slug iron

Bright Eye Heart I Love Slugs Iron on Heat Transfer is a great way to jazz up a plain T-shirt, pillow case or any other light color fabric. The transfer is transparent and should be applied only to white or light colored material suitable to withstand high heat. Available in 6, 8 and 10. Color not true until transferred; home iron instructions included. Wash inside out using mild detergent and dry on low heat.

Bright Eye Heart I Love Slugs Iron on Heat Transfer is a great way to jazz up a plain T-shirt, pillow case or any other light color fabric. The transfer is transparent and should be applied only to white or light colored material suitable to withstand high heat. Available in 6, 8 and 10. Color not true until transferred; home iron instructions included. Wash inside out using mild detergent and dry on low heat.

Monterey Sluggo 5 lbs pounds organic slug snail control iron phosphate Snail and slug control at its best. An alternative to traditional slug and snail baits, Sluggo® contains iron phosphate and can be used around pets and wildlife. This product is labeled for use in vegetable gardens up until harvest and remains effective after rain or sprinkling. A pellet that breaks down into fertilizer! New lower rate, 1 lb. covers up to 2,000 sq. ft. EPA Reg. No.: 67702-3-54705 Terms/Conditions Paypal is

Monterey Sluggo 2.5 lbs pounds organic slug snail control iron phosphate Snail and slug control at its best. An alternative to traditional slug and snail baits, Sluggo® contains iron phosphate and can be used around pets and wildlife. This product is labeled for use in vegetable gardens up until harvest and remains effective after rain or sprinkling. A pellet that breaks down into fertilizer! New lower rate, 1 lb. covers up to 2,000 sq. ft. EPA Reg. No.: 67702-3-54705 Terms/Conditions Paypal i

Escar-Go! protects lettuce, tomatoes, chard, cabbage, squash, corn and other vegetables from slug and snail damage. For use around fruit trees, citrus, berries, ornamentals, shrubs, flowers, trees, lawns, gardens and in greenhouses. Escar-Go! is a unique blend of an iron phosphate active ingredient, originating from soil, with slug and snail bait additives. It is used as an ingredient in fertilizers. The Escar-Go! that is not ingested by snails and slugs will degrade and become a part of the soil.c Escar-Go! is ingested by slugs and snails when they travel from their hiding places to plants. Ingestion, even in small amounts, will cause them to cease feeding. This physiological effect of the bait gives immediate protection to the plants even though the slugs and snails may... Less

This intricate wrought iron sink stand brings nature indoors with its artistically woven base and vine detailing with large, green leaves. A vessel sink in your choice of color is the perfect complement to this stand. Overall dimensions: 17-1/4 L x 17-1/4 W x 33-1/2 H (± 1/2 ). Stand is Burnished Bronze, a dark wrought iron finish with gold tones, and has green accents. Wrought Iron is specially treated to resist rusting. Can be used with the sinks listed below. Holds 16 -18 diameter round vessel sinks. Sink sold separately.

INCLUDES: (1) Carbide Tipped Hole Cutter FEATURES: Cuts material up to 1 thick Ultra-hard tungsten carbide teeth Excellent wear and heat resistance Triple edge cutting system One piece construction Strong, heat resistant spring ejects the slug fast Safety collar stop SPECIFICATIONS: Size: 2 Recommended for cutting steel plate, iron, aluminum, copper, cast iron, stainless steel, FRP, and plastics up to 1 thick Champion's CT7 carbide tipped hole cutters are the perfect portable tool for cutting holes up to 1 in a variety of steels including stainless, cast iron, aluminum, and nonferrous materials. Designed for today's professional steel fabricators, welders, plumbers and mechanics. Features triple-edge teeth and ejector spring for fast hole cutting and slug ejection. The CT7 is an excellent... Less

texasvalue107 Store BONIDE SLUG MAGIC PELLETS *1 pound *Covers 1000 square feet *Patented all weather formula makes slugs disappear *Iron phosphate pellets are safe around kids and pets *Use in fruit and vegetable gardens up to day of harvest *Biodegradable *Contains iron phosphate *Restricted in DC Payment Restriction: We accept only Paypal payments. Payment is required at time of purchase to complete the transaction. KY residents pay 6% sales tax. Delivery Time: Please allow 5 BUSINESS days

Use this effective yet gentle weed suppressor without worrying about killing your lawn or poisoning wildlife. IRON X! controls dandelions, white clover, chickweed, speedwell, algae, lichens and many more. Weeds begin to turn brown and die within hours of application, but people and pets may enter the treated area as soon as the spray dries. Safe to use on new lawns. Effective even in cold weather. Lawns may be re-sown within one day of treatment. 16 oz. concentrate makes 3.125 gallons. One gallon per 200 sq. ft. of lawn with hand sprayer.Product Label

Cute Pink Slug Monster Cartoon Iron on Heat Transfer is a great way to jazz up a plain T-shirt, pillow case or any other light color fabric. The transfer is transparent and should be applied only to white or light colored material suitable to withstand high heat. Available in 6, 8 and 10. Color not true until transferred; home iron instructions included. Wash inside out using mild detergent and dry on low heat.

The Jancy Slugger uncoated, cobalt steel annular cutter with 2” depth and a 3/4” annular cutter shank is used to create through holes as deep as 2” in a range of materials, with best performance in mild steel and structural steel. An annular cutter removes only the circumference of a through hole (extending through the workpiece), releasing the central material as a slug when the hole has been cut. The center-free design of the tool results in energy efficiency and reduced cycle time: the operator can produce holes three to five times faster than with a conventional twist drill that must convert the entire hole into chips. In addition, this tool’s multiple cutting edges can create an accurate, burr-free hole that minimizes the need for secondary operations such as pre-drilling and... Less

The Jancy Slugger cobalt steel annular cutter with titanium nitride (TiN) coating, 2” depth, and a 3/4” annular cutter shank is used to create through holes as deep as 2” in a range of materials, with best performance in hard-to-machine materials as well as mild steel and stainless steel. An annular cutter removes only the circumference of a through hole (extending through the workpiece), releasing the central material as a slug when the hole has been cut. The center-free design of the tool results in energy efficiency and reduced cycle time: the operator can produce holes three to five times faster than with a conventional twist drill that must convert the entire hole into chips. In addition, this tool’s multiple cutting edges can create an accurate, burr-free hole that minimizes the... Less

mr.obedientrebel Store (3Pack) SLUGGO Kills Slugs Snails! OMRI Iron Phosphate 1lb! 3 lbs total

15% Off Site Wide. Iron Duck Base Board is 100% x-ray translucency, MRI and CT scan compatible. Rotomolded one piece seamless HDPE shell over non-toxic Eco-Friendly foam 500 lbs weight capacity 250 lbs float capacity 72 x 16 x 1.75 Weight 16lbs $25 shipping charge applies. Expedited shipping not available for this item.

Iron Age Mens Black 6 Inch Steel Toe EH Boot Style: IA0101 Iron Age Series Features Full Grain Leather Steel Toe EH Safe Moisture Wicking Nylon Mesh Lining Removable EVA Cushion Insert with Sponge Rubber Heel Wedge Direct Attached PU Midsole and TPU Lug Bottom Mens Sizes Available: Medium (M) 6-12, 13, 14 Wide (W) 6-12, 13

The Jancy Slugger cobalt steel annular cutter with titanium nitride (TiN) coating, 1” depth, and a 3/4” annular cutter shank is used to create through holes as deep as 1” in a range of materials, with best performance in hard-to-machine materials as well as mild steel and stainless steel. An annular cutter removes only the circumference of a through hole (extending through the workpiece), releasing the central material as a slug when the hole has been cut. The center-free design of the tool results in energy efficiency and reduced cycle time: the operator can produce holes three to five times faster than with a conventional twist drill that must convert the entire hole into chips. In addition, this tool’s multiple cutting edges can create an accurate, burr-free hole that minimizes the... Less

The Jancy Slugger cobalt steel annular cutter with titanium nitride (TiN) coating, 2” depth, and a 3/4” annular cutter shank is used to create through holes as deep as 2” in a range of materials, with best performance in hard-to-machine materials as well as mild steel and stainless steel. An annular cutter removes only the circumference of a through hole (extending through the workpiece), releasing the central material as a slug when the hole has been cut. The center-free design of the tool results in energy efficiency and reduced cycle time: the operator can produce holes three to five times faster than with a conventional twist drill that must convert the entire hole into chips. In addition, this tool’s multiple cutting edges can create an accurate, burr-free hole that minimizes the... Less

The Jancy Slugger cobalt steel annular cutter with titanium nitride (TiN) coating, 1” depth, and a 3/4” annular cutter shank is used to create through holes as deep as 1” in a range of materials, with best performance in hard-to-machine materials as well as mild steel and stainless steel. An annular cutter removes only the circumference of a through hole (extending through the workpiece), releasing the central material as a slug when the hole has been cut. The center-free design of the tool results in energy efficiency and reduced cycle time: the operator can produce holes three to five times faster than with a conventional twist drill that must convert the entire hole into chips. In addition, this tool’s multiple cutting edges can create an accurate, burr-free hole that minimizes the... Less

This versatile 5-tier baker's rack is the perfect way to add storage to any area. Featuring an elegant hammered finish, this baker's rack combines durability with style. Color options: Bronze, verdi gris (green), pewter Materials: Iron Finish: Powder coated Bottom shelf measures 29.25 inches wide x 14.50 inches deep Upper shelf measures 29.25 inches wide x 11.25 inches deep Dimensions: 67 inches high x 31 inches wide x 16 inches deep Assembly required

This elegant chandelier will dress up any dining room. Features two tiers with a painted frame and creme smoke bell-shaped glass. There are also crystal droplets. Antique bronze finish. Creme smoke glass. Crystal droplets. Takes twelve 60 watt bulbs (not included). 34 wide. 38 high. 5 wide canopy. Includes 13 1/2 feet of wire and 6 feet of chain. Hang weight of 53 3/4 lbs.

This elegant 61 Cast Iron Slipper Tub features an extended, gently sloped backrest and sits on impressive imperial feet. Feet include built-in adjusters that allow for use on uneven floors. Chrome, Polished Brass, Brushed Nickel and Oil Rubbed Bronze feet are plated over solid brass. White feet are powder coat over cast iron. White porcelain enamel interior (shown with Custom Painting option). Hand smoothed painted white exterior. Size: 61 L x 30 W x 21-1/2 - 29-1/4 H (± 1/2 ). Tub Weight Uncrated: 285 lbs. Tub Weight Crated: 465 lbs. Available with faucet holes on tub rim. **Note: This tub must be used with the Shallow Floor Flange for waste and overflow. See related products below. Tubs are delivered by truck, to your residence, to your curb. Includes crate charge,... Less

The Jancy Slugger uncoated, cobalt steel annular cutter with 2” depth and a 3/4” annular cutter shank is used to create through holes as deep as 2” in a range of materials, with best performance in mild steel and structural steel. An annular cutter removes only the circumference of a through hole (extending through the workpiece), releasing the central material as a slug when the hole has been cut. The center-free design of the tool results in energy efficiency and reduced cycle time: the operator can produce holes three to five times faster than with a conventional twist drill that must convert the entire hole into chips. In addition, this tool’s multiple cutting edges can create an accurate, burr-free hole that minimizes the need for secondary operations such as pre-drilling and... Less

The Jancy Slugger uncoated, cobalt steel annular cutter with 2” depth and a 3/4” annular cutter shank is used to create through holes as deep as 2” in a range of materials, with best performance in mild steel and structural steel. An annular cutter removes only the circumference of a through hole (extending through the workpiece), releasing the central material as a slug when the hole has been cut. The center-free design of the tool results in energy efficiency and reduced cycle time: the operator can produce holes three to five times faster than with a conventional twist drill that must convert the entire hole into chips. In addition, this tool’s multiple cutting edges can create an accurate, burr-free hole that minimizes the need for secondary operations such as pre-drilling and... Less

The Jancy Slugger cobalt steel annular cutter with titanium nitride (TiN) coating, 2” depth, and a 3/4” annular cutter shank is used to create through holes as deep as 2” in a range of materials, with best performance in hard-to-machine materials as well as mild steel and stainless steel. An annular cutter removes only the circumference of a through hole (extending through the workpiece), releasing the central material as a slug when the hole has been cut. The center-free design of the tool results in energy efficiency and reduced cycle time: the operator can produce holes three to five times faster than with a conventional twist drill that must convert the entire hole into chips. In addition, this tool’s multiple cutting edges can create an accurate, burr-free hole that minimizes the... Less