Showing results for "ruger mini 14 parts"
Results 1 - 40 of 1500+

Ranch Scope Base Ruger...

$53.99
MidwayUSA Ranch Scope Base Ruger Mini-14 Black Oxide
+ $4.99 shipping
/ranch-scope-base-ruger/oqHPwcEC4s3Zn3VvI_Uzbg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
No drilling or tapping is necessary as the steel base clamps directly to the barrel. See-through design allows you to use your iron sights even with a scope installed. Please note that this base was designed for use with the stock Ruger barrel only, it will not work with heavy aftermarket barrels. Technical InformationMateri al: Steel Style: Weaver Fits: Ruger Mini-14 Notes: See through design allows use of open sights. Clamps on to the barrel. Hex wrench included. Stock barrel only. Will not work with aftermarket heavy barrels. Install by removing the top section of the gas block. It is held on with 4 cap screws. Install the scope base with the rail section facing to the rear and attach it to the bottom section of the gas block with the 4 cap screws. This is a scout-type scope base,... Less
More

Ranch Scope Base Ruger...

$53.99
MidwayUSA Ranch Scope Base Ruger Mini-14 Black Oxide
+ $4.99 shipping
/ranch-scope-base-ruger/oqHPwcEC4s3Zn3VvI_Uzbg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
No drilling or tapping is necessary as the steel base clamps directly to the barrel. See-through design allows you to use your iron sights even with a scope installed. Please note that this base was designed for use with the stock Ruger barrel only, it will not work with heavy aftermarket barrels. Technical InformationMateri al: Steel Style: Weaver Fits: Ruger Mini-14 Notes: See through design allows use of open sights. Clamps on to the barrel. Hex wrench included. Stock barrel only. Will not work with aftermarket heavy barrels. Install by removing the top section of the gas block. It is held on with 4 cap screws. Install the scope base with the rail section facing to the rear and attach it to the bottom section of the gas block with the 4 cap screws. This is a scout-type scope base,... Less
More

Insta-Mount Scope Mounts -...

$63.99
Brownells Insta-Mount Scope Mounts - Ruger Mini-14 181 & Up Series (Weaver)
+ $7.95 shipping
/instamount-scope-mounts/S4M4pQ6ZOSH5mF9SwgfZ7g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The BEST WAY to mount a scope on your ex-military rifle. WHY? No major alteration to your valuable firearm No drilling or tapping of the ultra hard receiver Do the work yourself Handsome ruggedness Guaranteed to hold zero Unmatched versatility Can be removed and/or reinstalled easily S&K Insta-Mounts are available in both S&K style (which include 1 Low Matte Rings) and Weaver rings style (Rings not included, base only). Mfg: S&K
More

Ruger 1 Extended Front Ring...

$34.99
MidwayUSA Ruger 1 Extended Front Ring Mount 4KO Silver Medium
+ $4.99 shipping
/ruger-1-extended-front/enFhcySMTRuWdA4vbulUvQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Weigand 1-Piece Weaver-Style...

$54.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger Mini-14, Mini-30, PC-9, PC-40, Deerfield with Integral Mounts Silver
+ $4.99 shipping
/weigand-1piece/fnE_OkVeBUBEgHyIH8zZWQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weigand Bases are constructed of durable, lightweight aluminum. These versatile bases easily allow your handgun or rifle to be equipped with optical sights. Accepts all Weaver-Style rings and accessories. Gunsmithing may be required. Won't fit older models without integral mounts.Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Ruger Mini 14 , Deerfield, Mini 30, PC-40, PC-9 (Only fits these models with integral mounts) Notes: Mounting Hardware Included
More

Ruger 1 Ring Mount 3BHM Matte...

$36.99
MidwayUSA Ruger 1 Ring Mount 3BHM Matte Low
+ $4.99 shipping
/ruger-1-ring-mount-3bhm/EvGHvSj85exJ0JLQfWG6Wg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube) Notes: This is one ring only.
More

Power Custom 1-Piece...

$22.60
MidwayUSA Power Custom 1-Piece Weaver-Style Base Ruger Mark II Silver
+ $4.99 shipping
/power-custom-1piece/DAgJ-suaJ-XYr4cIkQvrfQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Power Custom base fits factory drilled and tapped Ruger Mark 2 handguns. It is contoured and fits flush with the receiver. Weaver-style cross-slots allow better control of the position of the scope. Technical InformationMateri al: Aluminum Style: Weaver Fits: Ruger Mark II Notes: Multiple Slots to Allow for Precise Positioning of Rings Mounting hardware included. Color: Silver
More

Ruger 1 Ring Mount 3KHM...

$34.99
MidwayUSA Ruger 1 Ring Mount 3KHM Silver Matte Low
+ $4.99 shipping
/ruger-1-ring-mount-3khm/M0TgnomY8DIy7LcxANBbkQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube)
More

Ruger Mini-14 Recoil & Hammer...

$11.99
Brownells Ruger Mini-14 Recoil & Hammer Spring - Mini-14 Recoil Spring
+ $7.95 shipping
/ruger-mini14-recoil/o4033qJPmLnHp8yy2msW_w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Extra-power springs fit Mini-14, -30, Ranch Rifle. Decreases lock time, improves reliability. Recoil spring fits guns with first three digits of serial number 181 and higher. Mfg: Wolff
More

Weigand 1-Piece Weaver-Style...

$54.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger Mini-14, Mini-30, PC-9, PC-40, Deerfield with Integral Mounts Matte
+ $4.99 shipping
/weigand-1piece/wCdPg2VcIE3QBHziDjQLYA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weigand Bases are constructed of durable, lightweight aluminum. These versatile bases easily allow your handgun or rifle to be equipped with optical sights. Accepts all Weaver-Style rings and accessories. Gunsmithing may be required. Won't fit older models without integral mounts.Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Ruger Mini 14 , Deerfield, Mini 30, PC-40, PC-9 (Only fits these models with integral mounts) Notes: Mounting Hardware Included
More

Power Custom Action Wrench...

$39.99
MidwayUSA Power Custom Action Wrench Insert Ruger Mini 14
+ $4.99 shipping
/power-custom-action/I5dWk2fpOYhBs_yDuGPtQg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Power Custom Action Wrench Insert works with the action wrench handle to add in removing your barrel. It is fully CNC'd from billet aluminum.
More

Weigand 1-Piece...

$54.99
MidwayUSA Weigand 1-Piece Picatinny-Style Scope Base Ruger Mini-14, Mini-30, PC-9, PC-40, Deerfield with Integral Mounts Matte
+ $4.99 shipping
/weigand-1piece/Cn-BERGV3S0WW04GQku-Sw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These Weigand Bases are similar to Weaver-style bases but built with Picatinny spacing dimensions. Constructed of durable, lightweight aluminum, this WEIG-A-TINNY™ style rail lets you mount mini or short length scopes as well as Aimpoint red dots withough permanent modifications. The WEIG-A-TINNY™ accepts all Weaver-style rings and accessories and accepts Most Picatinny rings and accessories. Technical Information Style: 1-Piece Base Type: Weaver (cross-slot) Material: Aluminum Finish:Matte Notes: 5 Long Weighs 2.6 oz Mounting Hardware Included
More

B-Square Ruger to...

$69.99
MidwayUSA B-Square Ruger to Weaver-Style Adapter (Weaver-Style Scope Base Only) Ruger 96/44, 77/22, 77/44, 77/ML, Mini-14 Ranch, Mini-30 Silver
+ $4.99 shipping
/bsquare-ruger-to/L6QyZHwPhW_HoxPhcZ8Ang==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Bases are designed to adapt the original base system to allow mounting of Weaver-style rings. Technical InformationMateri al: Aluminum Style: Weaver Notes: Works with Weaver-Style rings Mounting Hardware Included Also fits the Ruger 580 Ranch which is the Mini-14 whose serial number starts with 580
More

Hiviz Ruger 22/45 Lite 6...

$26.60
Walmart.com Hiviz Ruger 22/45 Lite 6 Interchangeable Lite Pipes
+ $4.97 shipping
/hiviz-ruger-2245-lite-6/uItiBPuXlBpekcQ-yMl3og==/info
Walmart.com
IN_STOCK ( In stock )
This interchangeable front sight from HIVIZ fits Ruger 22/45 Lite Model and has adjustable rear sight. It comes with six LitePipes in various colors, carrying case and key to change LitePipes.
More

Ruger Rear Sight Adjustment...

$30.18
Walmart.com Ruger Rear Sight Adjustment Tool Mini 14
Free Shipping
/ruger-rear-sight/PEbcd6dqkCT1cQKJxcgqcQ==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
This item may be regulated for export by the U.S. Department of State or the U.S. Department of Commerce. Please see our Export Policy prior to placing your order.Rear sight adjustment tool for the Ruger Mini-14, blued and stainless.
More

Ruger 10/22 Picatinny Scope...

$33.99
Brownells Ruger 10/22 Picatinny Scope Mount - 15 Moa Scope Mount
+ $7.95 shipping
/ruger-1022-picatinny/Ksbr-yAdANYADUkwX2dzhw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Precision CNC machined from lightweight, 6061 T6 aluminum with MIL-STD 1913 Picatinny rail pattern allows mounting a variety of sights. Easily accommodates different-length scope bodies and provides generous adjustment for eye relief. Drilled to fit the factory hole spacing and includes mounting screws. Accepts both Picatinny and Weaver-style rings. Hardcoat anodized for durability. Available with 0 MOA base, or 15 MOA base to help maintain your scope's full elevation adjustment range when shooting at long range. Mfg: Tactical Solutions, Llc SPECS: 6061 T6 aluminum, hardcoat anodized, black, matte finish. 4-5/8 (11.7cm) long, 13/16 (2.1cm) wide, 11/32 (8.7mm) high from top of receiver.
More

Ruger 10/22 Picatinny Scope...

$36.99
Brownells Ruger 10/22 Picatinny Scope Mount - 0 Moa Scope Mount
+ $7.95 shipping
/ruger-1022-picatinny/oAdqDs286-jF_h049EVRRA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Precision CNC machined from lightweight, 6061 T6 aluminum with MIL-STD 1913 Picatinny rail pattern allows mounting a variety of sights. Easily accommodates different-length scope bodies and provides generous adjustment for eye relief. Drilled to fit the factory hole spacing and includes mounting screws. Accepts both Picatinny and Weaver-style rings. Hardcoat anodized for durability. Available with 0 MOA base, or 15 MOA base to help maintain your scope's full elevation adjustment range when shooting at long range. Mfg: Tactical Solutions, Llc SPECS: 6061 T6 aluminum, hardcoat anodized, black, matte finish. 4-5/8 (11.7cm) long, 13/16 (2.1cm) wide, 11/32 (8.7mm) high from top of receiver.
More

Ruger Padded Leather Cobra...

$34.99
Groupon Ruger Padded Leather Cobra Sling Dark Brown
Free Shipping
/ruger-padded-leather/2QmKKtMQxp73jHloWylnUg==/info
Groupon
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Ruger padded leather Cobra Sling with swivels is 2-1/4 inches wide. The rifle sling is made of genuine leather and is suede lined. This Ruger Cobra rifle sling is comfortable and looks great on a deer rifle. It is adjustable from 27-37. Features the iconic Ruger logo.
More

Power Custom Ruger 10/22...

$59.99
MidwayUSA Power Custom Ruger 10/22 Barrel Pusher
+ $4.99 shipping
/power-custom-ruger-1022/mCGMQc1dG94SGT9gui4wNg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Power Custom barrel pusher for the Ruger 10/22 series of rifles allows you to safely remove a stubborn barrel without marring the receiver or disturbing any mounted optics. This barrel pusher will work with 17 Mach2, 22 Long Rifle, 17 HMR, and 22 WMR caliber rifles. The barrel pusher is operated simply by a 1/2 standard wrench or socket. The device fits into the receiver and uses a nylon block that pushes on the breech end of the barrel to push it out of the receiver without damage. Constructed of steel and finished with a black phosphate coating.
More

Ruger 30mm Ring Mount 5B30HM...

$34.99
MidwayUSA Ruger 30mm Ring Mount 5B30HM Matte High
+ $4.99 shipping
/ruger-30mm-ring-mount/4OZ8EkXsMDZ2nTyQ-rwHiw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .550 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 3B Gloss...

$34.99
MidwayUSA Ruger 1 Ring Mount 3B Gloss Low
+ $4.99 shipping
/ruger-1-ring-mount-3b/Qu4e6U8D8JPXH9Rm0JJ4fg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 3K Silver...

$37.99
MidwayUSA Ruger 1 Ring Mount 3K Silver Low
+ $4.99 shipping
/ruger-1-ring-mount-3k/X3P7w3Uv5LQ0nHIiA7qX8A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube)
More

Tekmat Ruger Mini 14 Cleaning...

$24.95
eBay Tekmat Ruger Mini 14 Cleaning Mat 12x36 With Parts Schematic
Free Shipping
/tekmat-ruger-mini-14/qQRT7VnCIFe-CcqRwhvFTg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
TEKMAT Ruger Mini 14 Cleaning Mat 12x36 with Parts Schematic The perfect cleaning and repair mat designed specifically for your Ruger Mini 14 . Have fun and learn while you work on your and my favorite rifle. The soft top protects your gun from scratches while the neoprene rubber backing protects your work PROTECT YOUR GUN AND WORK AREA The soft polyester top will ensure your gun doesn't get scratched while the neoprene rubber backing on the mat will keep everything in place and prevent your
More

Ruger 50-rd. Factory 10/22 Mag

$54.99
Sportsman's Guide Ruger 50-rd. Factory 10/22 Mag
+ $10.99 shipping
/ruger-50rd-factory/xO5o9EhEonX2a-C4IMCkPA==/info
Sportsman's Guide
IN_STOCK ( In stock )
Ruger Factory 10/22 Mag. Factory-new Ruger Magazines for the 10/22, SR-22 and 22 Charger. Rugged black polymer construction. Round Capacity: 50. Gender: Unisex.
More

EGW 1-Piece Picatinny-Style...

$44.99
MidwayUSA EGW 1-Piece Picatinny-Style 20 MOA Elevated Base Ruger 10/22 Matte
+ $4.99 shipping
/egw-1piece/E0nZ7Qsm-DFimOghjYCoLg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This high-quality elevated Picatinny-style base has 20 MOA built into it to allow zeroing at long distances. It is constructed of aluminum and includes mounting hardware. Technical Information Material: Aluminum Style: Picatinny Fits: Ruger 10/22 Length: 6 1/4 Notes: Mounting Hardware Included
More

Lightweight Tactical Scope...

$39.99
Brownells Lightweight Tactical Scope Mounts - Ruger 10/22 0 Moa
+ $7.95 shipping
/lightweight-tactical/0cp4ioJFmLilF0das_Vpqw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Add the versatility of a one-piece Picatinny scope rail to your rifle or shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction and in many cases will not obstruct usage of factory iron sights. Some models available with 20 MOA built-in elevation to aid in long-range shooting without maxing out scope elevation adjustment. Drilled to fit the factory scope mount holes on the gun's receiver. Hex-head mounting screws and Mfg: Egw SPECS: Lightweight Tactical - 6061 T6 aluminum, anodized, matte black finish. Includes socket... Less
More

ATI Advanced Technology...

$15.68
Walmart.com ATI Advanced Technology International 6 Ruger Mini-14 Bottom Rail, Black
+ $4.97 shipping
/ati-advanced-technology/Slb3nd1yyJgK41s8f_Wb8A==/info
Walmart.com
IN_STOCK ( In stock )
Made with durable materials, Advanced Technology International products will take you where you want to go.
More

Lightweight Tactical Scope...

$39.99
Brownells Lightweight Tactical Scope Mounts - Ruger American Short Action 0 Moa
+ $7.95 shipping
/lightweight-tactical/jOVjYEEuXdcEbwRzytUwrg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Add the versatility of a one-piece Picatinny scope rail to your rifle or shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction and in many cases will not obstruct usage of factory iron sights. Some models available with 20 MOA built-in elevation to aid in long-range shooting without maxing out scope elevation adjustment. Drilled to fit the factory scope mount holes on the gun's receiver. Hex-head mounting screws and Mfg: Egw SPECS: Lightweight Tactical - 6061 T6 aluminum, anodized, matte black finish. Includes socket... Less
More

Ruger 30mm Ring Mount 5K30TG...

$34.99
MidwayUSA Ruger 30mm Ring Mount 5K30TG Target Gray High
+ $4.99 shipping
/ruger-30mm-ring-mount/zfErQnPL4N8UCjgMhLGbcw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .550 (measured from base of ring to bottom of scope tube)
More

Ruger P345 15rd Metal CO2 Gas...

$12.95
AirRattle Ruger P345 15rd Metal CO2 Gas Airsoft Magazine Also Fits: Combat Zone Enforcer
+ $9.95 shipping
/ruger-p345-15rd-metal-co2/60E1DSZ_q7btMqy7eMukxA==/info
AirRattle
IN_STOCK ( In stock )
Store not rated
RUGER P345 CO2 AIRSOFT METAL MAGAZINEFeatures: Capacity: 15Compatibility: Ruger CO2 P345 & Material: MetalMade For 6mm Rounds Only (Any Weight OK)
More

Ruger 30mm Ring Mount 4K30HM...

$34.99
MidwayUSA Ruger 30mm Ring Mount 4K30HM Silver Matte Medium
+ $4.99 shipping
/ruger-30mm-ring-mount/sq4mGDwrKXmlhXpiBT0l3g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 4BHM Matte...

$34.99
MidwayUSA Ruger 1 Ring Mount 4BHM Matte Medium
+ $4.99 shipping
/ruger-1-ring-mount-4bhm/EQzLHgK0APZ3NT9_5xdSgQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 4KTG...

$34.99
MidwayUSA Ruger 1 Ring Mount 4KTG Target Gray Medium
+ $4.99 shipping
/ruger-1-ring-mount-4ktg/jDPenahc_6SQN76n3XDrvw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube) Notes: This is 1 ring only, not a pair.
More

Ruger 1 Ring Mount 5BHM Matte...

$34.99
MidwayUSA Ruger 1 Ring Mount 5BHM Matte High
+ $4.99 shipping
/ruger-1-ring-mount-5bhm/2VOsAX5xP_SA_MmCYUdFlA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .550 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 6B30HM...

$37.99
MidwayUSA Ruger 30mm Ring Mount 6B30HM Matte Extra-High
+ $4.99 shipping
/ruger-30mm-ring-mount/397MHO7nI1bUCXLuR9wqzg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .700 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 4K30TG...

$37.99
MidwayUSA Ruger 30mm Ring Mount 4K30TG Target Gray Medium
+ $4.99 shipping
/ruger-30mm-ring-mount/ORBeKlpLax2ZLMh47GjNCg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 4KHM...

$36.99
MidwayUSA Ruger 1 Ring Mount 4KHM Silver Matte Medium
+ $4.99 shipping
/ruger-1-ring-mount-4khm/QqV7UqBI6deCKk24Sq8Ymw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 5KHM...

$34.99
MidwayUSA Ruger 1 Ring Mount 5KHM Silver Matte High
+ $4.99 shipping
/ruger-1-ring-mount-5khm/lWMmkv_Zxmmg8ODGjSwjRQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .550 (measured from base of ring to bottom of scope tube)
More

Ruger - Bear Repellent Pepper...

$39.99
Austin Kayak Ruger - Bear Repellent Pepper Spray 9 oz., Accessories & Repair Parts
Free Shipping
/ruger-bear-repellent/W0YwmmhlqyXk6M8bfxMDag==/info
Austin Kayak
IN_STOCK ( In stock )
Store not rated
Free Shipping
Protect yourself from the dangers of the outdoors when camping, hiking or hunting with the Ruger Bear Repellent Pepper Spray. It should be sprayed in short bursts and will last for about 9 seconds. Ruger Bear Repellent sprays in a shotgun-cloud pattern and has a range of 15-20 feet depending on weather conditions. It is formulated to penetrate wet fur and you need to be sure to engulf the bear's face, especially the eyes and mouth.
More

AVRUGTCL-1 - Gun Tool Ruger

$23.99
Groupon AVRUGTCL-1 - Gun Tool Ruger
Free Shipping
/avrugtcl1-gun-tool/645kQ3cmyg6EUHIl-oi7Fg==/info
Groupon
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Gun Tool Ruger Edition. Made exclusively for Ruger guns and their owners. Real Avid and Ruger designers worked together to create The Gun Tool Ruger Edition. Made for Ruger rifles, shotguns and handguns, it features a scope ring tool, an M77 Hawkeye bedding screwdriver, Phillips and flathead screwdrivers. The Gun Tool Ruger Edition also comes with Torx and Allen wrenches, a scope turret windage and elevation tool, a universal choke tube wrench and a 420 stainless steel claw point blade. Includes: Ruger scope ring blade, M77 Hawkeye bedding blade, stainless steel frame with non-slip grip side-plates, tapered pin punch, choke tube wrench fits 28 ga through 10 ga, Scope windage and elevation adjuster, 2 Torx wrenches: T 10 and T 15, 2 Standard sized Allen wrenches, fits most rings and... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.eap-30212
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.eap-30212