Oe Replacement Switch And Harness, Kenworth(tm), Voltage Rating 12, Black Finish, For Use With Kenworth(tm) And Freightliner(tm) Specific Models, Q Standards, Includes Harness

BWD Switches are manufactured to meet or exceed OE performance. Late model vehicles combine controls into a single column mounted switch assembly so that the driver has ready access to windshield wipers and washer, turn signals, headlights, and cruise control. These are all designed within a single multi-function switch so that the driver can keep his hands on the steering wheel during adverse weather or driving conditions. Most Switches products are available for in-store pickup from Advance Auto Parts.

Longacre Pre-Wired panels are an easy and good looking alternative to building and assembling your own dashboard. The high quality 40 amp ignition and accessory switches and the pushbutton starter switch are all protected with rubber switch covers. Use the accessory switches for dash lights, electric fans, blowers, brake shut-off solenoids, etc. Each toggle switch has its own red pilot light which is wired to light up when that switch is on. These panels are for regular (non-magneto) ignitions. Measures 6.38 inches wide by 3.5 inches high. Graphics and colors on the panel may vary.

Battery Disconnect Switch, In-line Terminal, Brass Material, Length 5 In., Width 2 1/2 In., Depth 4 5/8 In., Stud Size 5/16 In., Max. Amps 250 Continuous, Bolt Connection, Connector Type In-line, For Use With 12 Volt

Adding Accessories and switches has never been easier or cleaner in your vehicle General Information: 2008+ Ford Powerstroke 6.4L Upfitter switches Features: Simillar to the 2005 Ford Super Duty came out with a few cool options and one of the best option FORD gave new customers are these Upfitter switches. The kit includes 4 relays wire harness and switches ready to power almost anything. This is a plug and play system that takes 20 minutes to install. These switches will also be easily added to any vehicle. You would simply cut the plug off the end that goes into the fuse panel and supply power to the six wires. The 4 switches would also fit into a simple bracket to be mounted almost anywhere.

BWD Switches are manufactured to meet or exceed OE performance. Late model vehicles combine controls into a single column mounted switch assembly so that the driver has ready access to windshield wipers and washer, turn signals, headlights, and cruise control. These are all designed within a single multi-function switch so that the driver can keep his hands on the steering wheel during adverse weather or driving conditions. Most Switches products are available for in-store pickup from Advance Auto Parts.

Sensor Switch CMRB-6-480V Line Voltage T5/T8 High Bay Sensor, 480 Volt

Switch for Star - Part# 2E-Y8493. Fits Star Models: 530F, 530FA, 530FD.

Vacless Adjustable Switch With Pressure Gauge is the replacement part for the Safety Vacuum Release System.

Classic Styling. Replace those cheap ugly plastic factory window switches with a set of brightly polished billet aluminum switches that will complete the unfinished look of your Mustangs boring stock plastic interior. Premium Quality. CNC machined from lightweight 6061 T6 billet aluminum and then polished to a bright finish, these switches are extremely durable and will last for years. Easy installation. Simply use a small screwdriver to gently pry the OEM switches out, and than "snap" the new billet aluminum switches in their place. Application. This Polished Billet Window Switch Kit is designed as direct fit replacement for the 1997 to 2004 Mustang Convertibles.

We carry the highest quality master battery switches available. This competition- proven switch is rated for 100 amps continuous duty. (See note below on how to spot a lower quality clone.) This switch has three sets of contacts for cars with alternators. The main contacts disconnect the battery while the auxiliary contacts disconnect the ignition coil and short the alternator output to ground through a 3 ohm resistor that is furnished with the switch. A removable actuating key with splash guard, weather-proof cap, resistor and installation instructions are included. (Resistor lead configuration may vary from the photograph shown.) Question: How do I know if I'm looking at the genuine article and not a lower quality clone? Answer: The terminals of the genuine... Less

Signal Switch Kit, Voltage Rating 12, Lamp Capacity 18, Black Finish, Fmvss Sae Code Q Standards

Release Date: 2008-07-31

2005+ Ford Powerstroke 6.0L 05+ Upfitter switches and wire set with High Idle Option The 2005 Ford Super Duty came out with a few cool options and one of the best option FORD gave new customers are these Upfitter switches. The kit includes 4 relays wire harness and switches ready to power almost anything. This is a plug and play system that takes 20 minutes to install. Instructions included. These switches will also be easily added to any vehicle. You would simply cut the plug off the end that goes into the fuse panel and supply power to the six wires. The 4 switches would also fit into a simple bracket to be mounted almost anywhere. Click here for more information.

Switch Kit for Middleby - Part# 46521. Fits Middleby Models: BE2136, BE3240, BG2136, PS200, PS200 Tandem, PS200-R68, PS220-R68, PS220FS, PS224, PS224-R68, PS314SBI, PS360EWB, PS520E, PS520G, PS536GS, PS540E, PS540G, PS570G, S1820.

TRINITY SWITCH BLADE 1/8 AXLE Bearing Set of 9 Metal Shielded Bearings * Fits Model: TRINITY SWITCH BLADE 1/8 AXLE Bearing * Quantity: Set of 9 Bearings * Type: Deep groove ball bearings * Closures: Metal shielded * Lubrication: Pre-Greased * Rating: High Speed Bearings

Pressure Switch Harness X800200

When swapping the TH-400 transmission into any vehicle, this kit helps make installation of the transmission's kickdown feature a snap. This switch mounts to either a TH-700 or TH-350 throttle cable bracket. Most Shifters and Transmissions products are available for in-store pickup from Advance Auto Parts.

Switch To Starter Cable, Battery, Copper Material, 1 Gauge, Length 68 In, Stud Size 3/8 In, Bolt Connection, Black

Remote Control Switch, Dynamic Braking With Ac Winches, For 4z327 And 5w474

Fits older style SL series Streamlights

Hitch Balls & Mounts by CURT. CURT Switch Trailer Ball Features - Easily change between 1 7/8", 2", & 2 5/16" Ball sizes. Choose from 1" or ¾" shank size. Constructed from premium grade steel with nickel- chrome plating. Complies with National Standard SAE-J684 and V-5 regulations for ball sets. Lifetime guarantee against manufacturing defects. Curt Adjustable Ball Mount, Curt Switch Trailer Ball. For the top selection of CURT Trailer Hitches shop online today. The Curt Adjustable Ball Mount, Curt Switch Trailer Ball will improve and personalize your vehicle. Hitch Balls & Mounts by CURT - selected by many auto enthusiasts in the top automotive discussion forums. CURT Switch Trailer Ball for your vehicle will deliver the results you are looking for! CURT Switch Trailer Ball - Trailer... Less

Switch, Set - Assembly for Lincoln - Part# 369167. Fits Lincoln Models: 1000, 1001, 1004, 1005, 1022, 1023, 1040, 1041, 1100, 1101, 1102, 1103, 1116, 1117, 1130, 1131, 1132, 1133, 1160, 1161, 1162, 1163, 1180-1, 1180-2, 1200, 1201, 1202, 1203, 1204, 1205, 1240, 1241.

RPM Activated Switches will perform a variety of different functions from turning on a bulb or solenoid to activating an MSD timing control at a desired rpm. The PN 8956, has 2 activation wires, 1 to ground a circuit and the other to open a circuit. Simply plug in an rpm module and wire the switch to the circuit you want to activate. When the engine rpm reaches that amount, the circuit is activated and will remain on until the rpm falls below that amount.Product Features:Great for turning on a bulb or solenoid at a desired rpmCan also be used to activate an MSD Timing Control at a certain rpmAdjusts by changing the rpm module once the switch has been wired to the circuit you want activated. Most Ignition products are available for in-store pickup from Advance Auto Parts.

New Replacement Window Switch. PartsGeek offers high quality new, OEM and aftermarket products. 1240014

Battery Disconnect Switch, Top Terminal, Brass/copper Material, Length 4 In., Width 3 In., Depth 2 1/4 In., Stud Size 5/8 And 5/16-18 In., Max. Amps 250 Continuous, Bolt Connection, Connector Type Negative, For Use With 12 Volt

Battery Disconnect Switch, Side Terminal, Brass/copper Material, Length 4 In., Width 3 In., Depth 1 1/2 In., Stud Size 3/8-18 In., Max. Amps 250 Continuous, Bolt Connection, Connector Type Negative, For Use With 12 Volt