacturers look and details may vary ATD-5599 Please Note:Import duties, taxes and charges are not included in t

BOS3814 Features: -Price Is For One Each -Minimum Order Of 1.-UNSPC CODE: 27112700.-Electric Power Tools & Accessories Electric Power Tools Accessories mro plant maintenance electric tool.-MACHINE CUTOFF 14IN ABRASIVE. Construction: -15 Amps, 3,900 RPM Superior motor insulation Locking vise with quick release Adjustable fence Trigger with Lock-On Spindle lock Ball and roller bearing construction Adjustable depth stop Precision helical cut steel gears Built-in wheel wrench storage Hold down chain Large carrying handle Double Insulated, UL listed, complies to OSHA. Specifications: -Bosch Model 3418 14'''' benchtop abrasive cutoff machine boasts superior power with extra protection for fast efficient cuts. With 15 amps and a 3,900-RPM motor with ball and roller bearings and helical cut... Less

competitive store 8 EMT PIPE ELECTRIC CONDUIT HANGER 5/8 ROD 1-1/4 x 1 C IRON BEAM CLAMP SUPPORT (8)5/8 IRON BEAM CLAMPS For 5/8 THREADED ROD This listing is for 8 new clamps in good general condition, though there may be some very minor light dirtiness or scuffs from being in storage. Used on a beam, girder, or similar structure to provide a mounting base for conduit or pipe hangers. For attaching threaded rod or set lock bolt. Each is made of mallable iron and opens to approximately 1-1/4 th

GTC 1000 Amps AC/DC current clamp meter is equipped with auto-range and high current measurement capability and allows the measurement of AC/DC currents with a resolution down to 0.1 A, and up to a maximum of 1000A, making it ideal for testing all kinds of loads such as found in electric motors, fuel pumps, charging systems, starter currents, alternators, etc. This features a small and narrow jaw, which can accept cables up to 1 inch (25.4mm) in diameter and be used in confined spaces, wire bundles, and small gauge wires. Other features includes resistance measurement functions, continuity test (with buzzer), and display hold and peak detector functions.

Shop for Hand Tools at The Home Depot. Designed to provide sure, non-slip clamping on all shapes. Has a precisely threaded spindle for smooth operations. New design frame supplies maximum strength. A clamp that keeps holds it all together and keeps your hands free to work.

This high sensitivity clamp meter can measure the leakage current to 1mA & neutral current to 20A RMS; This tester is widely used in the field of electric power distribution, telecommunication , architectural ground & testing industrial electronic equipment; 0.01 Ohms high accuracy for low resistance measurement; 0.001 Ohms high resolution; Record 99 resistance measurement valves; Set alarm threshold in 1 Ohms to 100 Ohms; Measure leakage current and neutral current; 1.8 X 1.3 large jaws of exactitude measurement probe; Battery capacity indicator; Digital measurement, autorange; Double insulation, strengthen the interference resistance; One second per test gives quick measurement; Earth resistant electric clamp meter display: LCD 3 3/4 digits

Shop at The Home Depot. This heavy duty ground clamp will take cable sizes up to #2/0. Grounds the work to be welded to a good electrical ground. Cable connects directly to jaws. Helps to make a good electrical connection with the metal being welded.

competitive Store 10 IRON BEAM CLAMP C 3/4 CAPACITY 3/8-16 ROD ELECTRIC EMT CONDUIT PIPE HANGER . BEAM CLAMPS 3/4 CAPACITY 3/8-16 ROD (Lot Quantity = 10 Clamps) This listing is for 10 new beam clamps out of their larger bulk packaging in good condition. Used on a beam, girder, or similar structure to provide a mounting base for conduit or pipe hangers. For attaching threaded rod or set lock bolt. Each is made of mallable iron and opens to a maximum 3/4 capacity with a 7/8 throat depth and 1-1/

The Enviroboot EBCH-1, by Environmental Safety Solutions, LLC., is an award winning* dust suppression device tailored to fit most major makes and models of electric and pneumatic hammer drills, chipping hammers, and needle scalers, eliminating up to 95% of all airborne particulates that would normally enter the atmosphere through such work. Fastening the Enviroboot to your demolition hammer is quick and easy, requiring the user to simply slide it on to the base of the hammer, around the chisel, and fastening the boot tightly around the base with the supplied clamp. Following, the user attaches a HEPA-filtered vacuum into the Enviroboot's vacuum port using a 1.5 hose. In mere seconds, your equipment will be ready for dust-suppressed demolition! Dust-suppressed demolition provides a safer,... Less

competitive Store 10 EMT PIPE ELECTRIC CONDUIT HANGER 9/16 ROD 5/8 3/4 C IRON BEAM CLAMP SUPPORT (10)5/8 - 3/4 IRON BEAM CLAMPS For 9/16 -12 THREADED ROD This listing is for 10 new assorted clamps in good condition, though there may be some minor light surface rust from being in storage. Used on a beam, girder, or similar structure to provide a mounting base for conduit or pipe hangers. For attaching threaded rod or set lock bolt. Each is made of mallable iron and opens to between 5/8 to 3/4 c

The pull style handle allows you to set the valve in four different positions simply by pulling and turning. 100 Percent tested / 100 percent inspected 100 percent pressure hydraulic tested for reliability. Wetted surfaces polished to 3-A standards. Actuation available: double-acting, air-to-spring, electric. Vacuum rating: 14.2 psi at 68 degree F. Temperature range: 15 degree f to 200 degree F. Clamp style is standard.

Clamp the clamp on noise sensor around the lan cable and monitor the noise Hilogger display. Measurement with the clamp on noise sensor is earth-free. The clamp on noise sensor measures noise current. The noise current level and frequency of the earth line can be measured simply, without direct contact. Because measurement requires no electrical contact, there's no need to worry about interfering with communications, electric shock or short circuits, and use is simple and safe even in active-line conditions. 1kHz to 100MHz (-3dB) band width. AC 10A (15A peak) rated current. +/-3.0 percent rdg, +/- 0.001 percent fs (fs = 10A, f=15kHz, with conductor centered in clamp) amplitude accuracy. up to f20mm measurable conductor diameter. CAT II 600V, CAT III 300V (insulated conductor) maximum... Less

Kyoritsu 8124 load current clamp sensor. In order to monitor energy saving and to control the electric facilities, it is essential and imperative to control the leak and load currents from mains and branch power lines up to the equipment. Clamp sensor is easy to carry and simple to install. Load current detection type clamp sensors provide superior characteristic in phase for the use of power meter. Rated current 1000Amp AC. 68mm conductor size. Output voltage: AC 500mV/1000A (AC 0.5mV/A). Accuracy: +/- 0.5 percent rdg +/- 0.1mV (50/60Hz), +/- 1.0 percent rdg +/- 0.2mV (40Hz to 1kHz). Phase shift within +/- 1.0 degree. Output connector: Mini-DIN 6-pin. 0 to 50 degree c temperature range. Withstand voltage: 5350V AC for 5 seconds. Approximate 3m cable length. Approximate 1 ohm output... Less

166398 Features: -Adjustable height plunge-cutting head.-Light weight precision extruded aluminum rails provide accurate and even tracking during all cutting operations.-Rails have replaceable slip-on pads to protect material surface from scratches.-Precisi on, maintenance-free bearings provide smooth and reliable tracking of the cutting head.-Replaceable dust filter.-Valve controlled water feed.-Saw comes complete with two sets of 72'' rail, rail connector plate, 12'' blade capacity cutting head, two hold-down clamps and standard garden hose water connector.-Additio nal rails for extending cutting capacity sold separately.-Saw shown with 72'' rail.-Two sets 72' rails.-Four parallel spreader brackets.-Rail connector plate.-Two hold down clamps.-Item # 166398.-Motor: Electric.-Amps:... Less

Shop for Building Materials at The Home Depot. The Zareba ground rod clamp maintains a secure connection between ground wire and ground rod. This heavy duty clamp is for use with 5/8 in. and larger ground rods. Zareba is the largest manufacturer of electric fence systems offering durable, reliable electric fence products for your entire animal fencing needs.