Category

Motorcycle Parts and A...
Showing results for "snowmobile handlebar riser"
Results 1 - 40 of 1500+

V-Twin Manufacturing Curved...

$92.99
J&P Cycles V-Twin Manufacturing Curved Handlebar Riser Set
+ $7.99 shipping
/vtwin-manufacturing/MCbObwurB-7c01-HeJQgMQ==/info
J&P Cycles
IN_STOCK ( In stock )
Chrome curved riser set features pullback styling and machined slots Uses 1/2-13 thread bolts, sold separately Features rise and pullback to get you to the best riding position V-Twin Manufacturing Curved Handlebar Riser Set
More

SW-MOTECH Handlebar Risers...

$89.95
RevZilla.com SW-MOTECH Handlebar Risers Yamaha XT1200 Super Tenere 2010-2013
Free Shipping
/swmotech-handlebar/J7LInZn1RFa4BFZlTXS1qA==/info
RevZilla.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
SW-MOTECH Handlebar Risers for Yamaha XT1200 Super Tenere Provides a more upright, comfortable riding position by raising the original handlebar by approximately 25mm (1 inch). No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. No change of control cables, wiring, or hoses is required. It is recommended that the installer should check for adequate cable/wiring/hose slack during installation. Note: Yamaha Super Tenere stock handlebar clamps are 1.125 (28mm).You might also like: Sw Motech, Hand Controls & Mirrors, Adv/Touring Parts, Handlebar Risers, Motorcycle Parts
More

Rivco Handlebar Risers

$179.99
J&P Cycles Rivco Handlebar Risers
Free Shipping
/rivco-handlebar-risers/1iiZT4pj8YF6mkMKHEyGIQ==/info
J&P Cycles
IN_STOCK ( In stock )
Free Shipping
This set replaces the stock riser and will bring the handlebars up 1 and back toward the rider 2 While it may not seem like a lot, the 2 gives you a much more upright seating position rather than reaching over the gas tank This will significantly reduce back, neck, and shoulder fatigue They are machined from billet aluminum and are triple chrome plated Rivco Handlebar Risers
More

SW-MOTECH Barback Offset...

$166.95
RevZilla.com SW-MOTECH Barback Offset Handlebar Risers BMW R1200GS/Adventur e 2013-2
Free Shipping
/swmotech-barback-offset/-4jlbwAgQN_9OcE6qITcAg==/info
RevZilla.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
SW-MOTECH Barback Offset Handlebar Risers BMW R1200GS/Adventure Adjust your handlebars for more comfort during longer trips and more control during technical riding. Features: Relocates handlebar up 32mm and back 25mm Improves ergonomics Aluminum alloy construction Black anodized finish Includes pair of risers, clamps and hardwareYou might also like: Sw Motech, Hand Controls & Mirrors, Adv/Touring Parts, Handlebar Risers, Motorcycle Parts
More

J&P Cycles Straight Handlebar...

$87.99
J&P Cycles J&P Cycles Straight Handlebar Riser Set
+ $7.99 shipping
/jp-cycles-straight/nhthx-032PNonfJmliRPfw==/info
J&P Cycles
IN_STOCK ( In stock )
Aluminum constructed for light weight and chrome-plated for top quality shine, these risers are designed to fit 1 bars Requires 1/2-20 threaded mounting bolts J&P Cycles Straight Handlebar Riser Set
More

Covingtons Customs 3...

$164.99
J&P Cycles Covingtons Customs 3 Handlebar Risers
Free Shipping
/covingtons-customs-3/UaN11Kg9lYbwrLgrPrbv5w==/info
J&P Cycles
IN_STOCK ( In stock )
Free Shipping
CNC-machined from billet aluminum Bolts through from the top For use with 1 handlebars These are not threaded Covingtons Customs 3 Handlebar Risers
More

SW-MOTECH Barback Offset...

$166.95
RevZilla.com SW-MOTECH Barback Offset Handlebar Risers BMW R1200GS/Adventur e 2013-2
Free Shipping
/swmotech-barback-offset/rETxQMRAefyY5QtnIS_aXw==/info
RevZilla.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
SW-MOTECH Barback Offset Handlebar Risers BMW R1200GS/Adventure Adjust your handlebars for more comfort during longer trips and more control during technical riding. Features: Relocates handlebar up 32mm and back 25mm Improves ergonomics Aluminum alloy construction Black anodized finish Includes pair of risers, clamps and hardwareYou might also like: Sw Motech, Hand Controls & Mirrors, Adv/Touring Parts, Handlebar Risers, Motorcycle Parts
More

Rivco Dyna Series Handlebar...

$179.95
Dennis Kirk Rivco Dyna Series Handlebar Risers, Handlebar Risers-Clamps and Hardware FXD017
Free Shipping
/rivco-dyna-series/LmbrrF96R70QM67Aluu1eQ==/info
Dennis Kirk
IN_STOCK ( In stock )
Store not rated
Free Shipping
Billet aluminum handlebar risers featuring a triple chrome-plated finishFor use with 1 in. handlebars only2.5 in. tall with 2 in. of pullback and tapped for 1/2 in.-13 riser boltsDesigned to replace stock 1.5 in. straight risers found on many Dyna 91-up m
More

Rox Speed FX 3 Black Pivoting...

$151.99
J&P Cycles Rox Speed FX 3 Black Pivoting Handlebar Risers
Free Shipping
/rox-speed-fx-3-black/5vKEDzfw4yFrJvxNsmBcNQ==/info
J&P Cycles
IN_STOCK ( In stock )
Free Shipping
Rox Speed FX unique patented riser design allows you to pivot the riser in the original clamps and pivot the bar orientation in the top clamps of the riser Provides an incredible amount of bar positions for you to find the right height and pull-back for your riding position and stature Incredibly universal with their 2-piece design, clamped into virtually any 1 diameter clamps and then re-clamping the bar directly above that, on its original clamping area Machined from 6061-T6 billet aluminum, made for 1 diameter handlebars Re-routing of stock lines and cables or longer lines and cables may be necessary on certain bikes 3 center to center height Rox Speed FX 3 Black Pivoting Handlebar Risers
More

Rox 3 ½ Pivoting Snowmobile...

$89.99
eBay Rox 3 ½ Pivoting Snowmobile Handlebar Risers For 7/8 Or 1-1/8 Handlebars
Free Shipping
/rox-3-pivoting/CDfP0fp1eZyzxlxJQ-vw0A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
New Rox 3 Pivoting Snowmobile Handlebar Risers For 7/8 Or 1-1/8 Handlebars Other Available Images : Image 1 Thank You For Choosing onandoffroadparts Made in the USA 3 1/2 (89mm) Center-to-Center Rise Pivots Backward/Forward based on Rider Preference 7/8 Stem (22mm)Accepts 7/8 (22mm) OR 1 1/8 (28mm) Handl
More

Rox Speed FX 2 Black Pivoting...

$141.99
J&P Cycles Rox Speed FX 2 Black Pivoting Handlebar Risers
+ $12.99 shipping
/rox-speed-fx-2-black/g9F5LQrj0qKaNWeTjyiZqw==/info
J&P Cycles
IN_STOCK ( In stock )
Rox unique patented riser design allows you to pivot the riser in the original clamps and pivot the bar orientation in the top clamps of the riser Provides an incredible amount of bar positions for you to find the right height and pull-back for your riding position and stature Incredibly universal with their 2-piece design, clamped into virtually any 1 diameter clamps and then reclamping the bar directly above that, on its original clamping area Machined from 6061-T6 billet aluminum, made for 1 diameter handlebars Universal 2-piece design attaches to nearly any bar or clamping area with a 1 diameter Re-routing of stock lines and cables or longer lines and cables may be necessary on certain bikes 2 center to center height Rox Speed FX 2 Black Pivoting Handlebar Risers
More

SW-MOTECH Handlebar Risers...

$176.95
RevZilla.com SW-MOTECH Handlebar Risers BMW R1200RT 2005-2013
Free Shipping
/swmotech-handlebar/O1m3wOYTCffzruC0QFfpFg==/info
RevZilla.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
SW-MOTECH Handlebar Risers BMW R1200RT Provides a more upright, comfortable riding position by raising the original handlebar by approximately 25mm (1 inch). No need to replace your handlebars - simply remove the bars from the top clamp, place the riser between the handlebar and original top clamp, and reinstall the bars using included hardware. No change of control cables, wiring, or hoses is required however, the installer should always checking for adequate cable/wiring/hose slack during installation.You might also like: Sw Motech, Hand Controls & Mirrors, Adv/Touring Parts, Handlebar Risers, Motorcycle Parts
More

Rox Speed FX 3 Chrome...

$219.99
J&P Cycles Rox Speed FX 3 Chrome Pivoting Handlebar Risers
Free Shipping
/rox-speed-fx-3-chrome/lK8pxdopo7OpSHYPTKHPgQ==/info
J&P Cycles
IN_STOCK ( In stock )
Free Shipping
Rox Speed FX unique patented riser design allows you to pivot the riser in the original clamps and pivot the bar orientation in the top clamps of the riser Provides an incredible amount of bar positions for you to find the right height and pull-back for your riding position and stature Incredibly universal with their 2-piece design, clamped into virtually any 1 diameter clamps and then re-clamping the bar directly above that, on its original clamping area Machined from 6061-T6 billet aluminum, made for 1 diameter handlebars Re-routing of stock lines and cables or longer lines and cables may be necessary on certain bikes 3 center to center height Rox Speed FX 3 Chrome Pivoting Handlebar Risers
More

SW-MOTECH Handlebar Riser BMW...

$135.95
RevZilla.com SW-MOTECH Handlebar Riser BMW R1200GS/Adventur e 2013-2015
Free Shipping
/swmotech-handlebar-riser/E1eUDcf0Xi2HrZm7ZekjOQ==/info
RevZilla.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
SW-MOTECH Handlebar Riser BMW R1200GS/Adventure SW-MOTECH has raised the bar (literally) with these 40mm handlebar risers for the BMW R1200GS, increasing comfort by providing a more upright riding position. Available in either powder-coated black or bead blasted aluminum for strength and durability. No need to replace your handlebars. Simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the top clamp using the included hardware. For use with original top clamp or included matching SW-MOTECH top clamp. Kit includes: Bar riser Mounting material Mounting instructionsYou might also like: Sw Motech, Hand Controls & Mirrors, Adv/Touring Parts, Handlebar Risers, Motorcycle Parts
More

Rox Speed FX 4 Chrome...

$235.99
J&P Cycles Rox Speed FX 4 Chrome Pivoting Handlebar Risers
Free Shipping
/rox-speed-fx-4-chrome/RoRJijyaK4w7ELxsJMRUXw==/info
J&P Cycles
IN_STOCK ( In stock )
Free Shipping
Rox Speed FX unique patented riser design allows you to pivot the riser in the original clamps and pivot the bar orientation in the top clamps of the riser Provides an incredible amount of bar positions for you to find the right height and pull-back for your riding position and stature Incredibly universal with their 2-piece design, clamped into virtually any 1 diameter clamps and then re-clamping the bar directly above that, on its original clamping area Machined from 6061-T6 billet aluminum, made for 1 diameter handlebars Re-routing of stock lines and cables or longer lines and cables may be necessary on certain bikes 4 center to center height Rox Speed FX 4 Chrome Pivoting Handlebar Risers
More

SW-MOTECH Handlebar Riser BMW...

$135.95
RevZilla.com SW-MOTECH Handlebar Riser BMW R1200GS/Adventur e 2013-2015
Free Shipping
/swmotech-handlebar-riser/NqxAO7gWziZ3mhu6EtGarw==/info
RevZilla.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
SW-MOTECH Handlebar Riser BMW R1200GS/Adventure SW-MOTECH has raised the bar (literally) with these 40mm handlebar risers for the BMW R1200GS, increasing comfort by providing a more upright riding position. Available in either powder-coated black or bead blasted aluminum for strength and durability. No need to replace your handlebars. Simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the top clamp using the included hardware. For use with original top clamp or included matching SW-MOTECH top clamp. Kit includes: Bar riser Mounting material Mounting instructionsYou might also like: Sw Motech, Hand Controls & Mirrors, Adv/Touring Parts, Handlebar Risers, Motorcycle Parts
More

SW-MOTECH 7/8 Barback Offset...

$103.95
RevZilla.com SW-MOTECH 7/8 Barback Offset Handlebar Risers
Free Shipping
/swmotech-78-barback/YNVb8mTeKyj-YXpxeHw5hg==/info
RevZilla.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
SW-MOTECH 7/8 Barback Offset Handlebar Risers Provides a more upright, comfortable riding position by raising and retracting the original 7/8 (22mm) diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 31mm and move them back 22mm, producing an overall handlebar displacement of 35.4mm (1.4) at a 45 degree angle from the original position. Kit includes: Barbacks (1 pair) Top clamps (1 pair) Four M8x30 screws Four M8x25 screws Note: Please read below fitment notes prior to orderingYou might also like: Sw Motech, Hand Controls & Mirrors, Adv/Touring Parts, Handlebar Risers,... Less
More

SW-MOTECH 7/8 Barback Offset...

$103.95
RevZilla.com SW-MOTECH 7/8 Barback Offset Handlebar Risers
Free Shipping
/swmotech-78-barback/x2ZitMK_EQuiK0XUORnLaw==/info
RevZilla.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
SW-MOTECH 7/8 Barback Offset Handlebar Risers Provides a more upright, comfortable riding position by raising and retracting the original 7/8 (22mm) diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 31mm and move them back 22mm, producing an overall handlebar displacement of 35.4mm (1.4) at a 45 degree angle from the original position. Kit includes: Barbacks (1 pair) Top clamps (1 pair) Four M8x30 screws Four M8x25 screws Note: Please read below fitment notes prior to orderingYou might also like: Sw Motech, Hand Controls & Mirrors, Adv/Touring Parts, Handlebar Risers,... Less
More

LA Choppers Black 3 Riser Kit...

$159.99
J&P Cycles LA Choppers Black 3 Riser Kit for 1-1/4 Handlebar
Free Shipping
/la-choppers-black-3-riser/sISZwVbln9oPyriazDcSHg==/info
J&P Cycles
IN_STOCK ( In stock )
Free Shipping
Fit handlebars with 1-1/4 clamping area Also available in show chrome finish Sold as a kit of two risers and top clamp Risers have 1/2-13 threads Made in U.S.A LA Choppers Black 3 Riser Kit for 1-1/4 Handlebar
More

Rox 2 Inch T-style Stem...

$65.95
eBay Rox 2 Inch T-style Stem Pivoting Snowmobile Handlebars Risers For 7/8 Bars
Free Shipping
/rox-2-inch-tstyle-stem/3s_7J0SXVpeei1b6G9hvVg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
lp- Helmets Street Apparel Offroad Apparel ATV Parts Harley Parts Dirt Bike Parts Rox 2 inch T-Style Stem Pivoting Snowmobile Handlebars Risers for 7/8 bars Install easily on any snowmobile with a T-style steering stem, or use with an adapter tube Made in the U.S.A. Out-board positioning also makes them incredibly durable Risers are held by the original clamps and re-clamp the handlebars with pivoting fore and aft adjustment Available in natural aluminum finish Patented design Pivoting Risers a
More

LA Choppers Black 1-1/2 Riser...

$134.99
J&P Cycles LA Choppers Black 1-1/2 Riser Kit for 1 Handlebar
+ $12.99 shipping
/la-choppers-black-112/-EbntFlJTq54G3CIkb5DYg==/info
J&P Cycles
IN_STOCK ( In stock )
Complete kit includes risers, caps and cap mounting hardware Fit handlebars with 1 clamping area CNC-machined from billet aluminum Also available in bright chrome finish Risers are drilled and tapped for 1/2-13 mounting bolts (sold separately) Sold in pairs Made in U.S.A LA Choppers Black 1-1/2 Riser Kit for 1 Handlebar
More

SW-MOTECH 28mm Barback Offset...

$103.95
RevZilla.com SW-MOTECH 28mm Barback Offset Handlebar Risers
Free Shipping
/swmotech-28mm-barback/TkXFevdaWKTqcgboFughaw==/info
RevZilla.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
SW-MOTECH 28mm Barback Offset Handlebar Risers Provides a more upright, comfortable riding position by raising and retracting the original 28mm diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 30mm (1.25) and move them back 22mm (1.0), producing an overall handlebar displacement of 35.4mm (1.4) at a 45 degree angle from the original position. When installed, there may be a slight gap between the bar riser and the top clamp. This gap allows the top clamps to be torque-tightened onto the bar riser to prevent the bar from spinning. Kit Includes: Barbacks (1 pair) Top clamps... Less
More

SW-MOTECH 28mm Barback Offset...

$103.95
RevZilla.com SW-MOTECH 28mm Barback Offset Handlebar Risers
Free Shipping
/swmotech-28mm-barback/coVrgh-qDbqNalm1w_iMHA==/info
RevZilla.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
SW-MOTECH 28mm Barback Offset Handlebar Risers Provides a more upright, comfortable riding position by raising and retracting the original 28mm diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 30mm (1.25) and move them back 22mm (1.0), producing an overall handlebar displacement of 35.4mm (1.4) at a 45 degree angle from the original position. When installed, there may be a slight gap between the bar riser and the top clamp. This gap allows the top clamps to be torque-tightened onto the bar riser to prevent the bar from spinning. Kit Includes: Barbacks (1 pair) Top clamps... Less
More

SW-MOTECH Handlebar Risers...

$135.95
RevZilla.com SW-MOTECH Handlebar Risers BMW R1200GS/Adventur e / F800GS Adventure
Free Shipping
/swmotech-handlebar/82czHeIHqHZCiT04gvZG9w==/info
RevZilla.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
SW-MOTECH Handlebar Risers BMW R1200GS/A / F800GS Adventure Provides a more upright, comfortable riding position by raising the original 1-1/8 (28mm) diameter tubular handlebar by 30mm (1.2). No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. Also perfect for use with oversize handlebars (ProTaper, Magura, etc.). For use with original top clamp or optional matching SW-MOTECH top clamp (sold separately). No change of control cables, wiring, or hoses is required for most motorcycles however, the installer should always checking for adequate cable/wiring/hose slack during installation.You might also like: Sw Motech, Hand Controls & Mirrors, Adv/Touring... Less
More

LA Choppers 1 Handlebar Road...

$109.99
J&P Cycles LA Choppers 1 Handlebar Road King Risers
+ $12.99 shipping
/la-choppers-1-handlebar/YtPqLLj7ujlAc8B0BIpGmA==/info
J&P Cycles
IN_STOCK ( In stock )
Fits under the stock nacelle cover to accomodate all LA Choppers Hefty Handlebars Includes all hardware Raw finish LA Choppers 1 Handlebar Road King Risers
More

Biltwell Inc. Slimline Shorty...

$94.99
J&P Cycles Biltwell Inc. Slimline Shorty Black 1 Risers for 1 Handlebars
+ $7.99 shipping
/biltwell-inc-slimline/5NvEj9Rgm8YSSiuQ3j58aA==/info
J&P Cycles
IN_STOCK ( In stock )
Cast and polished 1 tall stainless steel risers for 1 handlebars Stainless steel hardware Biltwell Inc. Slimline Shorty Black 1 Risers for 1 Handlebars
More

LA Choppers Chrome 1-1/2...

$134.99
J&P Cycles LA Choppers Chrome 1-1/2 Riser Kit for 1-1/4 Handlebar
+ $12.99 shipping
/la-choppers-chrome-112/pG8KZK8uGWZc5KD-ca7aVg==/info
J&P Cycles
IN_STOCK ( In stock )
Fit handlebars with 1-1/4 clamping area Also available in gloss black finish Sold as a kit of two risers and top clamp Risers have 1/2-13 threads Made in U.S.A LA Choppers Chrome 1-1/2 Riser Kit for 1-1/4 Handlebar
More

Rox 1 Inch T-style Stem...

$57.95
eBay Rox 1 Inch T-style Stem Pivoting Snowmobile Handlebars Risers For 7/8 Bars
Free Shipping
/rox-1-inch-tstyle-stem/uAE9hCkt28fF6Wk7uOMWzA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
lp- Helmets Street Apparel Offroad Apparel ATV Parts Harley Parts Dirt Bike Parts Rox 1 inch T-Style Stem Pivoting Snowmobile Handlebars Risers for 7/8 bars Install easily on any snowmobile with a T-style steering stem, or use with an adapter tube Made in the U.S.A. Out-board positioning also makes them incredibly durable Risers are held by the original clamps and re-clamp the handlebars with pivoting fore and aft adjustment Available in natural aluminum finish Patented design Pivoting Risers a
More

ROX Speed FX 2 in. Pivoting...

$74.99
Dennis Kirk ROX Speed FX 2 in. Pivoting Risers for 7/8 in. Handlebars, Handlebar Risers-Clamps and Hardware 1R-P2SSN
+ $7.99 shipping
/rox-speed-fx-2-in/exqy5WQ1iwCvX4IT8jj4tQ==/info
Dennis Kirk
IN_STOCK ( In stock )
Store not rated
Patented two-piece design that allows these risers to be installed on any motor vehicle with 7/8 in. handlebar clampsOriginal clamps hold the risers which re-clamp the handlebars 2 in. higher with pivoting fore and aft adjustmentOut- board positioning make
More

Rox Speed Fx Elite Height...

$168.95
eBay Rox Speed Fx Elite Height Adjustable Snowmobile Handlebar Risers 4 To 6 7/8
Free Shipping
/rox-speed-fx-elite-height/Ox0__NyE87a5FgQ5TqlLQA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Thanks for checking out our Store! Brand New Rox Speed Elite Series Height- Adjustable Snowmobile Handlebar Risers Allow you to adjust your handlebar height easily on the trail, or in the back country, to increase your comfort by customizing your sled and its feel to you Allow you to clamp a stock 7/8 diameter handlebar, or you can remove the 7/8 reducers and then clamp a 1 1/8 oversize aluminum bar - reducers lock into risers to ensure no slippage between components and serrated teeth ensure
More

Rox Speed Fx 6 - 8.25 Inch...

$189.95
eBay Rox Speed Fx 6 - 8.25 Inch Elite Height- adjustable Snowmobile Handlebar Risers
Free Shipping
/rox-speed-fx-6-825/NGWGtIvOo5wI-n8q6UiKwA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
ROX Speed FX 6-8.25 in. Elite Height- Adjustable Snowmobile Handlebar Risers Increase your comfort by customizing your sled and its feel by allowing you to adjust your handlebar height easily on the trail, or in the back country Available with a 6-8.25 in. rise to take the guesswork out of deciding which size to buy; clamp in your choice of 7/8 in. diameter handlebars or remove the 7/8 in. reducers and then clamp in a 1 1/8 in. aluminum handlebar Independent left and right risers adapt to any T-
More

Bp 1.25” Snowmobile...

$27.95
eBay Bp 1.25” Snowmobile Handlebars Kit Atv Handle Bar Risers 7-8” Diameter
Free Shipping
/bp-125%C3%A2-snowmobile/-l7Smh3Qy45Hqks68qJQ7w==/info
eBay
IN_STOCK ( In stock )
Free Shipping
1.25 ATV/Snowmobile Handlebar Riser Kit Fitment All ATVs/Snowmobiles with 7/8 Handlebars Description Increase your ride comfort by raising your handlebars today! Raising your handlebars will allow you to sit in a more upright and comfortable riding position. Offers more control over your bike with considerably less steering input. Made to look like a seamless extension of your factory bars unlike other kits that leave a gap underneath the stock bar clamp. Each kit is designed and produced wit
More

1inch Chrome Handlebar Risers...

$28.76
Banggood 1inch Chrome Handlebar Risers For Harley Honda
Free Shipping
/1inch-chrome-handlebar/GLxtrgXSieea32r3fhaT5g==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
100% brand new and high quality Hole Diameter: 1'' Width: 1.25'' Total Height: 5'' Height from bottom to center of hole: 3.5'' Color: Chrome Quantity:1 Pair (2 PCS) Fit for 1 inchhandlebars only All Harley Davidson , Cruisers , Choppers , Metrics with 1'' bar diameter All Victory cruisers with 1'' bar diameter Yamaha V-Star 650 Classic Yamaha V-Star 650 Custom Yamaha V-Star 650 Silverado Yamaha V-Star 1100 Classic Yamaha V-Star 1100 Custom Yamaha V-Star 1100 Silverado Yamaha Road Star 1600/1700 Yamaha Road Star 1600/1700 Silverado Honda Shadow Spirit 750 C2 Honda Shadow 750 Aero Honda VTX 1300 C Honda VTX 1300 Tourer Honda VTX 1300 Retro Honda VTX 1800N Honda VTX 1800 Tourer Honda VTX 1800 Retro Honda Valkyrie Standard Honda Valkyrie Tourer Suzuki Intruder Volusia Suzuki Marauder 1600... Less
More

Rox Speed Snowmobile Height...

$178.16
eBay Rox Speed Snowmobile Height Adjustable Handlebar Risers 6 To 8.25 7/8 Bar
Free Shipping
/rox-speed-snowmobile/amvfR6LLlDJiEsSQjLqgCg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Thanks for checking out our Store! Brand New Rox Speed Elite Series Height- Adjustable Snowmobile Handlebar Risers Allow you to adjust your handlebar height easily on the trail, or in the back country, to increase your comfort by customizing your sled and its feel to you Allow you to clamp a stock 7/8 diameter handlebar, or you can remove the 7/8 reducers and then clamp a 1 1/8 oversize aluminum bar - reducers lock into risers to ensure no slippage between components and serrated teeth ensure
More

Rox Speed Fx 4-6 Inch Elite...

$152.95
eBay Rox Speed Fx 4-6 Inch Elite Height- adjustable Snowmobile Handlebar Risers
Free Shipping
/rox-speed-fx-46-inch/Si-TmIEC_CgJVL9nIMt5Sw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
ROX Speed FX 4-6 in. Elite Height- Adjustable Snowmobile Handlebar Risers Increase your comfort by customizing your sled and its feel by allowing you to adjust your handlebar height easily on the trail, or in the back country Available with a 4 in. to 6 in. rise to take the guesswork out of deciding which size to buy; clamp in your choice of 7/8 in. diameter handlebars or remove the 7/8 in. reducers and then clamp in a 1 1/8 in. aluminum handlebar Independent left and right risers adapt to any T
More

Alloy Art Heavy-Duty...

$29.99
J&P Cycles Alloy Art Heavy-Duty Handlebar Riser Bushings
+ $7.99 shipping
/alloy-art-heavyduty/QRLKxVBN-hSBNFykbOsHlQ==/info
J&P Cycles
IN_STOCK ( In stock )
Made from new space age polyurethane material Eliminates sloppiness in handlebar and isolates vibration Alloy Art Heavy-Duty Handlebar Riser Bushings
More

Bp 1.25 Handle Bar Risers 7/8...

$27.95
eBay Bp 1.25 Handle Bar Risers 7/8 Diameter Atv Snowmobile Handlebars Kit
Free Shipping
/bp-125-handle-bar-risers/DQZtJ47p2xUEdoWblQHy-Q==/info
eBay
IN_STOCK ( In stock )
Free Shipping
1.25 ATV/Snowmobile Handlebar Riser Kit Fitment All ATVs/Snowmobiles with 7/8 Handlebars Description Increase your ride comfort by raising your handlebars today! Raising your handlebars will allow you to sit in a more upright and comfortable riding position. Offers more control over your bike with considerably less steering input. Made to look like a seamless extension of your factory bars unlike other kits that leave a gap underneath the stock bar clamp. Each kit is designed and produced wit
More

Snowmobile Mx Atv Handlebar...

$21.99
eBay Snowmobile Mx Atv Handlebar Riser Clamp Clamps Kit 7/8
Free Shipping
/snowmobile-mx-atv/eeUB0gPHviPrBK9zUpkaGA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
SNOWMOBILE ATV MX 7/8HANDLEBAR RISER CLAMPS SET OF 4 CLAMPS WITH NUTS PM15470 THIS IS A PHOTO OF THE KIT YOU WILL RECEIVE KIT INCLUDES FOUR 7/8 HANDLEBAR CLAMPS CLAMPS CAN BE USED FOR TOP OR BOTTOM CLAMPS UNIVERSAL APPLICATION-- WORKS WITH MOST MODELS WORKS ON MOTORCYCLES, ATVS, AND SNOWMOBILES PERFECT FOR ADDING RISER BLOCKS TO YOUR SNOWMOBILE OR ATV STURDY ALUMINUM CONSTRUCTION PERFORMANCE OFFROAD 6686 MAIN STREET BONNERS FERRY , ID 83805 208-267-ATVS BE SURE TO CHECK OUT OUR EBAY STORE FOR
More

J&P Cycles Flush Mount...

$34.99
J&P Cycles J&P Cycles Flush Mount Handlebar Riser Bushing Kit
+ $7.99 shipping
/jp-cycles-flush-mount/AnQ4ct7omm9HSiVnjcUF2A==/info
J&P Cycles
IN_STOCK ( In stock )
Kit includes bushings, spacers, and bolts to install your handlebars, featuring countersunk lower washers for a true custom look 1/2-13 coarse thread J&P Cycles Flush Mount Handlebar Riser Bushing Kit
More

Arctic Cat Snowmobile...

$48.95
eBay Arctic Cat Snowmobile Handlebar Pivot T Style 6 Riser 45530 Pm15530
Free Shipping
/arctic-cat-snowmobile/1akzBCrzh8TSHXEAAcVSaQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
POWERMADD ARCTIC CAT 6PIVOT STYLE HANDLEBAR RISER FOR 7/8 BARS THIS IS AN ACTUAL PHOTO OF THE RISER YOU WILL RECEIVE THIS LISTING IS FOR ONE 6 RISER BLOCK ALWAYS CHECK AND CONFIRM THAT YOUR VEHICLE HAS ENOUGH CABLE AND BRAKE LINE LENGTH BEFORE INSTALLING ANY HANDLEBAR RISERS. CUSTOMIZE YOUR HANDLEBAR HEIGHT BY REPLACING YOUR OEM RISER TO RAISE OR LOWER YOUR HANDLEBAR FOR OPTIMUM FIT MACHINED 6061 T-6 ALUMINUM CONSTRUCTION WORKS WITH PIVOT ADAPTOR KIT FOR ULTIMATE HANDLEBAR POSITIONING REPLAC
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.eap-30212
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.eap-30212