Class D Monoblock 1100W ZZR Series Car Amplifier

1200W 2-Channel Class-A/B Car Amplifier

Sound Storm Laboratories is a multi-million dollar full-line car audio manufacturer. Sound Storm was established in 1997 by a group of car audio professionals whose goal was to bring exciting product designs to the mobile electronics market at affordable prices. This ¿more-bang-for-the -buck¿ philosophy was incorporated into every aspect of the company. The CR1400.2 two channel amplifier kicks out an impressive 1400 watts of maximum power. The built in variable low pass crossover and variable 0 to +18dB Bass Boost allows you to tune your bass just how you like it. For high quality product at an affordable price, give SoundStrorm a try!

Roswell Wake Air 500.1 Amp Rma Amplifier . The RMA 500.1 is a true power house mono amplifier that packs the hardest punch in the smallest package in its class with true 500 watt RMS power. Fine tuning adjustment can be made with the supplied remote gain control. Features High efficiency Class G/H Internal fan Reversed heat sinks to dissipate heat Fully marinized with water repellant and anti corrosion spray on circuit board Remote GAIN control (supplied) Advanced Diagnostic System Small installation foot print Specifications POWER OUTPUT 4? - 312 Watts X 1 14.4V POWER OUTPUT 4? - 509 Watts X 1 14.4V TOTAL HARMONIC DISTORTION - 0.05% FREQUENCY RANGE - 20Hz-200Hz CROSS OVER RANGE - 30Hz-2000Hz BASS BOOST - 0-15Db 30Hz-125Hz S/N RATIO (a WTG) REF 4? - >82Db OVERALL DIMENSION - 11.7... Less

mono subwoofer amplifier * 150 watts RMS x 1 at 4 ohms (300 watts RMS x 1 at 2 ohms) * Dynamic Thermal Management cooling system * variable high- and low-pass filters (50-500 Hz, 12 dB/octave) * variable bass/treble boost (0-18 dB at 45 Hz, 0-12 dB at 12K Hz) *

This is a VR3 VRA2.0 200 watt, 2-channel car audio amplifier. This 200 (50 Watts RMS x 2 @ 4 Ohm) watt amplifier features an adjustable 3-position (Bass, Treble, Flat) crossover. It is ideal for driving a single subwoofer or a pair, or you can also use it run your highs or component system. By being equipped with this built-in crossover (50 Hz - 250 Hz), you won't have to spend extra money on additional crossovers. This MOSFET amplifier also has a RCA line input and line output, which can be used for daisy chaining additional amplifiers. Additionally, the adjustable sensitivity and bass boost dials, allow you the flexibility to dial in the perfect amount of bass to suit your car stereo system. This unit has been remanufactured to 100% of its original factory specifications.

SquareTrade AP6.0

The Alpha series 1 Ohm mono amplifier is equipped with the following features: Class “AB” circuitry, rated at 14.4 volts, 1 x 1000w – 4 ohms, 1 x 2000w- 2 ohms, 1 x 4000w - 1 ohms,QSINK heat management system, Buffered pre-amp input circuitry, Continuously Variable 12dB Low Pass X-over, Continuously Variable 12dB bass boost -45Hz, Continuously Variable Subsonic Filter (15-55Hz) (Mono Amps), Direct-connect integrated Speaker and Power wire Terminals, Full Range RCA Line Outputs for easy Daisy chain configuration, Variable Input Level Control, DC-DC PWM power supply, DC Short Circuit Protection, Bass Remote capability, Fuse type: Maxi 2 x 60 amp

This amplifier features 250 watts of power at 2 ohms for powerful audio. The 25-200Hz frequency response offers reliable sound reproduction.

1_ STABLESWITCHABLE INPUT SENSITIVITY: 100 MV 2V OR 2V 8VSWITCHABLE PHASE SHIFT (0 180)VARIABLE BASS BOOST (0 18 DB)CONTINUOUSLY VARIABLE LOWPASS CROSSOVERVARIABLE SUBSONIC FILTER (15 HZ 40 HZ)LOW LEVEL INPUTS & OUTPUTSPOWER & PROTECTION LEDSHEAVY DUTY SET-SCREW STYLE TERMINALSCHROME- PLATED CONNECTIONSILLUMI NATED LOGOSIGNAL-TO-NOIS E RATIO: 105 DBFREQ RESP: 20 HZ 250 HZDIM: 18L X 10W X 2.19H5000W MAX1800W X 1 @ 4_2500W X 1 @ 2_3500W X 1 @ 1_UPC : 636210103738Shipp ing Dimensions : 22.30in X 12.20in X 4.80inEstimated Shipping Weight : 14.15

Slick Amplifiers are capable of serious power output, stunning sound quality and at a price most people believe is impossible for such a high powered amplifier. The 2 Channel Slick A0 and 4 Channel Slick A1 use Class AB technology for low noise and minimal distortion to give your speakers superior sound quality. The High Pass and Low Pass Filters ensure your speakers only receive the frequencies they were designed to handle for a longer product life. The Slick A7 is a Class D Monoblock Bass Amplifier capable of hitting 1300 watts at peak power. Engineered using VIBE Audio's Bass Enhance technology, the A7 boosts EQ to overcome road noise. The Slick A7 also features Low Pass and Subsonic Filters to output a cleaner bass signal free from unneeded frequencies that only waste amplifier power... Less

1230 Watts x 1 @ 4 Ohm Stereo 1950 Watts x 1 @ 2 Ohm Stereo; 3380 Watts x 1 @ 1 Ohm idged; 3380 Watt Total Output; Frequency Response: 22Hz~165Hz/10Hz~2 50kHz; Input Sensitivity: 200 mV ~ 8V; Signal-to-Noise Ratio: >90dB; Electronic Crossover: 50Hz-250Hz; Bass Boost Circuit 0~18dB; Nickel Plated RCA Inputs; Low Pass Filter Controls; Subwoofer Remote Level Control; Heavy Duty Power Aluminum Heat sink; Fan Cooled; Power and Protection LED Indicators; Soft Turn-on/Turn-off; Remote Bass Control; Master/Slave Compatible; Fuses: 3 x 30 Amp; Dimensions: 10''W x 3.38''H x 16.88''L

Roswell Wake Air 500.4 Amp Rma Amplifier . This RMA marine amplifier uses a Full Range Class G/H topography that significantly improves efficiency while enhancing sound quality. Formulated coating to protect your investment. Class G/H amplifiers make more power for their size than traditional designs and offer much lower THD and higher damping factors than Full Range Class D amplifiers. Features High efficiency Class G/H Internal fan Reversed heat sinks to dissipate heat Fully marinized with water repellant and anti corrosion spray on circuit board Expandable for multiple units Multi application Crossover Controls Advanced Diagnostic System Small installation foot print Specifications POWER OUTPUT 4? - 75 Watts X 4 14.4V POWER OUTPUT 4? - 125 Watts X 4 14.4V TOTAL HARMONIC DISTORTION -... Less

BRIDGEABLE TRIMODE OPERATIONINPUT SENSITIVITY SELECTORVARIABLE BASS BOOST (0 18 DB)CONTINUOUSLY VARIABLE HIGH PASS & LOW PASS CROSSOVERSLOW & HIGH LEVEL INPUTSPOWER & PROTECTION LEDSHEAVY DUTY SET-SCREW STYLE TERMINALSCHROME- PLATED CONNECTIONSILLUMI NATED LOGOSIGNAL-TO-NOIS E RATIO: 102 DBFREQ RESP: 20 HZ 20 KHZDIM: 19.94L X 10W X 2.19H5-CHANNEL1800 W MAX420W X 2 @ 4_ BRIDGED210W X 4 + 420W X 1 @ 2_UPC : 636210103769Shipp ing Dimensions : 23.90in X 11.80in X 4.10inEstimated Shipping Weight : 14.75

THD: 0.5% Bridging Synchronization Nickel Plated Power And Speaker Terminals Variable Subsonic Filter 15-40Hz Phase Switch 0-180 Frequency response 15-150 Hz System Distress Indicator 4-Way Protection Circuitry Remote Bass Control Included Dimensions: 17.5" L x 10.3" W x 2.4"H

Brand New Re Audio XTX3000.1 3000 Watt XTS Series Monoblock Car Amplifier Features: XTX Series Monoblock Full Digital Car Amplifier Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Wired remote included Selectable bass boost with frequency control (0-12 dB at 30-80 Hz) Single channel operation 2-Way System Protection circuitry (thermal and short circuit) Heavy duty brushed aluminum alloy convection cooled heatsink for efficient heat dissipation Nickel-plated RCA level inputs Nickel-plated 8-18AWG screw terminals

Phantom Series Class D Monoblock Car Amplifier Max Power Rating: 2 ohms: 3500 watts x 1 chan. 1 ohm: 5000 watts x 1 chan. RMS power output: 1800 watts x 1 chan. Mosfet PWM (Pulse Width Modulated) power supply Wired remote subwoofer level control included LED Power and protection indicators Bass Boost allows further flexibility of the subwoofer with a variable of 0-18 dB Variable input gain control for more precise adjustments Remote turn-on/turn-off circuit Soft turn on circuit Input voltage sensitivity selector Thermal, overload and speaker short protection DataLink allows two identical Phantom Class D amps to be strapped togeather Phase Shift selector Black anodized heatsink Gold-plated RCA low level inputs Nickel-plated speaker and power terminals... Less

The Alpha series 1 Ohm mono amplifier is equipped with the following features: Class “AB” circuitry rated at 14.4 volts 1 x 500w – 4 ohms 1 x 1000w- 2 ohms 1 x 2000w - 1 ohms QSINK heat management system Buffered pre-amp input circuitry Continuously Variable 12dB Low Pass X-over Continuously Variable 12dB bass boost -45Hz Continuously Variable Subsonic Filter (15-55Hz) (Mono Amps) Direct-connect integrated Speaker and Power wire Terminals Full Range RCA Line Outputs for easy Daisy chain configuration Variable Input Level Control DC-DC PWM power supply DC Short Circuit Protection Bass Remote capability Fuse type: Maxi 2 x 50 amp