Taurus 608 Scope Mount Electronics Optics Accessories - Shopping.com

Category

Optics Accessories
Showing results for "taurus 608 scope mount"
Results 1 - 40 of 1500+

Taurus Weaver-Style Scope...

$53.99
MidwayUSA Taurus Weaver-Style Scope Mount Model 608/44 Blued with 8-3/8 Barrel
+ $4.99 shipping
/taurus-weaverstyle-scope/GdL6CGfFRM1CWx8aDlK94A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weaver-style bases accept any Weaver-style ring. Bases may have more than one cross-slot to offer multiple position options for the ring. These steel bases are designed to allow for the mounting of almost any type of scope, red dot sight or other optical sight to your firearm. Searches for products like these typically include: Optics,Scope Bases & Mounts,Taurus,Taur us 608
More

Nikon M-223 XR Scope Mount

$70.60
Walmart.com Nikon M-223 XR Scope Mount
Free Shipping
/nikon-m223-xr-scope-mount/gUVywNNUa5ireti_alZB5w==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Developed specifically for the M-223 series of scopes, this special mount fits Picatinny rails found atop most flattop ARs. Lightweight alloy construction, with built-in 20-MOA, maximizes elevation for extreme long range shooting.
More

Wheeler Engineering Scope...

$89.99
MidwayUSA Wheeler Engineering Scope Mounting Kit 1
+ $13.19 shipping
/wheeler-engineering-scope/PV3aHjqDZGluuq2hTmowuA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Everything required for a scope mounting project with professional results. Kit contains Alignment Rods, Lapping Bar with Handle, Lapping Compound, Level-Level-Level, Thread Locker, FAT wrench with bits, and hard case. Wheeler Engineering FAT Wrench: A hand driven, click/clutch style torque wrench that is very useful for applying the necessary torque to most firearm and firearm accessory fasteners. The FAT Wrench features a thick ergonomic handle, a standard 1/4 drive tip, and can be used to apply torque from 10 to 65 in-lbs at 5 in-lb increments. Common uses include, but are not limited to; installation of scope ring and base screws, action screws and trigger guard screws. With proper care and use, the FAT Wrench will provide a lifetime of reliable service. Includes 9 bits and a square... Less
More

Wheeler Engineering Scope...

$104.99
MidwayUSA Wheeler Engineering Scope Mounting Combo Kit 1 and 30mm
+ $12.99 shipping
/wheeler-engineering-scope/h9TKY4LCScP-s75gInAKCg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Everything required for a scope mounting project with professional results. Kit contains Alignment Rods, Lapping Bar with Handle, Lapping Compound, Level-Level-Level, Thread Locker, FAT wrench with bits, and hard storagecase. Wheeler Engineering FAT Wrench: A hand driven, click/clutch style torque wrench that is very useful for applying the necessary torque to most firearm and firearm accessory fasteners. The FAT Wrench features a thick ergonomic handle, a standard 1/4 drive tip, and can be used to apply torque from 10 to 65 in-lbs at 5 in-lb increments. Common uses include, but are not limited to; installation of scope ring and base screws, action screws and trigger guard screws. With proper care and use, the FAT Wrench will provide a lifetime of reliable service. Includes 9 bits and a... Less
More

Burris AR-PEPR Scope Mount,...

$91.53
Walmart.com Burris AR-PEPR Scope Mount, 34mm 20 MOA Matte Picatinny Tops
Free Shipping
/burris-arpepr-scope/_ZbSQLj-XEjg2kh7TUIfOg==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The Burris AR-P.E.P.R. Scope Mount allows for full-sized scopes to be properly positioned on ARs with Picatinny rail uppers. It's uniquely designed to offer up to 2 of forward scope positioning for optimum eye relief and full field of view. Rings are offered smooth or Picatinny rail-topped for additional accessories. The 34mm scope mount offers 20 MOA cant. No matter how long or large your optic, it will put it in the right. The Burris scope mount is built versatile and rock solid and will enhance the look of your piece while providing a performance that you can count on. It is night hunting friendly, formidable black and keeps your anti-glare needs at the optimum. The scope mount is simple to install, so you can begin using it without missing any action. Try this combination with your... Less
More

Weaver Deluxe Scope Mounting...

$114.99
MidwayUSA Weaver Deluxe Scope Mounting Kit with 1 Lapping Tools
+ $11.59 shipping
/weaver-deluxe-scope/RdPpFExTIZl_jIUk79rAXA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Scope mounting kit from Weaver has everything you could want when mounting that new scope, or changing out optics. The Deluxe scope mounting kit comes with 1 lapping tool and ring alignment pins. This precision mounting kit is packed full of quality Weaver products that will help you get your favorite scope mounted fast and accurately. Includes Torque wrench (10 bits) Surethread adhesive Modular Scope level system Lapping bar Lapping compound Rings alignment pins Rugged storage case Searches for products like these typically include: Optics,Scope Mounting Tools,Wrenches, Alignment Kits & Other Tools,Alignment Kits
More

Armasight Scope Mounting...

$105.99
Sportsman's Guide Armasight Scope Mounting System 6 #44 for CO - MR and CO - Mini
+ $15.99 shipping
/armasight-scope-mounting/7xVmYPLVSzlwnJs5WgwK5Q==/info
Sportsman's Guide
IN_STOCK ( In stock )
Armasight Scope Mounting System 6 #44 lets you pair up your Armasight CO - MR or CO - Mini Night Vision device to your daylight scope with an objective diameter of 62mm. Armasight Scope Mounting System 6 #44 attaches the Armasight CO-MR or CO-Mini Clip-On Day / Night System directly onto the front bell of ANY day-time scope with objective diameter of 62mm (for example, the Zeiss 3-12 x 56, Swarovski 2.5-10 x 56, and Kahles CSX 3-12 x 56).Compatible with the following Armasight units:CO-MR GEN 2+ SD CO-MR GEN 2+ ID MG CO-MR GEN 2+ HD CO-MR GEN 2+ QS MG CO-Mini GEN 2+ HD CO-Mini GEN 2+ QS CO-Mini GEN 2+ QS MG CO-MR GEN 3 Bravo CO-MR GEN 3 Alpha CO-MR GEN 3P CO-MR GEN 3 Ghost MG CO-Mini GEN 3 Bravo CO-Mini GEN 3+ Alpha CO-Mini GEN 3+ Alpha MG CO-Mini GEN 3P MG CO-Mini GEN 3 Ghost MG CO-Mini... Less
More

XS Lever Scout Scope Mount...

$63.90
MidwayUSA XS Lever Scout Scope Mount Weaver-Style Marlin 444P, 1895 Matte
Free Shipping
/xs-lever-scout-scope/MLDrKIEo161ksPJWa3iWaA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
These Weaver-Style aluminum scope mounts feature a hard anodized surface and drop-in installation that uses the rear sight dovetail and front receiver screw holes. Matte Technical InformationMateri al: Anodized aluminum Finish: matte black Features: Allows forward mounting of Scout scopes or red dot sights. Gunsmithing Required: No Notes: Installs using rear dovetail and front receiver screw holes. Searches for products like these typically include: Optics,Scope Bases & Mounts,Marlin,Marl in 1895,1-Piece
More

Aero Precision Ultralight...

$89.99
Brownells Aero Precision Ultralight Extended Scope Mounts - Ultralight 1 Extended Scope Mount Black
+ $7.95 shipping
/aero-precision-ultralight/NEq7TnkKD4cXkPOR0Jxi-g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Featuring a rigid, lightweight design, Aero Precisions' Ultralight Extended Scope Mounts complement many high-end optic platforms. These scope mounts are designed to fit Mil-Spec 1913 Picatinny rails with a cross-slot keyway that offers excellent recoil protection. The Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry. Rear ring is pushed forward 1 for better eye relief Designed for AR type upper receivers 6061 T6 extruded aluminum construction Rigid and lightweight Weight: 3.07oz Mfg: Aero Precision
More

ProMag SKS Picatinny Rail...

$29.99
MidwayUSA ProMag SKS Picatinny Rail Scope Mount Steel
+ $4.99 shipping
/promag-sks-picatinny-rail/hkIFzZ0dA9pE1dk6bN5-xw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Promag SKS scope mount rail attaches to the left side of the SKS receiver and provides a solid optics mounting platform. The 5.375 Picatinny-style rail is raised for full use of iron sights with scope and mount in place. The lightweight unit mounts via 4 allen-head screws (included) and is finished in matte black. Technical Information: Installation requires the receiver to be drilled and tapped using a #28 drill and an 8-40 tap Drill and Tap not included Searches for products like these typically include: Optics,Scope Bases & Mounts,Picatinny-S tyle Universal Mounts
More

Armasight Scope Mounting...

$105.99
Sportsman's Guide Armasight Scope Mounting System 4 #43 for CO - MR and CO - Mini
+ $15.99 shipping
/armasight-scope-mounting/PNqbs2i_fbe-t69F9Ls45w==/info
Sportsman's Guide
IN_STOCK ( In stock )
Armasight Scope Mounting System 4 #43 lets you pair up your Armasight CO - MR or CO - Mini Night Vision device to your daylight scope with objective diameters between 56mm and 58.7mm. Armasight Scope Mounting System 4 #43 attaches the Armasight CO-MR or CO-Mini Clip-On Day / Night System directly onto the front bell of ANY day-time scope with objective diameters between 56mm and 58.7mm (like the Zeiss 2.5 10 x 50, Schmidt & Bender 3-12 x 50, Leupold 4.4-14 x 50, or Leupold VX-III 3.5-10 x 50).Compatible with the following Armasight units:CO-MR GEN 2+ SD CO-MR GEN 2+ ID MG CO-MR GEN 2+ HD CO-MR GEN 2+ QS MG CO-Mini GEN 2+ HD CO-Mini GEN 2+ QS CO-Mini GEN 2+ QS MG CO-MR GEN 3 Bravo CO-MR GEN 3 Alpha CO-MR GEN 3P CO-MR GEN 3 Ghost MG CO-Mini GEN 3 Bravo CO-Mini GEN 3+ Alpha CO-Mini GEN 3+... Less
More

Talley Lightweight 2-Piece...

$46.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Remington 7 Matte Low
+ $4.99 shipping
/talley-lightweight/36i5rtEsYOtdtWe24nW10w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: AluminumRing Height: from bottom of ring opening to rifle receiverLow: .400Medium: .500High: .600Notes: Includes attachment screws and allen wrench Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 7,Mounting Systems
More

Talley Lightweight 1-Piece...

$54.99
MidwayUSA Talley Lightweight 1-Piece Scope Mount with Integral 1 Rings Traditions Matte Medium
+ $4.99 shipping
/talley-lightweight/2-LYSniy7BMAgZb4fd2EkA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Aluminum mounts are lightweight and sturdy, with integral rings that create a seamless link between scope and firearm. Attachment screws and Allen wrench included. Technical InformationMateri al: AluminumRing Height: (from bottom of ring opening to rifle receiver) Low: .400Medium: .500High: .600Notes: Includes attachment screws and allen wrench Searches for products like these typically include: Optics,Scope Bases & Mounts, Traditions,All Traditions In-Line & Bolt Action Rifles
More

Aero Precision Ultralight...

$89.99
Brownells Aero Precision Ultralight Extended Scope Mounts - Ultralight 30mm Extended Scope Mount Black
+ $7.95 shipping
/aero-precision-ultralight/ZACsRBJ8i4L9Lhxa_KZmtg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Featuring a rigid, lightweight design, Aero Precisions' Ultralight Extended Scope Mounts complement many high-end optic platforms. These scope mounts are designed to fit Mil-Spec 1913 Picatinny rails with a cross-slot keyway that offers excellent recoil protection. The Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry. Rear ring is pushed forward 1 for better eye relief Designed for AR type upper receivers 6061 T6 extruded aluminum construction Rigid and lightweight Weight: 3.07oz Mfg: Aero Precision
More

Talley Lightweight 2-Piece...

$58.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Browning X-Bolt Silver Medium
+ $4.99 shipping
/talley-lightweight/49KbNBiBFuwXY4C22mSO6A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Height: from bottom of scope tube to receiver Low: Front 0.43, Rear 0.51 Medium: Front 0.53, Rear 0.61 High: Front 0.63, Rear 0.71 Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Searches for products like these typically include: Optics,Scope Bases & Mounts,Browning, Browning X-Bolt
More

TRUGLO Tactical 1-Piece Scope...

$56.99
MidwayUSA TRUGLO Tactical 1-Piece Scope Mount Picatinny-Style with Integral 1 High Rings Matte
+ $4.99 shipping
/truglo-tactical-1piece/AVd0eDawOpiCpi9eom6bDQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This high quality riser from TRUGLO is designed for mounting 1 tube scopes on a Picatinny rail. It is made to raise your accessory or optic by 1.5 which can be very helpful when mounting a scope on an AR style rifle. Integral recoil lug and reversible design make this mount a great choice for your 1 scope. Technical Information Material: Aircraft grade aluminum hardcoated to Mil. Specs. Height: 1.5 Fits any Picatinny-style rail Searches for products like these typically include: Optics,Scope Bases & Mounts,AR-15,Flatt op
More

Talley Lightweight 2-Piece...

$58.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Browning X-Bolt Silver High
+ $4.99 shipping
/talley-lightweight/RSX0ww5QjJSMRJUxHzdgDA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Height: from bottom of scope tube to receiver Low: Front 0.43, Rear 0.51 Medium: Front 0.53, Rear 0.61 High: Front 0.63, Rear 0.71 Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Searches for products like these typically include: Optics,Scope Bases & Mounts,Browning, Browning X-Bolt
More

Armasight Scope Mounting...

$105.99
Sportsman's Guide Armasight Scope Mounting System 3 #42 for CO - MR and CO - Mini
+ $15.99 shipping
/armasight-scope-mounting/YES8SGNtzKnLf6YsdshVrw==/info
Sportsman's Guide
IN_STOCK ( In stock )
Armasight Scope Mounting System 3 #42 lets you pair up your Armasight CO - MR or CO - Mini Night Vision device to your daylight scope with objective diameters between 42mm and 50mm. Armasight Scope Mounting System 3 #42 attaches the Armasight CO-MR or CO-Mini Clip-On Day / Night System directly onto the front bell of ANY day-time scope with objective diameters between 42mm and 50mm (like the Leupold 3.5-10 x 40, Zeiss 1.5-6 x 42, Swarovski PV-N 2.5-10 x 42, or Meopta Artemis 3000 3-9 x 42).Compatible with the following Armasight units:CO-MR GEN 2+ SD CO-MR GEN 2+ ID MG CO-MR GEN 2+ HD CO-MR GEN 2+ QS MG CO-Mini GEN 2+ HD CO-Mini GEN 2+ QS CO-Mini GEN 2+ QS MG CO-MR GEN 3 Bravo CO-MR GEN 3 Alpha CO-MR GEN 3P CO-MR GEN 3 Ghost MG CO-Mini GEN 3 Bravo CO-Mini GEN 3+ Alpha CO-Mini GEN 3+ Alpha... Less
More

Talley Lightweight 2-Piece...

$46.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Remington 7 Matte Medium
+ $4.99 shipping
/talley-lightweight/hd5cZDnyBWqwtuvM5eqKUA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: AluminumRing Height: from bottom of ring opening to rifle receiverLow: .400Medium: .500High: .600Notes: Includes attachment screws and allen wrench Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 7,Mounting Systems
More

Talley Lightweight 2-Piece...

$58.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Browning X-Bolt Silver Low
+ $4.99 shipping
/talley-lightweight/mb56t-KAMEbb1WpHplJTbQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Height: from bottom of scope tube to receiver Low: Front 0.43, Rear 0.51 Medium: Front 0.53, Rear 0.61 High: Front 0.63, Rear 0.71 Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Searches for products like these typically include: Optics,Scope Bases & Mounts,Browning, Browning X-Bolt
More

Talley Lightweight 2-Piece...

$46.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Remington 7 Matte Low
+ $4.99 shipping
/talley-lightweight/BHly5NoAix7eguoFCWEoVg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: AluminumRing Height: from bottom of ring opening to rifle receiverLow: .400Medium: .500High: .600Notes: Includes attachment screws and allen wrench Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 7,Mounting Systems
More

DNZ Hunt Master 2-Piece Scope...

$50.95
MidwayUSA DNZ Hunt Master 2-Piece Scope Mounts with Integral 1 Rings Browning X-Bolt Matte Medium
+ $4.99 shipping
/dnz-hunt-master-2piece/3hvLOvVxv2-UKUDQ4CKUkQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Signature Series DNZ Huntmasters 2-piece Scope Mount is precision machined from solid block 6061 T6 aluminum for an extremely rugged mount that weigh approxamatley 1/3 of steel ring base combos. These easy to install ring mounts require no special tools and provide a rock solid mounting platform with hardened grade eight screws with up to 4x more threads than competing products. This system eliminated the need for selecting a ring and base separate that can loosen over time under the recoil of modern firearms. The Hunt Master series is a solid mount that will will hold true while looking great atop your rifle. Technical Information Material: 6061 T6 Aluminum Ring Height:(measured from base of ring to bottom of scope tube) Low: .480 Medium: .605 High: .687 Notes Integral scope rings... Less
More

Armasight Scope Mounting...

$95.99
Sportsman's Guide Armasight Scope Mounting System 1 #40 for CO - MR or CO - Mini
+ $13.99 shipping
/armasight-scope-mounting/qHB-pNqri1e_bzPbKIC7cw==/info
Sportsman's Guide
IN_STOCK ( In stock )
Armasight Scope Mounting System 1 #40 lets you pair up your Armasight CO - MR or CO - Mini Night Vision device to your daylight scope with objective diameters between 25.4mm and 30mm. Armasight Scope Mounting System 1 #40 attaches the Armasight CO-MR or CO-Mini Clip-On Day / Night System directly onto the front bell of ANY day-time scope with objective diameters between 25.4mm and 30mm (like the Leupold 1.5-5x20 PR, Leupold 1.5-5x20 MR / T M2, or Zeiss 1.1-4x24T). Compatible with the following Armasight units:CO-MR GEN 2+ SD CO-MR GEN 2+ ID MG CO-MR GEN 2+ HD CO-MR GEN 2+ QS MG CO-Mini GEN 2+ HD CO-Mini GEN 2+ QS CO-Mini GEN 2+ QS MG CO-MR GEN 3 Bravo CO-MR GEN 3 Alpha CO-MR GEN 3P CO-MR GEN 3 Ghost MG CO-Mini GEN 3 Bravo CO-Mini GEN 3+ Alpha CO-Mini GEN 3+ Alpha MG CO-Mini GEN 3P MG... Less
More

Talley Lightweight 2-Piece...

$58.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Browning X-Bolt Matte High
+ $4.99 shipping
/talley-lightweight/Wxor86P8o9CV7YzSzKELNw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Height: from bottom of scope tube to receiver Low: Front 0.43, Rear 0.51 Medium: Front 0.53, Rear 0.61 High: Front 0.63, Rear 0.71 Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Searches for products like these typically include: Optics,Scope Bases & Mounts,Browning, Browning X-Bolt
More

DNZ Hunt Master 2-Piece Scope...

$50.95
MidwayUSA DNZ Hunt Master 2-Piece Scope Mounts with Integral 1 Rings Browning X-Bolt Matte Low
+ $4.99 shipping
/dnz-hunt-master-2piece/d9jQyDke0PO4eYWENgBqiQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Signature Series DNZ Huntmasters 2-piece Scope Mount is precision machined from solid block 6061 T6 aluminum for an extremely rugged mount that weigh approxamatley 1/3 of steel ring base combos. These easy to install ring mounts require no special tools and provide a rock solid mounting platform with hardened grade eight screws with up to 4x more threads than competing products. This system eliminated the need for selecting a ring and base separate that can loosen over time under the recoil of modern firearms. The Hunt Master series is a solid mount that will will hold true while looking great atop your rifle. Technical Information Material: 6061 T6 Aluminum Ring Height:(measured from base of ring to bottom of scope tube) Low: .480 Medium: .605 High: .687 Notes Integral scope rings... Less
More

Talley Lightweight 2-Piece...

$58.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Browning X-Bolt Silver Medium
+ $4.99 shipping
/talley-lightweight/g_F8j886hFPP1BaGz_5EKw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Height: from bottom of scope tube to receiver Low: Front 0.43, Rear 0.51 Medium: Front 0.53, Rear 0.61 High: Front 0.63, Rear 0.71 Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Searches for products like these typically include: Optics,Scope Bases & Mounts,Browning, Browning X-Bolt
More

DNZ Hunt Master 2-Piece Scope...

$66.95
MidwayUSA DNZ Hunt Master 2-Piece Scope Mounts with Integral 30mm Rings Browning X-Bolt Matte High
+ $4.99 shipping
/dnz-hunt-master-2piece/xCwKTffubiacdnykT8po4g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Signature Series DNZ Huntmasters 2-piece Scope Mount is precision machined from solid block 6061 T6 aluminum for an extremely rugged mount that weigh approxamatley 1/3 of steel ring base combos. These easy to install ring mounts require no special tools and provide a rock solid mounting platform with hardened grade eight screws with up to 4x more threads than competing products. This system eliminated the need for selecting a ring and base separate that can loosen over time under the recoil of modern firearms. The Hunt Master series is a solid mount that will will hold true while looking great atop your rifle. Technical Information Material: 6061 T6 Aluminum Ring Height:(measured from base of ring to bottom of scope tube) Low: .480 Medium: .605 High: .687 Notes Integral scope rings... Less
More

Talley Lightweight 2-Piece...

$46.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Extended Front Remington 7 Matte Medium
+ $4.99 shipping
/talley-lightweight/ygVPFvuPuAFmxtSSmNyGfQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: AluminumRing Height: from bottom of ring opening to rifle receiverLow: .400Medium: .500High: .600Notes: Includes attachment screws and allen wrench Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 7,Mounting Systems
More

Choate Sks Scope Mount -...

$40.99
Brownells Choate Sks Scope Mount - Steel Sks Scope Mount
+ $7.95 shipping
/choate-sks-scope-mount/B92OUJymVVA-wgOmeCCK0w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
This SKS scope mount from Choate is investment cast out of 4140 Steel. Once installed you can continue to clean you SKS as normal without removing the mount. Mount has enough height to retain use of the open sights. Will require gunsmithing to install. Includes four 8-40 screws. Drill and tapping of the receiver is required. Mfg: Choate SPECS: Includes four (4) 8-40 screws. Hole spacing: 3 center-to-center between the outer mounting holes and 2 between the inner mounting holes.
More

Talley Lightweight 2-Piece...

$46.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Cooper 22 Matte Low
+ $4.99 shipping
/talley-lightweight/3GAlBtbtQlliNYZBlD2BnA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: Aluminum Ring Height: from bottom of ring opening to rifle receiver Low: .400 Medium: .500 Notes: Includes attachment screws and allen wrench Searches for products like these typically include: Optics,Scope Bases & Mounts,Cooper,Coop er 22,2-Piece,Rear & Front Sets
More

Arsenal, Inc. Optimized...

$119.99
MidwayUSA Arsenal, Inc. Optimized Picatinny-Style Scope Mount AK-47, AK-74 Side Rail Matte
+ $4.99 shipping
/arsenal-inc-optimized/4bSx9SWLZi_b44VAyFgGSw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Finally, a repeatable quick-release picatinny rail scope mount for your AK variant! The KV-04S features an adjustable locking mechanism that attaches securely to all military- standard AK side rails, and allows for easy removal and reattachment without tools or loss of zero. The 5.25-inch Picatinny rail section is centered over the bore axis, and can be reversed by the user for compatibility with hinged AK dust covers. The rail section and mount body are machined from aluminum alloy, with steel locking mechanism parts. Weighs just 7.7 ounces.This is the must-have item if you are looking to mount a scope to your AK variant in the most accurate and solid way possible. The KV-04S AK Scope mount provides a rigid platform with a Picatinny rail system (the standardized mounting platform for... Less
More

Talley Lightweight 2-Piece...

$46.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Cooper 22 Matte Medium
+ $4.99 shipping
/talley-lightweight/BmH0ig9z6zbge1R2dF2eVA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: Aluminum Ring Height: from bottom of ring opening to rifle receiver Low: .400 Medium: .500 Notes: Includes attachment screws and allen wrench Searches for products like these typically include: Optics,Scope Bases & Mounts,Cooper,Coop er 22,2-Piece,Rear & Front Sets
More

Talley Lightweight 2-Piece...

$58.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Browning X-Bolt Matte Medium
+ $4.99 shipping
/talley-lightweight/QG7z8zjVi2sV0Lk9nJmCFg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Height: from bottom of scope tube to receiver Low: Front 0.43, Rear 0.51 Medium: Front 0.53, Rear 0.61 High: Front 0.63, Rear 0.71 Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Searches for products like these typically include: Optics,Scope Bases & Mounts,Browning, Browning X-Bolt
More

Talley Lightweight 2-Piece...

$58.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Browning X-Bolt Matte Low
+ $4.99 shipping
/talley-lightweight/Vblzj_iGVU-tppaS5kfx7w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Height: from bottom of scope tube to receiver Low: Front 0.43, Rear 0.51 Medium: Front 0.53, Rear 0.61 High: Front 0.63, Rear 0.71 Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Searches for products like these typically include: Optics,Scope Bases & Mounts,Browning, Browning X-Bolt
More

DNZ Hunt Master 2-Piece Scope...

$50.95
MidwayUSA DNZ Hunt Master 2-Piece Scope Mounts with Integral 1 Rings Tikka, Knight MK85 Matte Low
+ $4.99 shipping
/dnz-hunt-master-2piece/37TB61_8WpMkQqRHNCoKjw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Signature Series DNZ Huntmasters 2-piece Scope Mount is precision machined from solid block 6061T6 aluminum for an extremely rugged mount that weigh approxamatley 1/3 of steel ring base combos. These easy to install ring mounts require no special tools and provide a rock solid mounting platform with hardened grade eight screws with up to 4x more threads than competing products. This system eliminated the need for selecting a ring and base separate that can loosen over time under the recoil of modern firearms. The Hunt Master series is a solid mount that will will hold true while looking great atop your rifle. Technical Information Material: 6061T6 Aluminum Ring Height:(measured from base of ring to bottom of scope tube) Low: .480 Medium: .605 High: .687 Notes Integral scope rings... Less
More

DNZ Hunt Master 2-Piece Scope...

$50.95
MidwayUSA DNZ Hunt Master 2-Piece Scope Mounts with Integral 1 Rings Thompson Center Venture Matte Low
+ $4.99 shipping
/dnz-hunt-master-2piece/8O-k59IILpX6FDglGAGwtw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Signature Series DNZ Huntmasters 2-piece Scope Mount is precision machined from solid block 6061T6 aluminum for an extremely rugged mount that weigh approxamatley 1/3 of steel ring base combos. These easy to install ring mounts require no special tools and provide a rock solid mounting platform with hardened grade eight screws with up to 4x more threads than competing products. This system eliminated the need for selecting a ring and base separate that can loosen over time under the recoil of modern firearms. The Hunt Master series is a solid mount that will will hold true while looking great atop your rifle. Technical Information Material: 6061T6 Aluminum Ring Height:(measured from base of ring to bottom of scope tube) Low: .480 Medium: .605 High: .687 Notes Integral scope rings... Less
More

Talley Lightweight 2-Piece...

$46.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Remington 700 Matte Low
+ $4.99 shipping
/talley-lightweight/1xVHlNJBq3HFXD1pxBH2Uw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Extra-Low: Front is .30, Rear is .410 Low: .400 Medium: .500 High: .600 Extra-High: .800 Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action... Less
More

Talley Lightweight 2-Piece...

$46.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Extended Front Remington 700 Matte Medium
+ $4.99 shipping
/talley-lightweight/6A9RDZphZv7eMvKJJMSOMw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Diameter: 1 Ring Height: .600 from bottom of scope tube to receiver Fits: Remington 700 Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action Rifle,Mounting Systems
More

Talley Lightweight 2-Piece...

$46.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Remington 700 Extra Low Matte
+ $4.99 shipping
/talley-lightweight/BNzUhdG1WBT0jN6WaaNAnA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Extra-Low: Front is .30, Rear is .410 Low: .400 Medium: .500 High: .600 Extra-High: .800 Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action... Less
More

Talley Lightweight 2-Piece...

$46.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Remington 700 Matte Medium
+ $4.99 shipping
/talley-lightweight/CpRvmDVi0sVNx7-7GLuYWw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Extra-Low: Front is .30, Rear is .410 Low: .400 Medium: .500 High: .600 Extra-High: .800 Searches for products like these typically include: Optics,Scope Bases & Mounts,Remington, Remington 700,Short Action... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2017 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443
http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443