Category

Optics Accessories
Showing results for "tms scope rings"
Results 1 - 40 of 1500+

Ar Tms Tactical Scope Rings...

$26.60
eBay Ar Tms Tactical Scope Rings 30mm 1 Picatinny Ris Srtl
Free Shipping
/ar-tms-tactical-scope/_mV1ybJwA2spMK8izTNerA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
T.M.S. PICATINNY TACTICAL SCOPE RING SET w/ACCESSORY RAIL TOP, 30MM/1INCH This ring set is for the serious shooter that wants the best in strength and ruggedness. The heavy duty rings are made of solid heat-treated aluminum alloy and are perfect for military and law enforcement uses as well. Fits Picatinny 1913 RIS rails. ( Does NOT Fit Weaver ) Works with 30 mm tube scope or 1inch tube scope using included size inserts 21mm center height. Good with up to 40mm (outside diameter) objectives Each
More

Ar Tms Heavy Duty Tactical...

$26.00
eBay Ar Tms Heavy Duty Tactical High Scope Ring Set 30mm 1 Insert Picatinny Ris Rail
+ $5.00 shipping
/ar-tms-heavy-duty/wGeGcIIbi-5YXW9SjaDIQQ==/info
eBay
IN_STOCK ( In stock )
T.M.S. PICATINNY TACTICAL SCOPE RING SET w/ACCESSORY RAIL TOP, 30MM/1INCH This ring set is for the serious shooter that wants the best in strength and ruggedness. The heavy duty rings are made of solid heat-treated aluminum alloy and are perfect for military and law enforcement uses as well. Fits Picatinny 1913 RIS rails. Works with 30 mm tube scope or 1inch tube scope using included size inserts 40mm center height(height from top of base to center of the ring). See-thru design. Ring width: 1in
More

Tms One Piece Offset 30mm...

$39.95
eBay Tms One Piece Offset 30mm Scope Mount For Picatinny Rail With 1inch Size Inserts
Free Shipping
/tms-one-piece-offset-30mm/YUg_xriIvudqy4HLrFontw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
TMS ONE PIECE OFF SET MOUNT For 1”and 30mm Scopes Buy with confidence from a trusted seller – see our FEEDBACK A heavy duty offset ring mount to install magnified optics scope for easier eye relief setup. Very helpful when mounting a scope with longer eyepiece tube, especially ones with illuminated reticles. · Ring Size: 30mm (1inch metal size inserts included) · Centerline Height - 40mm Machined from extruded aluminum alloy 6061 · Hard anodized black matte finish Clamp attachment – tw
More

Tms 1 Inch 1 See Thru Weaver...

$9.39
eBay Tms 1 Inch 1 See Thru Weaver Tall High Scope Rings For 40-50 Mm Obj Scopes
Free Shipping
/tms-1-inch-1-see-thru/ya9ltToyp74uPcGUU1IFUA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
TMS 1 inch Scope Rings (High)1X pair of 1 inch scope rings Fits Picatinny and Weaver rails and bases Made of solid aluminum alloy to withstand shock and recoil Fits 7/8 Weaver mounts, rails and bases as commonly found on rifles, pistols,Great Heavier Duty Design Works with scopes, red dot sights and flashlights with 1 main tube. High (30mm) center height. Good for mounting scopes with objective OD up to 60mm.Clamps onto Weaver base/rail and tightens using a hex screw Fits Both Weaver and Pica
More

Tms 1inch 1 See Thru Weaver...

$12.90
eBay Tms 1inch 1 See Thru Weaver Tall High Scope Rings 7/8 Th Silver Chrome
Free Shipping
/tms-1inch-1-see-thru/cVqR1iT47MBQm-aVaUuevg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
1inch See Thru Weaver High Scope Rings 7/8 TH SILVER Buy with confidence from a trusted seller – see our FEEDBACK For sale is a pair of Silver chrome finish 1inch scope rings for 7/8 Weaver rails and bases Made of solid aluminum alloy to withstand shock and recoil. Fits 7/8 Weaver mounts, rails and bases as commonly found on rifles, pistols, and some crossbows. Works with scopes, red dot sights and flashlights with 1 main tube. High (30mm) center height. Good for mounting scopes with obje
More

Tms One Piece Offset 30mm...

$26.80
eBay Tms One Piece Offset 30mm Scope Mount With Accessory Rails Picatinny Weaver Base
Free Shipping
/tms-one-piece-offset-30mm/elocJQ8YETimDR-bFLQ7IA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
An one piece offset scope mount to install magnified long riflescope of 30mm tube for easier eye relief setup. Very helpful when mounting a scope with longer eyepiece tube. Integral rings have accessory rail built in on top and on the sides for mounting additional accessories such as laser sight, flashlight or backup sight. Ring Size: 30mm Centerline Height - 35mm Machined from extruded aluminum alloy 6061 Anodized black matte finish Clamp attachment – two hex nuts Saddle Height (from top of
More

Tms One Piece Offset 1inch...

$26.80
eBay Tms One Piece Offset 1inch Scope Mount W/ Accessory Rails Picatinny Weaver Base
Free Shipping
/tms-one-piece-offset/p8qpeN1cpssJJqm4whAjwQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
An one piece offset scope mount to install magnified long riflescope of 1inch tube for easier eye relief setup. Very helpful when mounting a scope with longer eyepiece tube. Integral rings have accessory rail built in on top and on the sides for mounting additional accessories such as laser sight, flashlight or backup sight. Integral Ring Size: 1inch Centerline Height - 31mm Machined from extruded aluminum alloy 6061 Anodized black matte finish Clamp attachment – two hex nuts Saddle Height (f
More

Tms Shotgun Red Dot Scope...

$36.90
eBay Tms Shotgun Red Dot Scope Mount W/ Picatinny Top Trail 12ga 870 1100 & 1187
Free Shipping
/tms-shotgun-red-dot-scope/rg2iwlMCG64_QZkCw7Bpzg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
TMS SHOTGUN SADDLE SCOPE MOUNT FOR 12GA 870 1100 1187 SHOTGUNS Buy with confidence from a trusted seller – see our FEEDBACK A well made high quality shotgun saddle scope mount for Remington 12GA 870, 1100 1187 Shotguns Works with full size scopes and red dot sights with standard Weaver or Picatinny rings or mount. Great for slug shooting or turkey hunting or tactical shotgun use Easy to install in existing pin ports on the receiver - no gunsmith or special tools required Solid one piece desig
More

Tms Flat Top High One Piece...

$29.80
eBay Tms Flat Top High One Piece Offset Double Ring Mount Picatinny 30mm 1inch
Free Shipping
/tms-flat-top-high-one/NEZcvkOJ6C6zDnoeVG-hiQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
One Piece Offset Double Ring Mount Picatinny 30mm 1in Buy with confidence from a trusted seller – see our FEEDBACK One piece body Design for better scope alignment. two integral 30mm rings with 1 size inserts (installed as shown in picture) offset design to better work with scope eye relief center height: 1.58 (40mm); Good for Magnified optics scopes with objective lens size up to 60mm ring width: 0.62 Openning between rings: 2.16 attaches TO flat top rails, Picatinny . locks firmly in pla
More

TMS One Piece Offset 1inch...

$24.99
Sears TMS One Piece Offset 1inch Scope Mount
No Shipping Info
/tms-one-piece-offset/QJ3DnlsvXvY0T64frnem4A==/info
Sears
IN_STOCK ( In stock )
TMS One Piece Offset 1inch Scope Mount w/ Accessory Rails Picatinny Weaver Base
More

TMS One Piece Offset 30mm & 1...

$29.99
Sears TMS One Piece Offset 30mm & 1 Scope Mount for Picatinny Rails
No Shipping Info
/tms-one-piece-offset-30mm/_9BSuWky00dJlWVAx2Ja5g==/info
Sears
IN_STOCK ( In stock )
TMS ONE PIECE OFF SET MOUNT For 1 and 30mm Scopes.
More

Scope Ring Alignment Lap - 1...

$67.99
Brownells Scope Ring Alignment Lap - 1 Alignment Lap
+ $15.95 shipping
/scope-ring-alignment-lap/b9BVzIdaYs9ZOOK3trmCTw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Helps prevent dinged and damaged scope tubes by removing high spots to quickly true misaligned or out-of-round scope rings so they're perfectly in line. Also works to turn-in and rough align rotary dovetail rings. Dual-handles with multiple, transverse, lapping compound grooves give complete control and fast results. Includes lapping compound. Mfg: Brownells SPECS: Mild steel, in-the-white. 12 (30cm) long, 1 (2.5cm) or 30mm (1.187) dia. Includes (2) plastic handles and instructions.
More

TMS One Piece Offset 30mm...

$59.99
Sears TMS One Piece Offset 30mm Scope Mount w/ 1inch inserts Picatinny QD Cam Locks
No Shipping Info
/tms-one-piece-offset-30mm/lsQvnychak8AoOqEUdUTgQ==/info
Sears
IN_STOCK ( In stock )
TMS One Piece Offset 30mm Scope Mount w/ 1inch inserts Picatinny QD Cam Locks
More

Wheeler Engineering Scope...

$61.99
MidwayUSA Wheeler Engineering Scope Ring Alignment and Lapping Kit
No Shipping Info
/wheeler-engineering-scope/CYZ-fZJsFVd75UoNW9Po1A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This kit improves scope mounting two ways. First, the short bars let you know when the front ring is in perfect alignment with the rear one. Second, lapping the inside of the scope rings will reduce or eliminate any shifting of the scope inside the rings and will also remove machining marks that can scratch the finish on the scope. This is State-of-the-Art scope mounting and will provide you with confidence that the job has been done right. The kit included 2 alignment rods, lapping rod with handle (8 steel shaft, plastic ball handle) and 1 oz jar of 220 grit high quality silicon carbide lapping compound. Properly aligned rings create more surface contact with the scope tube to keep scopes in place during heavy recoil. Misaligned rings cause stress on the scope tube, which can dent the... Less
More

Wheeler Scope Ring Alignment...

$54.69
Walmart.com Wheeler Scope Ring Alignment & Lapping Kit
Free Shipping
/wheeler-scope-ring/A_rAeD0JfMi6lf0ohKU3Ag==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The Wheeler Ring Alignment and Lapping Kit should become the standard practice whenever a scope is installed on a quality firearm.
More

Wheeler Engineering Scope...

$45.99
MidwayUSA Wheeler Engineering Scope Ring Alignment and Lapping Kit 1
+ $8.39 shipping
/wheeler-engineering-scope/wjMiFu2zo6e-pccknannDw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This kit improves scope mounting two ways. First, the short bars let you know when the front ring is in perfect alignment with the rear one. Second, lapping the inside of the scope rings will reduce or eliminate any shifting of the scope inside the rings and will also remove machining marks that can scratch the finish on the scope. This is State-of-the-Art scope mounting and will provide you with confidence that the job has been done right. The kit included 2 alignment rods, lapping rod with handle (8 steel shaft, plastic ball handle) and 1 oz jar of 220 grit high quality silicon carbide lapping compound. Properly aligned rings create more surface contact with the scope tube to keep scopes in place during heavy recoil. Misaligned rings cause stress on the scope tube, which can dent the... Less
More

Sinclair Scope Ring Lapping...

$79.99
Brownells Sinclair Scope Ring Lapping Kits - Sinclair Lapping Tool Combo Kit
+ $15.95 shipping
/sinclair-scope-ring/hNcf0emGwjAAfX0PR0gscQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Unfortunately, all bases, rings, and actions are not manufactured in perfect alignment with each other. Whether you have a one-piece or two-piece base, the odds are against you that your rings will be in perfect alignment. Why chance putting your scope in a bind,whether it is a $200 scope or a $1000+ scope? The Sinclair Scope Ring Lapping Tools are designed to correct the misalignment of scope rings. The Sinclair Scope Ring Lapping Tool is used to align the rings first and then to remove just enough metal from the scope ring bearing surface to fine tune the alignment. Misaligned rings actually cause your scope's main tube to bend, causing distortion and requiring you to use excessive a Mfg: Sinclair International
More

Wheeler Engineering Scope...

$44.99
MidwayUSA Wheeler Engineering Scope Ring Alignment and Lapping Kit 30mm
+ $9.59 shipping
/wheeler-engineering-scope/bvIPrcK4xCSW4lgLW3tGkw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This kit improves scope mounting two ways. First, the short bars let you know when the front ring is in perfect alignment with the rear one. Second, lapping the inside of the scope rings will reduce or eliminate any shifting of the scope inside the rings and will also remove machining marks that can scratch the finish on the scope. This is State-of-the-Art scope mounting and will provide you with confidence that the job has been done right. The kit included 2 alignment rods, lapping rod with handle (8 steel shaft, plastic ball handle) and 1 oz jar of 220 grit high quality silicon carbide lapping compound. Properly aligned rings create more surface contact with the scope tube to keep scopes in place during heavy recoil. Misaligned rings cause stress on the scope tube, which can dent the... Less
More

Super 9 Scope Ring 1 Diameter

$9.99
AirSplat Super 9 Scope Ring 1 Diameter
No Shipping Info
/super-9-scope-ring-1/lqOJMmjQBOdsCAqo-vYWCQ==/info
AirSplat
IN_STOCK ( In stock )
Super 9 Scope Ring 1 Diameter - Pair of 1 Inch Scope Rings for Super 9. Compatible with any scope with 1 tube diameter: NC Star 4x32 Airgun Scope and 2 - 6 X 28 Compact Rifle Scope. Great Add-on for Super 9 Airsoft Rifle.
More

Sinclair Scope Ring Lapping...

$49.99
Brownells Sinclair Scope Ring Lapping Kits - Sinclair 30mm Scope Ring Lapping Tool
+ $15.95 shipping
/sinclair-scope-ring/WfMzqZsrqm4HVkiWuXBZyw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Unfortunately, all bases, rings, and actions are not manufactured in perfect alignment with each other. Whether you have a one-piece or two-piece base, the odds are against you that your rings will be in perfect alignment. Why chance putting your scope in a bind,whether it is a $200 scope or a $1000+ scope? The Sinclair Scope Ring Lapping Tools are designed to correct the misalignment of scope rings. The Sinclair Scope Ring Lapping Tool is used to align the rings first and then to remove just enough metal from the scope ring bearing surface to fine tune the alignment. Misaligned rings actually cause your scope's main tube to bend, causing distortion and requiring you to use excessive a Mfg: Sinclair International
More

Tms 90 Degree Push Button...

$46.00
eBay Tms 90 Degree Push Button Quick Flip To Side Fts Mount For 30mm Magnifier Scope
Free Shipping
/tms-90-degree-push-button/XNqd5MMFBIpYBl-Oy7qa7A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
TMS 90 degree Quick Flip2Side Mount for 30mm Magnifier Buy with confidence from a trusted seller – see our FEEDBACK A great add-on to tactical red dot sighting system. The quick flip to the side mount, when working with a magnifier scope of 30mm tube, converts non-magnifying red dot sight instantly into a sighting system for longer range targeting and sniping. The flip-to-the-side mount when side release button is pushed rotates to stay on and off line of sight quickly. It is locked in place
More

Tms 3x Magnifier Scope W/...

$89.90
eBay Tms 3x Magnifier Scope W/ 90degree Fts Flip To Side Mount For Red Dot Sight 36mm
Free Shipping
/tms-3x-magnifier-scope-w/R8n7736Dt6NtedvLRPQfdg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
A great add-on to tactical red dot sights. The kit works great with most EOTech sights of standard height. The 3x magnifier converts a red dot sight instantly into a sighting system for longer range targeting and sniping. Sometimes the combined use of red dot sight and magnifier scope will have the dot reticle out of center in the field of view of the magnifier due to slight misalignment of optical axis between the sight and the magnifier. This TMS magnifier scope is adjustable for windage and
More

Sinclair Scope Ring Lapping...

$46.99
Brownells Sinclair Scope Ring Lapping Kits - Sinclair 1 Scope Ring Lapping Tool
+ $7.95 shipping
/sinclair-scope-ring/fmTxuibzYV1zkfEGC9amyw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Unfortunately, all bases, rings, and actions are not manufactured in perfect alignment with each other. Whether you have a one-piece or two-piece base, the odds are against you that your rings will be in perfect alignment. Why chance putting your scope in a bind,whether it is a $200 scope or a $1000+ scope? The Sinclair Scope Ring Lapping Tools are designed to correct the misalignment of scope rings. The Sinclair Scope Ring Lapping Tool is used to align the rings first and then to remove just enough metal from the scope ring bearing surface to fine tune the alignment. Misaligned rings actually cause your scope's main tube to bend, causing distortion and requiring you to use excessive a Mfg: Sinclair International
More

Orion Guide Scope Ring...

$24.99
Orion Telescopes Orion Guide Scope Ring Mounting Bar
+ $9.95 shipping
/orion-guide-scope-ring/cTxZ6UYgjW63j_3dhYCINA==/info
Orion Telescopes
IN_STOCK ( In stock )
Rigid, 16 long anodized aluminum bar for coupling guide scope and guide scope rings to a telescope. Multiple holes allow guide scope rings to be positioned for short or long-tube guide scopes. Pre-drilled through-holes allow easy attachment to SkyView Pro, Sirius and Atlas telescopes and mounts.
More

Tms 90 Degree Quick Flip To...

$39.90
eBay Tms 90 Degree Quick Flip To Side Fts Mount For 30mm Magnifier Scope 36mm Height
Free Shipping
/tms-90-degree-quick-flip/D9j8-b93LNa801NRp0cvKA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
A great add-on to tactical red dot sighting system. The quick flip to the side mount, when working with a magnifier scope of 30mm tube, converts non-magnifying red dot sight instantly into a sighting system for longer range targeting and sniping. The flip-to-the-side mount when side release button is pushed rotates to stay on and off line of sight quickly. It is locked in place at both ON and OFF positions. A simple push will unlock it. You need to be sure the center height of the mount matches
More

Talley 1 Quick Detachable...

$117.99
MidwayUSA Talley 1 Quick Detachable Scope Rings With Lever
No Shipping Info
/talley-1-quick-detachable/XftRX7tm_X7NL8OR5vwOxQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
CNC machined for precise tolerances, this ring system provides repeatability and flexibility by allowing you to remove and replace your scope with the confidence it will return to zero. Great when traveling and when venturing out on that once in a lifetime hunt, you can carry a spare scope already sighted in and ready to go as a back-up! Offered with a Lever Lock or a Screw Lock to remove and replace. Works only with Talley bases. Stainless Steel. Technical Information Material: Steel Ring Diameter: 1 Height Low: 0.300 Medium: 0.400 High: 0.500 Extra-High: 0.700 Rings lock with a lever verses torx screws. Mounting hardware included. Ring Height Selection (per Talley) Low for scopes up to 44mm objective with standard barrel contour Medium for scopes up to 50mm objective with standard... Less
More

Tsr 7075 Aluminum Scope Rings...

$69.99
Brownells Tsr 7075 Aluminum Scope Rings - Tsr Aluminum Rings 1 Medium
+ $7.95 shipping
/tsr-7075-aluminum-scope/4BZdNLvCcglOzbIHqLwzEw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
TSR Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. Mfg: Tps Products, Llc. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8 (15.8mm) wide. Height measured from top of base to center of ring. 30mm - High: 1.225 (31.1mm).
More

Tsr 7075 Aluminum Scope Rings...

$69.99
Brownells Tsr 7075 Aluminum Scope Rings - Tsr Aluminum Rings 1 Low
+ $7.95 shipping
/tsr-7075-aluminum-scope/CI2qnylbkHR1ouE3ziqh_g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
TSR Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. Mfg: Tps Products, Llc. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8 (15.8mm) wide. Height measured from top of base to center of ring. 30mm - High: 1.225 (31.1mm).
More

Talley 30mm Quick Detachable...

$117.99
MidwayUSA Talley 30mm Quick Detachable Scope Rings With Lever
No Shipping Info
/talley-30mm-quick/rPSDue07scJgAXiyiYZD5Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
CNC machined for precise tolerances, this ring system provides repeatability and flexibility by allowing you to remove and replace your scope with the confidence it will return to zero. Great when traveling and when venturing out on that once in a lifetime hunt, you can carry a spare scope already sighted in and ready to go as a back-up! Offered with a Lever Lock or a Screw Lock to remove and replace. Works only with Talley bases. Matte. Technical Information Material: Steel Ring Diameter: 30mm Height Low: 0.300 Medium: 0.400 High: 0.500 Extra-High: 0.700 Rings lock with a lever verses torx screws. Mounting hardware included. Ring Height Selection (per Talley) Low for scopes up to 44mm objective with standard barrel contour Medium for scopes up to 50mm objective with standard barrel... Less
More

Tms Ar 3x Magnifier Scope W/...

$89.90
eBay Tms Ar 3x Magnifier Scope W/ 90 Degree Fts Flip To Side Mount For Red Dot Sight
Free Shipping
/tms-ar-3x-magnifier-scope/NUHP1KhDwdw-YUx69-E9iw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
A great add-on to tactical red dot sights. The 3x magnifier converts a red dot sight instantly into a sighting system for longer range targeting and sniping. Sometimes the combination use of red dot sight and magnifier scope will have the dot reticle out
More

Talley 1 Quick Detachable...

$89.99
MidwayUSA Talley 1 Quick Detachable Scope Rings With Screw Lock
No Shipping Info
/talley-1-quick-detachable/uWYGweU4x4I76gHf-snRKg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
CNC machined for precise tolerances, this ring system provides repeatability and flexibility by allowing you to remove and replace your scope with the confidence it will return to zero. Great when traveling and when venturing out on that once in a lifetime hunt, you can carry a spare scope already sighted in and ready to go as a back-up! Offered with a Lever Lock or a Screw Lock to remove and replace. Works only with Talley bases. Matte. Technical Information Material: Steel Ring Diameter: 1 Height Low: 0.300 Medium: 0.400 High: 0.500 Extra-High: 0.700 Rings lock with a torx head screw instead of a lever. Mounting hardware included. Ring Height Selection (per Talley) Low for scopes up to 44mm objective with standard barrel contour Medium for scopes up to 50mm objective with standard... Less
More

Tsr 7075 Aluminum Scope Rings...

$79.99
Brownells Tsr 7075 Aluminum Scope Rings - Tsr Aluminum Rings 30mm Low
+ $7.95 shipping
/tsr-7075-aluminum-scope/MOVFydQ4Iad4ybs02q5wMg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
TSR Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. Mfg: Tps Products, Llc. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8 (15.8mm) wide. Height measured from top of base to center of ring. 30mm - High: 1.225 (31.1mm).
More

Wheeler Scope Ring Alignment...

$58.18
eBay Wheeler Scope Ring Alignment & Lapping Kit, 1 And 30mm
+ $16.37 shipping
/wheeler-scope-ring/o1CEItffFe9fBbXpy7hF8w==/info
eBay
IN_STOCK ( In stock )
Wheeler Scope Ring Alignment Lapping Kit 1 30mm 305172 Aligning and lapping of new rings should become the standard practice whenever a scope is installed on a quality firearm. The alignment bars in this kit provide for perfect alignment of both rings and will also diagnose any misalignment problem, vertical or horizontal, giving you the opportunity to fix the problem before damaging the scope or experiencing frustration at the range.The lapping bar is used to lap the rings to improve alignmen
More

UTG 1 Intergral Quick Detach...

$31.99
AirSplat UTG 1 Intergral Quick Detach Scope Ring
No Shipping Info
/utg-1-intergral-quick/HhGeGiZ4SDNmVohGugzTkw==/info
AirSplat
IN_STOCK ( In stock )
UTG 1 Integral QD Scope Ring Mount Medium Height - Integrated Ring Top Picatinny Rail - Precision Machined From Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish - Robust and User Friendly Ergonomic Quick Detach/Lock Lever Fully Adjustable
More

Tsr 7075 Aluminum Scope Rings...

$79.99
Brownells Tsr 7075 Aluminum Scope Rings - Tsr Aluminum Rings 30mm High
+ $7.95 shipping
/tsr-7075-aluminum-scope/byEmXr6VrpwA2kN4EpQBaQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
TSR Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. Mfg: Tps Products, Llc. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8 (15.8mm) wide. Height measured from top of base to center of ring. 30mm - High: 1.225 (31.1mm).
More

Talley 1 Quick Detachable...

$117.99
MidwayUSA Talley 1 Quick Detachable Scope Rings With Lever Matte Low
+ $3.99 shipping
/talley-1-quick-detachable/DGo-ymvtW5CTnCXb_ufKpw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
CNC machined for precise tolerances, this ring system provides repeatability and flexibility by allowing you to remove and replace your scope with the confidence it will return to zero. Great when traveling and when venturing out on that once in a lifetime hunt, you can carry a spare scope already sighted in and ready to go as a back-up! Offered with a Lever Lock or a Screw Lock to remove and replace. Works only with Talley bases. Stainless Steel. Technical Information Material: Steel Ring Diameter: 1 Height Low: 0.300 Medium: 0.400 High: 0.500 Extra-High: 0.700 Rings lock with a lever verses torx screws. Mounting hardware included. Ring Height Selection (per Talley) Low for scopes up to 44mm objective with standard barrel contour Medium for scopes up to 50mm objective with standard... Less
More

Tsr-W Steel Alloy Scope Rings...

$79.99
Brownells Tsr-W Steel Alloy Scope Rings - Tsr w Series Steel Rings 30mm Low
+ $7.95 shipping
/tsrw-steel-alloy-scope/7IteyWOYKHTtSpsHct5h1g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
TSR W Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases. Mfg: Tps Products, Llc. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8 (15.8mm) wide. Height measured from top of base to center of ring. 30mm - Low: .925 (23.5mm).
More

Talley 1 Quick Detachable...

$89.99
MidwayUSA Talley 1 Quick Detachable Scope Rings With Screw Lock Matte Medium
+ $3.99 shipping
/talley-1-quick-detachable/c5MD4hgpkQ3wOfWfHL2abQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
CNC machined for precise tolerances, this ring system provides repeatability and flexibility by allowing you to remove and replace your scope with the confidence it will return to zero. Great when traveling and when venturing out on that once in a lifetime hunt, you can carry a spare scope already sighted in and ready to go as a back-up! Offered with a Lever Lock or a Screw Lock to remove and replace. Works only with Talley bases. Matte. Technical Information Material: Steel Ring Diameter: 1 Height Low: 0.300 Medium: 0.400 High: 0.500 Extra-High: 0.700 Rings lock with a torx head screw instead of a lever. Mounting hardware included. Ring Height Selection (per Talley) Low for scopes up to 44mm objective with standard barrel contour Medium for scopes up to 50mm objective with standard... Less
More

Tsr-W Steel Alloy Scope Rings...

$79.99
Brownells Tsr-W Steel Alloy Scope Rings - Tsr w Series Steel Rings 30mm Medium
+ $7.95 shipping
/tsrw-steel-alloy-scope/f1AEY54OlvdIckKB5BeFwg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
TSR W Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases. Mfg: Tps Products, Llc. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8 (15.8mm) wide. Height measured from top of base to center of ring. 30mm - Low: .925 (23.5mm).
More

Talley 1 Quick Detachable...

$89.99
MidwayUSA Talley 1 Quick Detachable Scope Rings With Screw Lock Matte Low
+ $3.99 shipping
/talley-1-quick-detachable/gduJhw9Rm0aqbECnmmsSJw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
CNC machined for precise tolerances, this ring system provides repeatability and flexibility by allowing you to remove and replace your scope with the confidence it will return to zero. Great when traveling and when venturing out on that once in a lifetime hunt, you can carry a spare scope already sighted in and ready to go as a back-up! Offered with a Lever Lock or a Screw Lock to remove and replace. Works only with Talley bases. Matte. Technical Information Material: Steel Ring Diameter: 1 Height Low: 0.300 Medium: 0.400 High: 0.500 Extra-High: 0.700 Rings lock with a torx head screw instead of a lever. Mounting hardware included. Ring Height Selection (per Talley) Low for scopes up to 44mm objective with standard barrel contour Medium for scopes up to 50mm objective with standard... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2014 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145