Springfield Trapdoor Rifle Sight Sports and Outdoors - Shopping.com

Category

Sport and Outdoor
Showing results for "springfield trapdoor rifle sight"
Results 1 - 40 of 1500+

Springfield Armory Sight,...

$45.99
Brownells Springfield Armory Sight, Rear, Hooded Aperture, National Match
+ $7.95 shipping
/springfield-armory-sight/vt5vunt0sk1Rq8mwajAHFw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
SIGHT, REAR, HOODED APERTURE, NATIONAL MATCH Mfg: Springfield Armory
More

Sightmark Laser Bore Sight...

$29.99
MidwayUSA Sightmark Laser Bore Sight 25-06 Remington, 270 Winchester, 30-06 Springfield
+ $4.99 shipping
/sightmark-laser-bore/PGwCeZxCV1MFL9cwLeYCDQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is one of the simplest bore sighters you will ever use. Simply chamber the bore sight like a normal cartridge and a laser will shoot out of the barrel showing exactly where your rifle or shotgun is aiming. This will save time and ammunition as only a few shots will have to be fired for fine tuning. Technical InformationNotes: Caliber or gauge specific bore sightRed laser has a wavelength of 632 to 650, uses less tha 5 milliwattsThree AG4 or two AG5 batteries provided (depending on the caliber) approximately 1 hour of battery lifeSighting range 15 to 100 yardsWill display a 2 dot at 100 yardsBrass outer caseOperating temperature 14 degrees F to 122 degrees FIncludes a carrying pouch
More

Springfield Armory Sight...

$11.99
Brownells Springfield Armory Sight Cover, Rear, Plastic
+ $7.95 shipping
/springfield-armory-sight/YMK8DEMAJknMRPgbVNkW5w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
SIGHT COVER, REAR, PLASTIC Mfg: Springfield Armory
More

Maryland Gun Works Front &...

$129.99
MidwayUSA Maryland Gun Works Front & Rear Sight Tool Springfield XD
+ $8.39 shipping
/maryland-gun-works-front/3wA2HNk7JMQgigXT_HkANQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Night sights with tritium lamps are too fragile for installation methods like hammers and punches. Maryland Gun Works designed their sight tools specifically for but not limited to night sights. Beware of imitators, some designs are made to attempt to work on many different models but these individual tools are much better suited for their specific task. Technical Information: Tool is not designed to remove extremely tight factory rear sights. Sight tool is intended to install and adjust Tritium Night Sights
More

Lapua Reloading Brass 30-06...

$107.99
MidwayUSA Lapua Reloading Brass 30-06 Springfield Box of 100
+ $9.19 shipping
/lapua-reloading-brass/HwLGz9PhTFR_WXnRL_eVxg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lapua World-class brass begins with high-quality raw materials and superior smelting and metallurgical competence. Throughout the production process, the focus on quality control is consistent with Lapua's exacting standards. Particular attention is paid to hardness, solidity and grain structure. All Lapua brass is tested to 30% overpressure according to Commission Internationale Permanente, the agency that oversees ammunition and component producers in Western Europe. Technical Information Caliber: 30-06 Springfield Finish: Brass New, unprimed brass should always be resized before loading. This brass has undergone factory annealing which extends brass life, as a result of the annealing process the neck portion of the brass may be discolored until the case is cleaned. This is not loaded... Less
More

Springfield Armory Sight Set...

$1.99
Brownells Springfield Armory Sight Set Screw, Front
+ $7.95 shipping
/springfield-armory-sight/GJvygHzV4dV_h9MyDp60_Q==/info
Brownells
IN_STOCK ( In stock )
Store not rated
SIGHT SET SCREW, FRONT Mfg: Springfield Armory
More

RCBS Small Base Sizer Die...

$26.29
MidwayUSA RCBS Small Base Sizer Die 30-06 Springfield
+ $4.99 shipping
/rcbs-small-base-sizer-die/VGSt2mAiIbR5h3HoQLfofQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS Small Base Sizing Dies are useful for reloaders loading for semi-automatic, pump action and lever action rifles to help ensure that proper functioning. Small base sizing dies size brass to minimum specifications and help to ensure that cartridges will chamber every time. Technical Information Material: Steel Die Types Included: Small Base Sizer Die (with Expander- Decapping Unit) Accessories: Plastic storage case Notes: Small base sizer dies are usually required for reloading ammunition to be used in automatic, semi-automatic, pump, slide and some lever-action rifles. These dies size the case somewhat smaller in diamter and also set the shoulder back slightly more than a Full-Length sizer die to ensure poper functioning in the actions of these rifles. NOT RECOMMENDED FOR AMMUNITION... Less
More

RCBS Small Base 2-Die Set...

$33.99
MidwayUSA RCBS Small Base 2-Die Set 30-06 Springfield
+ $7.59 shipping
/rcbs-small-base-2die-set/i6wai2fIaGnTK0DeLFn3iA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS Small Base 2-Die sets are useful for reloaders loading for semi-automatic, pump action and lever action rifles to help ensure that proper functioning. Small base sizing dies size brass to minimum specifications and help to ensure that cartridges will chamber every time. Due to the fact that this product sizes more than regular dies, it is crucial to have a sufficient amount of high quality lubricant to prevent stuck cases. Technical Information Material: Steel Die Types Included: Small Base Sizer Die (with Expander- Decapping Unit) Regular Seating Die (with Seater Plug) Accessories: Plastic storage case Notes: Applies a roll crimp. Small base sizer dies are usually required for reloading ammunition to be used in automatic, semi-automatic, pump, slide and some lever-action rifles... Less
More

Fobus Springfield XDM Compact...

$24.99
Academy Sports and Outdoors Fobus Springfield XDM Compact Holster (00676315003748)
Free Shipping
/fobus-springfield-xdm/Axo913iSlwixUqAUhTJTuQ==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Fobus Springfield XDM Compact Holster features a retention adjustment screw and a low-profile design.
More

Redding National Match 3-Die...

$184.99
MidwayUSA Redding National Match 3-Die Set 30-06 Springfield
+ $8.39 shipping
/redding-national-match/at3O-NV4gwqe0WkBYHYMSg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding National Match Die Set combines three of Redding's most popular dies for shooters looking to get the most accurate rounds out of their gas operated rifles. This set features a full-length sizing die, competition seating die, and taper crimp die to ensure flawless operation in semi-automatic rifles. This die set meets all SAAMI specifications and is sure to produce extreme accuracy and consistency.
More

Lee Quick Trim Die 30-06...

$9.99
MidwayUSA Lee Quick Trim Die 30-06 Springfield
+ $4.99 shipping
/lee-quick-trim-die-3006/DW2uTX7pj-Ru6FssUJ26NQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been producing some of the highest quality reloading equipment for over 50 years. The Lee Deluxe Quick Trim Case Trimmer is the next step in the evolution of quick and accurate case trimming. Each die is made to hold brass cases securely while the cutter (sold separately) is turned ensuring that case mouths are cut square. Each die is threaded 7/8-14 to work in all reloader presses that accept standard reloading dies. Quick Trim Die Bodies are made for the most popular calibers on the market. Note: Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472 Technical Information: Dies Included: Quick Trim Die Die Size: Standard 7/8-14 threaded die Shellholder Required: Yes Shellholder Included: No Accessories... Less
More

Lee Classic Loader 30-06...

$28.99
MidwayUSA Lee Classic Loader 30-06 Springfield
+ $7.59 shipping
/lee-classic-loader-3006/K7aHeseFccjA4AWxZAcXZA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Classic Reloader is the perfect kit for someone who would like to start reloading one caliber without breaking the bank. Contains everything you need to begin loading (except a hammer). Kit includes Sizing Die, Decapping Chamber, Bullet Seater and Priming Chamber, Priming Rod, Powder Measure, load data, plastic case and complete instructions. Technical InformationMateri al: Steel Loader Parts Plastic Powder Dipper Kit Includes: Bullet Seater and Priming Chamber Decapping Chamber Sizing Die Decapper Priming Rod Powder Measure Load Data Complete Instructions Notes: Complete Reloading System (requires hammer which is not included) Also Includes Plastic Storage Case
More

Rcbs .30-06 Springfield...

$33.99
Academy Sports and Outdoors Rcbs .30-06 Springfield Full-Length Die Set (00076683148018)
Free Shipping
/rcbs-3006-springfield/6T7ElzQtEEj20No0lwUrvg==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
Free Shipping
The RCBS .30-06 Springfield Full-Length Die Set allows fired .30-06 Springfield cases to be easily chambered.
More

Redding Small Base Body Die...

$36.49
MidwayUSA Redding Small Base Body Die 30-06 Springfield
+ $4.99 shipping
/redding-small-base-body/Oci0Wl_NPwf1LyOH18JVBA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Small Base Body Dies were designed to full length resize the case body and bump the shoulder without disturbing the case neck. The Small Base Body Dies are for use with firearms with custom chamberings that are tighter than SAAMI Specifications. For precise control of the amount of shoulder bump, Redding Competition Shellholders are recommended. Due to the fact that this product sizes more than regular dies, it is crucial to have a sufficient amount of high quality lubricant to prevent stuck cases. Not for use with loaded ammunition. Shellholder sold separately. Technical InformationMateri al: Steel Die Type Included: Small Base Body Die Notes: Small Base Full Length Sizer dies squeeze the brass down to minimal SAAMI specifications. This ensures reliable feeding in semi-automatic... Less
More

Redding 2-Die Set 6.5-06...

$92.99
MidwayUSA Redding 2-Die Set 6.5-06 Springfield
+ $7.59 shipping
/redding-2die-set-6506/TYzCrz2S7mS-enq4sDChSw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Redding 2-Die Set 30-06...

$47.49
MidwayUSA Redding 2-Die Set 30-06 Springfield
+ $7.59 shipping
/redding-2die-set-3006/t352ZU8Ape_ZVcBy5SkZfw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Redding Deluxe 3-Die Set...

$79.99
MidwayUSA Redding Deluxe 3-Die Set 30-06 Springfield
+ $8.39 shipping
/redding-deluxe-3die-set/2Iba9y9Vw_D8do-EH-Yx1g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding 3-Die Sets are available for rifle and pistol cartridges. The pistol sets contain a full length sizing die, expander die, and bullet seating die. The rifle sets contain a full length sizing die, neck sizing die, and a bullet seating die. The full length sizing die features a decapping rod assembly with neck expander. The expander die includes a neck expanding plug and the seating die features a built-in crimping ring and seating plug. This combination is sure to produce consistent, reliable ammunition time and time again. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping unit) Expander Die for Pistol Sets and Neck Sizing Die for Rifle Sets Profile or Taper Crimp Seater Die (with built in... Less
More

Springfield Armory Adjustable...

$43.99
MidwayUSA Springfield Armory Adjustable Rear Sight 1911 Novak Cut Steel Blue
+ $4.99 shipping
/springfield-armory/qdVRs4rpkQjRJxjRZfnd-w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Fully adjustable target grade rear sight, with a Novak low mount cut that is the same sight that is used on the Springfield Armory custom guns. Matte. Technical InformationMateri al: SteelNotch Width: .125Features: Fully Adjustable for Windage and ElevationNotes: Replaces Factory Non-adjustable Rear SightAllen Wrench and Flat Screwdriver Included for Adjustments
More

Winchester Reloading Brass...

$219.99
MidwayUSA Winchester Reloading Brass 30-06 Springfield Box of 500 (Bulk Packaged)
+ $13.49 shipping
/winchester-reloading/TRPx5EKN8k87__jmECXDCw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Winchester Reloading Brass is manufactured to extremely tight tolerances to ensure smooth feeding and positive chambering. Consistent case-to-case weight and capacity delivers outstanding accuracy. Winchester's high quality, durable brass can be reloaded several times. New, unprimed brass. This is not loaded ammunition. Technical Information Caliber: 30-06 Springfield Finish: Brass Preparation: Due to the manufacturing process and/or shipping, case mouths may not be perfectly round. To ensure a round case mouth, cases must be sized (or have the expander ball of the sizing die run through case neck) and deburred/Chamfere d prior to loading. Note: A light staining may be found on the case neck of new brass. This is due to annealing. Annealing is a process, performed by the manufacturer,... Less
More

Springfield Armory Xd(M)...

$49.99
Academy Sports and Outdoors Springfield Armory Xd(M) Compact 9mm Magazine (0706397888558)
Free Shipping
/springfield-armory-xdm/fURkgZnHZcfjw6cNxukIQQ==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Springfield Armory XD(M) Compact 9mm Magazine features stainless-steel construction and a 19-round capacity.
More

Hornady Reloading Brass 30-06...

$37.99
MidwayUSA Hornady Reloading Brass 30-06 Springfield Box of 50
+ $7.59 shipping
/hornady-reloading-brass/1-Zd-x-WyJg_xH5l5vC1XQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Hornady produces brass with the same precision, attention to detail and focus on perfection that has made them a world leader in bullets. They measures their brass for consistent wall concentricity, tests pressure calibration to ensure uniform case expansion and hand-inspects each piece. This dedication to quality ensures proper seating of the bullet both in the case and in the chamber and consistent charges and pressures. The result is optimal velocity and repeatable accuracy from your cartridges. New, unprimed brass. This is not loaded ammunition. Technical Information Caliber: 30-06 Springfield Finish: Brass
More

Winchester Reloading Brass...

$24.99
MidwayUSA Winchester Reloading Brass 30-06 Springfield Box of 50 (Bulk Packaged)
+ $7.59 shipping
/winchester-reloading/VE_UaznABhBJJHmON4aSuQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Winchester Reloading Brass is manufactured to extremely tight tolerances to ensure smooth feeding and positive chambering. Consistent case-to-case weight and capacity delivers outstanding accuracy. Winchester's high quality, durable brass can be reloaded several times. New, unprimed brass. This is not loaded ammunition. Technical Information Caliber: 30-06 Springfield Finish: Brass Preparation: Due to the manufacturing process and/or shipping, case mouths may not be perfectly round. To ensure a round case mouth, cases must be sized (or have the expander ball of the sizing die run through case neck) and deburred/Chamfere d prior to loading. Note: A light staining may be found on the case neck of new brass. This is due to annealing. Annealing is a process, performed by the manufacturer,... Less
More

Nosler Custom Reloading Brass...

$53.99
MidwayUSA Nosler Custom Reloading Brass 30-06 Springfield Box of 50
+ $7.59 shipping
/nosler-custom-reloading/b2lmx3q5q_A93ylidD3nNQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment, Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt, each piece of brass offers consistency in trimmed length and neck wall thickness. This brass is new and unprimed. This is not loaded ammunition. Technical Information Caliber: 30-06 Springfield Finish: Brass
More

Pedersoli 1861 Springfield...

$999.99
Cabela's Pedersoli 1861 Springfield .58-Caliber Musket
+ $19.95 shipping
/pedersoli-1861/YF1Z7sMSLJPsYESRZiQOVQ==/info
Cabela's
IN_STOCK ( In stock )
An upgraded version of Springfields Model 1855 without the Maynard tape priming system, the .58-caliber Springfield 1861 rifled musket set the standards for performance, reliability and accuracy that similar firearms had to meet. Demand for the gun was so high that it overwhelmed Springfield Armorys production capabilities and the company had to contract work out to at least 20 other manufacturers. More than 700,000 were made between 1861 and 1865, and production continued until 1872 with the total number manufactured estimated at 1,000,000. The gun fired the deadly .58-caliber Minie ball projectile. But the power of the 1861 Springfield rifle musket, combined with the performance and aerodynamic shape of the Minie ball, enabled skilled marksmen to engage targets out to 1,000 yds. Union... Less
More

Quality Cartridge Reloading...

$43.49
MidwayUSA Quality Cartridge Reloading Brass 6mm-06 Springfield Box of 20
+ $4.99 shipping
/quality-cartridge/p6GJ_2rG_f2Ip3TGoqkgeg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Quality Cartridge brass is correctly headstamped in the listed caliber. Because of variations in case size for some specialty cartridges, it is best to check the brass against a fired case from a particular firearm to ensure suitability. Whenever possible, brass has been formed to published standards for the cartridge. This is not loaded ammunition. Preparation: Due to the manufacturing process and/or shipping, case mouths may not be perfectly round. To ensure a round case mouth, cases must be sized (or have the expander ball of the sizing die run through case neck) and deburred/Chamfere d prior to loading. Notes: A light staining may be found on the case neck of new brass. This is due to annealing. Annealing is a process, performed by the manufacturer, which involves rapid heating to a... Less
More

Springfield Armory .45 APC...

$44.99
Academy Sports and Outdoors Springfield Armory .45 APC 10-Round Magazine (0706397872052)
Free Shipping
/springfield-armory-45/lKaHazGfVwRmRiGrxNDQNQ==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Springfield Armory .45 APC 10-Round Magazine features stainless-steel construction and fits the .45 Automatic Colt Pistol (APC).
More

RCBS Precision Mic 30-06...

$44.99
MidwayUSA RCBS Precision Mic 30-06 Springfield
+ $4.99 shipping
/rcbs-precision-mic-3006/qMSN0pMKUS-PMGuzSW9QvA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS Precision Mic is an indispensable tool for safe and accurate loads that help to extend the life of brass. The Precision Mic measures from the datum point on the case shoulder to the base of the cartridge giving the reloader the exact SAAMI tolerance readings. Just a few twists of the Precision Mic and the chambers headspace and bullet seating depth to 0.001 will be determined. Technical Information Fits: Caliber Listed in Description Function: Gives the reloader the rifles chamber headspace and bullet seating depth to 0.001 Notes: Measures from the datum point on the case shoulder to the base of the cartridge
More

Redding Premium Series 2-Die...

$97.99
MidwayUSA Redding Premium Series 2-Die Set 30-06 Springfield
+ $7.59 shipping
/redding-premium-series/dk9mBhgHPJF6vFqPAIVK1w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesCarbide expander buttonMicrometer seater stem2 die set with plastic storage box Redding Reloading Equipment has focused on building the finest quality, American Made products for the precision handloading market since 1946. Redding Reloading Equipment has introduced both Standard Full Length and Deluxe Die Sets with the most popular options already included. Branded as Premium Die Sets these offerings include a Carbide Expander Button and a Micrometer Adjusting Seat Stem. Redding recognized that customers were adding large numbers of these accessories as they increased their reloading knowledge and expectations from their handloaded ammunition. The Carbide Expander Button reduces stress on the case neck and also is free floating which many believe improves overall concentricity... Less
More

Redding Deluxe 3-Die Set...

$126.99
MidwayUSA Redding Deluxe 3-Die Set 30-06 Springfield Ackley Improved 40-Degree Shoulder
+ $8.39 shipping
/redding-deluxe-3die-set/3bR9q1VvUvyhqOoL1Nlfyw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding 3-Die Sets are available for rifle and pistol cartridges. The pistol sets contain a full length sizing die, expander die, and bullet seating die. The rifle sets contain a full length sizing die, neck sizing die, and a bullet seating die. The full length sizing die features a decapping rod assembly with neck expander. The expander die includes a neck expanding plug and the seating die features a built-in crimping ring and seating plug. This combination is sure to produce consistent, reliable ammunition time and time again. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping unit) Expander Die for Pistol Sets and Neck Sizing Die for Rifle Sets Profile or Taper Crimp Seater Die (with built in... Less
More

Fobus Springfield XD...

$36.99
Academy Sports and Outdoors Fobus Springfield XD Rapid-Release Paddle Holster (0676315030423)
Free Shipping
/fobus-springfield-xd/lVU4XqvtzPxptihPIchv1Q==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Fobus Springfield XD Rapid-Release Paddle Holster is made of plastic and activates with the touch of your index finger.
More

BT BT-16 Adjustable Sight Rail

$28.50
ANSgear Paintball BT BT-16 Adjustable Sight Rail
No Shipping Info
/bt-bt16-adjustable-sight/MEMiODgvJaJrsQ5QF-L_kw==/info
ANSgear Paintball
IN_STOCK ( In stock )
Store not rated
This Adjustable Sight Rail is a must when upgrading to any scenario barrel. It will raise your line of sight to match the front sight while updating the look to an M-16/AR-15 type rifle. The Adjustable Sight Rail is a quality aluminum rear sight with windage and elevation settings.This carry handle style sight mounts on dove tail rail systems. Quality thumb nuts secure the Adjustable Sight to the gun and allow for easy installation.
More

RCBS 2-Die Set 30-06...

$29.99
MidwayUSA RCBS 2-Die Set 30-06 Springfield
+ $7.59 shipping
/rcbs-2die-set-3006/F1huAsn6llZ_9wfwkSjJiQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

Redding Master Hunter 2-Die...

$129.99
MidwayUSA Redding Master Hunter 2-Die Set 30-06 Springfield
+ $7.59 shipping
/redding-master-hunter/9rT_4yo9SLc0cYhEejrj8g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Master Hunter die sets were developed after the success of the National Match die sets. Featuring the micrometer adjustable Competition Seating Die and Full Length Sizer Die, this die set helps to produce high quality ammunition to the tightest specifications. The use of a full length sizer die ensures flawless feeding just in case a follow-up shot is required. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Competition Micrometer Seater Die Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Springfield Armory Xdm 19rd...

$28.99
Brownells Springfield Armory Xdm 19rd 9mm Magazine - Xdm 19 Round 9mm Magazine Full Size
+ $7.95 shipping
/springfield-armory-xdm/CJxHkgcgJ2CpHbHaWCYJrw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Long-lasting, stainless steel, high-capacity magazines are made to precise, factory tolerances to ensure maximum firepower and reliability from your Springfield XD pistol. Steel spring and molded polymer follower feed rounds smoothly and reliably to the chamber, every time. Highly polished body won't drag or hang-up during high-speed, tactical reloads. High-impact, polymer, base bad removes easily for cleaning. Numbered witness holes provide quick round count. Compact & sub-compact models fit flush. Mfg: Springfield Armory SPECS: Body - Highly polished stainless steel. Base Pad & Follower - Polymer, black. Capacity: 9mm - 19-rounds.
More

Redding Body Die 30-06...

$31.29
MidwayUSA Redding Body Die 30-06 Springfield
+ $4.99 shipping
/redding-body-die-3006/Bzq9UGd2c6ChVbih6SJf2w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Dies are produced using precise manufacturing processes along with the highest quality components available. Body dies are designed to full length size the case body and bump the shoulder position for proper chambering
More

Redding Trim Die 30-06...

$31.29
MidwayUSA Redding Trim Die 30-06 Springfield
+ $4.99 shipping
/redding-trim-die-3006/F4csbmaV9B-7wqXLW83o_A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Trim Dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. Other manufacturers use sizing die dimensions, forcing you to full length resize when trimming. For case forming and necking brass down from another caliber, Redding Trim Dies can be the perfect intermediate step before full length resizing. Technical InformationMateri al: Steel Die Type: Trim Die ONLY Accessories: Plastic storage case Notes: These trim dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. This die requires an extended shellholder available from Redding. Form die must be purchased separately.
More

RCBS X-Die 2-Die Set 30-06...

$43.29
MidwayUSA RCBS X-Die 2-Die Set 30-06 Springfield Small Base
+ $7.59 shipping
/rcbs-xdie-2die-set/j20LJ_2zuXiV1pFy4eJfTQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The patented X-Die eliminates the need for repeated trimming after an initial case trim of .020 off the maximum case length. A specially designed mandrel contacts the case mouth and reduces the growth rate. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, then stabilize below the maximum case length with no discernable loss of accuracy or case life. Set contains X-Die Full Length Sizer Die and Seater Die. Shellholder sold separately. Technical InformationMateri al: Steel Die Types Included: X-Die Seater Die Accessories: Plastic Storage Case Notes: The RCBS X-Die eliminates the need for repeated... Less
More

Springfield Armory Xd(M) Gear...

$29.99
Academy Sports and Outdoors Springfield Armory Xd(M) Gear Paddle Holster (0706397877194)
Free Shipping
/springfield-armory-xdm/ngGux7vcioxG8hOUyuNrwA==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Springfield Armory XD(M) Gear Paddle Holster is made of KYDEX and mounts to a belt.
More

RCBS X-Die 2-Die Set 30-06...

$43.29
MidwayUSA RCBS X-Die 2-Die Set 30-06 Springfield
+ $7.59 shipping
/rcbs-xdie-2die-set/mTUK110W6G76AG6WNNHXRw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The patented X-Die eliminates the need for repeated trimming after an initial case trim of .020 off the maximum case length. A specially designed mandrel contacts the case mouth and reduces the growth rate. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, then stabilize below the maximum case length with no discernable loss of accuracy or case life. Set contains X-Die Full Length Sizer Die and Seater Die. Shellholder sold separately. Technical InformationMateri al: Steel Die Types Included: X-Die Seater Die Accessories: Plastic Storage Case Notes: The RCBS X-Die eliminates the need for repeated... Less
More

Forster Replacement Decapping...

$12.49
MidwayUSA Forster Replacement Decapping Assembly 30-06 Springfield
+ $4.99 shipping
/forster-replacement/zVRyfYE_tq227Rgwy3SG8w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
A reloader never knows when a part might break. Be prepared for anything with high quality factory replacement parts that will have your Forster Sizing Die resizing cases like new. Technical Information Fits: Forster Sizing Dies Function: Replacement Decapping Assembly Notes: Complete Assembly
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.ad.ipredictive-30407
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.ad.ipredictive-30407