Scope Mount Winchester 100 Electronics Optics Accessories - Shopping.com

Category

Optics Accessories
Showing results for "scope mount winchester 100"
Results 1 - 40 of 1500+

XS Lever Scout Scope Base...

$54.00
MidwayUSA XS Lever Scout Scope Base Picatinny-Style Winchester 94 Angle Eject Matte
Free Shipping
/xs-lever-scout-scope-base/LSv8hF6Grmmpv35zYggcgw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
This Picatinny-style base is machined from lightweight aluminum and allows a scope or red dot sight to be mounted in the forward, scout rifle position. For use with rifles that have a rear dovetail located approximately 4 from receiver. Non-angle eject rifles will require drilling and tapping. Black anodized finish. Please note: This mount is attached to the rifle with hard epoxy and installation requires significant gunsmithing. Once installed, the base becomes a permanent fixture and cannot be removed. For more detailed information, please consult the Technical Specifications & Use link below.Technical InformationMateri al: Anodized aluminum Finish: Black Features: Allows forward mounting of scout scopes or red dot sights. Gunsmithing Required: Yes, see installation procedure Notes: For... Less
More

Ironsighter 1-Piece...

$13.99
MidwayUSA Ironsighter 1-Piece Weaver-Style Scope Base Winchester 70 Short Action Matte
+ $4.99 shipping
/ironsighter-1piece/3SoJQycW1en_lg98gooWNA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Aluminum alloys bases designed to withstand extreme outdoor conditions. Mounting hardware included. Technical InformationMateri al: High-grade aluminum Notes: Mounting Hardware Included
More

Egw Winchester 88 / 100...

$39.99
eBay Egw Winchester 88 / 100 Picatinny Scope Mount
+ $6.50 shipping
/egw-winchester-88-100/KjBauPi00dEKY6fLLfsPZQ==/info
eBay
IN_STOCK ( In stock )
Made in the USA!This base will fit both the Winchester Model 88 and the Model 100.Machined from: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Mounting Hardware: Hex head screws and wrench provided Center Spread: 2.45Overall Length: 5.882Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in man
More

Ironsighter 1-Piece...

$13.99
MidwayUSA Ironsighter 1-Piece Weaver-Style Scope Base Winchester 70 Long Action Matte
+ $4.99 shipping
/ironsighter-1piece/xY8jm6qND47-5nKD3HhCbg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Aluminum alloys bases designed to withstand extreme outdoor conditions. Mounting hardware included. Technical InformationMateri al: High-grade aluminum Notes: Mounting Hardware Included
More

Talley Lightweight 2-Piece...

$39.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Winchester 70 Post-64 Matte Low
+ $4.99 shipping
/talley-lightweight/MXC5B3OKB_rw9C8d40kHBQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Low: .400 Medium: Front: .500, Rear: .625 High: .600 Extra-High: .800
More

Talley Lightweight 2-Piece...

$39.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Winchester 70 Post-64 Matte High
+ $4.99 shipping
/talley-lightweight/O9s6UMXv-zXMamGZ_yLtfg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Low: .400 Medium: Front: .500, Rear: .625 High: .600 Extra-High: .800
More

Wideview See-thru Scope Mount...

$18.00
eBay Wideview See-thru Scope Mount Winchester 88 100 Silver Mount
Free Shipping
/wideview-seethru-scope/SEDjldMpxQR6p8Y-59vjtA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Winchester 88, 100.. These see-thru mounts let you switch from scope to iron sights instantly. Don't miss that close running shot because you can't find it in your scope. Screws directly to the receiver. Mounts are reversable for extra eye relief. Fits a one inch scope. New in the package.IF YOU DON'T SEE THE MOUNT YOU NEED E-MAIL US, WE PROBABLY HAVE IT. WE WILL DIRECT YOU TO THE PROPER AUCTION OR LIST IT FOR YOU. ALL SCREWS ARE INCLUDED. TWO SHIP FOR THE SAME PRICE AS ONE. PICTURE IS OF THE O
More

Talley Lightweight 2-Piece...

$47.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Winchester 70 Post-64 Matte Extra-High
+ $4.99 shipping
/talley-lightweight/yWU8jiSctMG2Kg2VxNfmqg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Low: .400 Medium: Front: .500, Rear: .625 High: .600 Extra-High: .800
More

Talley Lightweight 2-Piece...

$39.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Winchester 70 Post-64 Matte High
+ $4.99 shipping
/talley-lightweight/h6gka_9nUlR_OX2pOvdmNQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Low: .400 Medium: Front: .500, Rear: .625 High: .600 Extra-High: .800
More

Talley Lightweight 2-Piece...

$39.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Winchester 70 Post-64 Matte Medium
+ $4.99 shipping
/talley-lightweight/-TX2gqEGw3t8Q36SyYItow==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Low: .400 Medium: Front: .500, Rear: .625 High: .600 Extra-High: .800
More

Talley Lightweight 2-Piece...

$39.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Winchester 70 Post-64 Matte Low
+ $4.99 shipping
/talley-lightweight/4fI_L_4BsW4QpRTPLf9SvA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Low: .400 Medium: Front: .500, Rear: .625 High: .600 Extra-High: .800
More

Talley Lightweight 2-Piece...

$39.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Extended Rings Winchester 70 Post-64 Matte Low
+ $4.99 shipping
/talley-lightweight/9zfZncW9f7GDDd98kmrt9w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: .400 from bottom of ring opening to rifle receiver
More

Talley Lightweight 2-Piece...

$39.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Extended Front Winchester 70 Post-64 Matte High
+ $4.99 shipping
/talley-lightweight/f8Zk7XUt5UZ4synkZpB0mA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: Aluminum Ring Height: from bottom of ring opening to rifle receiver Medium: .500 High: .600 Extra-High: .800 Notes: Includes attachment screws and allen wrench
More

DNZ Hunt Master 2-Piece Scope...

$66.95
MidwayUSA DNZ Hunt Master 2-Piece Scope Mounts with Integral 30mm Rings Winchester 70 Post-64, Marlin XL7, XS7 Matte High
+ $4.99 shipping
/dnz-hunt-master-2piece/Ga4wZb485J5oAou9mv72hA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Signature Series DNZ Huntmasters 2-piece Scope Mount is precision machined from solid block 6061T6 aluminum for an extremely rugged mount that weigh approxamatley 1/3 of steel ring base combos. These easy to install ring mounts require no special tools and provide a rock solid mounting platform with hardened grade eight screws with up to 4x more threads than competing products. This system eliminated the need for selecting a ring and base separate that can loosen over time under the recoil of modern firearms. The Hunt Master series is a solid mount that will will hold true while looking great atop your rifle. Technical Information Material: 6061T6 Aluminum Ring Height:(measured from base of ring to bottom of scope tube) Low: .420 Medium: .545 High: .670 Notes Integral scope rings... Less
More

Talley Lightweight 2-Piece...

$47.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Winchester 70 Post-64 with .330 Rear Mount Hole Spacing Matte Medium
+ $4.99 shipping
/talley-lightweight/h3yfEA_Z4n3D7lJ44xbk1Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: Aluminum Ring Height: from bottom of ring opening to rifle receiver Low: .400 High: .600 Extra-High: .800 Notes: Includes attachment screws and allen wrench
More

Talley Lightweight 2-Piece...

$39.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Browning A-Bolt Winchester Super Short Magnum (WSSM) Matte Medium
+ $4.99 shipping
/talley-lightweight/L6IetOaRhnhbOlY0qNm2aw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: Aluminum Ring Height: from bottom of ring opening to rifle receiver Low: .400 Medium: .500 Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation
More

Browning AB3 Integrated Scope...

$52.71
Walmart.com Browning AB3 Integrated Scope Mount System 30mm Ring Diameter, High Ring Height
Free Shipping
/browning-ab3-integrated/VGVA21WPn8JdwBN5Gd7b0A==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Browning AB3 Integrated Scope Mount System 30mm Ring Diameter, High Ring Height:Machined from 7000 series aluminum30mm ring diameter High height
More

Leupold 2-Piece man Scope...

$9.99
MidwayUSA Leupold 2-Piece man Scope Base Weaver-Style Winchester 70 Matte
Free Shipping
/leupold-2piece-man-scope/YEb0DHZukHZO7UP-k4ag5g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Leupold Rifleman scope bases are precision- machined from aircraft-grade aluminum to provide the necessary strength and recoil resistance without adding excess weight to the rifle. The 2-Piece design offers more mounting flexibility and accessibility to the breech of your rifle. Bases will work with any Weaver-Style rings.Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Winchester Model 70 Notes: Allen Screws and wrench included
More

Leupold 2-Piece Quick-Release...

$59.99
MidwayUSA Leupold 2-Piece Quick-Release Scope Base Winchester 70 Matte
Free Shipping
/leupold-2piece/uMJGANcLVvj6G-0FbXSDuQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
With Leupold Quick Release steel bases you can mount a scope, zero it, remove it, reattach it and remain nearly dead-on with your original point of impact. The key is precise machining of the patented lever mechanism. Turning the lever forward engages the base of the ring, pulling the ring down and forward, locking it into its zero position. Technical Information Base Style: Leupold Quick-Release Material: Steel Notes: Mounting Hardware Included Fits: Winchester 70 Express Pre '64 (.435 Rear mount hole spacing for .416 Remington, H&H models 300 and 375, 300 Winchester Magnum
More

Aero Precision Ultralight...

$89.99
Brownells Aero Precision Ultralight Extended Scope Mounts - Ultralight 1 Extended Scope Mount Black
+ $7.95 shipping
/aero-precision-ultralight/NEq7TnkKD4cXkPOR0Jxi-g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Featuring a rigid, lightweight design, Aero Precisions' Ultralight Extended Scope Mounts complement many high-end optic platforms. These scope mounts are designed to fit Mil-Spec 1913 Picatinny rails with a cross-slot keyway that offers excellent recoil protection. The Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry. Rear ring is pushed forward 1 for better eye relief Designed for AR type upper receivers 6061 T6 extruded aluminum construction Rigid and lightweight Weight: 3.07oz Mfg: Aero Precision
More

Leupold 1-Piece Standard...

$24.99
MidwayUSA Leupold 1-Piece Standard Scope Base Winchester 70 Long Action Gloss
Free Shipping
/leupold-1piece-standard/2Useo4z7Mxjr4GcduqNw_A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold steel bases are designed specifically to withstand the toughest recoil. One-piece bases provide solid mounting options for your rifle. Bases accept any Standard-style rings. Technical InformationMateri al: Steel Style: Standard Fits: Winchester Models 70, 670, 770, 70A (Serial # above 66,350) Does not fit 375 H&H or 300 Win Mag Long Action Notes: Torx heads and driver included.
More

Leupold 1-Piece Standard...

$24.99
MidwayUSA Leupold 1-Piece Standard Scope Base Winchester 70 Long Action Matte
Free Shipping
/leupold-1piece-standard/UKzB1Yt4Afxsvi5AcvIdOQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold steel bases are designed specifically to withstand the toughest recoil. One-piece bases provide solid mounting options for your rifle. Bases accept any Standard-style rings. Technical InformationMateri al: Steel Style: Standard Fits: Winchester Models 70, 670, 770, 70A (Serial # above 66,350) Does not fit 375 H&H or 300 Win Mag Long Action Notes: Torx heads and driver included.
More

Leupold 2-Piece Standard...

$24.99
MidwayUSA Leupold 2-Piece Standard Scope Base Winchester 70 Reversible Rear Gloss
Free Shipping
/leupold-2piece-standard/FmGOHwLFvubHlsfzthX5pw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard 2-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. These steel bases will fit both right and left handed actions and will work with all brands of Standard Rings. Technical InformationMateri al: SteelStyle: Standard Notes: Allen Screws and wrench includedFits Winchester Model 70 Serial #66,350 & Above
More

Leupold 2-Piece Standard...

$32.99
MidwayUSA Leupold 2-Piece Standard Scope Base Winchester 70 Reversible Front and Rear Silver
Free Shipping
/leupold-2piece-standard/LrVvka5v1TKirZf0vl0KpA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard 2-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. These steel bases will fit both right and left handed actions and will work with all brands of Standard Rings. Technical InformationMateri al: SteelStyle: Standard Notes: Allen Screws and wrench includedFits Winchester Model 70 Serial #66,350 & Above
More

Leupold 2-Piece Standard...

$46.99
MidwayUSA Leupold 2-Piece Standard Scope Base Winchester 70 Reversable Rear with 1 Medium Rings Matte
Free Shipping
/leupold-2piece-standard/SJgk8ia9Y40QBtz5944aBQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard 2-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. These steel bases will fit both right and left handed actions and will work with all brands of Standard Rings. Technical InformationMateri al: SteelStyle: Standard Notes: Allen Screws and wrench includedFits Winchester Model 70 Serial #66,350 & Above
More

Leupold 2-Piece Standard...

$24.99
MidwayUSA Leupold 2-Piece Standard Scope Base Winchester 70 Reversible Rear Matte
Free Shipping
/leupold-2piece-standard/idp5ktiMQgUEdtOCsET25Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard 2-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. These steel bases will fit both right and left handed actions and will work with all brands of Standard Rings. Technical InformationMateri al: SteelStyle: Standard Notes: Allen Screws and wrench includedFits Winchester Model 70 Serial #66,350 & Above
More

Leupold 2-Piece Standard...

$46.99
MidwayUSA Leupold 2-Piece Standard Scope Base Winchester 70 Reversable Rear with 1 High Rings Matte
Free Shipping
/leupold-2piece-standard/itZpY1WJSGUFiX_N0YLr7Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard 2-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. These steel bases will fit both right and left handed actions and will work with all brands of Standard Rings. Technical InformationMateri al: SteelStyle: Standard Notes: Allen Screws and wrench includedFits Winchester Model 70 Serial #66,350 & Above
More

Leupold 2-Piece Standard...

$24.99
MidwayUSA Leupold 2-Piece Standard Scope Base Winchester 70 Reversible Front and Rear Matte
Free Shipping
/leupold-2piece-standard/pyIhxSNlX7cirKhQrOxaHA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard 2-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. These steel bases will fit both right and left handed actions and will work with all brands of Standard Rings. Technical InformationMateri al: SteelStyle: Standard Notes: Allen Screws and wrench includedFits Winchester Model 70 Serial #66,350 & Above
More

American Technologies Network...

$109.99
Academy Sports and Outdoors American Technologies Network PS28 Scope Mounting System (0658175906100)
+ $7.25 shipping
/american-technologies/3XLtbDIdLfZNelaAdvyY3g==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
The American Technologies Network PS28 Scope Mounting System helps mount a PS28 scope in front of a day scope with 1 bolt adjustment.
More

Leupold 2-Piece Standard...

$24.99
MidwayUSA Leupold 2-Piece Standard Scope Base Winchester 70 Reversible Front and Rear Gloss
Free Shipping
/leupold-2piece-standard/uKMd4PVtCKab7jIu3_5NbA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard 2-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. These steel bases will fit both right and left handed actions and will work with all brands of Standard Rings. Technical InformationMateri al: SteelStyle: Standard Notes: Allen Screws and wrench includedFits Winchester Model 70 Serial #66,350 & Above
More

Talley 2-Piece Scope Base...

$28.99
MidwayUSA Talley 2-Piece Scope Base Winchester 52 Matte
+ $4.99 shipping
/talley-2piece-scope-base/dRfE-XMs52Q8_fkXOYF99Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Machined from solid bar stock, these blued double recoil shoulder designed bases hold your scope with absolute rigidity under severe recoil. These bases require the use of Tally rings. Other brands will not work.Technical InformationMateri al: Steel Style: Quick Detach Fits: Winchester Model 52 Notes: Mounting hardware included. .175 high
More

Browning AB3 Integrated Scope...

$52.71
Walmart.com Browning AB3 Integrated Scope Mount System 30mm Ring Diameter, High Ring Height
Free Shipping
/browning-ab3-integrated/D8nZQ9DBbWf73qi02anN1Q==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Browning AB3 Integrated Scope Mount System 30mm Ring Diameter, High Ring Height:Machined from 7000 series aluminum30mm ring diameter High height
More

Leupold 2-Piece Quick-Release...

$59.99
MidwayUSA Leupold 2-Piece Quick-Release Scope Base Winchester 70 Express Post-64 Matte
Free Shipping
/leupold-2piece/Coxj1QDBMpEBvwfBRBbKfg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
With Leupold Quick Release steel bases you can mount a scope, zero it, remove it, reattach it and remain nearly dead-on with your original point of impact. The key is precise machining of the patented lever mechanism. Turning the lever forward engages the base of the ring, pulling the ring down and forward, locking it into its zero position. Technical Information Base Style: Leupold Quick-Release Material: Steel Notes: Mounting Hardware Included Fits: Winchester 70 Express Pre '64 (.435 Rear mount hole spacing for .416 Remington, H&H models 300 and 375, 300 Winchester Magnum
More

Leupold 2-Piece Quick-Release...

$59.99
MidwayUSA Leupold 2-Piece Quick-Release Scope Base Winchester 70 Express Pre-64 Matte
Free Shipping
/leupold-2piece/SLlm_w4IrG4AsOA3WmdHHg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
With Leupold Quick Release steel bases you can mount a scope, zero it, remove it, reattach it and remain nearly dead-on with your original point of impact. The key is precise machining of the patented lever mechanism. Turning the lever forward engages the base of the ring, pulling the ring down and forward, locking it into its zero position. Technical Information Base Style: Leupold Quick-Release Material: Steel Notes: Mounting Hardware Included Fits: Winchester 70 Express Pre '64 (.435 Rear mount hole spacing for .416 Remington, H&H models 300 and 375, 300 Winchester Magnum
More

Leupold 2-Piece Standard...

$16.64
MidwayUSA Leupold 2-Piece Standard Scope Base Winchester 94 Angle-Eject Gloss
Free Shipping
/leupold-2piece-standard/fzJ5Tf4hCBR-rFREri_ONg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard 2-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. These steel bases will fit both right and left handed actions. Technical InformationMateri al: Steel Style: Standard Fits: Winchester Model 94 Angle Eject Notes: Torx screws and driver included.
More

Lsp High Standard Scope Mount...

$29.95
Brownells Lsp High Standard Scope Mount - Black Lsp Scope Mount
+ $7.95 shipping
/lsp-high-standard-scope/wQUuAJsRfqiwKEiOLnx-Sg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The scope and the barrel become one unit to effectively cancel small shifts in zero between the receiver and the barrel for increased accuracy. Thirteen cross-slots provide a wide range of mounting positions; cantilever design centers the weight over the grip for better balance. Cutaway over the receiver allows sufficient scope height for proper functioning and ejection. Fits all factory bull barrels; Weaver-style rings. Mfg: Lsp SPECS: Aluminum, matte finish, black, anodized. 5-1/4 (13.3cm) long. Fits LSP Match Barrels; factory bull barrels require drilling and tapping. Includes instructions and screws.
More

Weaver Converta Scope Mounts...

$29.99
Cabela's Weaver Converta Scope Mounts - Natural
Free Shipping
/weaver-converta-scope/USpbhcMLoT1vS4hUul6FOQ==/info
Cabela's
IN_STOCK ( In stock )
Free Shipping
Mount your scope, red-dot sight or other sighting system on your RemingtonMossberg shotgun with this Weaver mount. Engineered in a low-profile, form-fitting design, it enables you to acquire targets quickly from a natural shooting position without having to raise your head, as you would to peek through higher-mounted sighting systems. The multislotted rail accommodates a variety of popular sight systems. Constructed of a tough, lightweight polymer composite material. No gunsmithing required. Available: Remington fits 870, 1100, 11-87 shotguns in 12- or 20-gauge Mossberg fits 500 and 835 12-gauge. Color: Natural. Cameras & Optics > Camera & Optic Accessories > Optic Accessories > Weapon Scope & Sight Accessories
More

Talley 2-Piece Scope Base...

$28.99
MidwayUSA Talley 2-Piece Scope Base Winchester 70 (.330) Post-64 Long Action Magnum Matte
+ $4.99 shipping
/talley-2piece-scope-base/Vb3sVs2fOjRouihm7cDJxg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Machined from solid bar stock, these blued double recoil shoulder designed bases hold your scope with absolute rigidity under severe recoil. These bases require the use of Tally rings. Other brands will not work.Technical InformationMateri al: Steel Style: Quick Detach Fits: Winchester 70 (.330) Post 64 Long Action Magnum Notes: Mounting hardware included. .175 high
More

Talley 2-Piece Scope Base...

$44.99
MidwayUSA Talley 2-Piece Scope Base Winchester 70 (.860) Standard Caliber And Short Magnum Stainless Steel
+ $4.99 shipping
/talley-2piece-scope-base/xqRldrQV8TTHCSi9IoWKCA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Machined from solid bar stock, this stainless steel double recoil shoulder design base will hold the scope with absolute rigidity under severe recoil. This base requires the use of Tally rings. Other brands will not work. Technical InformationMateri al: Steel Style: Quick Detach Notes: Mounting hardware included. .175 high
More

Leupold 1-Piece Standard Long...

$29.99
MidwayUSA Leupold 1-Piece Standard Long Range Scope Base Winchester 70 Short Action Matte
Free Shipping
/leupold-1piece-standard/3BxlUFp71fhosOTXLt_XYA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Long Range 1-Piece mounts provide 1/4 degree of built-in elevation compensation for bullet drop at extreme ranges. Technical Information Base Type: Standard Material: Steel Notes: Mounting Hardware Included
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp17.xss-30388
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp17.xss-30388