Sherline Products Home and Garden - Shopping.com

Category

Tools and Accessories
Showing results for "sherline products"
Results 1 - 22 of 22

Sherline Sherline T-shirt...

$12.50
eBay Sherline Sherline T-shirt [large Or Extra Large Only]
+ $8.00 shipping
/sherline-sherline-tshirt/gQbvOOLs_X_X9bCibgYouA==/info
eBay
IN_STOCK ( In stock )
Made in the USA!Leave a note to seller upon checkout indicating either large or extra large Show your Sherline Pride This crew neck, heather gray, T-shirt features Sherline USA screen printed across the chest. The casual, short-sleeve T is perfect for the shop for everyday wear.T-shirt Features Currently only available in sizes L-XL Heavy Cotton (99% cotton, 1% polyester) ScaleAutoArt is a Sherline approved dealer. Shipping is direct from Sherline and usually ships UPS Ground Service w/in 48 h
More

Sherline Lathe Quick Change...

$47.90
eBay Sherline Lathe Quick Change Tool Post With 2 Holders
+ $6.00 shipping
/sherline-lathe-quick/SEdBuulx1ZZWStB72bCAmw==/info
eBay
IN_STOCK ( In stock )
Sherline lathe quick change tool holder, new design adapted from a tried and true Taig design of ours. Made from 7075 Aircraft aluminum that has similar strengths to mild steel, but will not corrode, please note some markings will show on use. Item has some light tool marks, but has been light sanded and file to remove sharp edges. Includes tool post and 2 holders along with Sherline extended t-nut and attaching bolt. Tool is not included. Supports up to 3/8 tools but is optimum with 1/4 whic
More

For Sherline 3 Special Size...

$20.00
eBay For Sherline 3 Special Size Drive Belts 340mm
+ $2.50 shipping
/for-sherline-3-special/WjF0UBYgSBtGRgygloUXcQ==/info
eBay
IN_STOCK ( In stock )
Sale is for 3 Urethane with 4 steel internal bands New Special Drive Belt Included. (MB340), Not Available from Sherline. Eliminates the Pulleys Rubbing against the plastic casing Allows Fine Adjustment of Belt Tension (Important) Avoids Overheating Allows Max RPM and Motor HP Output.Tested and proved over 1000 Hours of Operation..
More

Sherline Milling Vise

$78.75
eBay Sherline Milling Vise
Free Shipping
/sherline-milling-vise/_wVrcUJsF8I7nzQQqH2YRQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Description Perfect working companion to the Sherline milling machine Jaw: 2.00 Wide x 1.00 Deep x 2.00 Open Includes two clamps Weight: 2.5 lb.This is the Sherline Milling Vise . A milling vise is the first accessory most mill owners purchase. It will handle a large percentage of the part-holding duties when milling. It is easy to use. The most convenient way to hold small parts for milling is with the milling vise. Milling vises are different from other machine vises in that they are desig
More

Sherline Suspended Hydraulic...

$159.00
eBay Sherline Suspended Hydraulic Scale 5000 Pound Free Shipping
Free Shipping
/sherline-suspended/l6MbjyeO1Nmx3OQgopohDA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
YOU ARE PURCHASING ONE NEW IN THE BOX SHERLINE HYDRAULIC 5000 POUND SCALE AS PICTURED PLEASE FEEL FREE TO EMAIL ME WITH QUESTIONS WELCOME TO MSANDCOMPANY2010 WE ARE LIQUIDATORS AND RESELLERS WE TRY TO OFFER THE BEST PRICE POSSIBLE WE TRY OUR BEST TO DESCRIBE ITEMS FAIRLY WE TEST ITEMS TO THE BEST OF OUR ABILITY AND ADVISE YOU IF WE CAN’T PLEASE IF YOU HAVE ANY QUESTIIONS CONTACT US THROUGH THE EBAY MESSAGE SYSTEM SHIPPING WE WILL MAKE EVERY ATTEMPT TO SHIP OUT THE SAME DAY OR THE VERY NEXT, I
More

Taig Or Sherline Rino Based...

$13.00
eBay Taig Or Sherline Rino Based Rotary Table Part 1.
+ $6.00 shipping
/taig-or-sherline-rino/x_bRe6-QZoTYGlCtnpoAfQ==/info
eBay
IN_STOCK ( In stock )
Taig or sherline lathe Rino mill ROTARY TABLE PART #1 For Rino Rotary Table. (not included)This PART assumes that you already Have the RINO Table Unit.PART #1 Sherline or Taig, 3/4 - 16 TPI Spindle Arbor, Accepts any Sherline/Taig Chucks.BB6Corp. Small Machine Parts NOTE: This is an Upgrade PART for the Rino Rotary Table..
More

Sherline 4 Jaw Chuck P/n 1071...

$95.55
eBay Sherline 4 Jaw Chuck P/n 1071 M12 X 1.0mm Mounting Thread In Original Box
+ $6.80 shipping
/sherline-4-jaw-chuck-pn/eRFKYi-Bqwcxi7az7ssCAw==/info
eBay
IN_STOCK ( In stock )
Sherline 4 Jaw Chuck P/N 1071 M12 x 1.0mm Mounting Thread New in Original Box with Hex Key to tighten jaws Nice precision chuck On Jul-30-16 at 11:12:01 PDT, seller added the following information:
More

For Sherline Taig Drive Belts...

$27.00
eBay For Sherline Taig Drive Belts - 3 - Extended Sizes 500mm
+ $4.50 shipping
/for-sherline-taig-drive/j378vIBaGd5oqDZCgUsmeQ==/info
eBay
IN_STOCK ( In stock )
Sale is for 3 Urethane with 4 steel internal bands EXTENDED SIZES 450, 500MM (50CM), 520, 540, 550 MM (55CM)Your Choice. 500 with 550 you can change speed without moving Motor For Sherline Lathe Head Stock with External Motors For Taig Lathe, Replace the 3m-500 Belt. Much Smoother High Performance (10,000 Hours)Best Deal in the USA Money Back Guarantee. BB6Corp.
More

Build Your Own Plans-quick...

$12.99
eBay Build Your Own Plans-quick Change Tool Post Fits Unimat, Lathe, Atlas, Sherline
+ $2.45 shipping
/build-your-own/FQau7aCX46tDbkrR56KHpg==/info
eBay
IN_STOCK ( In stock )
BUILD YOUR OWN PLANS--QUICK CHANGE TOOL POST fits Unimat, Lathe, Taig, Sherline and all small lathes up to 7 X 16 Minilathe 1-3/8 square quick change tool post Customizable to fit any lathe .472 (12MM) minimum vertical center distance required from the centerline of lathe headstock to top of compound cross slide) 1/2 X 7/8 X 1-3/8quick change tool holders hold 1/4 tool bits (tool slot size is 5/16) Robust construction, repeatable, rigid, smooth and positive operation Saves set up time on
More

3/8 Dia. Diamond Drag...

$59.00
eBay 3/8 Dia. Diamond Drag Engraving Bit,stainless Body, Sherline, Taig Cnc Mill
+ $6.80 shipping
/38-dia-diamond-drag/MUG4puLYdcwnzDVBLVwH7A==/info
eBay
IN_STOCK ( In stock )
ON SALE ! MADE IN THE U.S.A. This listing is for a spring-loaded diamond drag engraving bit.TIPS ARE 90 DEGREE ......... (THIS IS A DRAG BIT SO THERE IS NO RPM SPEED NEED ) .It has a 3/8 DIA. STAINLESS BODY .This tool is suitable for small machines and large machines alike. It will fit in the spindle of a Taig Mill with the ER16 Collet set up, and can compensate for smooth uneven surfaces due to the spring loaded design... Caution is needed for excessive feedrates and rough surfaces would damag
More

The Beall I-x Internal...

$99.95
eBay The Beall I-x Internal Expanding Collets Made In Usa For Taig Or Sherline
+ $7.00 shipping
/the-beall-ix-internal/z6M8k0qaNxc46rWYwISCMg==/info
eBay
IN_STOCK ( In stock )
Beall I-X (internal expanding ) Collets are new products just for woodturners which can be used instead of jam chucks to mount turnings on a lathe.Insert one in a hole bored in your work and the jaws will expand inside to clamp it securely. I-X Collets have a 1/2 mounting shaft which enables them to be used with a standard drill chuck making it ideal for micro lathes such as Taig or Sheline.Sizes fit inside hole diameters from 1/2 to 1-1/2 and come in one eighth inch increments. The full set
More

Edge Finder 1/4 Or 3/8 Or 1/2...

$13.50
eBay Edge Finder 1/4 Or 3/8 Or 1/2 Shank Micro Fisher Usa---1/4 Shank For Sherline
+ $4.50 shipping
/edge-finder-14-or-38-or/IuXqtcBiiDOPgb4tO-KsbA==/info
eBay
IN_STOCK ( In stock )
I am offering four sizes of edge finders made by Fisher Machine in Hawthorne Ca. They are hardened and ground to an accuracy of .0002 inch.----- They are--- (MODEL 250 ) 1/4 shank x .2000 tip---- or (MODEL A ) 3/8 shank x .2000 tip---or (MODEL B) 1/2 shank x .2000 tip----- or (MODEL BB ) 1/2 shank x .5000 tip. ----------------- -----When you purchase send a note to me (you can use ASK A QUESTION near the bottom this page) with your preference of MODEL or shank size and tip size. ------------ Ot
More

Digitizing Touch Probe Cnc...

$198.55
eBay Digitizing Touch Probe Cnc Toolsetter 3/8 Adjust Shank For Mach3 Sherline Taig
+ $4.00 shipping
/digitizing-touch-probe/actJTPY24tACDVCo5rFQTg==/info
eBay
IN_STOCK ( In stock )
202030 - Touch Trigger Probe / Tool Setter TP-100 w/6' shielded cable, no connector. Made in USA. Note: This probe has a centering adjustable shank Centering instructions for TP100 and TP-1000 Probes .PDF File requires Acrobat or other reader. The TP-100 contact probe is a 3/8 shank, 5 way mechanical contact scanning device with a 2mm ( .0787 in) diameter ruby tip. It is used with CNC milling and CNC routing style machines to digitize surface and contour data. When used as a probe the shank is
More

Stainless Cnc Digitizing...

$236.55
eBay Stainless Cnc Digitizing Touch Probe Toolsetter 3/8 Adj For Mach3 Sherline Taig
+ $4.00 shipping
/stainless-cnc-digitizing/ylhL80BnuzEO2S3eQhtMOA==/info
eBay
IN_STOCK ( In stock )
202030S - Touch Trigger Probe / Tool Setter TP-1000 w/6' shielded cable, no connector. Stainless Steel body Made in USA.Note: This probe has a centering adjustable shank Centering instructions for TP100 and TP-1000 Probes .PDF File requires Acrobat or other reader. The TP-1000 contact probe is a 3/8 shank, 5 way mechanical contact scanning device with a 2mm ( .0787 in) diameter ruby tip. It is used with CNC milling and CNC routing style machines to digitize surface and contour data. When used a
More

202031 Touch Tool Setter For...

$151.05
eBay 202031 Touch Tool Setter For Cnc Mill Router W/ Mach3 Linuxcnc Sherline Taig
+ $4.00 shipping
/202031-touch-tool-setter/uQoqB453_KrkJIYk2dcgYA==/info
eBay
IN_STOCK ( In stock )
202031 - Touch Trigger Tool Sensor TP-103 w/6' shielded cable, no connector. Set height = 1.70 inch approx. The TP-103 is a table based tool measurement instrument. It is used to measure tool lengths on a CNC mill or CNC router. This device will typically measure the Z tool length of a tool within .001 inch. It is a soft touch device, and will not chip or dull cutting tools that come in contact with the flat stylus. There is approximately .100 inch of over travel before the device bottoms out,
More

5/16 Rohm Drill Chuck For...

$44.50
eBay 5/16 Rohm Drill Chuck For Sherline Lathe With 1 Arbor For Lathe Or Mill
Free Shipping
/516-rohm-drill-chuck-for/iZ-V-V8669lITTZAhxsUZQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
NOS 5/16 Rohm Drill Chuck for Sherline Lathe Mill with #1 Arbor Perfect size between 1/4 and 3/8 chucks. This is a beautiful, high quality West German made Rohm 5/16 drill chuck and a Sherline #1 arbor to mount on the headstock of any Sherline Lathe or in any of the Sherline Mills. The chuck has a 3/8 x 24 tpi mount and it comes complete with key. It has NEVER BEEN USED and is still in the box. Although it has been around a while, it has a much nicer finish and feel than those of current manufa
More

Blue Max 1/4 Round Drive Belt...

$11.95
eBay Blue Max 1/4 Round Drive Belt For Sherline Bs360 Band Saw
Free Shipping
/blue-max-14-round-drive/iw5AjzMkTSPSmzXfhZ-svQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
1 BLUE MAX 1/4 Round drive belt for SHERLINE BS360 3 speed band saw.Our Blue Max urethane is industrial grade urethane made here in the USA and contains No regrind scraps in the mix. This is not food safe orange conveyor belting like everybody else is selling.Blue Max industrial grade urethane is only available from the Band saw Tire Warehouse.
More

Sherline 4335 10000 Rpm...

$99.99
Automotive Parts Factory Sherline 4335 10000 Rpm Pulley Set
+ $14.93 shipping
/sherline-4335-10000-rpm/-4cnBr6UuyrN_a_RUjeIIQ==/info
Automotive Parts Factory
IN_STOCK ( In stock )
Store not rated
If your cutting needs demand a maximum speed higher than Sherlines standard 2800 RPM, this pulley conversion may be just what you need. In just a few minutes you can remove the stock pulleys and replthem with a ratio that will allow the standard motor and drive belt to turn the spindle at up to 10,000 RPM. No modifications and not special tools are required. A second pulley position is also included that allows you to drop the maximum speed back to 2200 RPM for more power when doing standard machining jobs.The high speed pulley set will be welcomed by those doing engraving with small diameter tools or those turning very small watch shafts. If fits any Sherline headstock utilizing the DC motor supplied since 1993. (Not designed for use on older AC/DC motors identified by the smaller speed... Less
More

1/4 Rohm Drill Chuck With 0...

$45.95
eBay 1/4 Rohm Drill Chuck With 0 Arbor For For Sherline Lathe Tailstock Mount
Free Shipping
/14-rohm-drill-chuck-with/wFdWsxPOA2iuUxVzvs0TLg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
NOS 1/4 Rohm Drill Chuck for Sherline Lathe with #0 Arbor Perfect for sho rt run production. This is a beautiful, high quality West German made Rohm 1/4 drill chuck and a #0 Sherline arbor to mount on the tailstock of any Sherline Lathe. The chuck has a 3/8 x 24 tpi mount and it comes complete with key. It has NEVER BEEN USED and is still in the box. Although it has been around a while, it has a much nicer finish and feel than those of current manufacture. This will come in handy if you have
More

3 Blue Max Urethane Band Saw...

$37.95
eBay 3 Blue Max Urethane Band Saw Tires And Drive Belt For Sherline Bs360 Band Saw
Free Shipping
/3-blue-max-urethane-band/wi7XP8kJ4IWbZ0cJqpwp8w==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Questions?? Tech help?? Call our store 908-241-2885 or email We can make any size tires so email or call and we will list what you need.Brand new set of 3 BLUE MAX heavy duty urethane bandsaw tires and round drive belt for Sherline 3 wheel model BS360 band saw.Blue Max TM Urethane Band Saw Tires are the newest and most advanced band saw tires available made in the USA. We do not use Chinese made orange or transparent urethane that cracks and falls apart...After years of testing we developed our
More

38 Piece 1/4 Premium C6...

$27.95
eBay 38 Piece 1/4 Premium C6 Carbide Tipped Tool Bit Set Fits Sherline Lathe & More
+ $11.50 shipping
/38-piece-14-premium-c6/unjh0O1DJkSRHURPARfBsA==/info
eBay
IN_STOCK ( In stock )
Home |All Listings |About Us |Feedback |FAQs |Bookmark |Newsletter |Contact Us
More

3.11 Fully Machined Threaded...

$24.50
eBay 3.11 Fully Machined Threaded Back Plate 3/4 X 16” For 3 3 Or 4 Jaw Chuck
+ $7.50 shipping
/311-fully-machined/pgWx1F87VsU7kJNHbGevrQ==/info
eBay
IN_STOCK ( In stock )
SHARS 3.11 Fully Machined Threaded Back Plate 3/4 x 16 TPI for Sherline 3 or 4 Jaw Lathe Chuck Product Code 202-6212 Product description Mounting Thread Size: 3/4 x 16 TPI Shoulder Diameter: 2.25Bolt Circle Diameter: 2.598Flange Thickness: 0.47''Shoulder boss: 0.12'' No. of Bolt Holes: 6 Product features Fully machined back plate can be mounted onto 33 jaw or 4 jaw self centering and independent lathe chuck (p/n 202-5408, 202-5471, 202-5418). As long as back plate Shoulder Diameter 2.25 ch
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp16.facebook.pixel-30381
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp16.facebook.pixel-30381