Category

Tools and Accessories
Showing results for "south bend lathe 10 tailstock"
Results 1 - 40 of 1122

Lathe Tailstock Tap/die...

$165.00
eBay Lathe Tailstock Tap/die Holder, South Bend, Atlas
Free Shipping
/lathe-tailstock-tapdie/kw_DHL_Dkeorf7D7SCi6sQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Tailstock Sliding Tap/Die Holder, South Bend, Atlas Lathe A tailstock tap/die holder should be among the first accessories a machinist makes for his lathe, since threading with a hand-held die stock, or holding a tap in a collet is seldom satisfactory. This Tailstock Tap/Die Holder will cut threads with either a tap or a die using a hand held holder that slides on a tailstock mounted arbor. Releasing ones grip allows the tap or die to rotate on the arbor with the spindle. For larger threads tha
More

Telescopic Steady Rest For...

$150.00
eBay Telescopic Steady Rest For South Bend 10k 10 Lathe
+ $12.14 shipping
/telescopic-steady-rest/7cewnmuL-iJQW430UuaV6g==/info
eBay
IN_STOCK ( In stock )
New telescopic steady rest made specifically to fit a South Bend 10K Light 10 lathes. (will not fit the heavy 10 model). You can ID a 10k by its serial number on the top of the bed near the tailstock. It will have a number followed by some letters. The first letter will be a K. This is my own design, unavailable anyplace else. Frame is Cast Iron. Entire assy weighs over 10 pounds. Very nice quality at a fraction of the cost of a used original. Some basic dimensions.. 5 Tall from flat way up
More

10 Pc 6k Lathe Collet Set For...

$162.00
eBay 10 Pc 6k Lathe Collet Set For South Bend 10k
+ $11.07 shipping
/10-pc-6k-lathe-collet-set/0aQuJO8tYQ3-PwPznrfNsA==/info
eBay
IN_STOCK ( In stock )
Tools4cheap Exclusive!! Brand New 10pc 6K Collet set for use with South Bend 10K lathes.I have these custom made for me and they are unavailable from anyone else. Sizes are 1/16 thru 5/8 by 1/16 increments. 10pc total.These will fit directly into the spindle of the South Bend 10k (light 10) lathes. You can tell you have a 10K because 1) It will have a key in the spindle(might be hard to see) and 2) The serial number on the top of the bed on the tailstock end will have a number followed by so
More

South Bend Lathe SB1345...

$69.31
Sears Marketplace South Bend Lathe SB1345 Rocker Tool Post for 9-12-Inch Lathes
No Shipping Info
/south-bend-lathe-sb1345/uDgAJVgXkBkCmtiNPk42Xw==/info
Sears Marketplace
IN_STOCK ( In stock )
South Bend Lathe SB1345 Rocker Tool Post for 9-12-Inch Lathes
More

9 South Bend Lathe Half Nuts

$255.00
eBay 9 South Bend Lathe Half Nuts
Free Shipping
/9-south-bend-lathe-half/XSVmeMgwdX_WA1f2YEWgGw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
New old stock set of 9 south bend lathe half nuts. Shipping is FREE to U.S. Thanks Mike
More

13 South Bend Lathe Half Nuts

$365.00
eBay 13 South Bend Lathe Half Nuts
Free Shipping
/13-south-bend-lathe-half/sriX9mlKMuJpIC1wh4sm2w==/info
eBay
IN_STOCK ( In stock )
Free Shipping
NOS 13 south bend lathe half nuts. Shipping is FREE to U.S. Thanks for looking.
More

Southbend Lathe 3/4 Tailstock...

$79.95
eBay Southbend Lathe 3/4 Tailstock Chuck Mt3 South Bend
+ $9.85 shipping
/southbend-lathe-34/yIG4chBivo3R5OEu_hfRBw==/info
eBay
IN_STOCK ( In stock )
Click here to get eBay selling tools at Auctiva.com Questions?? Call our store 732-770-2193 or email Brand new heavy duty 3/4 inch drill chuck (see pictures)Fits Southbend,Logan Atlas,Craftsman,El gin and many other small to mid size metal lathes with MT-3 tailstock... Great for all those larger then 1/2 inch bits. No waiting and bidding just buy it now!..All our parts are ALWAYS in stock and ready to ship..You will receive your parts in 1-3 business days in a medium flat rate priority box in the
More

South Bend Lathe SB1333 R-8...

$37.63
Sears Marketplace South Bend Lathe SB1333 R-8 Collet, 1/8-Inch - Lathes
No Shipping Info
/south-bend-lathe-sb1333/-54N1tm_vttRcAVv2EHKtQ==/info
Sears Marketplace
IN_STOCK ( In stock )
South Bend Lathe SB1333 R-8 Collet, 1/8-Inch - One-piece Construction And Made From The Best Materials, These R-8 Collets Have The Edge In Performance Over The Run-of-the-mill Standards Found In The Market Today. Total Indicated Runout Is Less Than 0.00059-inch. Made To Exact Specifications Using Carefully Chosen Materials, These Collets And Sleeves Will Give You Accurate And Durable Service. Hardened To 55-60 (rockwell C) On All Clamping Surfaces And 40-45 On The Body Spring Portions, They Are Then Precision Ground To Fit Your Fixture, Socket Or Holder To Better Than Industry Standards.
More

South Bend Lathe SB1373...

$66.96
Sears Marketplace South Bend Lathe SB1373 3/4-Inch by JT4 Drill Chuck
No Shipping Info
/south-bend-lathe-sb1373/6-s0ddXMm8L1mCqbUkUFOA==/info
Sears Marketplace
IN_STOCK ( In stock )
South Bend Lathe SB1373 3/4-Inch by JT4 Drill Chuck
More

South Bend Lathe SB1351 MT...

$474.69
Sears Marketplace South Bend Lathe SB1351 MT No.3 Quick Change Collet, 16-Piece
No Shipping Info
/south-bend-lathe-sb1351/ONdhyRLqBGuMx8vo3h_nkg==/info
Sears Marketplace
IN_STOCK ( In stock )
South Bend Lathe SB1351 MT No.3 Quick Change Collet, 16-Piece
More

Southbend Lathe 1/2 Tailstock...

$34.95
eBay Southbend Lathe 1/2 Tailstock Chuck Mt2 South Bend
+ $6.85 shipping
/southbend-lathe-12/2vWF_mt8LMjBlVPZw6APJg==/info
eBay
IN_STOCK ( In stock )
Questions?? Call our store 908-241-2885 or email Brand new 1/2 inch drill chuck for South bend,Logan Atlas,Chraftsman and many other small to mid size metal lathes with MT-2 tailstock... Large heavy duty drill press size chuck. Not a small size hand drill 1/2 chuck like most others on ebay. No waiting and bidding just buy it now!
More

South Bend Steady Rest For...

$198.98
eBay South Bend Steady Rest For 10k Lathe & Possibly Other 10 Lathes Sb1450
No Shipping Info
/south-bend-steady-rest/_ADhnskkPNFwd0AAO7Da4w==/info
eBay
IN_STOCK ( In stock )
This is a SOUTH BEND Steady Rest # SB1450 for use with the South Bend SB1002 10K 10 metal lathe and possibly other 10 lathes.Although this rest is specifically designed for the South Bend 10K lathe, it can probably be field modified for use on other 10 lathes.The rest incorporates the superb fit finish you expect from South bend, including precise fine adjustments for accurate centering.The bottom of the base is 3-3/4 x 1-5/16. The distance from the center of the flat to the center of the
More

South Bend Lathe SB1376...

$123.36
Sears Marketplace South Bend Lathe SB1376 5/8-Inch by JT6 Keyless Chuck
No Shipping Info
/south-bend-lathe-sb1376/dsQGKO9TyihCcgATdSm1GQ==/info
Sears Marketplace
IN_STOCK ( In stock )
South Bend Lathe SB1376 5/8-Inch by JT6 Keyless Chuck
More

South Bend Follow Rest For...

$139.94
eBay South Bend Follow Rest For 10k Lathe & Possibly Other 10 Lathes Sb1451
No Shipping Info
/south-bend-follow-rest/4im1s3xmh9lJR1HDQDi7-Q==/info
eBay
IN_STOCK ( In stock )
This is a SOUTH BEND Follow Rest # SB1451 for use with the South Bend SB1002 10K 10 metal lathe and possibly other 10 lathes.Although this rest is specifically designed for the South Bend 10K lathe, it can probably be field modified for use on other 10 lathes.The mounting holes are clearance drilled for 5/16 bolts (included) and are spaced about 2-9/16 center to center. The picture of the 10K carriage cross slide are only included for mounting reference.Please study the pictures and email
More

Steady Rest For South Bend...

$150.00
eBay Steady Rest For South Bend Heavy 10 Lathe
+ $12.14 shipping
/steady-rest-for-south/rWu2eL4aasoq84Ku0U6XGA==/info
eBay
IN_STOCK ( In stock )
New telescopic steady rest made specifically to fit a South Bend Heavy 10 lathes. This is my own design, unavailable anyplace else. Frame is Cast Iron. Entire assy weighs over 10 pounds. Very nice quality at a fraction of the cost of a used original. Some basic dimensions.. 5 Tall from flat way up to center. Aprox 4-3/4 overall width. 1.87 horizontal offset from V Way top to centerline.
More

South Bend Lathe SB1332 Round...

$39.23
Sears Marketplace South Bend Lathe SB1332 Round 5-C Collet, 3/4-Inch - Lathes
No Shipping Info
/south-bend-lathe-sb1332/6ca4mzVYjZzMMDOZIqLI8Q==/info
Sears Marketplace
IN_STOCK ( In stock )
South Bend Lathe SB1332 Round 5-C Collet, 3/4-Inch - These Are Made With The Best Materials And Ground To Better Than Industry Standard Tolerances. Total Indicated Runout Is Less Than 0.00059-inch. Made To Exact Specifications Using Carefully Chosen Materials, These Collets And Sleeves Will Give You Accurate And Durable Service. Hardened To 55-60 (rockwell C) On All Clamping Surfaces And 40-45 On The Body Spring Portions, They Are Then Precision Ground To Fit Your Fixture, Socket Or Holder To Better Than Industry Standards.
More

14.5 South Bend Lathe...

$235.00
eBay 14.5 South Bend Lathe Crossfeed Taper Attachment Leadscrew
Free Shipping
/145-south-bend-lathe/-Dd0jmNwcSadLPZSpHFvuQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
14.5 south bend lathe cross feed leadscrew.If you have a worn leadscrew and would like a quote on getting it rebuilt give me a call or text at 913 636 6107.Shipping is FREE to U.S. Thanks for looking.
More

Follow Rest For South Bend...

$120.00
eBay Follow Rest For South Bend 10k / Heavy 10 Lathe
+ $11.30 shipping
/follow-rest-for-south/DS0y5qMZ-KyU5NMXWrSu1w==/info
eBay
IN_STOCK ( In stock )
New follower rest designed to fit South Bend 10K or Heavy 10 lathes. High quality casting took well over a year to perfect. I notice the jam nuts are a bit too thick so the bolts cant go in enough to close the jaws completely. I would grind the nuts down
More

7 x 12 Mini Metal Lathe

$625.00
Sears 7 x 12 Mini Metal Lathe
No Shipping Info
/7-x-12-mini-metal-lathe/aYYaQeU4SkVQMQuUFERKkA==/info
Sears
IN_STOCK ( In stock )
Store not rated
Powered by a 3/4 HP motor, this lathe also features: variable speeds (0-2500 RPM), inch and metric reading dials, turret tool post, chip tray & splash guard. Features: Variable Speed 16 TPI Reversible Leadscrew Forward and reverse in all speeds Chip Tray & Backsplash Guard Threading Dial Indicator Standard & Metric Graduation Made in an ISO 9001 factory Specifications: Swing over bed: 7 Distance between centers: 12 Bore Size of Included Chuck: 16mm Spindle bore: 20mm Spindle nose taper: MT #3 Tailstock taper: MT #2 Tailstock travel: 2-1/2 Cross-slide travel: 2-3/4 Maximum tool bit size: 5/16 Speed range: Low Range: 0-1100 RPM, High Range: 0-2500 RPM Range of threads: 12-52 TPI Motor: 3/4 HP, 110V, single-phase Number of thread pitches: 18 inch & 10 metric Net weight: 74 lbs. Shipping... Less
More

South Bend Lathe Sb1295...

$56.10
eBay South Bend Lathe Sb1295 4-inch Speed Handle
Free Shipping
/south-bend-lathe-sb1295/ynsYfx-tpOstjQ3o2RFTDA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
South Bend Lathe SB1295 4-Inch Speed Handle Features Speed Handles improve the efficiency of milling vises with straight handles Simply replaces the stock handle on your milling vise Fits 9/16 hexagonal shafts Details Brand: South Bend Lathe Manufacturer: South Bend Lathe Model: SB1295 Number of items: 1 Package Dimensions Height: 3.00 inches Length: 11.20 inches Width: 9.50 inches Weight: 1.65 pounds Publisher: South Bend Lathe PLEASE READ THE ENTIRE AD The estimated delivery dates are not fi
More

Steady Rest For South Bend 16...

$170.00
eBay Steady Rest For South Bend 16 Lathe
+ $15.22 shipping
/steady-rest-for-south/Az4_GmvODfnOnz6yeT9aiA==/info
eBay
IN_STOCK ( In stock )
Telescopic Steady Rest to fit South Bend 16 lathe. Heavy cast iron construction.. Aprox 4-3/4 thru hole Note: The center of the rests hole is at 8 above the lathes flat way. The sb16 is closer to 7-7/8 so the hole will be slightly high. However the finger on top should extend beyond center slightly to still allow you to center the fingers. Also the hole is taller then wide anyway. It will effect the smallest and largest capacity though. You could remedy this by making a offset set of brass f
More

Metric Transposing Gears For...

$200.00
eBay Metric Transposing Gears For South Bend Heavy 10 Lathe
+ $12.14 shipping
/metric-transposing-gears/b-ieO_xmBGazlkJAQkMF6g==/info
eBay
IN_STOCK ( In stock )
New Tools4cheap exclusive! Set of replacement metric transposing gears I designed to fit South Bend Heavy 10 lathes with double tumbler quick change gear boxes. Set includes: 100/127 transposing gear and the following stud gears: 48,44,40,36,32,28 , 26 tooth. These are the same gears South Bend used to supply + the 40 tooth. The lathes originally came with the 40 tooth but I included it in my set anyways in case it was lost. Will not work on Single Tumbler Heavy 10 lathes or 10 lathes with no
More

South Bend Lathe Dial...

$64.95
eBay South Bend Lathe Dial Indicator And Clamp For 9&10k
+ $10.78 shipping
/south-bend-lathe-dial/5KPeCNawVP5wsPUDVk7j7g==/info
eBay
IN_STOCK ( In stock )
Z-axis dial indicator and clamp for South Bend 9 and 10K (10) lathes. (Also works on Logan model 820 and model 200 lathes.)Gauge clamp and 0 to 1 dial gauge allows for precision indication of the carriage location (Z axis) on South Bend Lathes.Included: Billet machined gage clamp, polished 6061-T6 aluminum, precision hinge, and wing screw 0 to 1 precision dial gauge with 0.0010 graduation and revolution counter Instruction sheet Also available for less on eBay without the dial indicator:
More

Steady Rest For South Bend...

$170.00
eBay Steady Rest For South Bend 14-1/2 Lathe
+ $15.22 shipping
/steady-rest-for-south/vhHWDbs2XMz774OIFb3YJQ==/info
eBay
IN_STOCK ( In stock )
Telescopic Steady Rest to fit South Bend 14-1/2 lathe. Heavy cast iron construction.. Thru hole aprox 4-3/4Note: Please do not email to ask if this will fit any other lathe. It will not unless you make your own base adapter and clamp. I have been asked this 2-3x a week on my dozen or so models for the past 5+ years, yet nobody has ever found one to fit anything other than what it was designed for. Every lathe is a little different. On this model a key dimension is the offset from the V to the
More

South Bend Lathe 13 Steady...

$58.00
eBay South Bend Lathe 13 Steady Rest Jaws / Fingers With Bearings
No Shipping Info
/south-bend-lathe-13/K5YOPygE-HPG2z2pXuuapQ==/info
eBay
IN_STOCK ( In stock )
FREE SHIPPING IN US! South Bend Lathe 13 Steady Rest Jaws / Fingers with Bearings New Steady Rest Jaws / Fingers with Roller Bearings for South Bend 13 Lathes. Take those oily messy cast iron fingers out and replace them with these smooth running roller bearings! [1] Set of 3 Fingers - they are 1/2 x 1 and 3 long with 1/2 diameter shielded bearings. Replaces part PT128T1. Designed for full range of motion. Check out my other listings for more Atlas, Craftsman and South Bend Lathe parts! I
More

South Bend Lathe 9 & 10 Cross...

$36.00
eBay South Bend Lathe 9 & 10 Cross Slide Feed Nut As65nk1
Free Shipping
/south-bend-lathe-9-10/uehOeUzCBBSyCI8zNqQM9Q==/info
eBay
IN_STOCK ( In stock )
Free Shipping
FREE SHIPPING IN US!! South Bend Lathe 9 10 Cross Slide Screw Feed Nut AS65NK1 New Cross Slide Nut for South Bend 9 10 Lathes without taper attachment. South Bend Part Number AS65NK1 ACME 7/16 x 10 Left Hand Threads 11/16 diameter stem Check out my other listings for more Atlas, Craftsman and South Bend Lathe parts! International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Plea
More

South Bend Lathe Maintenance...

$7.95
eBay South Bend Lathe Maintenance Pamphlets - Reprint
+ $4.85 shipping
/south-bend-lathe/3Bps4vIvhzmoRNo7-h0Ygg==/info
eBay
IN_STOCK ( In stock )
South Bend Lathe Works Lathe Maintenance Pamphlets: Keep Your Lathe Clean, The Installation and Leveling of the Lathe, Oiling the Lathe , originally published by the South Bend Lathe Works, 1940s, South Bend, Ind. Reprinted by Lindsay Publications, Bradley, IL, 2010. 5½ x 8½ paperback, 56 pages. ISBN 1-55918-386-1. Lindsay gives us three of the four South Bend lathe maintenance pamphlets bound in one, handy little book. (The fourth one, Keep Your Lathe in Trim , Lindsay reprinted a number of
More

Rebuild Book & Kit For South...

$77.95
eBay Rebuild Book & Kit For South Bend Lathe 10l heavy 10
Free Shipping
/rebuild-book-kit-for/CUYLZNhwRdwU62uqe0QckA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Rebuild Book and Kit for South Bend Lathe Model 10L 10R Made in the USA by ILION Industrial Services, LLC - Important: This combination kit is for the 10L, 10R,Heavy 10 models only- If you are contemplating cleaning up that old South Bend 10L or 10R sitting in your garage, this combination kit with manual and aftermarket consumable parts is what you will need to get the job done. The 10L and 10R are industrial grade lathes which are often referred to as a Heavy 10 to differentiate them from
More

South Bend 9 Inch Lathe...

$259.99
eBay South Bend 9 Inch Lathe Complete 3c Collet Set+nose Protector 10 Collets
+ $12.00 shipping
/south-bend-9-inch-lathe/qSWzapLkh-P0xQ6nTKjxfA==/info
eBay
IN_STOCK ( In stock )
NEW SOUTH BEND 9 INCH LATHE COMPLETE 3C COLLET SET+NOSE PROTECTOR 10 COLLETS NEW Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge NEW FROM MYMACHINESHOP. NET USA MADE 3C COLLET DRAWTUBE, 1 1/2-8 NOSE PROTECTOR WITH 3C ADAPTER AND 10 IMPORT 3C COLLETS FROM 1/8-1/2. THANKS, AND VISIT MY EBAY STORE. http://stores.shop .ebay.com/My-Machi ne-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE, WEIGHT AND COMPATABILITY I ACCEPT PAYPAL AND LOCAL PICK-UP DO NOT DUPLICATE OR
More

Rebuild Book For South Bend...

$36.95
eBay Rebuild Book For South Bend Lathe 10l,13,14.5 & 16
Free Shipping
/rebuild-book-for-south/KahOi9ZXdOO2XcXGi2v2rA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Rebuild Manual For South Bend 10L, 10R,13, 14 1/2, 16 Industrial Lathes Published in the USA by ILION Industrial Services, LLC Just arrived from the printer! Introducing a new publication for the South Bend Lathe enthusiast from ILION Industrial Services: A Guide to Renovating the South Bend Lathe for Models 10L and 10R (known as the Heavy 10), 13 14.5 and 16. The manual is a bound 8.5 x 11 soft cover, 156 pages in length and is fully illustrated with over 450 B W photographs plus step
More

Rebuild Manual & Kit For...

$65.95
eBay Rebuild Manual & Kit For South Bend Lathe - Model 10k
Free Shipping
/rebuild-manual-kit-for/c3_7M-sHEVm4XN21MjNw8Q==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Rebuild Manual & Kit for Model 10k South Bend Lathes New Expanded Manual Now Covers the 9 and 10k Lathes! If you are contemplating a spring cleaning for that old South Bend sitting in the garage, this is what you will need to get the job done. For owners
More

Face Plate For South Bend 9 -...

$110.00
eBay Face Plate For South Bend 9 - Atlas Lathe 1-1/2-8
+ $12.80 shipping
/face-plate-for-south-bend/m2YTXnjlSMPpg5162R3o5Q==/info
eBay
IN_STOCK ( In stock )
Brand new in the box. Custom made Tools4cheap face plate with 5/16-18 tapped holes and 7/16 wide slots. 1-1/2-8 threaded mount. This is a 8.5 diameter faceplate. It will fit many lathes including South Bend 9 A,B,C, 10K, Atlas 10, 12, Many Logan, Etc... A Tools4cheap exclusive! Ship weight 14-15 pounds
More

South Bend Lathe Sb1346...

$54.33
eBay South Bend Lathe Sb1346 Rocker Tool Post For 13-inch Lathes
Free Shipping
/south-bend-lathe-sb1346/Et4X76hJS3a6Njg_qaYtWg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
South Bend Lathe SB1346 Rocker Tool Post for 13-Inch Lathes Features Precision made for precision results Adjustable rake angle Accepts 5/8-Inch wide tool holders T-nut size is 2-Inch square by 5/16-Inch thick Details Brand: South Bend Lathe Manufacturer: South Bend Lathe Model: SB1346 Number of items: 1 Package Dimensions Height: 3.20 inches Length: 6.00 inches Width: 3.30 inches Weight: 1.85 pounds Package quantity: 1 Publisher: South Bend Lathe One-day Shipping service option includes 1-busi
More

Drive Bearing Kit For South...

$26.95
eBay Drive Bearing Kit For South Bend Lathe 9 & 10k
Free Shipping
/drive-bearing-kit-for/HcNUihyrgaJc3UZx1jmSsQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Drive Bearing Replacement Set for South Bend 9 Model A,B,C and 10k Lathes By ILION Industrial Services, LLC Please note that these bearings are all original new stock and they are sold as a set only. The price listed above is for ONE Complete Set of 4 bearings. If you are rebuilding your lathe, please take a moment to look through our other listings for a completely illustrated manual on how to rebuild your lathe and drive train. If the drive on your South Bend Lathe 9 model A,B,C or model 10
More

South Bend Lathe Dial...

$44.95
eBay South Bend Lathe Dial Indicator Clamp For 9&10k
+ $5.25 shipping
/south-bend-lathe-dial/_1fVLbYxnhnOJd6bRZh25A==/info
eBay
IN_STOCK ( In stock )
Z-axis dial indicator clamp for South Bend 9 and 10K (10) lathes. (Will also work on LOGAN model 820 and model 200 Lathes.)CLAMP ONLY! THE DIAL INDICATOR IS NOT INCLUDED. FOR CLAMP WITH DIAL INDICATOR GO TO:http://cgi.ebay .com/South-Bend-la the-dial-indicator -and-clamp-9-10K- /260685415126? pt=LH_DefaultDoma in_0 hash=item3cb20fc2 d6 Gauge clamp allows for precision indication of the carriage location (Z axis) on South Bend Lathes.Included: Billet machined gage clamp, polished 6061-T6 aluminum, pr
More

Telescopic Steady Rest For...

$150.00
eBay Telescopic Steady Rest For South Bend 9 Lathe
+ $12.14 shipping
/telescopic-steady-rest/ntX-PxqUbLER-vD1_E7lIA==/info
eBay
IN_STOCK ( In stock )
New telescopic steady rest made specifically to fit a South Bend 9 workshop lathes, Models A, B, C. (will not fit the older Wide bed/Junior model). This is my own design, unavailable anyplace else. Body is cast iron, weighs aprox 10 pounds. Pictured on a Model A underdrive 9 here in the shop. (No the lathe is not included!) Some basic dimensions.. 4.6 Tall from flat way up to center. Aprox 3.9 overall width. 1.5 horizontal offset from V Way top to centerline. See my other auctions for my H
More

Adj. Tailstock For 8 & 10...

$99.95
Sears Marketplace Adj. Tailstock For 8 & 10 Rotary Tables
No Shipping Info
/adj-tailstock-for-8-10/T7bjDkK7UuSASLWSywrCvQ==/info
Sears Marketplace
IN_STOCK ( In stock )
This Adjustable Tailstock provides the support you need for longer workpieces.
More

Mini Wood Lathe Tailstock, 8...

$27.50
eBay Mini Wood Lathe Tailstock, 8 Swing X 1-1/2 Travel, Mt1 Bore
No Shipping Info
/mini-wood-lathe/RXhd2JdXlSBU-dE6G5TPpA==/info
eBay
IN_STOCK ( In stock )
This is a brand new Mini Wood Lathe Tailstock with Eccentric Locking Mechanism . This tailstock is new but will come in generic packaging. Here are the specifics:Mini wood lathe tailstock Cast iron construction with structural plastic adjusting knob - nicely machined and finished For mini lathe with 8 swing With eccentric locking mechanism quick release handle to secure tailstock to bed Spindle has a MT1 bore and travels 1-9/16Base is 2-3/8 square The key is 31/32 wide to fit a lathe bed wi
More

Rebuild Manual For South Bend...

$36.95
eBay Rebuild Manual For South Bend Lathe 10l - Heavy 10
Free Shipping
/rebuild-manual-for-south/Gr3gNBNtHy5dV8R7O4o7SA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Rebuild Manual For South Bend 10L or 10R Heavy 10Industrial Lathes Published in the USA by ILION Industrial Services, LLC Just arrived from the printer! Introducing a new publication for South Bend Lathe enthusiasts: A Guide to Renovating the South Bend Lathe for Model 10L (known as the Heavy 10). Also covers the 13 14.5 and 16 lathes as well. The manual is a bound 8.5 x 11 soft cover, 156 pages in length and is fully illustrated with over 450 B W photographs plus step-by-step instructi
More

South Bend Lathe 9 & 10 With...

$40.00
eBay South Bend Lathe 9 & 10 With Taper Attachment Cross Slide Feed Nut Pt486nk1
Free Shipping
/south-bend-lathe-9-10/XeInpv62d0Ua2YctYEBepw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
FREE SHIPPING IN US!! South Bend Lathe 9 10 with Taper Attachment Cross Slide Screw Feed Nut PT486NK1 New Plat Top Cross Slide Nut for South Bend 9 10 Lathes WITH taper attachment. South Bend Part Number PT486NK1 ACME 7/16 x 10 Left Hand Threads Check out my other listings for more Atlas, Craftsman and South Bend Lathe parts! International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibil
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Most Popular In Tools and Accessories

Copyright © 2000-2014 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145