Category

Building Supplies
Showing results for "stepper motor driver 80v"
Results 1 - 40 of 1043

StepStick DRV8825 Stepper...

$3.28
GearBest StepStick DRV8825 Stepper Motor Driver
Free Shipping
/stepstick-drv8825-stepper/xelZnjpWCcWgGrgULIolQA==/info
GearBest
IN_STOCK ( In stock )
Store not rated
Free Shipping
More

A4988 DRV8825 Stepper Motor...

$4.70
GearBest A4988 DRV8825 Stepper Motor Driver Board
Free Shipping
/a4988-drv8825-stepper/ZHWbz6A5YXHYK3XN3LvZtQ==/info
GearBest
IN_STOCK ( In stock )
Store not rated
Free Shipping
More

ST XNUCLEO IHM01A1 L6474...

$18.06
GearBest ST XNUCLEO IHM01A1 L6474 Stepper Motor Driver Extension Board with Power OK Fault LEDs
Free Shipping
/st-xnucleo-ihm01a1/yU3CAFl17k-x7x7gJ-QvYA==/info
GearBest
IN_STOCK ( In stock )
Store not rated
Free Shipping
More

A3967 EasyDriver V44 Shield...

$2.45
Banggood A3967 EasyDriver V44 Shield Stepper Motor Driver Board For Arduino
Free Shipping
/a3967-easydriver-v44/6e9wFSfhM7gvRDisQ87Qqw==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
3967 EasyDriver V44 Shield Stepper Motor Driver Board For Arduino Features: A3967 microstepping driver Compatible with 4, 6, and 8 wire stepper motors of any voltage Adjustable current control from 150mA/phase to 750mA/phase Power supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth) A simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). Note: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC. Package Include: 1 x EasyDriver Shield
More

L9110S H Bridge Stepper Motor...

$2.12
Banggood L9110S H Bridge Stepper Motor Dual DC Driver Controller Module For Arduino
Free Shipping
/l9110s-h-bridge-stepper/uUzdoI8gMINUhfe0jYeXiQ==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
L9110S H Bridge Stepper Motor Dual DC Driver Controller Module For Arduino Description: There are two L9110S motor control chip onboard This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor Feature: Work under low static current Power supply voltage: DC 2.5V - 12V Each channel has 800mA continuous current output Low saturation pressure drop TTL / CMOS output level compatible, can be connected directly to the CPU Output built-in clamping diode, apply to the perceptual load Control and drive integrate in IC Pin high pressure protection function Working temperature: 0C - 80C Size: 29 x 21mm(L x W) Circuit diagram: Package included: 1 x L9110S stepper motor driver
More

Usa Ship Free Longs 3 Axis...

$381.00
eBay Usa Ship Free Longs 3 Axis Nema 34 Stepper Motor 1232oz-in 5.6a +driver 80v Cnc
Free Shipping
/usa-ship-free-longs-3/qyqwBgI3l4IwABbJOO-G_w==/info
eBay
IN_STOCK ( In stock )
Free Shipping
This item includes:1. 3 pcs Stepper motor 34HS1456, 5.6A, 1232 oz.in, 4 leads, bipolar 2.3 pcs Stepper motor driver, 7.8A , 256 Micsteps, replacing M860 3.3 pc Power Supply 350W-60V 4. 1 pc Breakout Board More quatities, More discounts!! Detailed information :1. Nema 34 stepper motor:Stepper Motor 1 , Technical Specifications Part No.: 34HS1456 Frame Size: NEMA34 Step Angle: 1.8 degree Voltage: 3.6V Current: 5.6A/phase Resistance: 0.6 Ohm/phase Inductance: 6.5 mH/phase Holding torque: 8.7N.m 1232oz
More

5Pcs Gear Stepper Motor DC 5V...

$8.25
Banggood 5Pcs Gear Stepper Motor DC 5V 4 Phase 5-Wire Reduction Step For Arduino
Free Shipping
/5pcs-gear-stepper-motor/9fPzrSMx32e3VWD9Up0_lA==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
5Pcs Gear Stepper Motor DC 5V 4 Phase 5-Wire Reduction Step For Arduino Description : Model: 28BYJ-48 Diameter: 28mm Voltage: 5V DC Phase:4 Wire Length :23.5CM Step angle: 5.625 x 1/64 Reduction ratio: 1/64 5 lines cable 4 phase stepper motor can be driven by ULN2003 chip, can also be connected in phase 2 development board used for supporting the use of a direct plug and easy to use stepper motor used in the development board Weight: 34g Package included :  5 x Stepper Motor DC 5V
More

Wonderful Driver 4pcs Nema34...

$227.00
eBay Wonderful Driver 4pcs Nema34 Stepper Motor Driver Dq860ma 24-80v7.8a From Usa
Free Shipping
/wonderful-driver-4pcs/Ux8Ke6cCR7w8X7_QavgSDQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
div style=text-align:c enterimg src=http://ti2.auc tiva. com/sw/java.gif border=0br table align=centertr td height=28px valign=middle align=centerfont face=arial size=2b a href=http: //emporium. auctiva. com/lindalikesunf lower target=_blanklind alikesunflower store /a /b /font /td td a style=text- decoration:none href=http: //emporium. auctiva. com/lindalikesunf lower target=_blankimg src=http://ti2.auc tiva. com/sw/thumbgalle ry.gif border=0/a /td /tr /table /div img src=http
More

2Pcs L9110S H Bridge Stepper...

$3.28
Banggood 2Pcs L9110S H Bridge Stepper Motor Dual DC Driver Controller Module For Arduino
Free Shipping
/2pcs-l9110s-h-bridge/6wSYogc2vGclGadug0EIlQ==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
2Pcs L9110S H Bridge Stepper Motor Dual DC Driver Controller Module For Arduino Description: There are two L9110S motor control chip onboard This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor Feature: Work under low static current Power supply voltage: DC 2.5V - 12V Each channel has 800mA continuous current output Low saturation pressure drop TTL / CMOS output level compatible, can be connected directly to the CPU Output built-in clamping diode, apply to the perceptual load Control and drive integrate in IC Pin high pressure protection function Working temperature: 0C - 80C Size: 29 x 21mm(L x W) Circuit diagram:   Packag e included: 2 x L9110S stepper motor driver
More

5Pcs L9110S H Bridge Stepper...

$6.65
Banggood 5Pcs L9110S H Bridge Stepper Motor Dual DC Driver Controller Module For Arduino
Free Shipping
/5pcs-l9110s-h-bridge/t6gp_mSjigXoC1NrQ6bW-w==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
5Pcs L9110S H Bridge Stepper Motor Dual DC Driver Controller Module For Arduino Description: There are two L9110S motor control chip onboard This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor Feature: Work under low static current Power supply voltage: DC 2.5V - 12V Each channel has 800mA continuous current output Low saturation pressure drop TTL / CMOS output level compatible, can be connected directly to the CPU Output built-in clamping diode, apply to the perceptual load Control and drive integrate in IC Pin high pressure protection function Working temperature: 0C - 80C Size: 29 x 21mm(L x W) Circuit diagram:   Packag e included: 5 x L9110S stepper motor driver
More

Whole Sale3pcs Nema34 Stepper...

$169.00
eBay Whole Sale3pcs Nema34 Stepper Motor Driver Dq860ma 24-80v7.8a 256micro Hot Sell
Free Shipping
/whole-sale3pcs-nema34/HezNHCf6L2Ij1w8f7voI_w==/info
eBay
IN_STOCK ( In stock )
Free Shipping
lt;div style=text-align:c entergt;lt;img src=http://ti2.auc tiva. com/sw/java.gif border=0gt;lt;br gt;lt;table align=centergt; lt;tr gt;lt;td gt;lt;a style=text- decoration:none href=http: //emporium. auctiva. com/lindalikesunf lower target=_blankgt; lt;img src=http://ti2.auc tiva. com/sw/noflash. gif border=0gt;lt;/a gt;lt;/td gt;lt;td height=27px valign=middle align=centergt; lt;font face=arial size=2gt;lt;b gt;lt;a href=http: //emporium. auctiva. com/lindalikesunf lower target=_
More

Usa Free Shipcnc Longs 1 Axis...

$140.00
eBay Usa Free Shipcnc Longs 1 Axis Nema 34 Stepper Motor 965oz.in 5.6a +driver 80v
Free Shipping
/usa-free-shipcnc-longs-1/sMqQ9E-mL6TgHi10cjvf2A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Welcome to my Store!Ship from US to US buyer.This item includes:1PC Nema34 Stepper Motor 34HS9456 with 965 oz-in holding torque, 5.6A,98mm 1PC Stepper Driver DM860A with 7.8A replacing MD882,1PC Power Suuply 350W 60V 1PC Breakout Board 1PC DB25 Cable for free Detailed information 1. Nema 34 stepper motor:Model Step angel ( ° ) Motor Length L(mm) Rate Voltage (V) Rate Current (A) Phase Resistance ( Ω ) Phase Inductance (mH) Holding Torque (oz.in) Lead Wire (NO.) Rotor Inertia (kg. c m2 ) Motor
More

【usa Ship& Eu Free】4pcs...

$320.00
eBay 【usa Ship& Eu Free】4pcs Stepper Motor Driver Dq860ma,7.8a,80v & 4 Powers 3d Cnc
Free Shipping
/%C3%A3usa-ship-eu/4UBKe3xcpxXRfifvr4TSvg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Great News from Wantaimotor! Ship from USA or Germany warehouse , after payment, within 3-5 days for receiving products! Also Customers From France, Italy, Sweden,England, UK, Austria, Netherlands, Denmark,Belgium, Luxembourg, Estonia , Latvia , Lithuania , Poland , Romania , Slovakia , Slovenia , the Czech Republic , Hungary, Switzerland, Greece, Norway All EU Countries can be shipped as well :) No taxes from customs, no damage, better service, only for 5 sets, please don't hesitate! This item inclu
More

JK1545 Two Phase Hybrid...

$38.75
Banggood JK1545 Two Phase Hybrid Stepper Motor Driver For Money Counting 1.5A-4.5A DC 24-50V
Free Shipping
/jk1545-two-phase-hybrid/HYQMEWYIbrxTdAGS7ulhDA==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
escription: JK1545 Two Phase Hybrid Stepper Motor Driver For Money Counting 1.5A-4.5A DC 24-50V Specification: Type JK1545 Input  Voltage DC 24-50V Output Current  1.5A-4.5A Mircostepping 1/2 1/4 1/8 1/16 1/32 1/64 1/128 1/256 1/5 1/10 1/25 1/50 1/125 1/250 Protection forms Overheating over-voltage and over-current protection Size  118mm x 76mm x 33mm Weight 280g Working environment Temperature -15℃-40℃ Humidity Less
More

Usa Ship Freecnc Longs 3 Axis...

$381.00
eBay Usa Ship Freecnc Longs 3 Axis Nema 34 Stepper Motor 1232oz-in 5.6a +driver 80v
Free Shipping
/usa-ship-freecnc-longs-3/l2r_8iz-_n6pXx7b90Q5NA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
This item includes:1. 3 pcs Stepper motor 34HS1456, 5.6A, 1232 oz.in, 4 leads, bipolar 2.3 pcs Stepper motor driver, 7.8A , 256 Micsteps, replacing M860 3.3 pc Power Supply 350W-60V 4. 1 pc Breakout Board More quatities, More discounts!! Detailed information :1. Nema 34 stepper motor:Stepper Motor 1 , Technical Specifications Part No.: 34HS1456 Frame Size: NEMA34 Step Angle: 1.8 degree Voltage: 3.6V Current: 5.6A/phase Resistance: 0.6 Ohm/phase Inductance: 6.5 mH/phase Holding torque: 8.7N.m 1232oz
More

MARATHON MOTORS 80T17FH5414...

$298.13
Zoro MARATHON MOTORS 80T17FH5414 Metric Motor, 1 HP, 1725rpm, Rigid, 230/460V
Free Shipping
/marathon-motors/ECqyviWbpMmIJfC9MtO7MQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Metric Motor, 3Phase, Totally Enclosed FanCooled Motor Enclosure Design, 1 HP, 0.75 kW, Nameplate RPM 1725, Frame 80, Voltage 230/460, 60/50 Hz, 3 Phase, Full Load Amps 3.2/1.6, Rigid Base Motor Mounting Type, Motor Thermal Protection None, Insulation Class F, Service Factor 1.15, Ball Bearings, Frame Material Aluminum, Max. Ambient Temp. 40 Degrees C, CW/CCW Motor Shaft Rotation, Nominal Efficiency 80, Continuous Duty, 17011800, UL (E49747), CSA (LR2025), CE
More

Nema Series CNC 3D Printer...

$37.39
Walmart.com Nema Series CNC 3D Printer Stepper Motor Driver MB450A 4.2A Controller
Free Shipping
/nema-series-cnc-3d/ngrjdEEekbW4PxYJ9i2iNA==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Supply voltage up to +50VDC, Output current up to 4.2A. Inaudible 20 KHz chopping frequency. TTL compatible and optically isolated input signals.15 selectable microstep resolutions (SW4: Off=Half Current; On= Full Current), Protection against power leads(+, -)reversal.Half current function refers to no step pulse after 500 ms, the output current of drives is automatically reduced to 70% of the rated output current, to prevent electrical heating.The first three switch (SW1, SW2, SW3) of the DIP switch are used to set the current. Select a setting closest to your motor's required current. Microstep resolution is set by SW5, SW6, SW7, SW8.(0FF=0.ON=1)Wi dely used in labeling machines, engraving machines, pick-place devices, and etc.The MB450A  is a very small size high performance... Less
More

42MM NEMA17 Stepper Motor...

$3.20
Banggood 42MM NEMA17 Stepper Motor Alloy Steel Mounting Bracket With Screws 5x5x5cm For 3D Printer
Free Shipping
/42mm-nema17-stepper-motor/ICM5cBNOdHfVmH6z55AC3A==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
2MM NEMA17 Stepper Motor Alloy Steel Mounting Bracket With Screws 5x5x5cm For 3D Printer Description:   Ma terial: alloy steel Size:50 x 52 x 52mm(L x W x H) Color: black   Feature:   Durable with alloy steel material Fit for 42mm stepper motor such as NEMA17 Easy to install   Package Included:   1 x For 42mm NEMA17 Stepper Motor Alloy Steel Mounting Bracket with Screws
More

Us&eu Free Ship-3axis Wantai...

$168.00
eBay Us&eu Free Ship-3axis Wantai Stepper Motor Driver Dq860ma,80v,7.8a, 256micro
Free Shipping
/useu-free-ship3axis/rZiWrCSmnN1BdciMiSWUcw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
amp;lt;div style=text-align:c enteramp;gt;amp;lt ;img src=http://ti2.auc tiva. com/sw/java.gif border=0amp;gt;amp ;lt;br amp;gt;amp;lt;tabl e align=centeramp; gt;amp;lt;tr amp;gt;amp;lt;td amp;gt;amp;lt;a style=text- decoration:none href=http: //store.auctiva. com/wantaimotor99 amp;gt;amp;lt;img src=http://ti2.auc tiva. com/sw/browse1. gif border=0amp;gt;amp ;lt;/a amp;gt;amp;lt;/td amp;gt;amp;lt;td height=23px valign=middle align=centeramp; gt;amp;lt;font face=arial size=2amp;gt;amp;
More

CNC Router 3 Axis TB6560...

$33.50
Banggood CNC Router 3 Axis TB6560 Stepper Motor Driver Board Controller
Free Shipping
/cnc-router-3-axis-tb6560/abDTRfZawFG_ULAP_qRWxw==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
NC Router 3 Axis TB6560 Stepper Motor Driver Board Controller Features: 1-1/16 micro step setting and higher precision make it run more smoothly. 1.5-3A driving current and electrodeless is adjustable With relay output control, it can drive more external devices such as main shaft, water pump, oil pump and so on. Professional design, anti- interference and low heating power enable it drive stably. Motor at low speed crawl phenomenon, low noise and no resonance region. With closed high-speed photoelectric isolation, large capacity design, and two-stage signal processing, this product can protect user's computer and equipment comprehensively. 4 channel input control can be set limit, emergency stop, points, tool presetting and so on. Compatible with 2 phase-4 phase (4 line, 6 line, 8 line... Less
More

MARATHON MOTORS 80T11FH5509...

$299.75
Zoro MARATHON MOTORS 80T11FH5509 Metric Mtr, 1/2 HP, Rigid, 1130rpm, 230/460V
Free Shipping
/marathon-motors/CRBxjZgHlwCKv1b5nZAOwg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Metric Motor, 3Phase, Totally Enclosed FanCooled Motor Enclosure Design, 1/2 HP, 0.37 kW, Nameplate RPM 1130, Frame 80, Voltage 230/460, 60/50 Hz, 3 Phase, Full Load Amps 1.9/0.95, Rigid Base Motor Mounting Type, Motor Thermal Protection None, Insulation Class F, Service Factor 1.15, Ball Bearings, Frame Material Aluminum, Max. Ambient Temp. 40 Degrees C, CW/CCW Motor Shaft Rotation, Nominal Efficiency 72 Percent, Continuous Duty, 11011200, UL (E49747), CSA (LR2025)
More

USB CNC 3 Axis Stepper Motor...

$29.99
Banggood USB CNC 3 Axis Stepper Motor Driver Board Controller For DIY Laser Engraver
Free Shipping
/usb-cnc-3-axis-stepper/EEdSNh3xy4bW2zBzK_I0Qw==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
SB CNC 3 Axis Stepper Motor Driver Board Controller For DIY Laser Engraver Description: Input Voltage:7.5V-12V Support Stepper Motor Quanttity:3pcs Interface:USB Feature: Three axis stepper motor driver board Support G-code and Grbl controller Fit for DIY desktop laser engraver Package included: 1X USB CNC 3 Axis Stepper Motor Driver Board 1X USB Cable 4X Dupont Line
More

Nema 17 4 Wire CNC Robot...

$62.70
Walmart.com Nema 17 4 Wire CNC Robot Stepper Motor 48mm 1.3A 74oz.in w M415B Driver
Free Shipping
/nema-17-4-wire-cnc-robot/H8NAuntjliy_oaak4uinAw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
It is 2 phase. 1.8 Celsius Step Angle. High Step Accuracy and Resolution. Low Vibration and Noise.Can be Customized for Winding Current, Shaft Options, Cables and Connectors. Typical Applications for Nema Stepper Motor: Inject printers, Analytical and Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, High Speed Dome Camera and Robotics, RepRap, Markerbot, CNC Router AND OTHER projects..The driver supply voltage up to +40VDC, Output current up to 1.5A. Inaudible 20 KHz chopping frequency. TTL compatible and optically isolated input signals.7 selectable microstep resolutions: 1, 2, 4, 8, 16, 32, 64. Protection against power leads(+, -)reversal.The first three switch (SW1, SW2, SW3) of the DIP switch are used to set the current. Select a setting closest to your... Less
More

JKM Two Phase Stepper Motor...

$19.99
Banggood JKM Two Phase Stepper Motor 1.2A 1.8 Degree
Free Shipping
/jkm-two-phase-stepper/T-RMO6QI3-ZvDZYJVTQcEg==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
escription: JK42HS60- 1204  Two Phase Stepper Motor 1.2A 1.8 Degree Stepper Motor Brand: JKM Model: JK42HS60-1204 Rated Power:7.2W Rated Voltage: 6V Rated Current: 1.2A Rated speed: 1500RPM Rated Torque: 0.6NM Type: 2 Phase Stepper Motor Size: 42MM * 42MM * 60MM Certification: CE,ROHS Scope: 3D Printers, Monitor Equipment, Medical Machinery, Textile Machinery, Packaging Machinery, Stage Lighting,ect. Electrical Specifications: Model Step Angle ( ) Motor Length (mm) Rate Voltage (V) Rate Current (A) Phase Resistance (Ω) Phase Inductance (mH) Holding Torque (kg.cm) Lead Wire (NO.) Rotor Inertia (g.cm) Motor Weight (KG) JK42HS60-1204 1.8 60 6 1.2 3.3 3.0 5.2 4 54 0.5 General Specifications: Step Accurency Temperature RIse Ambient Temperature Range Insulation Resistance Dielectric Strength... Less
More

MARATHON MOTORS 80T34FH5513...

$285.30
Zoro MARATHON MOTORS 80T34FH5513 Metric Mtr, 1 HP, Rigid, 3390 rpm, 230/460V
Free Shipping
/marathon-motors/WKclofPVILf6Wdf4O_zgdQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Metric Motor, 3Phase, Totally Enclosed FanCooled Motor Enclosure Design, 1 HP, 0.75 kW, Nameplate RPM 3390, Frame 80, Voltage 230/460, 60/50 Hz, 3 Phase, Full Load Amps 2.8/1.4, Rigid Base Motor Mounting Type, Motor Thermal Protection None, Insulation Class F, Service Factor 1.15, Ball Bearings, Frame Material Aluminum, Max. Ambient Temp. 40 Degrees C, CW/CCW Motor Shaft Rotation, Nominal Efficiency 75.5 Percent, Continuous Duty, 30013600, UL (E49747), CSA (LR2025)
More

2 Axis Stepper Motor Driver...

$21.99
Banggood 2 Axis Stepper Motor Driver Board Controller Laser board For DIY Laser Engraver
Free Shipping
/2-axis-stepper-motor/fPYvW8YDMCbfMQBUEFemyA==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
escription: 2 Axis Stepper Motor Driver Board Controller Laser board  For DIY Laser Engraver Specification: Interface:USB Size:94*46mm Power Requirement: higher than12V 2A  Support Stepper Motor: Motor within 2A 2-phase 4-wire Input Voltage:7.5V-12V ( the voltage will affect the laser effect)) Power Interface: DC5.5 - 2.1  (Inside is positive  electro des and ouside is negative electrodes) Feature: Fit for DIY desktop laser engraver, dispensing machines printer,plotter MINI USB interfaces, 12V power supply, delivery lines. Send software.  2- axis  linkageY- axis dual interface, can drive a stepper motor within 2A 2-phase 4-wire Large MOS tube,onboard DC buck module, jumper  ADJ can adjust manually the laser voltage to control the laser power Note: Jumper inserted in ADJ, Regulate  the... Less
More

MARATHON MOTORS 80T11FH5512...

$443.25
Zoro MARATHON MOTORS 80T11FH5512 Metric Mtr, 3/4 HP, Rigid, 1130rpm, 230/460V
Free Shipping
/marathon-motors/sFmyp18wWMEO2IUon7ROjQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Metric Motor, 3Phase, Totally Enclosed FanCooled Motor Enclosure Design, 3/4 HP, 0.56 kW, Nameplate RPM 1130, Frame 80, Voltage 230/460, 60/50 Hz, 3 Phase, Full Load Amps 2.7/1.3, Rigid Base Motor Mounting Type, Motor Thermal Protection None, Insulation Class F, Service Factor 1.15, Ball Bearings, Frame Material Aluminum, Max. Ambient Temp. 40 Degrees C, CW/CCW Motor Shaft Rotation, Nominal Efficiency 72 Percent, Continuous Duty, 11011200, UL (E49747), CSA (LR2025)
More

1) Stepper Motor Driver

$28.50
eBay 1) Stepper Motor Driver
+ $3.50 shipping
/1-stepper-motor-driver/wF1U7opwWuC6QiH053rMEg==/info
eBay
IN_STOCK ( In stock )
Coleman Air 1) STEPPER MOTOR DRIVER PRODUCT DESCRIPTION 2A Micro-Stepping Stepper Motor Driver A4988 (Pololu Compatible) The A4988 micro-stepping stepper motor driver is a Pololu format compatible driver, ideal for Shield and breadboard compatibility. The A4988 at 2 amps capable and 35 volts of drive capacity makes this a perfect match for 3D printer all-in-one boards, such as RAMPS with plug and play compatibility. The micro stepper driver supports full, half, 1/4, 1/8 and 1/16 step modes fo
More

AUTONICS PMC-2HS-USB Stepper...

$854.10
Walmart.com AUTONICS PMC-2HS-USB Stepper Motor Controller, 2 Axis, 24VDC
Free Shipping
/autonics-pmc2hsusb/7nM27lXxkf78j6ieqBhs-w==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Stepper Motor Controller, 2 Axis Application, 64 Steps Per Axis, 24 VDC, For Use With Stepper Motor Drivers 5PFF4, 5PFF5, 5PFF6, 5PFF7, Max Output Pulse Frequency 4 Mpps, Height 3-3/4 In, Width 1-3/8 In, Depth 2-1/2 In, 2-Hole Mounting, Mounting Pattern 3.74 In on Center, Requires Stepper Motor Driver 5PFF4, 5PFF5, 5PFF6 or 5PFF7 and Ribbon Cable 5PFG0 or 5PFG1FeaturesHeig ht : 3-3/4Requires : Stepper Motor Driver 5PFF4, 5PFF5, 5PFF6 or 5PFF7 and Ribbon Cable 5PFG0 or 5PFG1Steps Per Axis : 64Voltage : 24 VDCStandards : CE, RoHSDepth : 2-1/2Max. Output Pulse Frequency : 4 MppsMounting Pattern : 3.74 In on CenterItem : Stepper Motor ControllerApplica tion : 2 AxisMounting : 2-HoleWidth : 1-3/8
More

15mm 2 Phase 4 Wire Stepper...

$1.99
Banggood 15mm 2 Phase 4 Wire Stepper Motor with Long Ballscrew 50.5mm Rod
Free Shipping
/15mm-2-phase-4-wire/fzhpT6-rmvR9puwODNAaBw==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
escription: 15mm 2 Phase 4 Wire Stepper Motor with Long Ballscrew 50.5mm Rod Features: Excellent selection, skilful manufacture, solid and durable, ideal for Arduino Robot.   Specific ation: Motor type two-phase four-wire Motor diameter 15 mm Motor height: 11 mm Rod diameter  3 mm Rod length 50.5 mm Total Length  64 mm Net weight 15.8 g Quantity 1 pcs   Package Included: 1x Stepper Motor  More Details:
More

JKM NEMA11 1.8 28 Hybrid...

$11.99
Banggood JKM NEMA11 1.8 28 Hybrid Stepper Motor Two Phase 4 Wires 32mm For CNC Router
Free Shipping
/jkm-nema11-18-28-hybrid/6RcZ0WtBnpoTlzqS-q4EwA==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: JKM NEMA11 1.828 Hybrid Stepper Motor Two Phase 32mm For CNC Router   Specific ation: Brand: JKM Model: JK28HS32- 0674  Motor length: 32mm Diameter of axle: 5mm The front shaft length: 20mm Size: 28mm x 28mm x 32mm Outgoing line: 300mm (Plug is not included) Certification:  C E Scope: 3D Printers, Monitor Equipment, Medical Machinery, Textile Machinery, Packaging Machinery, Stage Lighting, ect. Genaral Specification: Item Specifications Step Angle 1.8 Temperature Rise 80℃max Ambient Temperature -20℃~+50℃ Insulation Resistance 100 MΩMin., 500VDC Dielectric Strength 500VAC for 1 minute Shaft Radial Play 0.02Max. (450g-load) Shaft Axial Play 0.08Max. (450g-load) Max. radial force 28N (20mm from the flange) Max. axial force 10N Electrical Specification: Model No. Step Angle Motor... Less
More

5) Stepper Motor Driver

$44.63
eBay 5) Stepper Motor Driver
+ $3.50 shipping
/5-stepper-motor-driver/UwMlNG_5MYbehyY_SSQlew==/info
eBay
IN_STOCK ( In stock )
Coleman Air 5) STEPPER MOTOR DRIVER PRODUCT DESCRIPTION Dual H-Bridge driver using L298N chip. 5V logic. Operates on 5-35Vdc. 25W max power. 43 x 43 x 26mm. This item consists of 5) STEPPER MOTOR DRIVER Please note.Any tools and/or accessories shown in the photo(s)are not included, only the exact items specified above. These items are new, unused. We buy in bulk and repackage for resale.Important :Some of these items may not be in stock at our Texas location and will need to be shipped to here
More

AUTONICS PMC-1HS-USB Stepper...

$681.75
Walmart.com AUTONICS PMC-1HS-USB Stepper Motor Controller, 1 Axis, 24VDC
Free Shipping
/autonics-pmc1hsusb/7uR7PlL-BIO3daGxEmUZAw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Stepper Motor Controller, 1 Axis Application, 64 Steps Per Axis, 24 VDC, For Use With Stepper Motor Drivers 5PFF4, 5PFF5, 5PFF6, 5PFF7, Max Output Pulse Frequency 4 Mpps, Height 3-3/4 In, Width 1-3/8 In, Depth 2-1/2 In, 2-Hole Mounting, Mounting Pattern 3.74 In on Center, Requires Stepper Motor Driver 5PFF4, 5PFF5, 5PFF6 or 5PFF7 and Ribbon Cable 5PFG0 or 5PFG1FeaturesHeig ht : 3-3/4Requires : Stepper Motor Driver 5PFF4, 5PFF5, 5PFF6 or 5PFF7 and Ribbon Cable 5PFG0 or 5PFG1Steps Per Axis : 64Voltage : 24 VDCStandards : CE, RoHSDepth : 2-1/2Max. Output Pulse Frequency : 4 MppsMounting Pattern : 3.74 In on CenterItem : Stepper Motor ControllerApplica tion : 1 AxisMounting : 2-HoleWidth : 1-3/8
More

1) Stepper Motor Driver, 2a...

$29.93
eBay 1) Stepper Motor Driver, 2a Per Phase
+ $3.50 shipping
/1-stepper-motor-driver/geHKepioWLAjkR9xwA4L4w==/info
eBay
IN_STOCK ( In stock )
Coleman Air 1) STEPPER MOTOR DRIVER, 2A PER PHASE PRODUCT DESCRIPTION Based on the Allegro A4988 stepper driver chip, this board drives bi-polar stepper motors up to a max 2A/phase. It is a chopper microstepping driver which defaults to 16 step microstepping mode. It can take a maximum motor drive voltage of around 30V, and includes on-board 5V/3.3V regulation, so only one supply is necessary. Although this board should be able to run most systems without active cooling while operating at 1.4-1
More

3.9mm 2 Phase 4 Wire Stepper...

$1.29
Banggood 3.9mm 2 Phase 4 Wire Stepper Motor Micro Stepper Motor
Free Shipping
/39mm-2-phase-4-wire/bSTqzwCQ-cHxl2FA1ceijA==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
escription: 3.9mm 2 Phase 4 Wire Stepper Motor Micro Stepper Motor  Specificat ion: Stepper motor diameter 3.9 mm Height 8.5 mm (containing the bearing sleeve) Output shaft 1.7 mm  (small division lever) Output shaft length 6 mm Feature: High precision. Widely used in all kinds of digital products. Package Included: 1 x  Stepper Motor More Details:
More

DC 4-9V Drive Stepper Motor...

$12.99
Banggood DC 4-9V Drive Stepper Motor Screw With Nut Slider 2 Phase 4 Wire
Free Shipping
/dc-49v-drive-stepper/N0zHS7A5oMMBb3l_Wqijww==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
C 4-9V Drive Stepper Motor Screw With Nut Slider 2 Phase 4 Wire Description: Motor Type 2 phase 4 wire Driving Voltage DC 4-9V/500mA Screw Length 90mm screw Diameter 3mm Slider Width 15mm Effective Stroke 80mm Screw Pitch 0.5mm Step Angle 18 Stage Size 105X15mm/4.31 X 0.59(L*W) Feature: Micro Sliding table fit for DIY  laser engraving machine as its XY axis Package included: 1X Drive Stepper Motor Screw With Nut Slider Small Stage
More

6mm 2-phase 4-wire Micro-step...

$0.99
Banggood 6mm 2-phase 4-wire Micro-step Motor DC2V-5V Mini Slider Screw Stepper Motor
Free Shipping
/6mm-2phase-4wire/gbuhaJQb_H4eBddFplzFZw==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: 6mm 2-phase 4-wire Micro-step Motor DC2V-5V Mini Slider Screw Stepper Motor   Specifica tion: Phase Resistance: 40Ω Voltage: DC 2V-5V Total Length: 15.3 mm Motor Height: 5.3 mm Motor Diameter: 6mm Secretary rod length: 10MM Service life: 10000 hours   Package Included: 1x Micro Motor   More Details:
More

NEMA 24 2 Phase Robot Lathe...

$105.87
Walmart.com NEMA 24 2 Phase Robot Lathe CNC Stepper Motor 76mm 4A 311oz.in w Driver
Free Shipping
/nema-24-2-phase-robot/YQky30XsV0R3BjH2g696gw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
It is 2 phase. 1.8 Degree Step Angle. High Step Accuracy and Resolution. Low Vibration and Noise.Can be Customized for Winding Current, Shaft Options, Cables and Connectors. Typical Applications for Nema Stepper Motor: Inject printers, Analytical and Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, High Speed Dome Camera and Robotics, RepRap, Markerbot, CNC Router AND OTHER projects.The driver supply voltage up to DC 50V, Output current up to 4.2A.15 selectable microstep resolutions (SW4: Off=Half Current; On= Full Current), Protection against power leads(+, -)reversal.Half current function refers to no step pulse after 500 ms, the output current of drives is automatically reduced to 70% of the rated output current, to prevent electrical heating.The first... Less
More

Nema 24 1.8 Degree CNC...

$121.40
Walmart.com Nema 24 1.8 Degree CNC Stepping Stepper Motor 90mm 4A 368oz.in w MB450A Driver
Free Shipping
/nema-24-18-degree-cnc/xDsBklfv96gMf02d-7TcDw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
It is 2 phase. 1.8° Step Angle. High Step Accuracy and Resolution. Low Vibration and Noise.Can be Customized for Winding Current, Shaft Options, Cables and Connectors. Typical Applications for Nema Stepper Motor: Inject printers, Analytical and Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, High Speed Dome Camera and Robotics, RepRap, Markerbot, CNC Router AND OTHER projects.The driver supply voltage up to +50VDC, Output current up to 4.2A.15 selectable microstep resolutions (SW4: Off=Half Current; On= Full Current), Protection against power leads(+, -)reversal.Half current function refers to no step pulse after 500 ms, the output current of drives is automatically reduced to 70% of the rated output current, to prevent electrical heating.The first three... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.eap-30212
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.eap-30212