Showing results for "sundstrand lathe"
Results 1 - 40 of 1500+

Sundstrand 21 Series Valve...

$35.00
eBay Sundstrand 21 Series Valve Plates
+ $6.00 shipping
/sundstrand-21-series/03E7wlYxl0DlMTu3Zl4HAQ==/info
eBay
IN_STOCK ( In stock )
SUNDSTRAND 21 SERIES VALVE PLATE 9210478 R .H. ROTATION PUMP 9210479 L.H. ROTATION PUMP 921080 FIXED MOTOR (NOS) NEW OLD STOCK GENUINE THIS LISTING IS FOR ONE VALVE PLATE ONLY
More

PTG Lathe Centering Bar 1 x 8

$99.99
MidwayUSA PTG Lathe Centering Bar 1 x 8
+ $7.59 shipping
/ptg-lathe-centering-bar-1/wfV7wlVee5MmUqELWLQUpw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This steel centering bar allows the alignment of a lathe to be checked. Technical InformationNotes: Allows checking alignment of lathe. Recesses on each end align headstock and tailstock centers. Aids in offsetting tailstock for taper cutting. Steel.
More

PTG Barrel Threading Lathe...

$35.99
MidwayUSA PTG Barrel Threading Lathe Bit Square 3/8
+ $4.99 shipping
/ptg-barrel-threading/-jxeTrUz_k3YwbqfwDf87g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The square bit cuts a true 10 threads per inch square thread for 03 Springfields and Enfields. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks.
More

PTG Barrel Threading Lathe...

$42.99
MidwayUSA PTG Barrel Threading Lathe Bit 55-Degree 1/2
+ $4.99 shipping
/ptg-barrel-threading/65KXlmjdDSFWNlXJ3t4s_A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The 55 Degree cutters are designed to cut the true threads of the 98 Mauser. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks.
More

PTG Barrel Threading Lathe...

$42.99
MidwayUSA PTG Barrel Threading Lathe Bit 60-Degree 1/2
+ $4.99 shipping
/ptg-barrel-threading/DUnMWiZv0-0xWBzE4Ysu5A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The 60 Degree cutters duplicate most after market Mauser thread patterns. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks.
More

Suntec, Sundstrand J2cb 100,...

$206.00
eBay Suntec, Sundstrand J2cb 100, J2bb 100, J3cb 100, J3bb 100 Oil Burner Pump
No Shipping Info
/suntec-sundstrand-j2cb/YrMSlHC4-Mt7fUjxPjcdCg==/info
eBay
IN_STOCK ( In stock )
Brand New and Fresh Suntec Oil Burner Pump DIRECTLY replaces J2CB 100, J2BB 100, J3CB 100 and J3BB 100 pumps. Including units with -1, -2, -3, or -4 after the model number.This also includes models H2CB 100, H2BB 100 , ,,,,,,,,,,,,,, as above but with H instead of J. IF YOU HAVE ANY QUESTIONS REGARDING SPECIFICS ABOUT YOUR MODEL NUMBER BE SURE TO ASK before buying! This unit is Clockwise rotation when the shaft is pointing at you and the model numbers up and nozzle connection is on the left as s
More

PTG Barrel Threading Lathe...

$42.99
MidwayUSA PTG Barrel Threading Lathe Bit 55-Degree 3/8
+ $4.99 shipping
/ptg-barrel-threading/S0he5XLQ6foNIWfRrskJ6w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The 55 Degree cutters are designed to cut the true threads of the 98 Mauser. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks.
More

PTG Barrel Threading Lathe...

$44.99
MidwayUSA PTG Barrel Threading Lathe Bit 60-Degree 5/16
+ $4.99 shipping
/ptg-barrel-threading/Tkvk0JCIBixp71RVbZ4Abg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The 60 Degree cutters duplicate most after market Mauser thread patterns. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks.
More

PTG Barrel Threading Lathe...

$42.99
MidwayUSA PTG Barrel Threading Lathe Bit 60-Degree 3/8
+ $4.99 shipping
/ptg-barrel-threading/Z8IK07hjWr2vRE76G5BzaA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The 60 Degree cutters duplicate most after market Mauser thread patterns. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks.
More

PTG Barrel Threading Lathe...

$28.99
MidwayUSA PTG Barrel Threading Lathe Bit Lever Actions 3/8
+ $4.99 shipping
/ptg-barrel-threading/h54k0n3QrCqtCPKqfbP19A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The lever action cutter cuts the 12 threads per inch for Marlin lever guns and Remington Rolling blocks. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks.
More

927a495-4 Diode - Sundstrand...

$42.50
eBay 927a495-4 Diode - Sundstrand - Semicon - - - Ez-1
+ $5.95 shipping
/927a4954-diode/KLn8A1iyD0JKB40bk5o_pQ==/info
eBay
IN_STOCK ( In stock )
927A495-4 DIODE - NEW OLD STOCK - NSN: - PRICE IS FOR ONE (1) EACH - 15 EACH AVAILABLE.
More

PTG Bolt Facing Lathe Bit 3/8

$36.99
MidwayUSA PTG Bolt Facing Lathe Bit 3/8
+ $4.99 shipping
/ptg-bolt-facing-lathe-bit/DolEFIvPjZt9Xq3KqoCFSQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Designed with the proper shape to open bolt faces to magnum dimensions. Technical InformationNotes: 2 1/8 long. Designed to open bolt faces to magnum dimensions.
More

Lathe Pulley Bushing - L3-109

$20.48
Sears Parts Direct Lathe Pulley Bushing - L3-109
+ $8.99 shipping
/lathe-pulley-bushing/1XweZG0t9uKngJHS5GW6mg==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Choose this manufacturer- approved bushing for your lathe.Use this bushing to replace a bushing that allows your lathe to spin.The bushing works with your lathe's variable speed pulley and main pulley spindle. Plan to replace your lathe's spindle when repl
More

Hydraulic Sauer Sundstrand...

$1,450.00
eBay Hydraulic Sauer Sundstrand Flow Control Servo Valve Kvfaa5102 Mcv116a3101
Free Shipping
/hydraulic-sauer/7A4-p7QH0SNP0BZQDDm2Ww==/info
eBay
IN_STOCK ( In stock )
Free Shipping
HYDRAULIC SAUER SUNDSTRAND FLOW CONTROL SERVO VALVE KVFAA5102 MCV116A3101 NEW SN0100185 H66
More

Hydraulic Sauer Sundstrand...

$1,450.00
eBay Hydraulic Sauer Sundstrand Flow Control Servo Valve Kvfba5102 Mcv11613101
Free Shipping
/hydraulic-sauer/Se_3RqCvRzsq79WTGZEuBg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
HYDRAULIC SAUER SUNDSTRAND FLOW CONTROL SERVO VALVE KVFBA5102 MCV11613101 NEW H17
More

Hydraulic Sauer Sundstrand...

$1,450.00
eBay Hydraulic Sauer Sundstrand Flow Control Servo Valve Kvfba Kvfba5201 Mcv116a3102
Free Shipping
/hydraulic-sauer/YU4UEowir-YEDCA4LLQBjQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
HYDRAULIC SAUER SUNDSTRAND FLOW CONTROL SERVO VALVE KVFBA KVFBA5201 MCV116A3102 # 59
More

Suntec Or Sundstrand...

$109.45
eBay Suntec Or Sundstrand A1ra-7738 Waste Oil Heater Burner Pump 1725 Rpm
Free Shipping
/suntec-or-sundstrand/pPZXKza9wDeY2aomtZCqTg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
BRAND NEW!SUNTEC A1RA-7738 Single Stage 100PSI - 1725 RPM This unit is Clockwise rotation when pump shaft is pointed towards you and the model numbers up and Nozzle connection is on right ..For additional information please go to: Please note some of the items require professional knowledge and skills to handle or installed.Thomas New Parts is not responsible for any damage or injuries resulted from mishandling of professional products. All HVACR equipment should be serviced/installe d by certif
More

Lathe Back Gear - 10-241X

$269.73
Sears Parts Direct Lathe Back Gear - 10-241X
Free Shipping
/lathe-back-gear-10241x/5ZNpuw2S57LNBjzA2rnF2Q==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Free Shipping
This manufacturer- approved back gear (part number 10-241X) is for lathes.Back gear 10-241X allows the lathe to turn at a slower speed.Wear work gloves to protect your hands when installing this part.
More

Replacement L38(18 O/l) Ball...

$21.90
eBay Replacement L38(18 O/l) Ball Guide Pins For Sundstrand Hydraulic Pump
+ $6.45 shipping
/replacement-l3818-ol/Y6Dpr49EhAJxUYtGG8Ra2g==/info
eBay
IN_STOCK ( In stock )
this a set(3) of ball guide pins for a L38(18 open loop)pump. ************* International Buyers – Please Note: ***************** *******Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. MANUFACTURERS NAMES AND DESCRIPTIONS ARE FOR REFERENCE PURPOSES ONLY. IT IS NOT IMPLIED THAT ANY PART IS T
More

12-24V Lathe Press Motor with...

$12.99
Banggood 12-24V Lathe Press Motor with Drill Chuck and Mounting Bracket-Motor
Free Shipping
/1224v-lathe-press-motor/9-x1SzRVenoNofbk2adXjA==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: 12-24V Lathe Press Motor with Drill Chuck and Mounting Bracket Specification: Power Supply DC 12 5A -24V 3A No load speed 8000 r/min ~28000 r/min 555 Ball Bearing Motor size approx 36.5mm*75mm Round Shaft 3.175mm(1/8) JT0 drill chuck approx 21mm*37mm With JT0 precision drill chuck clamping range 0.3 - 4mm Features: With JT0 precision drill chuck clamping range is 0.3 - 4mm. For milling machine, lathe, drilling machine, wood working machine. The shank with screw can be tight and flex for you. Package Included: 1 x Motor 1 x JT0 drill chuck 1 x Mount for the motor 1 x Drill bits 1 x chuck key 1 x connecting link 1 x screw More Details:
More

Lathe Carriage Slide Nut -...

$141.99
Sears Parts Direct Lathe Carriage Slide Nut - 10F-19
Free Shipping
/lathe-carriage-slide-nut/3kAU222VtAkjthU6cGd1UA==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Free Shipping
Pricing Subject to Change. Lathe Carriage Slide Nut
More

Lathe Buffing Extender 1-1/4X8

$25.99
Walmart.com Lathe Buffing Extender 1-1/4X8
Free Shipping
/lathe-buffing-extender/H4BwuQy040e4ahY6tfanRQ==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Turn your lathe into a buffing machine with this 8 long Extender Adapter. Makes buffing deep bowls, urns, and other vessels much easier and convenient. Drive end is threaded for a 1-1/4 x 8 TPI spindle. Buff end is threaded to accept a 3/8 buffing mandrel bolt, which is common to most standard buffing accessories, bowl buffs, wood buffs, and mandrels. Extender measures 1-3/4 in diameter by 8 long, and is made from solid aluminum. Comes with a no-lock spindle washer. USA
More

Bostitch 450S2-1 Jam-Free...

$394.99
Max Tool Bostitch 450S2-1 Jam-Free Lathing Stapler - 450S2-1
Free Shipping
/bostitch-450s21-jamfree/6htgu-Niv9QnHWZHrm_utA==/info
Max Tool
IN_STOCK ( In stock )
Free Shipping
Bostitch Jam-Free Lathing Stapler Bostitch 450S2-1 Jam-Free Lathing Stapler
More

Lathe Split Nut Assembly -...

$63.96
Sears Parts Direct Lathe Split Nut Assembly - 10F-12
+ $13.99 shipping
/lathe-split-nut-assembly/41Fn58acbyLGvXzahZqpAg==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
This manufacturer- approved split nut (part number 10F-12) for Craftsman metal lathe model 10127430 closes to grip the feed screw when a user engages the automatic feed.Checking the feed screw for wear before ordering a replacement split nut is recommended
More

Lathe Motor Pulley - 10-428

$170.99
Sears Parts Direct Lathe Motor Pulley - 10-428
Free Shipping
/lathe-motor-pulley/EwRZv8fHGeWiE0x2Y5NWmg==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Free Shipping
Pricing Subject to Change. Lathe Motor Pulley
More

Aircraft C130 P3 Hamilton...

$13.86
eBay Aircraft C130 P3 Hamilton Sundstrand 554861 Ported Setscrew 1/4-28 Unf .785l
+ $2.70 shipping
/aircraft-c130-p3-hamilton/Va25mM_cbV5P45I4pvhz2g==/info
eBay
IN_STOCK ( In stock )
15BC10211 This Item Up For Offer is a MILITARY AIRCRAFT ENGINE T56-A-7/15 C130B/E/H/N/P AIRCRAFT C130 C130F HC130 AC130H MC130H EC130E HC130 MC130W P3 PROPELLOR SYSTEM HAMILTON SUNDSTRAND P/N 554861 ANGLE DRILLED / PORTED SETSCREW 1/4-28 UNF 2A .240 LONG THREAD .785 OA LONG STEEL 8740 PLATED SLOT FLAT HEAD SPECIFICATIONS PICTURE # 7. Condition New and Unused, From Government Surplus Old Stock. NSN Number 5305-00-887-2090. Made in the USA by HAMILTON SUNDRAND CORP.. NOTE: TINKERERS, INVENTORS
More

Lot Of 4 Crown J.h.s Pump...

$11.99
eBay Lot Of 4 Crown J.h.s Pump Strainer.45676.su ntec, sundstrand W/ Gasket.oil Burner.
Free Shipping
/lot-of-4-crown-jhs-pump/zegFSTpM_itJdsbNlhCxKg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lot of four ( 4 ) New Crown #45676 Model J,K S Pump Strainers with gasket. (Sundstrand and Suntec) Kits Includes Strainer Cover Gasket for ALL J,H S series Oil Burner Pumps.NOT FOR WASTE OIL APPLICATIONS. These were part of an HVAC Buyout...Some boxes may show some wear label may vary.Free First Class shipping I handle NEXT BUSINESS DAY so you will get them FAST!Please see my feedback and buy with Confidence!
More

Lathe Traverse Gear Case -...

$188.99
Sears Parts Direct Lathe Traverse Gear Case - 10F-11
Free Shipping
/lathe-traverse-gear-case/UoPz9okTMrIrqPW_Ud0qow==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Free Shipping
This manufacturer- approved traverse gear case (part number 10F-11) is for lathes.Traverse gear case 10F-11 houses the traverse gear.Wear work gloves to protect your hands when installing this part.
More

8x125mm Internal Lathe...

$6.99
Banggood 8x125mm Internal Lathe Threading Boring Turning Tool with T8 Wrench-Turning Tool
Free Shipping
/8x125mm-internal-lathe/NyLBmNuBq2G9QS2svK1Nag==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: 8x125mm Internal Lathe Threading Boring Turning Tool with T8 Wrench Specification: Model SNR008k11 Material Chromium molybdenum Shank diameter 8mm Overall length 125mm Direction Right Hand Accept Insert 11 IR/11 NR Wrench specification T8 Package Included: 1 x Internal Lathe 1 x T8 wrench More Details:
More

Nicholson 10 Bastard Cut Long...

$15.99
MidwayUSA Nicholson 10 Bastard Cut Long Angle Lathe File
+ $4.99 shipping
/nicholson-10-bastard-cut/OewP2xBnhPs8eABCqXqisA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Designed to cut faster than regular mill files for lathe filing, these rectangular- shaped, single-cut, safe-edge files are just the ticket for filing the turning marks off of a barrel for that smoother-than-glas s finish. Technical InformationFeatur es: Rapid free cutting file designed for lathe filing Cut faster than regular mill files and leave a smoother finish Safe edges Notes: Approximately 0.2 thick, 0.935 wide tapering to 0.71 File length is measured exclusive of tang, from point to heel American pattern files are available in 3 grades of cut: bastard-cut, second-cut and smooth-cut Swiss pattern files are offered in seven cuts: No. 00, 0, 1, 2, 3, 4 and 6 with #00 being the coarse, #6 the fine cut
More

JET 719201 Wood Lathe Bed...

$198.99
CPO Outlets JET 719201 Wood Lathe Bed Extension
Free Shipping
/jet-719201-wood-lathe-bed/oswFZJvydiatZMHu9BGzWw==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
JWL-1221VS Wood Lathe Bed Extension - 719201. Lathe Sold Seperately. Extend the turning capacity of the JET 1221VS lathe to 43 in. for larger projects
More

Lathe Gear, 20-tooth - 10-1523

$93.85
Sears Parts Direct Lathe Gear, 20-tooth - 10-1523
Free Shipping
/lathe-gear-20tooth/zXbkqbemmru6Tm1k2kMp5w==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Free Shipping
This manufacturer- approved gear (part number 10-1523) is for lathes.Gear 10-1523 meshes with other gears inside the lathe to turn the lathe shaft and spindle.Wear work gloves to protect your hands when installing this part.
More

Lathe Bearing - 10F-16

$135.09
Sears Parts Direct Lathe Bearing - 10F-16
Free Shipping
/lathe-bearing-10f16/DcVa8xfu4iNycdJh5T3EYQ==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Free Shipping
Pricing Subject to Change. Lathe Bearing
More

JET 719203 Wood Lathe Bed...

$106.99
CPO Outlets JET 719203 Wood Lathe Bed Extension Stand
Free Shipping
/jet-719203-wood-lathe-bed/9_DS3f97-2iG-ycOdG7YHA==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
JWL-1221VS Wood Lathe Bed Extension Stand - 719203. Lathe Sold Seperately. Support the extension that gives the JET 1221VS lathe a full 43 in. of turning capacity
More

Westward Long Angle Lathe...

$16.51
Walmart.com Westward Long Angle Lathe File, 10Z694
+ $5.00 shipping
/westward-long-angle-lathe/3Odedoj5aph5fvvGE0B6EQ==/info
Walmart.com
IN_STOCK ( In stock )
Long Angle Lathe File, American Pattern, Profile Shape Rectangular, Cut Type Bastard, Length 12 In., Natural, 22/23 Teeth per Inch, General PurposeFeaturesIt em : Long Angle Lathe FilePattern : AmericanTeeth per Inch : 22/23Cut Type : BastardApplicatio n : General PurposeFinish : NaturalLength : 12Profile Shape : Rectangular
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335