repair kit for 217 tilt trim motor BMW, Mercruiser, Volvo Penta Replaces Prestolite ERH 4102

Boat / Motor / PWC Boat Covers Boat Fenders Cleaning Supplies Clothing & Apparel Control & Steering Cables Dock & Mooring Electrical Electronics & Instrumentation Engine Parts Fishing Fuel Tanks & Systems Galley General Boating Hardware Interior Leisure & Fun Stuff Lubricants Maintenance & Paint Plumbing Propellers Safety Sporting Goods:Water Sports:Other > Tilt And Trim Motor Tilt And Trim Motor Manufacturer: SIERRA-TELEFLEX Mfg Part Number: Tilt And Trim Motor for Johnson and Evinrude Outboard Engines. Newer 2 wire design for most 3 , 4 , 6 , and 8 cyl applications 1982 to present. Motor Only. Replaces 394176 , 391264 , 393988 , 985237 .

TILTING WORK TABLE Places material at an ergonomically correct level, reducing fatigue and risk of injury. Tilt angle and platform height are easily adjusted using friction screw placing containers and parts at a comfortable position. Powder coated steel construction with lip edge on platform to retain load. Four 4" diameter polyurethane swivel casters (2 with brake and swivel lock) allow unit to be transported fully loaded from one workstation to another.

This base is constructed of heavy duty powder coated aluminum for weather resistance and structural integrity. Patented single action handle for ease of operations. Table legs interlock for compact storage. Two adjustable leg levelers. Accommodates Grosfillex 24 Square, 30 Round, and 24x32 table tops (all sold separately). 2-year manufacturer warranty. Black finish. 30"W x 30"D x 27-1/2"H overall. 30.13 L. 25.00 W. 5.00 H.

Models: MERCURY Marine 0/B 1996-ON TILT & TRIM All Models 135 H.P. 1996-ON TILT & TRIM All Models 150 H.P. 1996-ON TILT & TRIM All Models 150 H.P. 1996-ON TILT & TRIM All Models 175 H.P. 1996-ON TILT & TRIM All Models 200 H.P. 1996-ON TILT & TRIM All Models 225 H.P. Also Fits 150XRG MAG III Mercury / Mariner Jet 105-140HP Note: 2-Wire Connection (Bullet Connector Ends) Reference Numbers: API MARINE PT486NM ARCO MARINE 6250 Mercury Marine 828708, 878265A1, 878265A4

Boat / Motor / PWC Boat Covers Boat Fenders Cleaning Supplies Clothing & Apparel Control & Steering Cables Dock & Mooring Electrical Electronics & Instrumentation Engine Parts Fishing Fuel Tanks & Systems Galley General Boating Hardware Interior Leisure & Fun Stuff Sporting Goods > Water Sports > Other > Tilt And Trim Motor Tilt And Trim Motor Manufacturer: SIERRA-TELEFLEX Mfg Part Number: 18-6273-1 Tilt and Trim Motor for Mercury and Mariner Outboard engines. High performance cartridge pump with replacable motor. Fits on 35 - 220 hp 1985 - 1993 with Design I, 3 Ram, 3 Wire units with side fill reservoir.

Boat / Motor / PWC Boat Covers Boat Fenders Cleaning Supplies Clothing & Apparel Control & Steering Cables Dock & Mooring Electrical Electronics & Instrumentation Engine Parts Fishing Fuel Tanks & Systems Galley General Boating Hardware Interior Leisure & Fun Stuff Lubricants Maintenance & Paint Plumbing Propellers Safety Sporting Goods:Water Sports:Other > Tilt and Trim Motor Tilt and Trim Motor Manufacturer: SIERRA-TELEFLEX Mfg Part Number: Tilt and Trim Motor for OMC and Volvo Drive systems. Used on 1990 Cobra and 1994 King Cobra trim systems. Volvo SX , DPS , DP , and DPX drives. Replaces OE 986280 , 3853945 .

Applications: YAMAHA Marine TILT & TRIM All Models 40-100 H.P. 1995- 2003Specification s:Voltage: 12 VoltsRotation: ReversibleField Hsg OD: 63.6mm / 2.504inOverall Length: 120.4mm / 4.740inShaft OD: 7.9mm / 0.311inShaft Notes: 4mm X 8mm Drive TangApproximate Weight: 2.68 lbs / 1.22 kgNotes: FOR YAMAHA 40-100HP 1995-20032-WIRE CONNECTION (RING TERMINAL ENDS)3-BOLT MOUNTReplaces these part numbers:API MARINE PT611NMARCO MARINE 6266LESTER 10833MALLORY 9-18401REMY SMALL MOTOR RT05042YAMAHA 62X43880-00, 62X-43880-00, 62X43880-01, 62X-43880-01, 62X43880-09, 62X-43880-09

Make your conference rooms versatile with Virco's Text Series Tilt-Top Table. Use the tables in a flat position during the day or for special events and then fold them down for cleaning and storage. Arched feet provide a modern look. Easily rearrange tables or move them from room to room on four casters. Two people are required to fold these tilt-top tables up and down. Choose the laminate and frame color that matches your decor.

Product Categories Anchor Boat / Motor / PWC Boat Covers Boat Fenders Cleaning Supplies Clothing Apparel Control Steering Cables Dock Mooring Electrical Electronics Instrumentation Engine Parts Fishing Fuel Tanks Systems Galley General Boating Hardware Interior Leisure Fun Stuff Lubricants Maintenance Paint Plumbing Propellers Safety Seating Trailer Ventilation Watersports Winterization Other Sporting Goods:Water Sports:Other Tilt And Trim Motor Tilt And Trim Motor Manufacturer: SIERRA-TELEFLEX

Panther Trim & Tilt Model 55... a rugged Trim & Tilt for pontoons and other boats! The compact Trim & Tilt Model 55 conveniently matches outboards from 15 to 55hp weighing up to 250 pounds. Perfectly designed for pontoons, fishing, or pleasure boats, the Trim & Tilt provides an additional five degrees of negative tuck for improved hole shot. Adapts to clamp on or bolt-through outboards. Mounting hardware not included. Get yours today! Panther Trim & Tilt Model 55

Product Categories Anchor Boat / Motor / PWC Boat Covers Boat Fenders Cleaning Supplies Clothing Apparel Control Steering Cables Dock Mooring Electrical Electronics Instrumentation Engine Parts Fishing Fuel Tanks Systems Galley General Boating Hardware Interior Leisure Fun Stuff Lubricants Maintenance Paint Plumbing Propellers Safety Seating Trailer Ventilation Watersports Winterization Other Sporting Goods:Water Sports:Other Tilt And Trim Motor Tilt And Trim Motor Manufacturer: SIERRA-TELEFLEX

This base is constructed of heavy duty powder coated aluminum for weather resistance and structural integrity. Patented single action handle for ease of operations. Table legs interlock for compact storage. Two adjustable leg levelers. Accommodates Grosfillex 48x32 table tops without umbrella hole (all sold separately). 2-year manufacturer warranty. Black finish. 42"W x 33"D x 27-1/2"H overall. 40.50 L. 29.75 W. 5.00 H.

This tilt top base has a heavy duty powder coated aluminum construction for weather resistance and structural integrity. Includes patented single action handle for ease of operations. Table legs interlock for compact storage, two adjustable leg leveler. Accommodates Grosfillex 32 square, 36 Square, and 36 round table tops (all sold separately). 2-year manufacturer warranty. Silver Gray finish. 33"W x 33"D x 27-1/2"H overall. 30.13 L. 25.00 W. 5.00 H.

This is a Brand New Tilt/Trim Motor for Yamaha Models: 1997-On Yamaha 115HP 2000-On Yamaha 115HP 4-Stroke 1997 Yamaha 130HP 1998 Yamaha 130HP 1999 Yamaha 130HP 2000 Yamaha 130HP 1997-On Yamaha 150-200HP 1998-On Yamaha 225HP Replaces: Yamaha 64E-43880-00-00, 64E-43880-01-00 Type Starter Mfr Tilt Motor Voltage 12 Note: 2-Wire Connection 4-Bolt Mount Ring Terminal Ends

High back executive chair with deep button-tufted back cushions. Provides look of elegance with traditional styling. Large 27" nylon base for greater stability. Hooded double wheel casters. Upright locking position. Pneumatic gas lift seat height adjustment. Adjustable tilt tension control. Comes standard with knee-tilt mechanism. Burgundy finish. Black frame. 27"W x 27"D x 43 - 47"H overall. 29.50 L. 26.00 W. 14.50 H.

%100 NEW AFTERMARKET TILT TRIM MOTOR 12 VOLT 2-WIRE CONNECTION (BULLET CONNECTOR ENDS) 1 2 RAM TRIM/TILT SYSTEMS W/YELLOW PLUG USED ON: FORCE 40-125 HP 1-2 RAM SYSTEMS MERCURY 40-125 HP 1-RAM SYSTEM REPLACES: MERCURY MARINE 809885T2 ONE YEAR WARRANTY NO CORE NEEDED FOR INQUIRIES PLEASE CLICK ON ASK A QUESTION LOCATED AT TOP RIGHT SIDE OF LISTING RETURN POLICY: ITEMS UNDER WARRANTY ARE EXCHANGED. BUYER IS RESPONSIBLE FOR WARRANTY RETURN SHIPPING EXPENSES. RETURNED ITEMS ARE SUBJECT TO 20% SHIPPI

Cmc Marine Power Tilt/trim With Gauge . Raises and lowers outboards with the touch of a switch to achieve better performance. It has 20 of trim and a total of 90 of trim and tilt. Pop up on a plane faster, and achieve better performance underway as load and water conditions change. You get a more stable ride, increased top end speed, and better fuel efficiency. The 6" setback enhances boat stability because the increased clearance enables the prop to get a better bite at higher prop settings. Durable 6061 T6 aluminum throughout, a self-contained hydraulic power unit, and 2" dia. hydraulic cylinder rated at 7,800lb. of thrust. Completely sealed and submersible. Rated for 10hp 130hp engines, and pre drilled to fit standard B.I.A. hole. Comes with or without a dash-mount position indicator,... Less

TILT/TRIM MOTOR replaces OMC 391264, 393259, 393988, 394176, and 983019, Bosch motor, two wire connection. Most OMC outbosrd applications 1982 to present.

This is a Brand New Tilt/Trim Motor for Yamaha Models: 2001 F50 2002 F50 2003 F50 2004 F50 2002 F60 2003 F60 2004 F60 2001 40TLR 2002 40TLR 2003 40TLR 2004 40TLR 2005 40TLR 2006 40TLR 2003 50TLR 2004 50TLR 2005 50TLR 2006 50TLR 2007 50TLR 2008 50TLR 2009 50TLR Shaft Approximately 1.5 Inch From Oil Seal to Flat Blade. Used on 2-Stroke & 4-Stroke Applications. Replaces: API MARINE PT614NM Yamaha CS3-43880-00-00, 62Y-43880-01-00, 69W-43880-09-00 12 Volt, 2-Wire Motor

Outboard Tilt Steering Kit. For Virtually All Of Today'S Ob'S With Wheels Up To 16'' Diameter. Single Cable: For Most Boats. Dual Cable: For Boats With Engine Flutter Or Steering Instability. Replaces Teleflex Safe-T Steering Systems Without Dash Modification. For Single Station Use Only. Patented No Feedback Steering Mechanism. Comfortable 4.2 Turns From Lock-To-Lock. Minimal Clutch-Free Play. Standard 3/4'' Tapered Steering Shaft. Stainless Steel Cable Output Ends. Fast, Easy Installation. Meets Abyc Standards, Nmma Certification Requirements. Uses Ssc62 Replacement Cables.

Mayline CSII Smart Design. Work surfaces with 1-1/8'' high pressure laminate with PVC T-mold and 3mm edging. Pencil stop standard in work surface. Top may be positioned from 0 degrees to 60 degrees. Choice of many widths to choose from. Meets or exceeds all ANSI-BIFMA standards. Choose from many laminate, t-mold, and paint finishes.

Features adjustable clamp to hold work and table top tilts from horizontal to 90 degrees for optimal adjustability. Removable ledge prevents items from sliding off the table. Large table can accommodate some wheelchairs.

All-inclusive, built-in comfort means that the Chadwick Tilt Stop Control Chair user is unconsciously aware of the support features designed into the chair, yet receives all the benefits. Active Suspension™ with tilt tension and height adjustment are standard on the chair. The optional Lumbar is cleverly designed to attach to the chair with magnets, making it simple to retrofit and enabling numerous adjustability options. Also available with Casters or Glides (optional and sold separately).This sustainable design is manufactured using clean technology in keeping with the ecodesign principles of reduce, reuse and recycle. Greenguard Certified, Chadwick meets the U.S. Green Building Council's LEED™ requirements. Uses minimum materials in construction and employs clean manufacturing... Less

This is a Brand New Tilt/Trim Motor for Force and Volvo Penta Models: Force Marine Tilt/Trim Motors 1986 All Models 85-150 HP 1987 All Models 85-150 HP 1988 All Models 85-150 HP 1989 All Models 85-150 HP 1990 All Models 85-150 HP 1991 All Models 85-150 HP Volvo Penta Marine Tilt/Trim Motors 1986 All Models 85-150 HP 1987 All Models 85-150 HP 1988 All Models 85-150 HP 1989 All Models 85-150 HP 1990 All Models 85-150 HP 1991 All Models 85-150 HP Replaces: API Marine PT116N Arco Marine Force 820545, F694541-1, F694541-2 Remy Small Motor RT05012 OEM: Volvo Voltage: 12V Field Housing OD: 74.7 mm / 2.941 in

Boat Covers Boat Fenders Cleaning Supplies Clothing & Apparel Control & Steering Cables Dock & Mooring Electrical Electronics & Instrumentation Engine Parts Fishing Fuel Tanks & Systems Galley General Boating Hardware Interior Leisure & Fun Stuff Lubricants Maintenance & Paint Plumbing Propellers Watersports Winterization Other Sporting Goods:Water Sports:Other > Tilt And Trim Reservoir Tilt And Trim Reservoir Manufacturer: SIERRA-TELEFLEX Mfg Part Number:

%100 NEW AFTERMARKET TILT TRIM MOTOR 12 VOLT 2-WIRE CONNECTION (BULLET CONNECTOR ENDS) 1 2 RAM TRIM/TILT SYSTEMS W/YELLOW PLUG USED ON: FORCE 40-125 HP 1-2 RAM SYSTEMS MERCURY 40-125 HP 1-RAM SYSTEM REPLACES: MERCURY MARINE 809885A1, 809885A2, 809885T2, 813447, 819479A1, 819480A1, 885654T1 10827 ONE YEAR WARRANTY NO CORE NEEDED FOR INQUIRIES PLEASE CLICK ON ASK A QUESTION LOCATED AT TOP RIGHT SIDE OF LISTING RETURN POLICY: ITEMS UNDER WARRANTY ARE EXCHANGED. BUYER IS RESPONSIBLE FOR WARRANTY RE

This is a Brand New Aftermarket Tilt/Trim Motor Fits Yamaha Models: Note: 2-Wire Configuration, Does Not Include 3-Wire Harness Adapter Yamaha Marine 1986 Tilt & Trim All Models 115-200 H.P. 1987 Tilt & Trim All Models 115-200 H.P. 1988 Tilt & Trim All Models 115-200 H.P. 1989 Tilt & Trim All Models 115-200 H.P. 1990 Tilt & Trim All Models 115-200 H.P. 1991 Tilt & Trim All Models 115-200 H.P. 1992 Tilt & Trim All Models 115-200 H.P. 1993 Tilt & Trim All Models 115-200 H.P. 1994 Tilt & Trim All Models 115-200 H.P. 1995 Tilt & Trim All Models 115-200 H.P. Replaces: Arco Marine6265 Remy Small MotorRT05006 Sierra Marine18-6760 Yamaha6G5-43880-02 OEM(s): Yamaha Voltage: 12 Rotation: Reversible Field Hsg OD: 64mm / 2.52in Overall Length: 130mm / 5.118in Shaft OD: 8mm / 0.315in Shaft... Less

Applications: JOHNSON/EVINRUDE Most 3, 4, 6 & 8 cylinder app. 1982 to present EVINRUDE Marine TILT & TRIM All Models Various 1981-1992 JOHNSON Marine TILT & TRIM All Models Various 1981-1992 OMC Marine TILT & TRIM All Models Various 1981-1992 SEA-DRIVE Marine TILT & TRIM All Models Various 1981-1992 Replaces Part Numbers: ARCO 6220 OMC Evinrude/Johnson 391264, 393259, 393988, 394176, 395840, 434795, 435548, 437666, 983019, 985237 SIERRA 18-6759 Prestolite 40-478, 40-496, PMW4001, PMW4002, PWM4002 OEM(s): Prestolite Voltage: 12 Rotation: Reversible Field Hsg OD: 64mm / 2.520in Overall Length: 132.1mm / 5.201in Shaft OD: 8mm / 0.315in Shaft Notes: Tanged Shaft Approximate Weight: 3.35 lbs / 1.52 kg Notes: Includes 8 Foot Long 2-Wire Harness With Split... Less

Make your conference rooms versatile with Virco's Text Series Tilt-Top Table. Use the tables in a flat position during the day or for special events and then fold them down for cleaning and storage. Arched feet provide a modern look. Easily rearrange tables or move them from room to room on four casters. Two people are required to fold these tilt-top tables up and down. Choose the laminate and frame color that matches your decor.