Category

Tools and Accessories
Showing results for "shopsmith planer knife"
Results 1 - 40 of 1500+

Shopsmith 10e 10er Bearing Set

$59.99
eBay Shopsmith 10e 10er Bearing Set
Free Shipping
/shopsmith-10e-10er/pjE3KuCo9nszdHt0-cfiRA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Shopsmith 10E 10ER New Bearing Set. You get one set of Shopsmith 10E or 10ER new quill Bearings. These bearings are a low cost alternative to the Fafnir or New Departure bearings. Their marked as HBC (whomever that is)and roll smooth. I measured them and their the exact same size as the Fafnir anf New Departure bearings I sell.The suppier that I get my bearings from recommened them and said they sell lots of them and have no problems with them. Look at the second picture and you'll see the exte
More

Shopsmith Film Back Stick-On...

$12.62
Sears Marketplace Shopsmith Film Back Stick-On Sanding Disc 5
No Shipping Info
/shopsmith-film-back/BGUEAdyISRtZFrHhCJwXYg==/info
Sears Marketplace
IN_STOCK ( In stock )
SHOPSMITH FILM BACK STICK-ON SANDING DISC *5 *No hole *120 grit *Lasts longer and cuts faster than other sanding discs *Will not show edge wear thus protecting your sanding pad *Film will not break down enabling discs to last longer *Backing also provides a flatter sanding surface with traditional paper *Premium resin resists clogging while allowing grain to cut faster *Pack/15
More

Shopsmith Casters 555354

$111.00
Lowe's Shopsmith Casters 555354
Free Shipping
/shopsmith-casters-555354/kYsqDTv1Bj4lfVBg1tTUcw==/info
Lowe's
IN_STOCK ( In stock )
Free Shipping
Retractable Shopsmith casters bring added convenience and mobility to your Shopsmith Mark V or Mark 7 multi-purpose tool. A single step on the pedal raises your machine 1/4 off the floor for easy mobility. A double step raises it 1/2 off the floor.
More

Shopsmith Lathe Live Center...

$45.00
eBay Shopsmith Lathe Live Center -- In Sealed Tube
+ $7.75 shipping
/shopsmith-lathe-live/8wnqY3SJOPTNGfIPe0ysqQ==/info
eBay
IN_STOCK ( In stock )
Shopsmith Lathe Live Center – NEW in Sealed Tube! You are bidding on a new Shopsmith lathe live center – part number 505602. This item has never been opened – can’t get better than new!! Check out my other Shopsmith items. Please Read PRIOR To Bidding: I ship only to the 48 contiguous States . Item must be paid for within 48 hours of purchase via PayPal. I’ve provided the best description and photos that I can but feel free to ask any questions before you bid. Regarding my shipping ra
More

Shopsmith Film Back Stick-On...

$13.24
Sears Marketplace Shopsmith Film Back Stick-On Sanding Disc 5
No Shipping Info
/shopsmith-film-back/qzgoPkiz5MHTiJUVDJJ-UA==/info
Sears Marketplace
IN_STOCK ( In stock )
SHOPSMITH FILM BACK STICK-ON SANDING DISC *5 *No hole *220 grit *Lasts longer and cuts faster than other sanding discs *Will not show edge wear thus protecting your sanding pad *Film will not break down enabling discs to last longer *Backing also provides a flatter sanding surface with traditional paper *Premium resin resists clogging while allowing grain to cut faster *Pack/15
More

Shopsmith 10e 10er Table...

$65.99
eBay Shopsmith 10e 10er Table Insert Set new 1/4 Thick,
Free Shipping
/shopsmith-10e-10er-table/YkumM19jJ2Sn6kFTzKP5Ow==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Shopsmith 10E 10ER Table Insert Set, 1/4 Thick, made by Me.You get the 5 inserts that are shown plus 4 new leveling screws and 2 mounting bolts. If you have any questions please contact me. I make these as they sell so please give me a couple of days to make them up. You can contact me to see what I have in inventory and shipping time. I've made a few inserts to be used when the machine is being used as a drill press. It's a insert that has a 1 hole in the center to allow the drill bit to pas
More

Shopsmith Lathe Screw Center...

$25.00
eBay Shopsmith Lathe Screw Center -- In Sealed Tube
+ $7.75 shipping
/shopsmith-lathe-screw/JKOj_HvDm3Q_lUCnDzB3ew==/info
eBay
IN_STOCK ( In stock )
Shopsmith Lathe Screw Center – NEW in Sealed Tube! You are bidding on a new Shopsmith lathe screw center – part number 505601. This item has never been opened – can’t get better than new!! Check out my other Shopsmith items. Please Read PRIOR To Bidding: I ship only to the 48 contiguous States . Item must be paid for within 48 hours of purchase via PayPal. I’ve provided the best description and photos that I can but feel free to ask any questions before you bid. Regarding my shipping
More

Shopsmith 10e 10er Mark V...

$29.99
eBay Shopsmith 10e 10er Mark V Live Center
Free Shipping
/shopsmith-10e-10er-mark-v/wHnpgtUGbTbvSs8Jcx-nNQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Shopsmith 10E 10ER Live Center. This is a new center that fits in the tailstock of your Shopsmith. I got a deal on 20 of these so when their gone I'm not sure I'll be able to get more. These will fit machines other than Shopsmith as long as they use the MT2 center. Other Shopsmith 10ER parts are available. If you need something please contact me and I'll get it listed. I have new bearings for the quill, drive sleeve and speed changer. New Goodyear FHP belts are also in stock. Both the speed cha
More

Shopsmith Premium Sandpaper...

$8.17
Sears Marketplace Shopsmith Premium Sandpaper 180 Grit 9
No Shipping Info
/shopsmith-premium/CXnOikeEO8iZYL4MFThTig==/info
Sears Marketplace
IN_STOCK ( In stock )
SHOPSMITH PREMIUM SANDPAPER *180 grit *9 x 11 *Ultra flexible, anti clog and fast cutting *Stearate coated paper *Ideal for preparing wood, metal, fiberglass and painted surfaces *8 pack
More

Shopsmith 4-Pack 60-Grit 3-in...

$22.98
Lowe's Shopsmith 4-Pack 60-Grit 3-in W x 24-in L Sanding Belt Sandpaper 12132
+ $5.99 shipping
/shopsmith-4pack-60grit/pQrmeJAtnLRGPgU-3TYvKw==/info
Lowe's
IN_STOCK ( In stock )
Best for rapid wood removal during dimensioning, flattening and shaping. Removes rust and paint from siding, floors, decks, boats and lawn furniture. Extreme duty poly-cotton cloth backing.
More

Shopsmith Woodworking Power...

$230.00
Lowe's Shopsmith Woodworking Power Tool Accessory 556191
Free Shipping
/shopsmith-woodworking/oyJAJfybaGQFQ3VvWgAZmg==/info
Lowe's
IN_STOCK ( In stock )
Free Shipping
Shopsmith lift-assist significantly reduces operator effort required to raise Mark 7 or Mark V with PowerPro headstock upgrade from horizontal to vert. Reduces pounds of effort require to raise machine into vertical position from 65 lbs. to as little as zero, depending on the distance of Headstock fr. The complete kit includes step-by-step instructions for easy installation.
More

SHOPSMITH G2 HOOK AND LOOP...

$23.98
Sears Marketplace SHOPSMITH G2 HOOK AND LOOP SANDPAPER BLOCK REFILL - Sold As 3 Units
No Shipping Info
/shopsmith-g2-hook-and/GtgxQ5i9ncs1GySBEEKb4g==/info
Sears Marketplace
IN_STOCK ( In stock )
3'' X 5-1/4'' 100# grit 15 pack These premium hook and loop sheets provide a premium finish with the combination of the film backing and premium resin system this premium product is ideal for people who are looking for the perfect finish Sized to fit premium Shopsmith hook and loop sanding block (Ace no. 1485556) Carded
More

Shopsmith 10e 10er Headstock...

$49.99
eBay Shopsmith 10e 10er Headstock Bearing Set
Free Shipping
/shopsmith-10e-10er/NLyhu1HuCyLlQ1YSwXL_7g==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Shopsmith 10E 10ER New Headstock Bearing Set. You get one set of Shopsmith 10E or 10ER new quill bearings. These bearings are a low cost alternative to the Fafnir or New Departure bearings. Their marked as HBC (whomever that is)and roll smooth. I measured them and their the exact same size as the Fafnir anf New Departure bearings I sell.The suppier that I get my bearings from recommened them and said they sell lots of them and have no problems with them. Look at the second picture and you'll se
More

Shopsmith 10e 10er...

$13.99
eBay Shopsmith 10e 10er Replacement Switch W/ Safety Cover
+ $4.00 shipping
/shopsmith-10e-10er/0wmlsv45iUrZshnttFsyLQ==/info
eBay
IN_STOCK ( In stock )
Shopsmith 10E 10ER Replacement Switch.This switch is a upgrade to the original switch. Magna installed a single pole switch that broke only the hot side and isn't up to todays standards. This switch is a double pole meaning it breaks both the hot and neutral sides making the machine much safer. Add a little extra safety to your Shopsmith by covering the exposed switch. Bright red color allows you to see it in the event of an emergency. If you want the safety cover only please contact me. Here's
More

SHOPSMITH G2 HOOK AND LOOP...

$23.98
Sears Marketplace SHOPSMITH G2 HOOK AND LOOP SANDPAPER BLOCK REFILL - Sold As 3 Units
No Shipping Info
/shopsmith-g2-hook-and/d5UiGL2tUvo92CIqYILbhw==/info
Sears Marketplace
IN_STOCK ( In stock )
3'' X 5-1/4'' 150# grit 15 pack These premium hook and loop sheets provide a premium finish with the combination of the film backing and premium resin system this premium product is ideal for people who are looking for the perfect finish Sized to fit premium Shopsmith hook and loop sanding block (Ace no. 1485556) Carded
More

Shopsmith Premium Finishing...

$1.94
Lowe's Shopsmith Premium Finishing Pads 12215
+ $5.99 shipping
/shopsmith-premium/BF_uyXp8GtNIVPbxRMbkgA==/info
Lowe's
IN_STOCK ( In stock )
Cleaner and less hazardous than steel wool. Non-woven design resists clogging. Pad is extra flexible.
More

Shopsmith 10e 10er 3/4 Hp...

$9.99
eBay Shopsmith 10e 10er 3/4 Hp Motor Bearings
+ $4.00 shipping
/shopsmith-10e-10er-34-hp/IlqTE4mcIETSjsVMPQFvRw==/info
eBay
IN_STOCK ( In stock )
Shopsmith 10E or 10ER New Motor Bearings. Imported Product. Set of two bearings. Their graded as EMQ (electric motor quality) C/3. Please check the dimensions of your bearings before purchasing them. Here's the spec's - Closures: Textured Buna Seals (Rubber, Both Bearings) Smaller Bearing Inner Diameter:5/8 Outer Diameter: 40mm Width: 12mm Larger Bearing Inner Diameter: 20mm Outer Diameter: 47mm Width: 14mm Other Shopsmith 10ER parts are available. If you need something please contact me and I'
More

SHOPSMITH G2 HOOK AND LOOP...

$23.98
Sears Marketplace SHOPSMITH G2 HOOK AND LOOP SANDPAPER BLOCK REFILL - Sold As 3 Units
No Shipping Info
/shopsmith-g2-hook-and/gJkRwPUWeBsGwB8Tp4wd_A==/info
Sears Marketplace
IN_STOCK ( In stock )
3'' X 5-1/4'' 220# grit 15 pack These premium hook and loop sheets provide a premium finish with the combination of the film backing and premium resin system this premium product is ideal for people who are looking for the perfect finish Sized to fit premium Shopsmith hook and loop sanding block (Ace no. 1485556) Carded
More

Shopsmith Jointer Bearings

$15.00
eBay Shopsmith Jointer Bearings
Free Shipping
/shopsmith-jointer-bearings/Pm1x87oDIV0LvaVEwm3b2Q==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Shopsmith NewJointer Bearings. These are premium grade bearings. Their loaded with Mobile Polyrex EM2 Grease and Nitrile Double Lip Seals. You'll get one set of two bearings. Limited Time! Free Shipping! Here's the spec's Inner Diameter:1/2 Outer Diameter: 1 1/8 Width:5/16 Grade: C3 Grease Lubrication: Mobile Polyrex EM2 Grease Other Shopsmith 10ER parts are available. If you need something please contact me and I'll get it listed. I have new bearings for the quill, drive sleeve and speed
More

SHOPSMITH G2 HOOK AND LOOP...

$23.98
Sears Marketplace SHOPSMITH G2 HOOK AND LOOP SANDPAPER BLOCK REFILL - Sold As 3 Units
No Shipping Info
/shopsmith-g2-hook-and/kNoocVxxUCGk71HfJLkeEQ==/info
Sears Marketplace
IN_STOCK ( In stock )
3'' X 5-1/4'' 120# grit 15 pack These premium hook and loop sheets provide a premium finish with the combination of the film backing and premium resin system this premium product is ideal for people who are looking for the perfect finish Sized to fit premium Shopsmith hook and loop sanding block (Ace no. 1485556) Carded
More

Shopsmith 10e 10er Table...

$10.99
eBay Shopsmith 10e 10er Table Insert new 1/4 Thick
+ $5.00 shipping
/shopsmith-10e-10er-table/VzUdffSL2voO_L4DIXbu1g==/info
eBay
IN_STOCK ( In stock )
Shopsmith 10E 10ER Solid Table Insert, 1/4 Thick, made by Me. Someone asked me to make them one to give them better support when using the drill press. Since I was making one it was just as easy to make a bunch of them. They've sold well so I'm still making them. Other Shopsmith 10ER parts are available. If you need something please contact me and I'll get it listed. I have new bearings for the quill, drive sleeve and speed changer. New Goodyear FHP belts are also in stock. Both the speed chan
More

Shopsmith 28-Piece...

$483.00
Lowe's Shopsmith 28-Piece Woodworking Starter Package 556192
Free Shipping
/shopsmith-28piece/ms0fgK7ioESzV4EV_vOXsQ==/info
Lowe's
IN_STOCK ( In stock )
Free Shipping
28-piece starter accessory package for Shopsmith Mark 7 includes an assortment of drilling, sanding, lathe turning, shaping and routing accessories to. Includes 5 premium brad point drill bits including 1/4, 3/8, 1/2, 5/8, and 3/4 sizes for precise, easy centering and super-clean holes in wood. Includes 6 PSA-backed aluminum oxide sandpaper discs (1 coarse, 2 medium and 3 fine discs) for rough through smooth sanding.
More

Shopsmith 10e 10er Standard...

$11.99
eBay Shopsmith 10e 10er Standard Table Insert new 1/4 Thick
+ $5.00 shipping
/shopsmith-10e-10er/WfSpQVglNYvQTdl2E6K59A==/info
eBay
IN_STOCK ( In stock )
Shopsmith 10E 10ER Standard Table Insert, 1/4 Thick, made by Me. Other Shopsmith 10ER parts are available. If you need something please contact me and I'll get it listed. I have new bearings for the quill, drive sleeve and speed changer. New Goodyear FHP belts are also in stock. Both the speed changer set and the single belt styles. These are the ultra flexible, cogged style belt that's recommended. Combined shipping is no problem. If you want shipping insurance I'll do it but buyer pays for i
More

Shopsmith 10e Or 10er Drive...

$15.99
eBay Shopsmith 10e Or 10er Drive Sleeve Bearings
Free Shipping
/shopsmith-10e-or-10er/andhFWqKfBFGtjR9W0wtXg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Shopsmith 10E or 10ER New Drive Sleeve Bearings. These are after-market bearings graded as C3. I use these bearings in my Shopsmith 10ER and have no problems with them. Limited Time! Free Shipping! I also have complete bearing sets. Here's the spec's Type: Deep Groove Ball Bearings Closures: 2 Metal Shields Size: 25mm x 52mm x 15mm Inner Diameter: 25mm Outer Diameter: 52mm Width: 15mm Dynamic load rating Cr: 14,000 N Static load rating Cor: 7,900 N Grease Lubrication: 13,000 RPM Other Shopsmi
More

Shopsmith 10e 10er...

$9.99
eBay Shopsmith 10e 10er Replacement Switch
+ $4.00 shipping
/shopsmith-10e-10er/ibScI13p8mmLyJpFcIs5Lw==/info
eBay
IN_STOCK ( In stock )
Shopsmith 10E 10ER Replacement Switch. This switch is a upgrade to the original switch. Magna installed a single pole switch that broke only the hot side and isn't up to todays standards. This switch is a double pole meaning it breaks both the hot and neutral sides making the machine much safer. Here's the spec's - Double Pole, Single Throw 20 Amp 125 Volt, AC 1-1/2 Hp Rated Other Shopsmith 10ER parts are available. If you need something please contact me and I'll get it listed. I have new bear
More

Shopsmith Sanding Belt...

$7.48
Sears Marketplace Shopsmith Sanding Belt Ceramic 3
No Shipping Info
/shopsmith-sanding-belt/2QpIV3C4LcE4fBqhjAC7zQ==/info
Sears Marketplace
IN_STOCK ( In stock )
SHOPSMITH CERAMIC SANDING BELT *3 x 21 *120 grit *Premium high quality sanding belt with ceramic grain *Sands faster and cooler which keeps the resins from breaking down, allowing the belts to last longer than other belts *Made with polyester/cotton blend backing to provide better quality cloth backing *Pack/1
More

Shopsmith Mark V Bandsaw 2...

$36.95
eBay Shopsmith Mark V Bandsaw 2 Brand Urethane Tires
Free Shipping
/shopsmith-mark-v-bandsaw/BHr6E3PQi0kmyH_RLLGjbw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Brand new set of 2 Ultra Duty .125 thick urethane bandsaw tires for all years Shopsmith bandsaws. Made in the USA. Consistant .125 thick across the entire width of the tire for precise blade tracking. Update your bandsaw with a set of 2 new urethane tires
More

Shopsmith Mark Vii Drive Spur...

$64.95
eBay Shopsmith Mark Vii Drive Spur And Lathe Live Center Set Brand
+ $5.25 shipping
/shopsmith-mark-vii-drive/8AmMa6SbyDf6Ckcs2mvJjg==/info
eBay
IN_STOCK ( In stock )
QUESTIONS??? EMAIL OR CALL 908-241-2885 New lathe spur center and live bearing center....For all Shopsmith model Mark VII Machines.. VISIT OUR STORE AND CHECK OUT THE OTHER SHOPSMITH PARTS AUCTIONS TO RESTORE YOUR HEADSTOCK TO TOP RUNNING CONDITION....... *Tristateauto is not an authorized Shopsmith® parts or repair center and does not represent Shopsmith® Inc...
More

Shopsmith Mark V Lathe Drive...

$64.95
eBay Shopsmith Mark V Lathe Drive Spur + Live Center Set
+ $5.75 shipping
/shopsmith-mark-v-lathe/EJydqtowx0lT7WEZZ-4Q7A==/info
eBay
IN_STOCK ( In stock )
QUESTIONS??? EMAIL OR CALL 908-241-2885 This buy it now auction is for a brand new lathe drive spur center and live tailstock center....Enjoy true and accurate wood turning with this brand new set....This set Fits all Shopsmith models. No bidding and waiting and paying too much for old rusty dull parts,,Just buy it new and buy it now..... VISIT OUR STORE AND CHECK OUT THE SHOPSMITH CATAGORY IN OUR STORE FOR OTHER NEW PARTS TO RESTORE YOUR SHOPSMITH HEADSTOCK TO TOP RUNNING CONDITION...... BROWS
More

Shopsmith Woodworking Power...

$1,784.00
Lowe's Shopsmith Woodworking Power Tool Accessory Upgrade 556177
Free Shipping
/shopsmith-woodworking/3ZrlMuKb_cX0yo6vgOVYRw==/info
Lowe's
IN_STOCK ( In stock )
Free Shipping
Do-it-yourself PowerPro Headstock Upgrade kit for Shopsmith Mark V provides more horsepower, more torque, broader speed range, forward and reverse op. User selectable horsepower - 1-3/4-HP at 120-volt and 2-HP at 240-volt, just change plug. Infinitely variable speed range 250-10,000 RPM - both forward and reverse with constant torque at all speeds.
More

Shopsmith Shop Smith Mark V...

$125.10
eBay Shopsmith Shop Smith Mark V Home Workshop System Extension Table Top
No Shipping Info
/shopsmith-shop-smith-mark/9QDW44Uv5szV_Dvyy2K-kA==/info
eBay
IN_STOCK ( In stock )
chrysoula Store FREE SHIPPING IN THE USA ITEM IS NEW OLD STOCK RIGHT OUT OF A BOX THAT WAS NEVER USED. MAY HAVE A LITTLE DUST BUT NEVER USED. PLEASE SEE PHOTOS CLOSELY, WE DON'T WANT YOU TO GET SOMETHING YOU WON'T ENJOY. COST INCLUDES FREE INSURANCE ON THIS ITEM. WE SHIP WORLDWIDE. PLEASE LET US KNOW IF YOU HAVE QUESTIONS. WE WORK DURING THE DAY SO WE MAY NOT BE ABLE TO GET BACK TO YOUR QUESTIONS UNTIL EVENING. THANK YOU.
More

SHOPSMITH PREMIUM SANDING...

$23.10
Sears Marketplace SHOPSMITH PREMIUM SANDING SPONGE - 7344-030 - Case of 10 units (EA )
No Shipping Info
/shopsmith-premium-sanding/66bXcS5WJmJ8ddl5xZ7GLg==/info
Sears Marketplace
IN_STOCK ( In stock )
320 grit , 3'' x 5'' x 1'' , For extra fine scuffing (use on raw wood for fine smoothing) , Ultra flexible and anti clog , Stearate coated sponge , Sponge convenience with paper performance , Ideal for between coats of sanding latex and oil based paints stains polyurethanes varnishes sealers and lacquers , For use on wood metal fiberglass and painted surfaces
More

Shopsmith Block Hand Sander...

$14.98
Lowe's Shopsmith Block Hand Sander 12192
Free Shipping
/shopsmith-block-hand/5LnegDES-rCEhd52AKQC_w==/info
Lowe's
IN_STOCK ( In stock )
Free Shipping
The high-density foam provides a cushioned sanding surfaces, saving your hands. The quick-change hook and loop holding system allows faster sheet changes. A steel reinforced plate adds weight which provides maximum control and ensures that the sanding block always remains flat.
More

Shopsmith Mark V Headstock...

$134.95
eBay Shopsmith Mark V Headstock Rebuild Kit / Gilmer Drive
+ $6.85 shipping
/shopsmith-mark-v/J6sainz-MEYIBx9R7L6gdA==/info
eBay
IN_STOCK ( In stock )
Questions???? Tech help?? Call our shop 908-241-2885 or email. Brand new rebuild kit for your 1953-1960s Mark V headstock. Includes all bearings and belts to rebuild your headstock with gilmer style drive. Rebuild set contains 2 upper drive bearings,quill bearing,idler bearing,aand end bearing,button and loop for the end of the speed control sheave. Also includes a new drive belt and gilmer belt. We also sell the bearing set for your 3/4 or 1 1/8 hp motor for 20.00 additional Email or call if y
More

SHOPSMITH PREMIUM SANDING...

$23.10
Sears Marketplace SHOPSMITH PREMIUM SANDING SPONGE - 7342-030 - Case of 10 units (EA )
No Shipping Info
/shopsmith-premium-sanding/6LJkszNGHTVPTVt23X4qNw==/info
Sears Marketplace
IN_STOCK ( In stock )
120 grit , 3'' x 5'' x 1'' , Ultra flexible and anti clog , Stearate coated sponge , Sponge convenience with paper performance , Ideal for preparing woods drywall compound fiberglass metal and painted surfaces
More

Shopsmith 10e 10er Speed...

$11.99
eBay Shopsmith 10e 10er Speed Changer Parts
+ $3.00 shipping
/shopsmith-10e-10er-speed/gnyaiSoeUPP4coVAzB2DvQ==/info
eBay
IN_STOCK ( In stock )
Shopsmith 10E 10ER Speed Changer Parts. These are the parts that I most fequently replace when I rebuild a speed changer. You get 1 snap ring, 3 nylon lock nuts and 6 small washers. You also get 1 set screw that holds the speed changer to the headstock with a jam nut and washer. All parts are new. The snap ring has an anti-rust coating and all the other parts are stainless steel. New Goodyear FHP belts for the speed changer are also in stock. These are the ultra flexible, cogged style belt that
More

19612 Planer Knife Setting Jig

$103.52
Sears Marketplace 19612 Planer Knife Setting Jig
No Shipping Info
/19612-planer-knife/L8EyQGFP7eptwtJV86w4yg==/info
Sears Marketplace
IN_STOCK ( In stock )
Leaves hands free to adjust gibs and cutter head Keeps knives in perfect alignment while setting.
More

SHOPSMITH PREMIUM SANDING...

$23.10
Sears Marketplace SHOPSMITH PREMIUM SANDING SPONGE - 7365-030 - Case of 10 units (EA )
No Shipping Info
/shopsmith-premium-sanding/kQYkO2tKNGT7Qn9nkxlAsw==/info
Sears Marketplace
IN_STOCK ( In stock )
180 grit , 3'' x 5'' x 1'' , Ultra flexible and anti clog , Stearate coated sponge , Sponge convenience with paper performance , Ideal for preparing woods drywall compound fiberglass metal and painted surfaces
More

Shopsmith Woodworking Power...

$412.00
Lowe's Shopsmith Woodworking Power Tool Accessory Upgrade 556210
Free Shipping
/shopsmith-woodworking/h0mbzcDPQkGiu6LE7tppdg==/info
Lowe's
IN_STOCK ( In stock )
Free Shipping
Double tilt base upgrade allows your Shopsmith Mark V to perform under-table routing, shaping and drum sanding - just like a new Mark 7. Enjoy the added safety of under-table routing and shaping, where the workpiece often covers the bit or cutter, keeping your hands out of harm's way. Work more conveniently with under-table operations when routing or shaping an interior cut-out area since you don't have to retract and reset your bit.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2014 eBay Inc. All Rights Reserved

Advertisement
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.sp6-21623
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.sp6-21623