Category

Tools and Accessories
Showing results for "sundstrand lathe"
Results 1 - 40 of 1500+

JET Machinists Belt Drive...

$2,299.99
Northern Tool JET Machinists Belt Drive Bench Lathe - 9 Inch x 20 Inch Size, Model 321376
Free Shipping
/jet-machinists-belt-drive/nHvLZexYGR82dafGExhrMA==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
60 longitudinal feeds from 0.0006 to 0.037in. Spindle is mounted in tapered roller bearings and has MT-#3 taper with 1 1/2in. x 8 TPI spindle nose. Cross slide travel of 5in. Tailstock adjusts for ...
More

Parker Hamilton Sundstrand...

$150.00
eBay Parker Hamilton Sundstrand Solenoid Valve
+ $15.00 shipping
/parker-hamilton/j2MvExOF13xr0f91mPu6Zw==/info
eBay
IN_STOCK ( In stock )
PARKER HAMILTON SUNDSTRAND 08F23C2140ACFEC05 . , NPT ALL ENDS , STYLE DESIGNATOR A1 STRAIGHT THRU , MEDIA FOR WHICH DESIGNED WATER-OIL-GAS SINGLE RESPONSE , MATERIAL COPPER ALLOY BODY RUBBER BUTADIENE- ACRYLONITRILE CLASS NBR FLOW CONTROL DEVICE , FREQUENCY IN HERTZ 60.0 , PHASE THREE , VOLTAGE IN VOLTS AND CURRENT TYPE 120.0 AC , NOMINAL THREAD SIZE 0.500 INCHES ALL ENDS , MAXIMUM OPERATING PRESSURE 300.0 POUNDS PER SQUARE INCH SINGLE RESPONSE , MOUNTING POSITION HORIZONTAL OR VERTICAL , CONNECT
More

Sundstrand Aviation Tubeaxial...

$495.00
eBay Sundstrand Aviation Tubeaxial Axivane Fan P/n X702-63a Model Avr 47 32d732
+ $15.95 shipping
/sundstrand-aviation/lAwJ0_bwz1NwFEyVHSycGg==/info
eBay
IN_STOCK ( In stock )
This sale is for one new military surplus, old stock, Sunstrand Aviation, Tubeaxial axivane fan. Model number AVR47-32D732.Comes with Sunstrand Corp.test certifcation. NSN 4140 00 269 7920 and P/N X702-63A. The fan housing is 5.562 inside diameter, 5.9375 long, single speed, inward flow, dustproof, with an operating speed of 7400 RPM. It has an air flow rate of 240 cubic feet per minute.Contract number is N00383 80 G 0104 TY1K. Date of manufacture is 12/83, and it is 115 volts and 400 cycles.
More

3 Hamilton Sundstrand...

$9.00
eBay 3 Hamilton Sundstrand Thermosetting Disk Insulator Part 29778
Free Shipping
/3-hamilton-sundstrand/KqEpXgdJQZprv6a-ewRgNA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
3 Hamilton Sundstrand Thermosetting Disk Insulator Part # 29778 This is a Brand New lot of 3 Hamilton Sundstrand Thermosetting Disk Insulator Part # 29778. Master Cross Reference Data (MCRD)- shows alternate part numbers for a national stock number NSN Description MCRL Information Part and Contact Information 5970014187781 INSULATOR,DISK INC: 18295 HMIC: P ESDC:ENAC:Cancelle d By: Part # MCRL Information CAGE Code Phone Fax Company Name Address 29778 ISC: 6 RNVC: 9 RNCC: 5 DAC: A 07148 860-654-6
More

Military Aircraft B-1b...

$40.00
eBay Military Aircraft B-1b Hamilton Sundstrand 556594 Tapered 4 3/4 X 1 3/4 X 1
+ $3.13 shipping
/military-aircraft-b1b/vd6VKzQqDiQD7w0aViovXQ==/info
eBay
IN_STOCK ( In stock )
14I401 up for sale is a helical tapered spring used on the B-1B aircraft , this was made by or covered under Hamilton sundstrand p/n 556594 , NSN 5360-01-206-3720, this spring is 4.76 long x 1.815 diameter on the big end and the small end is 1.047 dia,Nice new part for resale or for a project,Buyer to pay calculated shipping and packing to your locations, see our store for more items like this click below, we will work with you to save on shipping for multiple item purchases, Thank you RWK Chec
More

Sauer Sundstrand Hydraulic...

$400.00
eBay Sauer Sundstrand Hydraulic Gear Pump Tsp4-26/11
+ $26.00 shipping
/sauer-sundstrand/80919D5b12BbB-zo-eH_fQ==/info
eBay
IN_STOCK ( In stock )
writebid Store This SAUER SUNDSTRAND Hydraulic Gear Pump TSP4-26/11 is in new condition and guaranteed to functions 100%. It came from a local shop that was upgrading equipment and we can accept pay pal or your credit card. Please contact me with any questions. ½” INLET ½” OULLET 2 ¾” by 3 7/8” BOLT TO BOLT FLANGE .
More

Jet 708354 JML-S Adjustable...

$189.99
Tyler Tool Jet 708354 JML-S Adjustable Stand for Mini Lathe
+ $6.99 shipping
/jet-708354-jmls/HjhI3E9pSuKmdVeP3Ss-oQ==/info
Tyler Tool
IN_STOCK ( In stock )
JML-S Adjustable Stand for Mini Lathe - 708354
More

Heavy-Duty Wood Lathe

$995.00
Sears Marketplace Heavy-Duty Wood Lathe
No Shipping Info
/heavyduty-wood-lathe/bi37sQyoQ54xXVPUyr-lxA==/info
Sears Marketplace
IN_STOCK ( In stock )
A high-quality, heavy-duty cast iron bed wood lathe that we were almost ordered by our customers to bring in! This is one of the best package deals we offer. We ask you to compare all the features and accessories to others on the market. We are confident enough to say this is the best value out there. Call and ask for a reference from existing customers. An instant hit when introduced in early 1988, this lathe has proven to be an excellent performer! Features Motor: 3/4 HP, 110V/220V, single-phase Swing over bed: 14 Swing over gap: 17 Swing over tool rest: 10 Distance between centers: 40 Spindle size: 1 x 12 TPI RH Spindle taper: MT #2 Tailstock taper: MT #2 Indexed spindle Every 30 7 speeds: 500 3070 RPM Center-to-floor height: 41-1/2 Outboard spindle size: 7/8 x 16 TPI LH Approximate... Less
More

Replacement L38(18 O/l)...

$412.00
eBay Replacement L38(18 O/l) Cylinder Block For Sundstrand Hydraulic Pump, Motor
+ $10.20 shipping
/replacement-l3818-ol/Cz3RmT8l6IcKxmgyiS0Ctw==/info
eBay
IN_STOCK ( In stock )
This is a replacement cylinder block for a sauer sundstrand L38(18 open loop) series pump.
More

Machine Guards And Shields...

$104.17
Zoro Machine Guards And Shields Lathe Guard,for 12 To 16 In Dia Chuck
Free Shipping
/machine-guards-and/iX4HMnE9NwqWTe0qK_0osw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Medium Lathe Guard, For Use With 12 To 16 In Diameter Chuck, Length 16 In, Width 8 In, Height 8 In, Melting Temp. Range 482-590 F, Features Clear Semi Circular Wrap Around Polycarbonate Shield, 8 In W x 16 In L, Includes Mounting Bracket, Extension Tube And Hardware
More

Lathe Jaw (soft) al, 1.5mm,...

$347.00
Grainger Lathe Jaw (soft) al, 1.5mm, 6.5 60 Deg. Model: HR-115-2.5-A
+ $11.60 shipping
/lathe-jaw-soft-al/SwlKGx0ieHqPkMXlwGbaqg==/info
Grainger
IN_STOCK ( In stock )
Lathe Jaws, Soft, Aluminum, Serrated 1.5mm, 60 Degrees, Length 6.5, Width 2.5, Height 2.5, For Use With B-215 Kitagawa, Package Quantity 3
More

Ranger Products Combination...

$5,579.99
Northern Tool Ranger Products Combination Brake Lathe, Model RL-8500
Free Shipping
/ranger-products/fZYdEjVW4WKOoiCwxZDibw==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
With features designed to increase your productivity, this powerful lathe is a great addition to any workshop. Extra lift gate fee may apply. Application Brake lathe. 150 or 200 RPM spindle One...
More

Lathe Jaw (soft) al, off, pt...

$299.25
Grainger Lathe Jaw (soft) al, off, pt 6.25. Model: HR-112-2.5-OP-A
+ $11.09 shipping
/lathe-jaw-soft-al-off/iDC2dIEuwq7_v99yUU1DHQ==/info
Grainger
IN_STOCK ( In stock )
Lathe Jaws, Soft, Offset, Pointed, Aluminum, Serrated 1.5mm, 60 Degrees, Length 6.25, Width 2.0, Height 2.5, For Use With B-212 Kitagawa, Package Quantity 3
More

Lathe Jaw (soft) al, off, pt...

$437.75
Grainger Lathe Jaw (soft) al, off, pt 2.5. Model: HR-155-2.5-OP-A
+ $11.81 shipping
/lathe-jaw-soft-al-off/9-BFlWkHeOGp6hy4IbXwYg==/info
Grainger
IN_STOCK ( In stock )
Lathe Jaws, Soft, Offset, Pointed, Aluminum, Serrated 1.5mm, 60 Degrees, Length 7.5, Width 2.5, Height 2.5, For Use With B-15 Kitagawa B-18, Package Quantity 3
More

Sherline Model 4000 Lathe...

$570.00
eBay Sherline Model 4000 Lathe ...new...the Original Workhorse
+ $40.00 shipping
/sherline-model-4000-lathe/aajYGMm_uy6Bxe6Yi1cymA==/info
eBay
IN_STOCK ( In stock )
Made in the USA!ANTI-BACKLASH ADJUSTMENT INTRODUCED ON LATHE CROSSLIDE...An anti-backlash nut and lock have been added to the lathe crosslide on all 4400 models. This allows backlash on the crosslide leadscrew to be adjusted in the same manner as it has been done on Sherline mills on the X- and Y-axis for many years. The first lathes saddles with this new capability are now being applied to the deluxe longbed 4400-series lathes. A $25.00 per machine price increase has been added to cover the co
More

Chuck , Lathe , 3 Jaw Self...

$121.05
eBay Chuck , Lathe , 3 Jaw Self Centering Vsc-5a-fb , 5, Vertex ,
Free Shipping
/chuck-lathe-3-jaw/TgcwoIqxyEf6iOCCCMYnsw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
eBay Store Search Chuck , Lathe , 3 Jaw Self Centering VSC-5A-FB , 5 , Vertex , NEW Brand: Vertex Model: VSC-5A-FB Condition: NEW Country of origin: TAIWAN 3 jaw self centering jaws, 5 lathe chuck, plain back. Includes 2 set of solid jaws. Replacement chuck for any conventional or NC lathe. - Outside diameter, 5 - Jaws, 3 jaw, self centering. - Threaded holes diameter, 4.5 , (115 mm). - Mounting holes, 3, M8 - Chuck height, 55 mm, (with jaws, 78 mm). - Gripping range, O.D. 3 to 130 mm, I.D. 40
More

STEEL CITY 24-in x 50-in Mini...

$490.70
Lowe's STEEL CITY 24-in x 50-in Mini Wood Lathe 60170G
+ $79.00 shipping
/steel-city-24in-x-50in/YoEWvXf2fqpPnR70AQ_j0g==/info
Lowe's
IN_STOCK ( In stock )
Solid Granite Bed and Head Stock: A Steel City exclusive, the granite bed and head stock gives you the added weight you need for a lathe and will never twist, warp, or corrode. 5 turning speeds range from 500 to 3600 RPM provides a wide range of speeds for various turning operations. 12 swing over the bed allows you to create a variety of decorative projects up to 12 in diameter.
More

Lathe Jaws (soft) al, ser, 60...

$476.00
Grainger Lathe Jaws (soft) al, ser, 60 Deg 6.5. Model: HR-115-5.0-A
+ $14.00 shipping
/lathe-jaws-soft-al/C09MtPsYAcldIP_Yu9EYYg==/info
Grainger
IN_STOCK ( In stock )
Lathe Jaws, Soft, Aluminum, Serrated, 60 Degrees, Length 6.5, Width 2.5, Height 2.5, For Use With B-215 Kitagawa, Package Quantity 3
More

Lathe Jaw (soft) al, off, pt...

$240.00
Grainger Lathe Jaw (soft) al, off, pt 1.75. Model: HR-82-2.0-OP-A
+ $10.51 shipping
/lathe-jaw-soft-al-off/DLHPbDtX-U9zf1k2OigdUQ==/info
Grainger
IN_STOCK ( In stock )
Lathe Jaws, Soft, Offset, Pointed, Aluminum, Serrated 1.5mm, 60 Degrees, Length 4.0, Width 1.75, Height 2.0, For Use With B-10 Kitagawa, B-210 Kitagawa, 11 In Matsumoto Hollow, Package Quantity 3
More

Lathe Jaws (soft) al, t/g,...

$102.90
Grainger Lathe Jaws (soft) al, t/g, 5.75 1.75. Model: HR-490-P-A
+ $10.24 shipping
/lathe-jaws-soft-al/EBigEX9s168MRgKda_uZ-A==/info
Grainger
IN_STOCK ( In stock )
Lathe Jaws, Soft, Aluminum, Pointed, Tongue And Groove, American T And G, Length 5.75, Width 1.75, Height 3.875, For Use With Bergman, Bison, Buck, Cushman, Huron, Rohm, Forkhardt, Pratt Burnerd America, Sca, S.p., W And S, Nobel And Yuasa
More

Sherline 6010 Lathe And Mill...

$2,327.50
eBay Sherline 6010 Lathe And Mill ultimate Machine Shop ..metric...save $166.00
+ $150.00 shipping
/sherline-6010-lathe-and/6FjF8lqw3YoSEVoRw5W7pQ==/info
eBay
IN_STOCK ( In stock )
Made in the USA!ANTI-BACKLASH ADJUSTMENT INTRODUCED ON LATHE CROSSLIDE...An anti-backlash nut and lock have been added to the lathe crosslide on all 4400 models. This allows backlash on the crosslide leadscrew to be adjusted in the same manner as it has been done on Sherline mills on the X- and Y-axis for many years. The first lathes saddles with this new capability are now being applied to the deluxe longbed 4400-series lathes. A $25.00 per machine price increase has been added to cover the co
More

6 Direct Mount Lathe Chuck 3...

$677.61
eBay 6 Direct Mount Lathe Chuck 3 Jaw 2 Pc Taper A1-5 Semi-steel Scroll Manual new
+ $22.66 shipping
/6-direct-mount-lathe/Xk_fCv4R_aV0MqCmiEacmQ==/info
eBay
IN_STOCK ( In stock )
6 BISON DIRECT MOUNT SCROLL LATHE CHUCK with 2 PIECE HARD REVERSIBLE 3 JAWS TAPER A TYPE A1-5 6 Direct Mount Semi-Steel Scroll 3-Jaw 2-Piece Hard Reversible Jaws Type A1 spindle has a 2 bolt hole pattern, inside and outside the taper Part # 7-801-0615 C
More

Sherline 4000b Lathe...

$831.25
eBay Sherline 4000b Lathe Package...new Feature... Anti Backlash Adjustment
+ $40.00 shipping
/sherline-4000b-lathe/qd5_-_MKvW5fWVDVxOoqfw==/info
eBay
IN_STOCK ( In stock )
4000B LATHE PACKAGE ANTI-BACKLASH ADJUSTMENT INTRODUCED ON LATHE CROSSLIDE...An anti-backlash nut and lock have been added to the lathe crosslide on all 4400 models. This allows backlash on the crosslide leadscrew to be adjusted in the same manner as it has been done on Sherline mills on the X- and Y-axis for many years. The first lathes saddles with this new capability are now being applied to the deluxe longbed 4400-series lathes. A $25.00 per machine price increase has been added to cover th
More

Lathe Jaw (soft) al, off, pt...

$240.00
Grainger Lathe Jaw (soft) al, off, pt 1.5 [PK/3]. Model: HR-149-2.0-OP-A
+ $10.24 shipping
/lathe-jaw-soft-al-off/Mi3E3SydMpfc0OR5hyPccA==/info
Grainger
IN_STOCK ( In stock )
Lathe Jaws, Soft, Offset, Pointed, Aluminum, Serrated 1.5mm, 60 Degrees, Length 3.5, Width 1.5, Height 2.0, For Use With 8 Inkitagawa(208), B-208 Kitagawa, 8 In Matsumoto, 8 In Howa, Package Quantity 3
More

Combo Lathe w/ Milling...

$1,650.00
Sears Marketplace Combo Lathe w/ Milling Attachment
No Shipping Info
/combo-lathe-w-milling/VK1-qY1VX7SOFWPMFcgZFA==/info
Sears Marketplace
IN_STOCK ( In stock )
Precision, versatility and high quality in a small package are what you get with our new G0516 Lathe Mill Combo. The 6 speed lathe includes big machine features like a 4-way turret tool post, cuts both metric and inch threads, see-through eye shield, 3/4 HP motor and a 9-3/4 swing. The milling head features its own 4/5 HP variable speed motor, tilting column, MT#3 spindle taper and 8 of vertical travel. It bolts onto the back of the bed and is sturdy and versatile. This is an exceptional value and will make a great addition to any shop. Made in an ISO 9001 factory. Specifications: Swing: 9-3/4 (lathe), 12-3/4 (mill/drill) Swing over saddle: 6 Distance between centers: 21 Lathe spindle bore: 3/4 Lathe spindle taper: MT #3 Mill/drill spindle taper: MT #3 Tailstock taper: MT #2 Tailstock... Less
More

Lathe Jaws (soft) al, t/g,...

$129.35
Grainger Lathe Jaws (soft) al, t/g, 7.25 2.0. Model: HR-495-P-A
+ $10.51 shipping
/lathe-jaws-soft-al/NDIoLSXP1mJ38-1GrHb2zg==/info
Grainger
IN_STOCK ( In stock )
Lathe Jaws, Soft, Aluminum, Pointed, Tongue And Groove, American T And G, Length 7.25, Width 2.0, Height 3.937, For Use With Bergman, Bison, Buck, Cushman, Huron, Rohm, Forkhardt, Pratt Burnerd America, Sca, S.p., W And S, Nobel And Yuasa
More

Lathe Jaw (soft) al, 1.5mm,...

$127.85
Grainger Lathe Jaw (soft) al, 1.5mm, 1.5 60 Deg. Model: HR-149-2.0-A
+ $10.24 shipping
/lathe-jaw-soft-al/TGincfsFgZqFxPRlDq5urw==/info
Grainger
IN_STOCK ( In stock )
Lathe Jaws, Soft, Aluminum, Serrated 1.5mm, 60 Degrees, Length 3.5, Width 1.5, Height 2.0, For Use With 8 Inkitagawa(208), B-208 Kitagawa, 8 In Matsumoto, 8 In Howa, Package Quantity 3
More

Lathe Jaws (soft) ser, 60...

$293.50
Grainger Lathe Jaws (soft) ser, 60 Deg, 6.5 [PK/3]. Model: HR-155-5.0
+ $23.33 shipping
/lathe-jaws-soft-ser-60/UhCb-TII-l8rP6dfEKcn3w==/info
Grainger
IN_STOCK ( In stock )
Lathe Jaws, Soft, Serrated, 60 Degrees, Length 6.5, Width 2.5, Height 2.5, For Use With B-15 Kitagawa B-18, Package Quantity 3
More

Lathe Jaw (soft) al, 1.5mm,...

$135.85
Grainger Lathe Jaw (soft) al, 1.5mm, 1.75 60 Deg. Model: HR-82-2.0-A
+ $10.42 shipping
/lathe-jaw-soft-al/b00s_A2FH-O5srZuPwvsrQ==/info
Grainger
IN_STOCK ( In stock )
Lathe Jaws, Soft, Aluminum, Serrated 1.5mm, 60 Degrees, Length 4.0, Width 1.75, Height 2.0, For Use With B-10 Kitagawa, B-210 Kitagawa, 11 In Matsumoto Hollow, Package Quantity 3
More

6lathe Chuck Set-tru3 Jaw 2...

$692.35
eBay 6lathe Chuck Set-tru3 Jaw 2 Piece Hard Reversible Forged-steel Fine Adjustnew
+ $18.44 shipping
/6lathe-chuck-settru3-jaw/IEoSYk8E2JTCmYSrwo0RTg==/info
eBay
IN_STOCK ( In stock )
6 BISON SET-TRU LATHE CHUCK REVERSIBLE 3-JAW (2-PIECE) FORGED-STEEL with FINE ADJUSTMENT 6 Forged-Steel Set-Tru with Plain Back Fine Adjustment Chuck 3-Jaw 2-Piece Hard Reversible Jaws Each chuck is provided with: 1 Set of hard master jaws 1 Set of
More

5 Bison 3 Jaw Lathe Chuck...

$545.00
eBay 5 Bison 3 Jaw Lathe Chuck Direct Mount Thread 1-1/2-8
+ $20.00 shipping
/5-bison-3-jaw-lathe-chuck/HZU6yvSizWXGVqp8cd2XRg==/info
eBay
IN_STOCK ( In stock )
5 Bison 3 Jaw Self Centering Semi Steel Scroll Lathe Chuck Direct Mount Threaded 1-1/2 - 8 Spindle Thru-Hole Diameter 1.26 * Precision Three Jaw Scroll Lathe Chucks * With two-piece reversiable three jaws.* American Standard Tongue Groove Jaw Dimentions * R.P.M. Max 3,500 * Chuck Weight 12 Lbs.* Scroll, pinion, hard and master jaws, hardened and ground all the way around. Standard Accessories:1 Set full of two-piece reversible hard jaws and master jaws.1 Set of mounting bolts 1 Chuck Wrench B
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2014 eBay Inc. All Rights Reserved

Advertisement
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.sp6-21623
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.sp6-21623