Category

Tools and Accessories
Showing results for "shopsmith power coupler"
Results 1 - 40 of 1500+

Shopsmith Mark V Bandsaw 2...

$36.95
eBay Shopsmith Mark V Bandsaw 2 Urethane Tires
Free Shipping
/shopsmith-mark-v-bandsaw/BHr6E3PQi0kmyH_RLLGjbw==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Free Shipping
Brand new set of 2 Ultra Duty .125 thick urethane bandsaw tires for all years Shopsmith bandsaws. Made in the USA. Consistant .125 thick across the entire width of the tire for precise blade tracking. Update your bandsaw with a set of 2 new urethane tires
More

Shopsmith 10e 10er Mark V...

$29.99
eBay Shopsmith 10e 10er Mark V Live Center
Free Shipping
/shopsmith-10e-10er-mark-v/YinmHBRKXGgek2QDOX5zCQ==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Free Shipping
Shopsmith 10E 10ER Live Center. This is a new center that fits in the tailstock of your Shopsmith. I got a deal on 20 of these so when their gone I'm not sure I'll be able to get more. These will fit machines other than Shopsmith as long as they use the MT2 center. Other Shopsmith 10ER parts are available. If you need something please contact me and I'll get it listed. I have new bearings for the quill, drive sleeve and speed changer. New Goodyear FHP belts are also in stock. Both the speed cha
More

Shopsmith Tool Station Only...

$250.00
eBay Shopsmith Tool Station Only Holds 3 Shopsmith Tools - Tools Not Included
No Shipping Info
/shopsmith-tool-station/k5WxU3Zbp2TL1O7ozB9EMw==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
- THIS LISTING IS FOR AN AS NEW SHOPSMITH TOOL STORAGE STATION THAT I PURCHASED NEW FROM THE FACTORY. IT IS IN AS NEW CONDITION. ONLY THE TOOL STATION WITH CASTERS AND MOUNTING PLATES INSTALLED IS BEING SOLD IN THIS LISTING.THE TOOL STORAGE STATION HAS SAT UNUSED IN MY HEATED STORAGE BUILDING FOR SEVERAL YEARS WITH THE THE THREE TOOLS SHOWN IN THE PHOTOS AND IS BASICALLY BRAND NEW.THIS GORGEOUS CONDITION TOOL STATION IS AVAILABLE FOR LOCAL PICKUP ONLY. I SPENT HOURS ASSEMBLING IT AND HAVE NO IN
More

Shopsmith 10e 10er...

$9.99
eBay Shopsmith 10e 10er Replacement Switch
+ $4.00 shipping
/shopsmith-10e-10er/Rq_8Kpmk7lO_u10TuGK5Dw==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Shopsmith 10E 10ER Replacement Switch. Here's the spec's - Double Pole, Single Throw 20 Amp 125 Volt, AC 1-1/2 Hp Rated Other Shopsmith 10ER parts are available. If you need something please contact me and I'll get it listed. I have new bearings for the quill, drive sleeve and speed changer. New Goodyear FHP belts are also in stock. Both the speed changer set and the single belt styles. These are the ultra flexible, cogged style belt that's recommended. Combined shipping is no problem. If you w
More

Shopsmith Shop Smith Mark V...

$139.00
eBay Shopsmith Shop Smith Mark V Home Workshop System Extension Table Top
No Shipping Info
/shopsmith-shop-smith-mark/9QDW44Uv5szV_Dvyy2K-kA==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
chrysoula Store FREE SHIPPING IN THE USA ITEM IS NEW OLD STOCK RIGHT OUT OF A BOX THAT WAS NEVER USED. MAY HAVE A LITTLE DUST BUT NEVER USED. PLEASE SEE PHOTOS CLOSELY, WE DON'T WANT YOU TO GET SOMETHING YOU WON'T ENJOY. COST INCLUDES FREE INSURANCE ON THIS ITEM. WE SHIP WORLDWIDE. PLEASE LET US KNOW IF YOU HAVE QUESTIONS. WE WORK DURING THE DAY SO WE MAY NOT BE ABLE TO GET BACK TO YOUR QUESTIONS UNTIL EVENING. THANK YOU.
More

Shopsmith 10e 10er Bearing Set

$59.99
eBay Shopsmith 10e 10er Bearing Set
+ $5.00 shipping
/shopsmith-10e-10er/WGund3Xtzy0eqT9iys3cxA==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Shopsmith 10E 10ER New Bearing Set. You get one set of New Departure quill bearings. These are C-1 grade and are the exact bearings that came in the quill. Shopsmith used either Fafnir or the New Departure bearings in the quills. I used to sell the Fafnir bearings but their getting harder to find. The last shipment I got didn't look good. So I decided to start selling the New Departure bearings. These are brand new and look great! You also get one set of drive sleeve bearings, graded as C-3. An
More

Shopsmith 10e 10er Speed...

$24.99
eBay Shopsmith 10e 10er Speed Changer Rebuild Kit
+ $5.00 shipping
/shopsmith-10e-10er-speed/xzehHTxOnpY-2aW-UW_wzw==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Shopsmith 10E 10ER Speed Changer Rebuild Kit. These are the parts that I most fequently replace when I rebuild a speed changer. You get 1 snap ring, 3 nylon lock nuts and 6 small washers. You also get 1 set screw that holds the speed changer to the headstock with a jam nut and washer. All parts are new. The snap ring has an anti-rust coating and all the other parts are stainless steel. This kit includes a set of New bearings. These bearings are no longer sold. I buy bearings that are close to
More

Shopsmith 5 40 Grit 10/Pk...

$17.99
Ace Hardware Shopsmith 5 40 Grit 10/Pk Film Back Hook And Loop Sandpaper Disc 12050
No Shipping Info
/shopsmith-5-40-grit-10pk/Bi9TwNyZINyZoUbLemAPYA==/info
Ace Hardware
( In stock )
5 8-hole 40 grit Lasts longer and cuts faster than other sanding discs Will not show edge wear thus protecting your sanding pad Film will not break down enabling discs to last longer Backing also provides a flatter sanding surface with traditional paper Premium resin resists clogging while allowing grain to cut faster Pack/10
More

Shopsmith 10e 10er Fhp Speed...

$19.95
eBay Shopsmith 10e 10er Fhp Speed Changer Drive Belt Set new
+ $4.00 shipping
/shopsmith-10e-10er-fhp/D-7fuLl3MwKHVljfglCPSg==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Shopsmith 10E 10ER New Speed Changer Drive Belt Set. Manufactured by Goodyear, this is the recommended FHP belt set. Very flexible and smooth running. These belts grip better than a standard belt and transmit less vibration. Other Shopsmith 10ER parts are available. If you need something please contact me and I'll get it listed. I have new bearings for the quill, drive sleeve and speed changer. New Goodyear FHP belts are also in stock. Both the speed changer set and the single belt styles. Th
More

Shopsmith Upper & Lower...

$22.00
eBay Shopsmith Upper & Lower (short/long) Levers For Lathe Arm Adjustment Db
+ $7.55 shipping
/shopsmith-upper-lower/uJo_pvi_Rqfr9OIC2A5cjg==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
New Shopsmith Upper Lower Levers with long short studs for Lathe Arm adjustment These are spring loaded to allow the repositioning of the levers for the adjustment of the lathe tool arm and the lathe tool rest without the need for set screws requiring an allen wrench You are bidding only on the items in the first 3 pictures The other pics are only for depiction of installation application
More

Shopsmith Block Hand Sander...

$14.98
Lowe's Shopsmith Block Hand Sander 12192
Free Shipping
/shopsmith-block-hand/5LnegDES-rCEhd52AKQC_w==/info
Lowe's
( In stock )
Free Shipping
The high-density foam provides a cushioned sanding surfaces, saving your hands. The quick-change hook and loop holding system allows faster sheet changes. A steel reinforced plate adds weight which provides maximum control and ensures that the sanding block always remains flat.
More

Shopsmith 10e 10er...

$13.99
eBay Shopsmith 10e 10er Replacement Switch W/ Safety Cover
+ $4.00 shipping
/shopsmith-10e-10er/_KKDEUp4rqQDtRusD8LW8Q==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Shopsmith 10E 10ER Replacement Switch. Add a little safety to your Shopsmith by covering the exposed switch. Bright red color alows you to see it in the event of an emergency. If you want the safety cover only please contact me. Here's the spec's for the switch - Double Pole, Single Throw 20 Amp 125 Volt, AC 1-1/2 Hp Rated Other Shopsmith 10ER parts are available. If you need something please contact me and I'll get it listed. I have new bearings for the quill, drive sleeve and speed changer. N
More

Shopsmith 5 120 Grit 15/Pk...

$16.99
Ace Hardware Shopsmith 5 120 Grit 15/Pk Film Back Hook And Loop Sandpaper Disc 12053
No Shipping Info
/shopsmith-5-120-grit/GvHILI3dn1V5Revx8_Hx0Q==/info
Ace Hardware
( In stock )
5 8-hole 120 grit Lasts longer and cuts faster than other sanding discs Will not show edge wear thus protecting your sanding pad Film will not break down enabling discs to last longer Backing also provides a flatter sanding surface with traditional paper Premium resin resists clogging while allowing grain to cut faster Pack/15
More

Live Tailstock Center For...

$49.95
eBay Live Tailstock Center For Shopsmith 10e 10er
Free Shipping
/live-tailstock-center-for/uqC0dAoq5RO9n4TwdkTEDw==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Free Shipping
Click here to get eBay selling tools at Auctiva.com Questions?? Call our store 908-241-2885 or email Brand new live bearing tailstock.... Enjoy true accurate wood turning on your Shopsmith 10E and 10ER with no messy lubricants to stain or burn your project....No waiting and bidding just buy it now. Check our other Shopsmith parts auctions... *Tristateauto is not an authorized Shopsmith® parts or repair center and does not represent Shopsmith® Inc.
More

Shopsmith Jointer Bearings

$15.00
eBay Shopsmith Jointer Bearings
Free Shipping
/shopsmith-jointer-bearings/B2MnNGS3iipqGiQjlB5U-Q==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Free Shipping
Shopsmith NewJointer Bearings. These are premium grade bearings. Their loaded with Mobile Polyrex EM2 Grease and Nitrile Double Lip Seals. You'll get one set of two bearings. Limited Time! Free Shipping! Here's the spec's Inner Diameter:1/2 Outer Diameter: 1 1/8 Width:5/16 Grade: C3 Grease Lubrication: Mobile Polyrex EM2 Grease Other Shopsmith 10ER parts are available. If you need something please contact me and I'll get it listed. I have new bearings for the quill, drive sleeve and speed
More

Shopsmith 6-Grit 4-in W x...

$13.98
Lowe's Shopsmith 6-Grit 4-in W x 36-in L Sanding Belt Sandpaper 12151
+ $5.99 shipping
/shopsmith-6grit-4in-w-x/xBzgDNPg6ki9GoXZygQaBg==/info
Lowe's
( In stock )
Best for rapid wood removal during dimensioning, flattening and shaping. Removes rust and paint from siding, floors, decks, boats and lawn furniture. Extreme duty poly-cotton cloth backing.
More

Shopsmith 5 180 Grit 15/Pk...

$16.99
Ace Hardware Shopsmith 5 180 Grit 15/Pk Film Back Hook And Loop Sandpaper Disc 12055
No Shipping Info
/shopsmith-5-180-grit/hZmg2XYZH3NYKinW5jpL6w==/info
Ace Hardware
( In stock )
5 8-hole 180 grit Lasts longer and cuts faster than other sanding discs Will not show edge wear thus protecting your sanding pad Film will not break down enabling discs to last longer Backing also provides a flatter sanding surface with traditional paper Premium resin resists clogging while allowing grain to cut faster Pack/15
More

Shopsmith 10e 10er Table...

$10.99
eBay Shopsmith 10e 10er Table Insert new 1/4 Thick
+ $5.00 shipping
/shopsmith-10e-10er-table/EVPbltWVmLrCa8Sjq73EFA==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Shopsmith 10E 10ER Solid Table Insert, 1/4 Thick, Made by Me. Someone asked me to make them one to give them better support when using the drill press. Since I was making one it was just as easy to make a bunch of them. They've sold well so I'm still making them. Other Shopsmith 10ER parts are available. If you need something please contact me and I'll get it listed. I have new bearings for the quill, drive sleeve and speed changer. New Goodyear FHP belts are also in stock. Both the speed chan
More

Lathe Chuck 5 For Shopsmith...

$149.95
eBay Lathe Chuck 5 For Shopsmith Mark V 10e 10er
+ $9.95 shipping
/lathe-chuck-5-for/b4SDHxuZ-sGycGq1BccE8w==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Click here to get eBay selling tools at Auctiva.com Questions?? Call our store 908-241-2885 or email. Brand new 5 inch lathe chuck...5/8 bore with set screw to fit Shopsmith Mark V , ,10E and 10ER....Great for wood projects and light metals and composite materials... Reversable jaws...Jaws can grip wood from the outside or bore a hole in it and you can hold it from the inside while turning..(see pictures)....No waiting and bidding just buy it now!!! This is heavy so we ship it in a flat rate ($8.
More

Shopsmith 10e Or 10er Drive...

$15.99
eBay Shopsmith 10e Or 10er Drive Sleeve Bearings
Free Shipping
/shopsmith-10e-or-10er/HQbcuvsyN-P0zYEmEMj4Kw==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Free Shipping
Shopsmith 10E or 10ER New Drive Sleeve Bearings. These are after-market bearings graded as C3. I use these bearings in my Shopsmith 10ER and have no problems with them. Limited Time! Free Shipping! I also have complete bearing sets. Here's the spec's Type: Deep Groove Ball Bearings Closures: 2 Metal Shields Size: 25mm x 52mm x 15mm Inner Diameter: 25mm Outer Diameter: 52mm Width: 15mm Dynamic load rating Cr: 14,000 N Static load rating Cor: 7,900 N Grease Lubrication: 13,000 RPM Other Shopsmi
More

Shopsmith Mark Vii Drive Spur...

$64.95
eBay Shopsmith Mark Vii Drive Spur And Lathe Live Center Set
+ $5.25 shipping
/shopsmith-mark-vii-drive/gLl8NgakY7hMCmgh38e3UA==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
QUESTIONS??? EMAIL OR CALL 908-241-2885 New lathe spur center and live bearing center....For all Shopsmith model Mark VII Machines.. VISIT OUR STORE AND CHECK OUT THE OTHER SHOPSMITH PARTS AUCTIONS TO RESTORE YOUR HEADSTOCK TO TOP RUNNING CONDITION....... *Tristateauto is not an authorized Shopsmith® parts or repair center and does not represent Shopsmith® Inc...
More

Shopsmith 5 220 Grit 15/Pk...

$16.99
Ace Hardware Shopsmith 5 220 Grit 15/Pk Film Back Hook And Loop Sandpaper Disc 12056
No Shipping Info
/shopsmith-5-220-grit/wIyWF5Tel1ESJ7KdUtsBZw==/info
Ace Hardware
( In stock )
5 8-hole 220 grit Lasts longer and cuts faster than other sanding discs Will not show edge wear thus protecting your sanding pad Film will not break down enabling discs to last longer Backing also provides a flatter sanding surface with traditional paper Premium resin resists clogging while allowing grain to cut faster Pack/15
More

Shopsmith Mark V Bandsaw 2...

$36.95
eBay Shopsmith Mark V Bandsaw 2 Urethane Tires
Free Shipping
/shopsmith-mark-v-bandsaw/BHr6E3PQi0kmyH_RLLGjbw==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Free Shipping
Brand new set of 2 Ultra Duty .125 thick urethane bandsaw tires for all years Shopsmith bandsaws. Made in the USA. Consistant .125 thick across the entire width of the tire for precise blade tracking. Update your bandsaw with a set of 2 new urethane tires
More

Shopsmith 10e 10er 3/4 Hp...

$9.99
eBay Shopsmith 10e 10er 3/4 Hp Motor Bearings
+ $4.00 shipping
/shopsmith-10e-10er-34-hp/s4OYZgegkGW6o8UXndp-Jw==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Shopsmith 10E or 10ER New Motor Bearings. Imported Product. Set of two bearings. Their graded as EMQ (electric motor quality) C/3. Please check the dimensions of your bearings before purchasing them. Here's the spec's - Closures: Textured Buna Seals (Rubber, Both Bearings) Smaller Bearing Inner Diameter:5/8 Outer Diameter: 40mm Width: 12mm Larger Bearing Inner Diameter: 20mm Outer Diameter: 47mm Width: 14mm Other Shopsmith 10ER parts are available. If you need something please contact me and I'
More

Shopsmith Mark V Bandsaw 2...

$29.95
eBay Shopsmith Mark V Bandsaw 2 Urethane Tires
Free Shipping
/shopsmith-mark-v-bandsaw/SUs6zBcCmVlqa1ZD9OWF5A==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Free Shipping
Click here to get eBay selling tools at Auctiva.com Questions?? Tech help?? Call our store 908*241*2885 or email We can make any size tires so email or call and we will list what you need. Brand new set of 2 Blue Max Heavy duty .095 thick urethane band saw tires for Yuba Shopsmith and Magna 11 band saws. Our Blue Max Brand Urethane Band Saw Tires are the newest and most advanced band saw tires available. After years of testing we developed our own formula to make Blue Max urethane specificaly
More

Lathe Live Center For...

$49.95
eBay Lathe Live Center For Shopsmith Mark V 10e 10er
Free Shipping
/lathe-live-center-for/C2Xugp61tA5T34ljaGIMBg==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Free Shipping
Click here to get eBay selling tools at Auctiva.com Questions?? Call our store 908-241-2885 or email Brand new live bearing tailstock.... Enjoy accurate wood turning on your Shopsmith Mark V with no messy lubricants to stain or burn your project.... No waiting and bidding just buy it now!!!! See our other Shopsmith parts auctions for some hard to find bearings and discontinued parts including #105 Idler bearing made to the original design....The Idler bearing we sell is a direct replacement on a
More

Shopsmith 10e 10er Motor...

$9.99
eBay Shopsmith 10e 10er Motor Bearings
+ $4.00 shipping
/shopsmith-10e-10er-motor/-natPYVtM2RkzfQwnYCnjQ==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Shopsmith 10E or 10ER New Motor Bearings. Imported Product. Set of two bearings. Their graded as EMQ (electric motor quality) C/3. Here's the spec's - Closures: Textured Buna Seals (Rubber) Inner Diameter:5/8 Outer Diameter: 40mm Width: 12mm EMQ C/3 Grade Other Shopsmith 10ER parts are available. If you need something please contact me and I'll get it listed. I have new bearings for the quill, drive sleeve and speed changer. New Goodyear FHP belts are also in stock. Both the speed changer set a
More

Shopsmith Mark V 10er 10e 5/8...

$39.95
eBay Shopsmith Mark V 10er 10e 5/8 Adapter For Lathe Chuck
+ $6.85 shipping
/shopsmith-mark-v-10er-10e/WYZqRsBhVbs3D1t9oQPobQ==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
QUESTIONS????? TECH HELP??? CALL 908-241-2885 OR EMAIL High quality precision made Brand new made of steel lathe chuck and face plate adapter. 5/8 bore with set screw to fit all model shopsmith headstocks.Heavy duty precision made adapter has 1 inch with 8 threads per inch.With this adapter you can use many available lathe chucks and wood turning face plates. Most standard face plates from most other brand lathes are 1 X 8tpi You can now use these on your Shopsmith. Check our other auctions for
More

Wood Lathe Steel Chuck 4-jaw...

$149.99
eBay Wood Lathe Steel Chuck 4-jaw 6 Fits For Shopsmith 5/8 Spindle Bowl Turning
Free Shipping
/wood-lathe-steel-chuck/O-HhsYpcwWAGCVQ78GMDtw==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Free Shipping
Brand New!This is a brand new 6 x 4-Jaw Lathe Chuck with a 5/8 Un-threaded Insert for your Shopsmith. This independent chuck can hold a round, square, or irregular workpiece from 1 to 5-3/8 outside diameter, or 5-1/8 to 6-9/16 inside diameter (such as a bowl). The 3-level jaws are reversible, the body is bored to accept a 5/8 un-threaded insert (included) for your shopsmith.5/8 Un-threaded female bore insert included fits Shopsmiths. This chuck comes with a nice T-handle chuck key. It m
More

Shopsmith 15-Pack 180-Grit...

$14.98
Lowe's Shopsmith 15-Pack 180-Grit 5-1/4-in W X 3-in L Sandpaper Sheets 12185
Free Shipping
/shopsmith-15pack/-0e3dnvLTlEZ9t90pRSRMw==/info
Lowe's
( In stock )
Free Shipping
Removes rust and paint from siding, floors, decks, boats and lawn furniture. The quick-change hook and loop holding system allows faster sheet changes. Super sharp, fasting cutting grit.
More

Power Coupling Kit Design For...

$59.95
eBay Power Coupling Kit Design For Shopsmith Mark V 10er
+ $6.75 shipping
/power-coupling-kit-design/7IJv4oYrEefshX7LvMfMCg==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
One 5/8 inch bore hub for the headstock side and one 1/2 bore hub for accessories and an industrial reinforced rubber coupling. This tough new design coupling will last a lifetime.....
More

Shopsmith Mark V Headstock...

$134.95
eBay Shopsmith Mark V Headstock Rebuild Kit / Gilmer Drive
+ $6.85 shipping
/shopsmith-mark-v/J6sainz-MEYIBx9R7L6gdA==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Questions???? Tech help?? Call our shop 908-241-2885 or email. Brand new rebuild kit for your 1953-1960s Mark V headstock. Includes all bearings and belts to rebuild your headstock with gilmer style drive. Rebuild set contains 2 upper drive bearings,quill bearing,idler bearing,aand end bearing,button and loop for the end of the speed control sheave. Also includes a new drive belt and gilmer belt. We also sell the bearing set for your 3/4 or 1 1/8 hp motor for 20.00 additional Email or call if y
More

Shopsmith Mark V Speed...

$44.95
eBay Shopsmith Mark V Speed Control Sheave 2 Bearing Set
+ $4.85 shipping
/shopsmith-mark-v-speed/RxBUVg7KQjNRYQUNBWecWg==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
QUESTIONS??? TECH HELP? EMAIL OR CALL 908-241-2885 THIS BUY IT NOW AUCTION IS FOR A SET OF 2 BEARINGS TO REBUILD YOUR SPEED CONTROL SHEAVE ON ALL MARK V HEADSTOCKS. YOU GET THE IDLER BEARING AND THE SMALL BEARING THAT MOUNTS ON THE END OF THE SPEED CONTROL SHEAVE. IF THE END OF YOUR SPEED CONTROL SHEAVE IS CRACKED OR DAMAGED EMAIL US OR CALL AND WE CAN REPAIR IT FOR YOU. WE CAN REPAIR AND REBUILD YOUR SPEED CONTROL SHEAVE BACK TO NEW WORKING CONDITION. WE CAN ALSO INSTALL THESE BEARINGS FOR YOU
More

Shopsmith 100-Pack 180-Grit...

$49.98
Lowe's Shopsmith 100-Pack 180-Grit 5-in W x 5-in L Sanding Discs Sandpaper 12406
Free Shipping
/shopsmith-100pack/-QIEHSXkEKB2n1cCDht8Ug==/info
Lowe's
( In stock )
Free Shipping
Best for final preparation of all surfaces before finishing. Super sharp, fasting cutting grit. Better edge wear, tear-resistant film backing for longest life.
More

Setscrews For Shopsmith Model...

$11.50
eBay Setscrews For Shopsmith Model 10e - Er Woodworking Machines - Stainless Steel
+ $1.95 shipping
/setscrews-for-shopsmith/VtSfIBZytyzqKLto4orX6w==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Setscrews for ShopSmith Model 10E 10ER Woodworking Machines Grade 18-8 Stainless Steel These are NOT ShopSmith brand as that company does not sell stainless steel setscrews. This package of setscrews is especially intended to be used on the older ShopSmith Model 10E and 10ER machines. They will not fit in Mark V machines. On most of the areas of the machine, the older 10E/ERs use a larger size (3/8” diameter) setscrew than is used on Mark V machines. However, the setscrews used on the arbors
More

Shopsmith 10e Or 10er Quill...

$23.99
eBay Shopsmith 10e Or 10er Quill Bearing Set
Free Shipping
/shopsmith-10e-or-10er/tJKiGuoE_hz7qKzlftcjDA==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Free Shipping
Shopsmith 10E or 10ER New Quill Bearings. These bearings are a low cost alternative to the Fafnir or New Departure bearings. Their marked as HBC (whomever that is)and roll smooth. I measured them and their the exact same size as the Fafnir anf New Departure bearings I sell.The suppier that I get my bearings from recommened them and said they sell lots of them and have no problems with them. If you don't have the tools needed to press them in your quill contact me. I can do it for you. Other Sho
More

Shopsmith 10e 10er Speed...

$16.99
eBay Shopsmith 10e 10er Speed Changer Oilite Bearings
+ $3.00 shipping
/shopsmith-10e-10er-speed/4SGb2MLOuUd2x_Psi4Ju7A==/info
eBay
Buy it new & now! with eBay Buyer Protection ( In stock )
Shopsmith 10E 10ER Speed Changer Oilite Bearings. These bearings are impossible to find. You end up having to find something close and having it machined. I got lucky and found bearings of the correct inside and outside diameters and length. The flange has been machined to the right thickness. Other Shopsmith 10ER parts are available. If you need something please contact me and I'll get it listed. I have new bearings for the quill, drive sleeve and speed changer. New Goodyear FHP belts are also
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2014 eBay Inc. All Rights Reserved

Advertisement
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe140.sp4-19584
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe140.sp4-19584