Category

Tools and Accessories
Results 1 - 40 of 156

Chicago Pneumatic Chipping...

$367.90 Chicago Pneumatic Chipping Hammer .580 Hex CP0012-2H 8900000103
No Shipping Info
Ohio Power Tool
/chicago-pneumatic/Go-hjXqtaE-JUOuB4HTWtQ==/info
Ohio Power Tool
( In stock )
Chicago Pneumatic Powerful, yet lightweight- designed for operator comfort. D-Handle. Inside Trigger. 2 Stroke. 3/4 x 2 Chuck Uses .580 hex shank oval collar chisels.
More

Chicago Pneumatic 4 Bolt...

$387.40 Chicago Pneumatic 4 Bolt Chipping Hammer .680 Round CP4130-3R 8900000116
No Shipping Info
Ohio Power Tool
/chicago-pneumatic-4-bolt/4LDg-CoqBbwNzJvGaXqW2g==/info
Ohio Power Tool
( In stock )
Chicago Pneumatic 3 Stroke Steel 4-bolt flange for increased durability and strength, plus ease of serviceability. Alloy steel piston, cylinder and forged handle for extra strength. D handle with outside trigger (OT). Precise teasing throttle for maximum control. Uses .680 round shank oval collar chisels.
More

Chicago Pneumatic Scabbler...

$575.25 Chicago Pneumatic Scabbler CP0066 T024412
No Shipping Info
Ohio Power Tool
/chicago-pneumatic/xoRxBziwxPJb0sGkbBG9hg==/info
Ohio Power Tool
( In stock )
Chicago Pneumatic The CP0066 Scabbler is the ideal tool for cleaning and roughing concrete and construction joints. Lightweight, compact tool with contoured grip handle - reduces operator fatigue; increases output. Tungsten carbide-tipped pistons. Length 11 inches, weight 10 lbs. Three pistons, 3000 blows per minute.
More

Chicago Pneumatic CPS 375...

$29,737.50 Chicago Pneumatic CPS 375 Portable Compressor 8972422435 Block Heater
No Shipping Info
Ohio Power Tool
/chicago-pneumatic-cps-375/FC7V69RUAtuVS2916qnJrA==/info
Ohio Power Tool
( In stock )
500 hour service interval. Large tool storage box. Unloaded starting. Torsion bar suspensions. Glow plugs. Recessed towing lights. Dual stage fuel filters with water separator.
More

Chicago Pneumatic 3/4 inch...

$338.96 Chicago Pneumatic 3/4 inch Heavy Duty Air Impact Wrench CP772H
No Shipping Info
Ohio Power Tool
/chicago-pneumatic-34/ep0LVJt5CnwRgLdLxg6erw==/info
Ohio Power Tool
( In stock )
Chicago Pneumatic Differential regulators. Improved oil bath Dyna-Pact clutch. Handle exhaust. Integral 360º air inlet swivel. Teasing throttle design for precise control. Ultimate torque: 1000 ft./lbs.
More

Chicago Pneumatic Chipping...

$387.40 Chicago Pneumatic Chipping Hammer - 4 Bolt .580 Hex 8900000117
No Shipping Info
Ohio Power Tool
/chicago-pneumatic/m6PXEx1y6MNd1z8xPyj-ZQ==/info
Ohio Power Tool
( In stock )
Chicago Pneumatic 3 Stroke Steel 4-bolt flange for increased durability and strength, plus ease of serviceability. Alloy steel piston, cylinder and forged handle for extra strength. D handle with outside trigger (OT). Precise teasing throttle for maximum control. Uses .580 hex shank oval collar chisels.
More

Ingersoll Rand 1/2 Heavy Duty...

$111.00 Ingersoll Rand 1/2 Heavy Duty Air Ratchet Wrench 1077XPA
No Shipping Info
Ohio Power Tool
/ingersoll-rand-12-heavy/1zcyV0ChdT_TgIN7qk7Ijg==/info
Ohio Power Tool
( In stock )
Ingersoll Rand 50 ft./lbs. of maximum torque. Variable speed lever style throttle. 360? adjustable exhaust directs air away from the operator and the work. 1/2 Drive
More

Chicago Pneumatic CPS 185...

$12,996.70 Chicago Pneumatic CPS 185 Deutz Portable Compressor 8972426026 CPS185-Tool Box
No Shipping Info
Ohio Power Tool
/chicago-pneumatic-cps-185/-STYgdkhxiv3qoOpqF_T1Q==/info
Ohio Power Tool
( In stock )
Guaranteed 185 CFM. Recessed single point lifting bail. Torsion bar suspension. Heavy duty tires. Folding drawbar. Three 3/4 discharge valves. Removable side panels. Fully galvanized canopy. Oil cooled Deutz engine.
More

CS Unitec Pneumatic Drive...

$5,832.00 CS Unitec Pneumatic Drive Unit Safety Twist Throttle 2 2087 0030
No Shipping Info
Ohio Power Tool
/cs-unitec-pneumatic-drive/-XaMR5dneUIQ8JlXlg8Z4A==/info
Ohio Power Tool
( In stock )
Both pneumatic and hydraulic models available Integrated torque reaction stabilizers One-year warranty Square Drive ID: 7/8 Torque Output (ft/lbs): 413 Load Speed (RPM): 20 Reversible: YES Tube Rolling Cap: 1-1/2 Motor Power (HP): 1.35 CFM at 90 PSI: 53 Height x Length: 10.9 x 26.5 Weight(lbs.): 29
More

Ingersoll Rand 1 Heavy Duty...

$449.50 Ingersoll Rand 1 Heavy Duty Extended Anvil Air Impact Wrench 285B-6
No Shipping Info
Ohio Power Tool
/ingersoll-rand-1-heavy/HYguMLn5GiSW55K9Tbo3tw==/info
Ohio Power Tool
( In stock )
Ingersoll Rand 1,450 ft./lbs. maximum torque. Superior balance, angled-down exhaust. High-efficiency 6-vane air motor. 3-Position power regulator. The new IR285B-6 combines exceptional power, durability, and operator convenience. It delivers 1,450 ft./lbs. of maximum torque, with a 5,000 rpm free speed and high efficiency, 6-vane motor.
More

Ingersoll Rand 3/8 Ultra Duty...

$138.60 Ingersoll Rand 3/8 Ultra Duty Air Ratchet Wrench 1105MAX-D3
No Shipping Info
Ohio Power Tool
/ingersoll-rand-38-ultra/SR4K4o0tqfM39oCabTKLMw==/info
Ohio Power Tool
( In stock )
Ingersoll Rand Exclusive TwinPawl Plus head design for durability and long life. Two-speed power grip ring; ergonomic textured grip. 30 ft./lbs. of maximum torque; 300 rpm.
More

Chicago Pneumatic 5 HP...

$4,462.91 Chicago Pneumatic 5 HP Single-Phase Air Compressor QRS5.0HP-1
No Shipping Info
Ohio Power Tool
/chicago-pneumatic-5-hp/C09zNdfvhNUZZ3c8eQPx0Q==/info
Ohio Power Tool
( In stock )
Chicago Pneumatic 5.0 Horsepower, 16.6 Capacity, 65-155 Operating Pressure Range. 60 Gallon Tank - 56 x 23 x 50 Quiet Operation 100% Continuous Duty Operation Compact Design in a Complete Package Simple and Low Cost Maintenance Proven Design by a World Leader in Compressor Technology Free Shipping
More

Chicago Pneumatic 7.5 HP...

$5,987.62 Chicago Pneumatic 7.5 HP 3-Phase Air Compressor With Dryer QRS7.5HPD-3
No Shipping Info
Ohio Power Tool
/chicago-pneumatic-75-hp/Vr66p7ixydxZak9VQu1YBQ==/info
Ohio Power Tool
( In stock )
Chicago Pneumatic 7.5 Horsepower, 21.2 Capacity, 65-155 Operating Pressure Range. Noise level 64, Motor Voltage 3/60/208-230-460. 60 Gallon Tank - 56 x 23 x 50 Quiet Operation 100% Continuous Duty Operation Compact Design in a Complete Package Simple and Low Cost Maintenance Proven Design by a World Leader in Compressor Technology Complete with Dryer. Free Shipping
More

CS Unitec Portable Pneumatic ...

$2,439.00 CS Unitec Portable Pneumatic Power Hacksaw 5 1212 0050
No Shipping Info
Ohio Power Tool
/cs-unitec-portable/fa55QWpothuCAmwkXRWyBA==/info
Ohio Power Tool
( In stock )
Pneumatic, electric or hydraulic motor with variable speeds. Ideal for cutting pipe, tanks, structural steel. profiles and other materials. Designed for the toughest service in refineries, chemical plants, utilities, pipelines, construction, offshore oil and demolition applications. Cut pipe up to 24 OD in one pass. Chain clams and profile clams available for accurate 90 degree cutting of pipe and structural steel. 2 3/8 stroke for heavy-duty blades up to 37 long. Ideal for cutting in confined spaces. Accommodate heavy-duty blades up to 37 long. Optional saw blade guides to increase blade stability.
More

Chicago Pneumatic Heavy Duty...

$126.00 Chicago Pneumatic Heavy Duty Die Grinder CP9111QB
No Shipping Info
Ohio Power Tool
/chicago-pneumatic-heavy/wl1OcksB0JQKn7ABimxY7w==/info
Ohio Power Tool
( In stock )
Chicago Pneumatic Composite overmold grip Powerful 0.47 HP (350W) motor Low noise level: only 80 dB(A) Variable top speed regulator Rear exhaust Includes 1/4 and 6mm collets Excellent for general high speed polishing and grinding
More

Ingersoll Rand Vibration...

$123.00 Ingersoll Rand Vibration Reduced Air Hammer - 122MAX
No Shipping Info
Ohio Power Tool
/ingersoll-rand-vibration/-clKRl1JJrS0LgsrwkfguQ==/info
Ohio Power Tool
( In stock )
Ingersoll Rand This long barrel hammer will deliver the punch you need to get the job done fast and comfortably! Great for exhaust and front-end jobs, general bolt cutting, pin driving and body shearing work. MAX Comfort - Anti-vibration feature reduces tool vibration by over 30% when compared to standard air hammers in its class, plus, an Ergonomic grip that provides comfort for extended use MAX Power - 15% increased in impact force over standard air hammers MAX Productivity - Quick-change retainer allows for faster chisel changeovers, so you can get the job done
More

Chicago Pneumatic Rivet...

$1,075.70 Chicago Pneumatic Rivet Buster 11 Open Handle CP4611P 8900000150
No Shipping Info
Ohio Power Tool
/chicago-pneumatic-rivet/1tSoIaUNOHnps8_0jRyoHg==/info
Ohio Power Tool
( In stock )
Chicago Pneumatic Rivit Buster 11 Open Handle. Auto Stop System - reduces sleeve breakage & cylinder wear. Solid Pin on Valve - eliminated valve misalignment. 1/2 Pipe Thread inlet bushing - swivel can install into bushing. Longer Piston - hit the steel but not the bridge. Retainer spring will break before cylinder.
More

Chicago Pneumatic Demolition...

$866.45 Chicago Pneumatic Demolition Tool - 60 lb. Breaker T022073
No Shipping Info
Ohio Power Tool
/chicago-pneumatic/1wbT3gqZARZkmtFr7wpmuw==/info
Ohio Power Tool
( In stock )
Chicago Pneumatic Four-bolt backhead - withstands rugged use. Heavy-duty front head springs - reduce reaction back to operator. Reversible piston, reduces maintenance cost. Air inlet swivel for easy maneuverability. 1-1/8 Hex Shank Chisels.
More

Chicago Pneumatic 30 HP...

$11,648.00 Chicago Pneumatic 30 HP Tankless Air Compressor QRS30
No Shipping Info
Ohio Power Tool
/chicago-pneumatic-30-hp/2ODy6cBoYe3RJY0A4hBaoA==/info
Ohio Power Tool
( In stock )
Chicago Pneumatic Low Sound Enclosure, 100 -175 psig, Continuous Operating Capability, Space Saving Design, <12 sq. ft., Maintenance < 15 minutes, Wye-Delta, Reduced Voltage Start, Electronic Microprocessor Control Tri-Voltage, TEFC Motor Load/No Load With Intelligent Shutdown Free Shipping
More

Chicago Pneumatic Demolition...

$804.05 Chicago Pneumatic Demolition Tool - 35 lb. Breaker CP1210 8900003001
No Shipping Info
Ohio Power Tool
/chicago-pneumatic/BFYIYwSRmFSEwSGy-mkMuA==/info
Ohio Power Tool
( In stock )
Chicago Pneumatic The brand new version of the CP1210 draws on the excellent reputation of the classic CP1210 35-pound class tool which has proven its value over a number of years. The new version has the following features: Improved swivel design for increasd maneuverablilty. Improved valve system and percussive mechanism, giving 20 percent more power. Lubrication grooves on the piston to increase wear properties of the impact mechanism. 35 pound class demolition tool. Lightweight yet rugged, designed for light-to-medium construction and plant maintenance work. These tools are very popular for bridge deck jobs. Four-bolt backhead design - withstands rugged use. Heavy-duty fronthead springs reduce reaction back to operator.
More

Ingersoll Rand Vibration...

$123.00 Ingersoll Rand Vibration Reduced Air Hammer - 118MAX
No Shipping Info
Ohio Power Tool
/ingersoll-rand-vibration/Eepcy5voK7tsU5aSW0VTqQ==/info
Ohio Power Tool
( In stock )
Ingersoll Rand This long barrel hammer will deliver the punch you need to get the job done fast and comfortably! Great for exhaust and front-end jobs, general bolt cutting, pin driving and body shearing work. MAX Comfort - Anti-vibration feature reduces tool vibration by over 30% when compared to standard air hammers in its class, plus, an Ergonomic grip that provides comfort for extended use MAX Power - 15% increased in impact force over standard air hammers MAX Productivity - Quick-change retainer allows for faster chisel changeovers, so you can get the job done
More

Chicago Pneumatic General...

$166.10 Chicago Pneumatic General Purpose Needle Scaler CP7120
No Shipping Info
Ohio Power Tool
/chicago-pneumatic-general/GNj8AdRN8MfMrIipE2qCMQ==/info
Ohio Power Tool
( In stock )
Chicago Pneumatic general purpose needle scaler. Weld flex chipping hammer. Quick change chisel retainer. Adjustable sleeve, 1/8 (19 x 3mm) steel needles and 1.37 (35mm) width chisel with high resistance to wear.
More

Chicago Pneumatic 4 HP...

$1,056.25 Chicago Pneumatic 4 HP Concrete Saw CP0044
No Shipping Info
Ohio Power Tool
/chicago-pneumatic-4-hp/JbUkfRijKm7jsOdv4xDa-Q==/info
Ohio Power Tool
( In stock )
Chicago Pneumatic The CP 0044 is a powerful tool driven by a direct drive, 4 hp motor and is designed to cut a variety of surfaces including concrete, asphalt and stone. This direct drive saw has no belts needing constant checking of tension. A built-in oiler provides continuous lubrication. The CP 0044 is also designed with safety in mind, using a standard lock-off trigger to help prevent accidental starting. Chicago Pneumatic 4 hp motor. One-hand operation blade guard. Integral oiler. Lock-off trigger. Direct drive operation. Two position handle.
More

Chicago Pneumatic LF82...

$1,501.50 Chicago Pneumatic LF82 Asphalt Plate Compactor 3382000086
No Shipping Info
Ohio Power Tool
/chicago-pneumatic-lf82/OeAqm1yXipSp3CaKcF6wbw==/info
Ohio Power Tool
( In stock )
Design for asphalt with a large capacity water tank and stainless steel sprinkler system Double sealed non-contact bearings reduces wear High centrifugal force Transport wheels makes maneuvering easy Specs Operating weight: 172 lbs Centrifugal force: 4,050 lbs Speed: 82 ft/min Plate width: 16 inches Engine: Honda H/A vibrations: 5.8 m/s²
More

CS Unitec Spitznas Pneumatic...

$1,848.00 CS Unitec Spitznas Pneumatic 1.5HP Hand Mixer 7 1112 0010
No Shipping Info
Ohio Power Tool
/cs-unitec-spitznas/cCmc2c6HqmOU0CP5njSE7w==/info
Ohio Power Tool
( In stock )
Three air-powered models are inherently safer for mixing paint, glue, mortar, concrete, refractory cement and other materials in shipyards and the oil and gas industries. They can be used around water with no fear of shock or blown circuitry. Power: 1.5 HP CFM @ 90 PSI: 49 CFM Load Speed (RPM): 0-230/200-420 Mixing Capacity: 110 lbs. Weight: 15 lbs Air Connection: 3/8 Suitable Paddles: MG 140, WG 135
More

Ingersoll Rand 3/4 Ultra Duty...

$538.05 Ingersoll Rand 3/4 Ultra Duty Air Impact Wrench Quiet 2145QiMAX
No Shipping Info
Ohio Power Tool
/ingersoll-rand-34-ultra/q3SR2L14T1ImxjDPOXGdcA==/info
Ohio Power Tool
( In stock )
Ingersoll Rand 4 power positions One hand operation forward/reverse buttons Durable and lightweight textured composite housing MAX Power 1350 ft-lb maximum reverse torque from a tool that weighs just 7.4 lbs and is compact enough to access tight spaces MAX Durability Built to last and designed to withstand tough use in rugged environments; a two-year limited warranty is standard MAX Productivity An air motor that’s 16% more efficient than its predecessor and an easy-to-clean inlet screen means less down time, better tool performance, and less money spent on compressed air
More

Chicago Pneumatic 1/4 inch...

$117.00 Chicago Pneumatic 1/4 inch Mini Air Drill CP7300
No Shipping Info
Ohio Power Tool
/chicago-pneumatic-14/rUxfV6o4W2jMsXr9SrXkqg==/info
Ohio Power Tool
( In stock )
Chicago Pneumatic General purpose non-reversible drill. Fast at 2,800 rpm. Compact and lightweight for easy handling. Ergonomic grip for comfort and control. Jacob's chuck 1/4' capacity. Planetary gearing with brass bushings for low wear and long life. Adjustable exhaust. Excellent for drilling, honing, reaming and hole sawing.
More

Chicago Pneumatic Air Hammer...

$364.56 Chicago Pneumatic Air Hammer .401 CP714
No Shipping Info
Ohio Power Tool
/chicago-pneumatic-air/w2UQRN4h8HH9DoTVttfAuQ==/info
Ohio Power Tool
( In stock )
Chicago Pneumatic Most controllable CP Hammer available. Positive action trigger for precise control over speed range. .401 chisel opening. 9/16 x 3-1/8 bore and stroke. 2000 blows per minute.
More

Chicago Pneumatic RC 920...

$7,600.00 Chicago Pneumatic RC 920 Hydraulic Compactor 182610175
No Shipping Info
Ohio Power Tool
/chicago-pneumatic-rc-920/-4OYP3tnU1K7X0GbgcnI7g==/info
Ohio Power Tool
( In stock )
Carrier Weight Class (lbs): 19,800-44,000 Service Weight: 1,940 Weight Without Adapter: 1,600 Length (in): 46.38 Width: 27.95 Height: 30.08 Baseplate Size: 27.95 x 46.38 Plate Coverage: 976.50 in² Vibrating Force (lbf): 16,094 Vibrating Frequency (n/min): 2,200 Operating Pressure (psi): 2,176 Oil Flow (gal/min): 30 Motor Oil Quantity (gal): 0.98 Sound Pressure Level dB(A): 66 Sound Power Level: 106 Port Connectors: JIC 12, 1-1/16 UNF Min. Inside Diameter of Hoses and Pipes (in): 0.79 Pipework Diameter and Wall Thickness: 0.98 x 0.01 Hole Pattern-Adaptor: RX 11, RX14
More

Chicago Pneumatic 7.5 HP...

$6,689.80 Chicago Pneumatic 7.5 HP Single-Phase Air Compressor With Dryer QRS7.5HPD-1
No Shipping Info
Ohio Power Tool
/chicago-pneumatic-75-hp/-RkS-RjHh2fE0ES4pTJRwg==/info
Ohio Power Tool
( In stock )
Chicago Pneumatic 7.5 Horsepower, 21.2 Capacity, 150 Max PSI. 60 Gallon Horizontal Tank Quiet Operation 100% Continuous Duty Operation Compact Design in a Complete Package Simple and Low Cost Maintenance Proven Design by a World Leader in Compressor Technology Complete with Dryer. Free Shipping
More

Ingersoll Rand 1/2 Super Duty...

$146.03 Ingersoll Rand 1/2 Super Duty Air Impact Wrench 231HA
No Shipping Info
Ohio Power Tool
/ingersoll-rand-12-super/06SrcvJrHusXGALqyUksNA==/info
Ohio Power Tool
( In stock )
Ingersoll Rand The IR231 is the most popular tool in its class. Durable twin hammer plus impact mechanism. Pressure-feed lubrication. Adjustable power regulator. Easy to service two-piece construction.
More

Wheeler-Rex Electric Direct...

$2,500.00 Wheeler-Rex Electric Direct Drive Triplex Plunger Pump 1000psi 220V 47101
No Shipping Info
Ohio Power Tool
/wheelerrex-electric/0Lvrb5dmU9XX-MgNyjmkKA==/info
Ohio Power Tool
( In stock )
Wheeler-Rex Electric Direct Drive Triplex Plunger Pump 1000psi 220V 47101 Automatic and precise pressure buildup Single control sets pressure, provides automatic unloading and isolates and maintains pressure Continuous pump lubrication Adjustable pressure control On two wheeled cart with pneumatic tires Inline strainer with stainless steel mesh filter and clear bowl
More

Ingersoll Rand Vibration...

$137.40 Ingersoll Rand Vibration Reduced Air Hammer Kit - 122MAXK
No Shipping Info
Ohio Power Tool
/ingersoll-rand-vibration/0vnHwMbd6Bi090xG1Y_KYA==/info
Ohio Power Tool
( In stock )
Ingersoll Rand This long barrel hammer will deliver the punch you need to get the job done fast and comfortably! Great for exhaust and front-end jobs, general bolt cutting, pin driving and body shearing work. MAX Comfort - Anti-vibration feature reduces tool vibration by over 30% when compared to standard air hammers in its class, plus, an Ergonomic grip that provides comfort for extended use MAX Power - 15% increased in impact force over standard air hammers MAX Productivity - Quick-change retainer allows for faster chisel changeovers, so you can get the job done
More

Chicago Pneumatic 1/4 Inch...

$141.60 Chicago Pneumatic 1/4 Inch Swivel Head Ratchet CP7823
No Shipping Info
Ohio Power Tool
/chicago-pneumatic-14/1zLwB8LpEVx2C-O9jGXbmw==/info
Ohio Power Tool
( In stock )
Chicago Pneumatic 15 ft/lbs of ultimate torque. 250 rpm of free speed. 4 position swivel head for easy access and maneuverability. Compact and lightweight. Fits in the palm of your hand. Rear exhaust.
More

Chicago Pneumatic MR7000...

$36,569.00 Chicago Pneumatic MR7000 Manual Start Double Drum Roller 4812099147
No Shipping Info
Ohio Power Tool
/chicago-pneumatic-mr7000/20K7auU9mhbl-Kc-zUqd1w==/info
Ohio Power Tool
( In stock )
A fully hydraulic walk behind roller with stepless forward/backward control Large 19 gallons water tank which minimizes refilling stops Hydraulic Oil-Cooling system extends operating time, longer service intervals and longer life of the machine Fold up handles makes the roller easy to transport Specs Operating weight: 1,495 lbs Centrifugal force: 4,725 lbs Speed: 2.2/1.4 mph Drum width: 26 inches Engine: Hatz H/A vibrations: 4 m/s²
More

Ingersoll Rand 3/4 Super Duty...

$468.03 Ingersoll Rand 3/4 Super Duty Air Impact Wrench 261
No Shipping Info
Ohio Power Tool
/ingersoll-rand-34-super/2Mrz4F55H8DsXspAdoTTGA==/info
Ohio Power Tool
( In stock )
Ingersoll-Rand FREE SOCKET SET WITH PURCHASE - SK6H8L Jumbo hammer mechanism. Up to 1,100 ft./lbs. of torque. Trouble-free, longer performance aided by the Pressure-Feed Lube System. Compact and only 7-5/8 long. Handle exhaust.
More

Ingersoll Rand Vibration...

$137.40 Ingersoll Rand Vibration Reduced Air Hammer Kit - 118MAXK
No Shipping Info
Ohio Power Tool
/ingersoll-rand-vibration/2mpCZhgJaieiYJj3DfR-Gw==/info
Ohio Power Tool
( In stock )
Ingersoll Rand This long barrel hammer will deliver the punch you need to get the job done fast and comfortably! Great for exhaust and front-end jobs, general bolt cutting, pin driving and body shearing work. MAX Comfort - Anti-vibration feature reduces tool vibration by over 30% when compared to standard air hammers in its class, plus, an Ergonomic grip that provides comfort for extended use MAX Power - 15% increased in impact force over standard air hammers MAX Productivity - Quick-change retainer allows for faster chisel changeovers, so you can get the job done
More

Chicago Pneumatic MV165...

$7,085.00 Chicago Pneumatic MV165 Forward and Reversible Plate 4812099142
No Shipping Info
Ohio Power Tool
/chicago-pneumatic-mv165/3M5PapHgeUUGVUhrkgarjA==/info
Ohio Power Tool
( In stock )
Speed and compaction depth are regulated Forward and reversible movement are easily controlled Engines protected by a heavy-duty frame Bottom plate is made of Hardox 400 steel Gas-powered machines have a Honda engine Specs Operating weight: 355 lbs Centrifugal force: 7,875 lbs Speed: 72 ft/min Plate width: 18 inches Engine: Honda H/A vibrations: 1.5 m/s²
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2013 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe130.rtb22.p3-13102
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe130.rtb22.p3-13102