tenergy 05

Tenergy has proved to be an outstanding success, combining High Tension Technology with Spring Sponge. Tenergy has risen to the top of the charts; now there is further development which maintains high performance levels with greater control. Tenergy 05-FX combines High Tension Technololy with a softer version of Spring Sponge.

This is the first rubber to feature Butterfly's new Spring Sponge. Spring Sponge feels hard yet its new technology allows it to hold the ball on the racket longer. Tenergy 05 combines this new explosive sponge with a new tensioned topsheet with maximum surface grip. The result is a rubber that produces massive amounts of spin on serves and topspin drives. Tenergy is also one of the fastest most explosive rubbers in our line, all without the use of any speed-glues or tuning. Tenergy will keep its speed throught the life of the rubber without need for any special treatments.

Tenergy has proved to be an outstanding success, combining High Tension Technology with Spring Sponge. Tenergy has risen to the top of the charts; now there is further development which maintains high performance levels with greater control. Tenergy 05-FX combines High Tension Technololy with a softer version of Spring Sponge.

Smart Universal Charger (for NiMH / NiCd Battery pack 7.2V - 12V) with charging current Selection Features:Best Charger for charging all RC Car, RC Airplane and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V. Universal for any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells pack) Fast charger with current switch to select either, 0.9A and 1.8A. Delivers full charge within 1 - 2 hours.Charging Current 0.9A for battery packs with capacity from 900mAh -1800mAh. Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours.Smart Charger with automatic voltage detection.Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life. Red LED will be on during charging... Less

Cylindrical Li-Ion rechargeable cell with internal protection circuit module. High energy density and lower weight compared to other rechargeable cells. Internal PCM protection prevents under voltage at 2.5V and over voltage at 4.25V. Up to 500 cycles.* Manufactured under ISO9001-2000 for quality assurance. Charge Cut-off Voltage: 4.2V Discharge Cut-off Voltage: 2.75V Charge Current: Standard: 0.2C Rapid: 0.5C Minimum Capacity: 2500mAh Maximum Discharge: 0.5C Standard Discharge: 0.2 C Over Charge Protection: Over Charge Detection Voltage: 4.325±0.0 5V Over Charge Release Voltage: 4.125±0.1 0V Over Discharge Protection: Over Discharge Detection Voltage: 2.5±0.10V Over Discharge Release Voltage: 2.9±0.10V Rated Discharge Current: 3.5A Over Current... Less

Built with 6 Tenergy 5000mAh Sub C Racing Cells.No cell memory effect. No need to fully discharge before recharging. Tamiya High Speed Connector All Cells Matched and ZappedFits with popular standard 7.2V RC cars like Traxxas, LOSI, Associated, HPI, Tamiya, Kyosho, etc.Technical Specifications Standard Dimension136mm x 47.5mm x 24.5mm, fits all RC10 cars Weight455g Capacity5000 mAh Voltage7.2V Single Cell Discharge Platform1. 24VConnectorStand ard DeansLooking for the same pack with a Tamiya Connector? Click HEREThis pack works excellent in the following RC vehicles:Traxxas Stampede Associated RC10 B4 Losi XXX BK2 Yokomo MR-4TC Duratrax Evader BXTraxxas Rustler Associated RC10 T4 Losi XXX-4 GT Yokomo D1 Duratrax Evader TX Traxxas 4-Tec Associated TC4 Losi XXX-T MF2 ... Less

.red {color#F00;font-we ightbold;} Features Intelligent charger designed for 12 cell LiFePO4 battery packs. Built-in cooling fan to ensure charger long service life. Safety protection Over Voltage ProtectionShort Circuit ProtectionOutput Reverse ProtectionChargin g time Charging Time= (1.41 * Ah rate of the pack) / 2.5A charge currentBuilt-in IC to cut-off power automatically when battery is fully charged. LED indicators LED 1 = Red = Power OnLED 2 = Red = ChargingLED 3 = Green = Fully ChargedUser Instructions: Check the output plug of this charger and make sure it is not loose.Before charging, please connect the charger's alligator clips to battery firstthe red clip connects to the POSITIVE pole and the black connects to the NEGATIVE pole. After, connect the input power plug to the... Less

Untitled Document PRODUCT SEACH: Search Titles Descriptions Visit my eBay store Add this store to favorites Tenergy Intelligent 2.5A Charger for 18.5V 5S Li-ion / Li-Polymer Battery Pack Specifications Description This listing includes: 1 x Tenergy Intelligent 2.5A Charger for 18.5V 5S Li-ion / Li-Polymer Battery Pack Specification: Input: 100V-240V /50-60Hz AC Power Standard USA AC power plug. For other country's Plug adapters, click here Patented 4 Stage charge algorithm guarantee 100% Protec

Card/Kit: Tenergy 4 Pcs RCR123A 3.0V 900mAh Rechargeable Li-Ion Protected Batteries with 1 Smart Charger 110v-240v wall plug and 12v cigarette lighter plug -- included Product Features - Battery Charger: 1 Charger : for worldwide usage. Auto AC power adju

Single cell Lithium Polymer 900mAh battery. 10C continuous discharge rate of9 amps with 13.5 amps bursts in accordance with our Real Flight Rating method. Dimensions57mm x 25mm x 6.2mm Weight20 grams Please see our Real Flight Rating method that describes more specific use of burst discharge rates with our Li-Poly cells. Recommend to use Cell Shield for 2-6 Series connected packs or LiPo Shield for 1-12 series connected packs to prevent the packs from over discharge. A group of paralleled cells can be treated as one single cell.