Category

Sport and Outdoor
Showing results for "russian sks 7.62x39"
Results 1 - 40 of 1500+

ProMag High Capacity...

$22.99
Bass Pro Shops ProMag High Capacity Magazines for SKS 7.62x39mm Rifles Gun Magazines & Clip 10228779
+ $4.95 shipping
/promag-high-capacity/kyZd5BRA9d_IVjqqVfS8pw==/info
Bass Pro Shops
IN_STOCK ( In stock )
High capacity magazines for SKS 7.62x39mm Rifle Made of durable, lightweight polymer Manufacturer's limited lifetime warranty Keep firing your high-performance SKS 7.62x39mm Rifle longer with High Capacity Magazines from Pro-Mag. With a reputation built on their dedication to manufacturing superior products for dependable performance, ProMag has become one of the leading makers of magazines in the world. Gun enthusiasts and law enforcement personnel continue to rely on ProMag to feed the ammo they need into the guns they carry. Made of lightweight polymer for durability and consistency. Manufacturer's limited lifetime warranty. Made in USA.
More

Sks 7.62x39 Magazines -...

$18.99
Brownells Sks 7.62x39 Magazines - 20-Round Sks Magazine
+ $7.95 shipping
/sks-762x39-magazines/AW2MH0V-dtkQtlupIF8JPg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Rugged, molded-polymer magazine ends the hassle of loading your SKS from old-fashioned stripper clips and gives you the convenience, speed, and extra capacity of a modern detachable box magazine. Not a modified AK-47 mag but an all-new design specifically developed for reliable function in the SKS, available in 10- and 20-round capacities. To use it, simply remove your rifle's internal magazine and hinged floorplate; they can be reinstalled to return to original configuration. Some rifles, including those with the original wood stock, will also require slight enlargement of the magazine opening. One-piece body of corrosion-proof, reinforced polymer is self-lubricating to ensure smooth, Mfg: Tapco Weapons Accessories SPECS: Molded polymer, black. Approximately 7 (17.8cm) high, 27/8 (7.3cm)... Less
More

Hornady Custom 7.62x39mm 123...

$32.49
Sportsman's Guide Hornady Custom 7.62x39mm 123 Grain SST 50 rounds
+ $8.99 shipping
/hornady-custom-762x39mm/CFeveX3iEustC5wFexiqcA==/info
Sportsman's Guide
IN_STOCK ( In stock )
Hornady Interlock Rifle Ammo. Interlock Ammunition - loaded with Interlock bullets, outperforms ammo the average hand-loader produces. Caliber: 7.62x39mm AmmoBullet Wt. Grains: 123Bullet Style: SSTMuzzle Velocity (F.P.S.): 2,350Muzzle Energy (ft.-lbs.): 1,251Rounds Per Box: 50SST = Super Shock Tipped. Item is made with polymer coated steel. Gender: Unisex.
More

RCBS 3-Die Set 7.62mm Russian...

$168.99
MidwayUSA RCBS 3-Die Set 7.62mm Russian Nagant (7.62x38mmR)
+ $7.19 shipping
/rcbs-3die-set-762mm/sZpTajQpA5sEgpHlb_KFOQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 3-Die Set has a sizer die with decapping unit, an expander die and a seater die with crimp. Cases must be lubed prior to sizing. Shellholder sold separately. Technical InformationMateri al: Polished and Heat Treated Steel Die Types Included: Sizer Die (with decapping unit) Expander Die (for expanding and belling case mouth) Seater Die (with roll crimp) Accessories: Plastic Storage Case Notes: Does not feature a carbide sizing ring (cases must be lubed prior to sizing) Lifetime Guarantee from RCBS Shellholder not included.
More

Sks 7.62x39 Magazines -...

$23.99
Brownells Sks 7.62x39 Magazines - 10-Round Detachable Sks Magazine
+ $7.95 shipping
/sks-762x39-magazines/bkJZ2rwDpPZxqfyOtPzKvw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Rugged, molded-polymer magazine ends the hassle of loading your SKS from old-fashioned stripper clips and gives you the convenience, speed, and extra capacity of a modern detachable box magazine. Not a modified AK-47 mag but an all-new design specifically developed for reliable function in the SKS, available in 10- and 20-round capacities. To use it, simply remove your rifle's internal magazine and hinged floorplate; they can be reinstalled to return to original configuration. Some rifles, including those with the original wood stock, will also require slight enlargement of the magazine opening. One-piece body of corrosion-proof, reinforced polymer is self-lubricating to ensure smooth, Mfg: Tapco Weapons Accessories SPECS: Molded polymer, black. Approximately 7 (17.8cm) high, 27/8 (7.3cm)... Less
More

Clymer Headspace Gauges - Go...

$29.00
Brownells Clymer Headspace Gauges - Go - Go, 7.62x39 Russian Rimless
+ $7.95 shipping
/clymer-headspace-gauges/pmAYn7kKnWzPy9-ueEuqzA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
More

PTG Solid Pilot Chamber...

$103.99
MidwayUSA PTG Solid Pilot Chamber Finish Reamer 7.62x54mm Rimmed Russian (7.62x53mm Rimmed)
+ $4.99 shipping
/ptg-solid-pilot-chamber/dg5m0J2jYtcUssSUYmirvg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These reamers are produced from premium M-42 tool steel and are individually hand-stoned to cut smooth and chatter free. Made to SAAMI Specifications for standardized cartridges and to the current industry standard for popular wildcat cartridges. They feature a solid pilot and a 3/8 square drive shank for use with a tap wrench. Right hand cut.
More

Clymer Headspace Gauges -...

$29.00
Brownells Clymer Headspace Gauges - No-Go - No Go, 7.62x39 Russian Rimless
+ $7.95 shipping
/clymer-headspace-gauges/TrGAqV9wmGQlFE5wBOxqQA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with Go or No-Go and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs. Mfg: Clymer SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30/30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30/06 Cartridges are .25-06, 6.5mm-06, .270 Win, .30-06, 8mm-
More

ProMag AK-47 7.62X39MM 73rd...

$79.90
Walmart.com ProMag AK-47 7.62X39MM 73rd DRUM Mag Black Poly AK-A16
Free Shipping
/promag-ak47-762x39mm/mIqrzt7iHGFD2odS_MofwQ==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Not Available to Residents or Walmart Stores in New York state This drum magazine holds 73-rds of 7.62x39mm ammunition providing serious firepower for your AK-47, MAK 90 and many other 7.62x39mm AK variants. Constructed of a high impact Dupont Zytel based polymer with an over molded steel feed lip insert for added strength. Integral tensioner allows magazine to be stored loaded for extended periods while ensuring maximum reliability. Hinged back design allows easy access for loading, cleaning and inspection.
More

Anderson 16 inch 7.62x39...

$549.99
Sportsman's Guide Anderson 16 inch 7.62x39 Complete Upper
+ $19.99 shipping
/anderson-16-inch-762x39/jaqFaMckcjvtN7q6HsZKCg==/info
Sportsman's Guide
IN_STOCK ( In stock )
Anderson 16 7.62x39 Complete Upper. AM-66-FF MGSL 16-8.75 free-float barrelForged Upper receiverKnight Stalker Flash HiderLow Pro gas block1 long, 1 short rail1:10 twist. Gender: Unisex.
More

Redding Deluxe 3-Die Set...

$105.99
MidwayUSA Redding Deluxe 3-Die Set 7.62x39mm
+ $7.19 shipping
/redding-deluxe-3die-set/SPqbB8Xw2aOllgOByLqk3w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding 3-Die Sets are available for rifle and pistol cartridges. The pistol sets contain a full length sizing die, expander die, and bullet seating die. The rifle sets contain a full length sizing die, neck sizing die, and a bullet seating die. The full length sizing die features a decapping rod assembly with neck expander. The expander die includes a neck expanding plug and the seating die features a built-in crimping ring and seating plug. This combination is sure to produce consistent, reliable ammunition time and time again. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping unit) Expander Die for Pistol Sets and Neck Sizing Die for Rifle Sets Profile or Taper Crimp Seater Die (with built in... Less
More

Sks 7.62 X 39mm Do Everything...

$8.50
eBay Sks 7.62 X 39mm Do Everything Manual, Book
+ $1.99 shipping
/sks-762-x-39mm-do/d0GpqL1f3wl5bUASsr1WOQ==/info
eBay
IN_STOCK ( In stock )
SKS 7.62 x 39mm Do Everything Manual SKS 7.62 x 39mm Do Everything Manual This manual covers: Specifications Cartridge Loading Tool Kit Use Receiver Nomenclature Receiver Disassembly Trigger Group Nomenclature Trigger Group Disassembly Safety Check and Storage This manual is published by JEM Enterprises.The original publisher of the manual was M M Engineering.The book was written by Michael A. Pugliese of M M Engineering, a famous author who has been writing manuals on proper gun care and maint
More

Lee Steel 3-Die Set 7.62...

$35.99
MidwayUSA Lee Steel 3-Die Set 7.62 Russian Nagant (7.62x38mmR) Revolver (Forming from 32-20 Brass)
+ $7.59 shipping
/lee-steel-3die-set-762/tC4h3iXJFtB2h2b0DsfrpQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Steel Die Sets have features identical to the Lee Carbide 3-Die Set except the case MUST be lubricated for sizing. Sizer Die, Powder Through Expander Die, Bullet Seater Die, Shellholder, Powder Measure and storage case included. Bullet seater die features and adjustable taper to roll crimp. Special Note: The Lee Nagant die set has the sizer die marked 7.62 Nagant and the other two dies are marked 32-20 This die set does not come with load data or any other cartridge information. For best results you need to slug your Nagant barrel to determine the bullet diameter needed. .311 - .314 diameter bullets work best. Starline 32-20 brass is likely to work without any alteration. Other brand 32-20 brass will require rim thinning or modification of the recoil plate. Load data (one load) is... Less
More

SKS X-Blade Rear Fender One...

$26.99
Backcountry.com SKS X-Blade Rear Fender One Color, 28in/29in
+ $7.44 shipping
/sks-xblade-rear-fender/70d8oYfxua1Fp9adbshxFw==/info
Backcountry.com
IN_STOCK ( In stock )
For folks who want a simple rear fender for occasional use, the SKS X-Blade Rear Fender is what you're looking for. It clamps around your seatpost, and it pivots both at the post and at the interface between the clamp and the fender itself. This dual-pivot design allows you to customize the exact position of the fender over your rear wheel for any size road bike. Ideal for riding in areas where the roads are wet in the morning (we think of misty San Francisco), but it's not actually rainy out. Total weight with hardware is 205g, and it comes in Black only. One other note: we recommend pairing the X-Blade with the X-Board to get a similar level of protection from the spray of your front wheel.
More

Sks 7.62x39 Steel Stripper...

$42.99
eBay Sks 7.62x39 Steel Stripper Clips 100 Pack Lot Holds 10 Rounds Each
Free Shipping
/sks-762x39-steel/dcgJrTJUMh8ZfpxZ_Ik3cA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
SKS 7.62x39 Steel Stripper Clips 100 Pack Lot Holds 10 Rounds Each The Same Day EXPEDITED Shipping with Tracking ID!!Excellent Customer Service Guaranteed!! BRAND NEW! TOP QUALITY! THE BEST PRICE! Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge The SKS Stripper Clip is made to load 10 rounds into your SKS Rifle. Instead of loading one round at a time, you mount the stripper clip onto the chamber and push the rounds inside for easy quick loading of the 7.62x39mm round into you
More

ProMag Sks Magazines

$24.99
Cabela's ProMag Sks Magazines
+ $5.95 shipping
/promag-sks-magazines/YOC1Jbjm3a9P4UrWAaYmDA==/info
Cabela's
IN_STOCK ( In stock )
The ProMag SKS Magazines are designed for SKS rifles and carbines. The magazine body and follower are constructed of a proprietary DuPont Zytel-based polymer to ensure long service life. Springs are made from heat-treated chrome-silicon wire for increased reliability and smooth feeding. Made in USA. Available: SKS-A3 40-round magazine. SKS-A4 30-round magazine. Sports and Outdoors > Sport and Outdoor
More

Redding 2-Die Set 7.62x54mm...

$64.99
MidwayUSA Redding 2-Die Set 7.62x54mm Rimmed Russian
+ $7.19 shipping
/redding-2die-set/Fd1LOopJzuNBlkvQcpkNPA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Mini-30 7.62x39 Magazines -...

$34.99
Brownells Mini-30 7.62x39 Magazines - Mini-Thirty 20-Rd Magazine
+ $7.95 shipping
/mini30-762x39-magazines/ksO9-5BjLoPFgCeDY8bP_g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Mfg: Ruger
More

Sks / 7.62x39mm Adjustable...

$7.90
eBay Sks / 7.62x39mm Adjustable Front Sight Tool
Free Shipping
/sks-762x39mm/8DoDLncOf06lhGdMMGPHJw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
NEW SKS / 7.62X39MM Adjustable Front Sight Tool Click to Enlarge This offering is for 1 of our 7.62x39 SKS Sight Adjustment Tools . Steel construction and made to adjust the front sight for windage and elevation. The screw and base used for left right adjustment and the T handled is slotted for the up and down front sight post adjustments. Made to be an 7.62X39MM tool but works on most SKS as well. Payment details: PayPal Preferred. Shipping details: Item ships within 24 business hours after pa
More

Ak-47 7.62x39 Standard...

$21.99
Brownells Ak-47 7.62x39 Standard Receiver Flat - Ak-47 Fixed Stock Flat, W/T-Holes
+ $7.95 shipping
/ak47-762x39-standard/uPCFFI8RfMRzri8feImf4w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
STANDARD AK-47 7.62x39 For building a standard, fixed-stock AK-47/AKM in 7.62x39. Use with the Romanian and most common variant kits. 1/8 alignment pin holes are pre-drilled. Available with or without front and rear trunnion holes pre-punched. Precision-cut, ready-to-bend steel flats save time and frustration when building a custom AK. No more trying to salvage a beat-up receiver from a donor gun. These flats are stamped from the correct 1mm thick sheet steel, with top rails pre-bent, stepped, and trimmed on CNC equipment. Hammer and trigger holes are slightly undersized, ready for precise final reaming after bending; use 7mm and 5mm chucking reamers. All f Mfg: Ak Builder SPECS: Annealed 4130 steel, in-the-white. 1mm (.040) thick. Includes instructions.
More

SKS X-Blade Rear Fender One...

$28.99
Backcountry.com SKS X-Blade Rear Fender One Color, 26in/27.5in
+ $7.44 shipping
/sks-xblade-rear-fender/Gz2pXp0vT1bL2yqFKpdNBA==/info
Backcountry.com
IN_STOCK ( In stock )
For folks who want a simple rear fender for occasional use, the SKS X-Blade Rear Fender is what you're looking for. It clamps around your seatpost, and it pivots both at the post and at the interface between the clamp and the fender itself. This dual-pivot design allows you to customize the exact position of the fender over your rear wheel for any size road bike. Ideal for riding in areas where the roads are wet in the morning (we think of misty San Francisco), but it's not actually rainy out. Total weight with hardware is 205g, and it comes in Black only. One other note: we recommend pairing the X-Blade with the X-Board to get a similar level of protection from the spray of your front wheel.
More

RCBS Trim Die 7.62x54mm...

$35.99
MidwayUSA RCBS Trim Die 7.62x54mm Rimmed Russian
+ $3.99 shipping
/rcbs-trim-die-762x54mm/dMDx5v66YEWPS8hZGsQrvw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Doubling as a case length gage, this die will quickly allow the reloader to see if the case is too long. If the case is too long, the case will stick out above the top of the die. To get the case to the correct size, file the case down until it's flush with the top of the die. The Trim Die has been case hardened, hand polish and heat treated to withstand a file bearing against the top surface without causing damage to the die. Shellholder sold separately. Technical InformationMateri al: Heat-Treated Steel Die Type Included: Trim Die Accessories: Plastic storage case Notes: Standard 7/8-14 thread. The trim die doubles as a visual case length gauge. Run a case into the trim die and if the case stck out above the top of the die, it's too long. File the case down until it is flush with the... Less
More

Ak-47 7.62x39 Standard...

$19.99
Brownells Ak-47 7.62x39 Standard Receiver Flat - Ak-47 Fixed Stock Flat, W/O T-Holes
+ $7.95 shipping
/ak47-762x39-standard/8FBVBEtujt35VKN-XeCxUg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
STANDARD AK-47 7.62x39 For building a standard, fixed-stock AK-47/AKM in 7.62x39. Use with the Romanian and most common variant kits. 1/8 alignment pin holes are pre-drilled. Available with or without front and rear trunnion holes pre-punched. Precision-cut, ready-to-bend steel flats save time and frustration when building a custom AK. No more trying to salvage a beat-up receiver from a donor gun. These flats are stamped from the correct 1mm thick sheet steel, with top rails pre-bent, stepped, and trimmed on CNC equipment. Hammer and trigger holes are slightly undersized, ready for precise final reaming after bending; use 7mm and 5mm chucking reamers. All f Mfg: Ak Builder SPECS: Annealed 4130 steel, in-the-white. 1mm (.040) thick. Includes instructions.
More

RCBS 2-Die Set 7.62x54mm...

$35.49
MidwayUSA RCBS 2-Die Set 7.62x54mm Rimmed Russian (7.62x53mm Rimmed)
+ $7.19 shipping
/rcbs-2die-set-762x54mm/l6afVCCfcBFEEOQD3y8HgA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Full Length Sizer Die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The Seater Die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS Includes 311 diameter expander button, 308 diameter expander button available from RCBS.
More

Laser Boresighter - 7.62x39...

$30.00
Brownells Laser Boresighter - 7.62x39 Laser Boresighter
+ $7.95 shipping
/laser-boresighter/GWYGb8XX2HwcFTdIIQMc0Q==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Easy-to-use, self-contained boresighting system fits in the chamber of your rifle or pistol and projects a powerful red laser beam aligned with the bore axis for sighting to the point-of-aim without firing a shot. Works with scopes, holographic red dot sights, and iron sights. Durable, machined brass housing looks like a cartridge case but actually contains the entire laser system and batteries. Insert the batteries and screw the cap on the housing to turn on the laser; remove the batteries to turn off. Insert the entire assembly into the chamber, gently close the action, and aim at a target 20-30 yards away. Adjust windage and elevation of the scope or sights so point-of-ai Mfg: Sightmark SPECS: Machined brass. Laser wavelength, 632-650 nm. Sighting range, 15-100 yards. Dot size, 2 at... Less
More

Lyman 2-Die Set 7.62x39mm

$36.49
MidwayUSA Lyman 2-Die Set 7.62x39mm
+ $7.19 shipping
/lyman-2die-set-762x39mm/nDbz-fRVtq66aiunD_Xjbw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lyman is one of the most recognized names in reloading, producing innovative tools for serious shooters and reloaders. Offering products that get the job done while still offering value and advancing technology. Lyman uses its years of experience and user feedback to offer the best performing reloading tools available. Lyman Precision Die Sets are crafted on state of the art computer controlled equipment insuring that each die is perfectly dimensioned. Each rifle sizing die is vented to prevent trapped air that can damage cartridge cases, polished, heat treated for toughness and then receives a final micro-finish polish for extra smoothness. Lyman 2 die rifle sets are perfect for loading jacketed bullets in bottleneck cases. Includes full length sizing die and bullet seating die with a... Less
More

Barska 4X32 Contour Sks Scope...

$75.58
Sears Barska 4X32 Contour Sks Scope AC10882
+ $6.95 shipping
/barska-4x32-contour-sks/ryVpBc5RDqPFKwGdXj2Deg==/info
Sears
IN_STOCK ( In stock )
The Barska 4x32 Contour SKS Scope meets the hunter s demands by combining performance and innovation in a compact riflescope without sacrificing ruggedness, dependability and craftsmanship. Contour scopes offer low Magnification: combined with long eye relief: making them ideal for close range action from cross-bow hunting to pistol shooting even down to simple rimfire action. Contours are engineered with extra rigid shockproof construction to handle the demands of pistols, shotguns and other types of firearms. Calibrated with relatively low parallax settings and compact in size, this series is a clear winner for various types of shooters and hunters in the field. Includes SKS mount, mounting rings, scope caps, and lens cloth.
More

Promag Sks 7.62x39mm Magazine...

$17.09
eBay Promag Sks 7.62x39mm Magazine Sks 02
Free Shipping
/promag-sks-762x39mm/FazpLO7-pWfw52Wo2K6iAw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Scopes Optics flashlights lasers reloading hunting contact us ProMag SKS 7.62x39mm (5)Rd Black Polymer Magazine.The SKS 02 is a 5-rd magazine designed for SKS rifles and carbines. The magazine body and follower are constructed of a proprietary DuPont? Zytel? based polymer to ensure a long service life. The springs are made from heat treated Chrome-silicon wire for increased reliability and smooth feeding. Made in the U.S.A.NOTICE: Due to the variability in mag-well dimensions in the wide variet
More

Go/No-Go Gauge Sets - 7.62x39...

$58.00
Brownells Go/No-Go Gauge Sets - 7.62x39 Headspace Gauge Kit
+ $7.95 shipping
/gonogo-gauge-sets/_dYokF-tTwFp5CxeSWL6Gw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Convenient kits contain œGo and œNo-Go gauges for accurately checking chamber length to make sure it meets SAAMI specs. These gauges are essential tools for ensuring a tight, accurate, safe chamber when chambering a new barrel. Always have a set on hand to check for correct headspace before buying or firing a new gun. Comes in a handy, durable plastic carrying case. Mfg: Clymer SPECS: Steel, precision machined to SAAMI specs. Each set contains one go gauge and one no-go gauge in a single caliber as listed below.
More

Lee Pacesetter 3-Die Set...

$30.99
MidwayUSA Lee Pacesetter 3-Die Set 7.62x54mm Rimmed Russian (7.62x53mm Rimmed)
+ $7.59 shipping
/lee-pacesetter-3die-set/lRVRFtG3Axkt8Dhv2IEf8A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Each Lee Pacesetter 3-Die Set includes the exclusive Lee Factory Crimp Die, Full Length Sizer Die and Bullet Seater Die. Each set is made from steel and includes the appropriate Shellholder, Powder Measure, load data, plastic storage box and a two year warranty. Adjustable crimp from slight taper to full roll. Includes 308 diameter expander button, 311 diameter expander button available from Lee. Technical Information Note from the Manufacturer: Lee Precision includes the expander appropriate for a .308 diameter bullet. Nearly everyone that reloads the 7.62x54 /7.62x53 uses the .308 diameter bullet. The availability and selection of .308 bullets are far greater than .311. In military issue ammo they used a .309 to .311 diameter bullet. The smaller expander is included as standard issue as... Less
More

SKS X-Blade II Rear Fender...

$26.95
Backcountry.com SKS X-Blade II Rear Fender Black, 26in/27.5in
+ $7.44 shipping
/sks-xblade-ii-rear/-JXBQ2Sheq9gosb27pNHNA==/info
Backcountry.com
IN_STOCK ( In stock )
Not everyone is fortunate enough to live in a place with sunny skies and dry trails year round. So for those of you living in damper climes, the SKS X-Blade II Rear Fender is an excellent option for keeping your backside dry when you're hitting the trails. It's proven to stay put, even on rough terrain, and it's a breeze to take on and off, so you won't have to lug it around when the sun makes an appearance. Thanks to a simple seatpost mount, removing and installing the X-Blade doesn't take more than a couple of seconds. It's curved to match the profile of a 26- or 27. 5-inch wheel, and you'll want to run it within a few inches of the tire for maximum protection. For full suspension bikes, keep in mind that the fender won't be stationary relative to the rear wheel, so place it higher to... Less
More

40 Pcs, Sks 7.62x39 Steel...

$19.98
eBay 40 Pcs, Sks 7.62x39 Steel Stripper Clips - Brand In Box
Free Shipping
/40-pcs-sks-762x39-steel/gssIm-hjz5ul0j91Q1G_DA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
40 pcs, SKS 7.62x39 Steel Stripper Clips - Brand New in Box Click to Enlarge Click to Enlarge Click to Enlarge SKS 7.62x39 Steel Stripper Clips -Lot of 40 pcs Specifications: One clip holds 10 rounds Holds 7.62 X 39mm rounds into your SKS Rifles. Steel Construction WE ACCEPT PAYPAL. WE DO COMBINE SHIPPING ON MULTIPLE PURCHASES FROM THE SAME DAY, JUST MESSAGE US FOR UPDATE INVOICE WITH NEW SHIPPING COST. WE SHIP ITEM SAME DAY OR NEXT DAY ONCE THE PAYMENT CLEARS. (EXCEPT WEEKENDS AND HOLIDAYS) We
More

PTG Interchangeable Pilot...

$134.99
MidwayUSA PTG Interchangeable Pilot Chamber Finish Reamer 7.62x39mm
+ $4.99 shipping
/ptg-interchangeable-pilot/OgJeZAjnt0sz5dKMRlFwJg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
PTG Removable Pilot Chamber Finish Reamers are machined from premium M-42 Tool Steel. They are individually hand-stoned to cut smooth and chatter free. Made to SAAMI specifications for standardized cartridges and to the current industry standard for popular wildcat cartridges. They feature removable pilots that are held in place with a screw and a 3/8 square drive shank for use with a tap wrench. Reamers include one bushing of nominal bore diameter (additional bushings sold separately). Right hand cut.
More

Tapco SKS Stock System with...

$72.09
Walmart.com Tapco SKS Stock System with Bottom Rail
Free Shipping
/tapco-sks-stock-system/ZR7ueKhLH7ZJo9hb3GkWIA==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Tapco's Intrafuse Rifle System replaces all original stock components. Constructed from a high-strength composite material, it is made to last for years to come. Featuring a saw-style pistol grip, the Tapco Gun Stock is easy and comfortable to control. For a versatile fit on a variety of SKS models, it has six adjustable positions. Equipped with an upper handguard rail and a lower picatinny rail, this SKS Gun Stock has ample space to add additional accessories.
More

Redding Shellholder #15...

$10.49
MidwayUSA Redding Shellholder #15 (7.62x54mm Rimmed Russian, 500 S&W Magnum)
+ $3.99 shipping
/redding-shellholder-15/WcvuIruI5yUR4yw6fAhjuw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These quality steel shellholders firmly hold a case in place for all reloading operations. Redding shellholders fit most single stage and turret reloading presses. Technical Information Material:Steel Fits:7.62x54 Rimmed Russian and 500 S&W Mag
More

PTG Solid Pilot Chamber...

$103.99
MidwayUSA PTG Solid Pilot Chamber Finish Reamer 7.62x39mm (Throat Diameter .308)
+ $4.99 shipping
/ptg-solid-pilot-chamber/zFGyZkIAp1Jfb0a0JFqrfQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These reamers are produced from premium M-42 tool steel and are individually hand-stoned to cut smooth and chatter free. Made to SAAMI Specifications for standardized cartridges and to the current industry standard for popular wildcat cartridges. They feature a solid pilot and a 3/8 square drive shank for use with a tap wrench. Right hand cut.
More

SKS Mud-X Downtube Fender...

$6.95
Backcountry.com SKS Mud-X Downtube Fender Black, One Size
+ $7.44 shipping
/sks-mudx-downtube-fender/LX3mTEO-wAnNitEmjZLRJw==/info
Backcountry.com
IN_STOCK ( In stock )
The SKS Mud-X Downtube Fender is a simple, old-skool fender that is as simple as it is effective. It's curved plastic, with a channel on the back for a bike's down tube, two rubber ties, and a foam pad. The plastic keeps the mud at bay, the channel makes the fender easy to fit to the downtube, the ties hold it in place and the foam pad both prevents scratching the frame and twisting the fender. Color is Black. Weight is 90g.
More

RCBS Trim Die 7.62x39mm

$35.99
MidwayUSA RCBS Trim Die 7.62x39mm
+ $3.99 shipping
/rcbs-trim-die-762x39mm/YYjrk-QtiI9xDi4fCm4NnQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Doubling as a case length gage, this die will quickly allow the reloader to see if the case is too long. If the case is too long, the case will stick out above the top of the die. To get the case to the correct size, file the case down until it's flush with the top of the die. The Trim Die has been case hardened, hand polish and heat treated to withstand a file bearing against the top surface without causing damage to the die. Shellholder sold separately. Technical InformationMateri al: Heat-Treated Steel Die Type Included: Trim Die Accessories: Plastic storage case Notes: Standard 7/8-14 thread. The trim die doubles as a visual case length gauge. Run a case into the trim die and if the case stck out above the top of the die, it's too long. File the case down until it is flush with the... Less
More

RCBS Full Length Sizer Die...

$30.99
MidwayUSA RCBS Full Length Sizer Die 7.62x54mm Rimmed Russian
+ $3.99 shipping
/rcbs-full-length-sizer/okdOM3f9K4r6FkJBFayCZA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Full Length Sizer Dies for bottle neck cases have vents to prevent case damage caused by trapped air and to release excessive lubricants. Headspace is held to minimum tolerances to avoid changing the case body length during full-length sizing.Technical InformationMateri al: Steel Die Type Included: Sizer Die (With Decapping Unit) Accessories: Plastic storage case Notes: Resizes the full length of the case.
More

SKS Airchecker Digital...

$25.00
Competitive Cyclist SKS Airchecker Digital Gauge/Pressure Regulator
+ $8.95 shipping
/sks-airchecker-digital/IqZteSYnlio9liNPFxwtLw==/info
Competitive Cyclist
IN_STOCK ( In stock )
Store not rated
The SKS Airchecker Digital Display Pressure Gauge is a far cry from a squeeze and a seems good enough as you roll towards the door for a long training ride. In the same amount of time that you can wonder what your tire pressure is at, you can check it and know. SKS uses modern technology to make this happen. The Airchecker has a lit digital readout that gives you a reading in PSI or BAR. Simply push the 180 degree swiveling head onto the valve stem and you'll get an instantaneous reading that remains displayed on the screen after you remove the checker. It runs off of a standard CR-2032 battery. The SKS Airchecker Digital Display Pressure Gauge works with Presta and Shrader valves.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355