Ruger Mini 14 Factory Stock Electronics Optics Accessories - Shopping.com
Showing results for "ruger mini 14 factory stock"
Results 1 - 40 of 1500+

Ranch Scope Base Ruger...

$53.99
MidwayUSA Ranch Scope Base Ruger Mini-14 Black Oxide
+ $4.99 shipping
/ranch-scope-base-ruger/oqHPwcEC4s3Zn3VvI_Uzbg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
No drilling or tapping is necessary as the steel base clamps directly to the barrel. See-through design allows you to use your iron sights even with a scope installed. Please note that this base was designed for use with the stock Ruger barrel only, it will not work with heavy aftermarket barrels. Technical InformationMateri al: Steel Style: Weaver Fits: Ruger Mini-14 Notes: See through design allows use of open sights. Clamps on to the barrel. Hex wrench included. Stock barrel only. Will not work with aftermarket heavy barrels. Install by removing the top section of the gas block. It is held on with 4 cap screws. Install the scope base with the rail section facing to the rear and attach it to the bottom section of the gas block with the 4 cap screws. This is a scout-type scope base,... Less
More

Weigand 1-Piece Weaver-Style...

$54.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger Mini-14, Mini-30, PC-9, PC-40, Deerfield with Integral Mounts Matte
+ $4.99 shipping
/weigand-1piece/wCdPg2VcIE3QBHziDjQLYA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Weiganf Ruger Mini 14 Scope Mount increases your scope options when you install this lightweight, rail on your Mini 14 Ranch Rifle. Lets you mount mini or short length scopes as well as red dots without permanent modifications or Gunsmithing. Keeps the scope low over the centerline of the receiver to maintain optimum eye and scope alignment. This scope mount also has an enhanced ejection scallop for improved brass ejection. Multiple cross slots allow adjustment for maximum eye relief. Accepts all Weaver-style rings and accessories and accepts Most Picatinny rings and accessories. 5 long, weighs 2.6 ounces. Technical InformationMateri al: AluminumStyle: Weaver (cross-slot)Fits: Ruger Mini 14 , Deerfield, Mini 30, PC-40, PC-9 (Only fits these models with integral mounts) Notes:... Less
More

S&K Insta-Mount Scope Bases -...

$66.99
Brownells S&K Insta-Mount Scope Bases - Ruger Mini-14 181 & Up Series (Weaver)
+ $7.95 shipping
/sk-instamount-scope/S4M4pQ6ZOSH5mF9SwgfZ7g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The BEST WAY to mount a scope on your ex-military rifle. WHY? No major alteration to your valuable firearm No drilling or tapping of the ultra hard receiver Do the work yourself Handsome ruggedness Guaranteed to hold zero Unmatched versatility Can be removed and/or reinstalled easily S&K Insta-Mounts are available in both S&K style (which include 1 Low Matte Rings) and Weaver rings style (Rings not included, base only). Mfg: S&K
More

ATI Ruger Mini-14 TactLite...

$118.47
Walmart.com ATI Ruger Mini-14 TactLite Adjustable Side Field Stock w/SRS B.2.10.1210
Free Shipping
/ati-ruger-mini14/b4GiIJDtzQRq-_LbDtZ_Tg==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Ruger Mini-14 TactLite Six Position Adjustable Side Folding Stock w/ Scorpion Recoil SystemFeatures:- Black/Flat Dark Earth/Destroyer Gray- Six Position Adjustable/Side Folding Stock- Can be Fired from Folded Position- TrakLOCK System- Eliminates Horizontal & Vertical Movement Of The Stock On The Buffer Tube- Provides Smooth Secure Stock Adjustments- Eliminates The Need For Secondary Locking Mechanisms- No Snag Points- Thin Scorpion Recoil Pad- Dual Sided QD Attachment Point- Scorpion Recoil System- Scorpion Razorback Recoil Pad - Non-Slip, Removable- Scorpion Recoil Pistol Grip- Sure-Grip Texture- Recoil Impact Is Absorbed - Shooting Any Load Size Can Be Done With No Pain Being Transferred To The Shooter- Reduces The Challenge To Reacquire The Target By Minimizing The Muzzle Lift- Not... Less
More

Weigand 1-Piece...

$54.99
MidwayUSA Weigand 1-Piece Picatinny-Style Scope Base Ruger Mini-14, Mini-30, PC-9, PC-40, Deerfield with Integral Mounts Matte
+ $4.99 shipping
/weigand-1piece/Cn-BERGV3S0WW04GQku-Sw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These Weigand Bases are similar to Weaver-style bases but built with Picatinny spacing dimensions. Constructed of durable, lightweight aluminum, this WEIG-A-TINNY™ style rail lets you mount mini or short length scopes as well as Aimpoint red dots withough permanent modifications. The WEIG-A-TINNY™ accepts all Weaver-style rings and accessories and accepts Most Picatinny rings and accessories. Technical Information Style: 1-Piece Base Type: Weaver (cross-slot) Material: Aluminum Finish:Matte Notes: 5 Long Weighs 2.6 oz Mounting Hardware Included
More

B-Square Base Ruger Mini-14...

$56.99
MidwayUSA B-Square Base Ruger Mini-14 Matte
+ $4.99 shipping
/bsquare-base-ruger/duh1TiMY8pxAsUiUcumbmQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
B-Square scope bases for sporting rifles require no gunsmithing, install in minutes and are constructed of high grade aluminum. The mount replaces your stock bolt stop cover plate with a threaded one, which allows a scope to be quickly and easily mounted to a rifle. There is also a front and rear alignment set screw used for locking down the mount tightly and adjusting your zero. Technical Information: Material: Aluminum Style: Standard dove-tail Notes Rings not included Fits 181 series and later Mini-14's
More

Ruger 1 Scope Rings - 1 Scope...

$34.99
Brownells Ruger 1 Scope Rings - 1 Scope Ring, 5b, High, Blue
+ $7.95 shipping
/ruger-1-scope-rings-1/PCwO0XrRDqPrbgob-tXZ6g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
High-quality Ruger factory rings install easily and provide solid, zero-movement scope attachment to Ruger rifles and handguns with integral bases, No. 1 rifles with factory base, and No. 3 rifles with special factory bases available separately. Low, Medium, High, and Extra-High heights in blued carbon steel, natural stainless steel, or stainless with Ruger's proprietary matte Target Grey finish. Mfg: Ruger SPECS: Carbon steel, polished blue finish (BL), stainless steel, natural (SS), or Target Grey (TG) finish. Ring heights measured from top of base to bottom of scope tube. Low - .325. Medium (Med.) - .435. High - .565. Extra-High (X-High) - .680. Offset Ring availa
More

Ruger 1 Ring Mount 4K Silver...

$37.99
MidwayUSA Ruger 1 Ring Mount 4K Silver Medium
+ $4.99 shipping
/ruger-1-ring-mount-4k/WaxcTrFC7dQymDBvJmZCrw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger Single Medium Scope...

$34.99
Academy Sports and Outdoors Ruger Single Medium Scope Ring (0736676902705)
+ $7.25 shipping
/ruger-single-medium-scope/NSLz_Dj7MOYSw5Y-BGSFLg==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
The Ruger Single Medium Scope Ring is made of alloy and accepts up to 42 mm (1.65) diameter tubes.
More

Ruger 1 Ring Mount 3K Silver...

$37.99
MidwayUSA Ruger 1 Ring Mount 3K Silver Low
+ $4.99 shipping
/ruger-1-ring-mount-3k/X3P7w3Uv5LQ0nHIiA7qX8A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 6B30...

$34.99
MidwayUSA Ruger 30mm Ring Mount 6B30 Gloss Extra-High
+ $4.99 shipping
/ruger-30mm-ring-mount/d3WaURoiCvpU0klFDhzhZA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .700 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Extended Front Ring...

$34.99
MidwayUSA Ruger 1 Extended Front Ring Mount 4KO Silver Medium
+ $4.99 shipping
/ruger-1-extended-front/enFhcySMTRuWdA4vbulUvQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Scope Rings - 1 Scope...

$34.99
Brownells Ruger 1 Scope Rings - 1 Scope Ring, 4b, Medium, Blue
+ $7.95 shipping
/ruger-1-scope-rings-1/rWPoHx64zckxTUniqhkh4Q==/info
Brownells
IN_STOCK ( In stock )
Store not rated
High-quality Ruger factory rings install easily and provide solid, zero-movement scope attachment to Ruger rifles and handguns with integral bases, No. 1 rifles with factory base, and No. 3 rifles with special factory bases available separately. Low, Medium, High, and Extra-High heights in blued carbon steel, natural stainless steel, or stainless with Ruger's proprietary matte Target Grey finish. Mfg: Ruger SPECS: Carbon steel, polished blue finish (BL), stainless steel, natural (SS), or Target Grey (TG) finish. Ring heights measured from top of base to bottom of scope tube. Low - .325. Medium (Med.) - .435. High - .565. Extra-High (X-High) - .680. Offset Ring availa
More

Ruger 1 Ring Mount 4B Gloss...

$36.99
MidwayUSA Ruger 1 Ring Mount 4B Gloss Medium
+ $4.99 shipping
/ruger-1-ring-mount-4b/fd36gW1oP6gFUbRNd-tJSg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .43 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 5B30...

$34.99
MidwayUSA Ruger 30mm Ring Mount 5B30 Gloss High
+ $4.99 shipping
/ruger-30mm-ring-mount/SBXwM3_x-rIfXoB-EmICwA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .550 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 5BHM Matte...

$34.99
MidwayUSA Ruger 1 Ring Mount 5BHM Matte High
+ $4.99 shipping
/ruger-1-ring-mount-5bhm/2VOsAX5xP_SA_MmCYUdFlA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .550 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 5K30HM...

$37.99
MidwayUSA Ruger 30mm Ring Mount 5K30HM Silver Matte High
+ $4.99 shipping
/ruger-30mm-ring-mount/2nK8F432Q71S-PmTEWdzdw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .550 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 6B30HM...

$37.99
MidwayUSA Ruger 30mm Ring Mount 6B30HM Matte Extra-High
+ $4.99 shipping
/ruger-30mm-ring-mount/397MHO7nI1bUCXLuR9wqzg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .700 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 4BHM Matte...

$34.99
MidwayUSA Ruger 1 Ring Mount 4BHM Matte Medium
+ $4.99 shipping
/ruger-1-ring-mount-4bhm/EQzLHgK0APZ3NT9_5xdSgQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 3BHM Matte...

$36.99
MidwayUSA Ruger 1 Ring Mount 3BHM Matte Low
+ $4.99 shipping
/ruger-1-ring-mount-3bhm/EvGHvSj85exJ0JLQfWG6Wg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube) Notes: This is one ring only.
More

Ruger 1 Ring Mount 3KHM...

$34.99
MidwayUSA Ruger 1 Ring Mount 3KHM Silver Matte Low
+ $4.99 shipping
/ruger-1-ring-mount-3khm/M0TgnomY8DIy7LcxANBbkQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 4KHM...

$36.99
MidwayUSA Ruger 1 Ring Mount 4KHM Silver Matte Medium
+ $4.99 shipping
/ruger-1-ring-mount-4khm/QqV7UqBI6deCKk24Sq8Ymw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 6K30TG...

$34.99
MidwayUSA Ruger 30mm Ring Mount 6K30TG Target Gray Extra High
+ $4.99 shipping
/ruger-30mm-ring-mount/TPY3XFK01IvWAYAcp8McJg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .700 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 3KTG...

$34.99
MidwayUSA Ruger 1 Ring Mount 3KTG Target Gray Low
+ $4.99 shipping
/ruger-1-ring-mount-3ktg/UMx5JyTiCsnp0sMI1WzcBw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 4K30...

$37.99
MidwayUSA Ruger 30mm Ring Mount 4K30 Silver Medium
+ $4.99 shipping
/ruger-30mm-ring-mount/bzJb2I51yxsUVAB6OTDarQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 77/22 Matte Hi 1In...

$56.62
Walmart.com Ruger 77/22 Matte Hi 1In Ringmounts
+ $5.65 shipping
/ruger-7722-matte-hi-1in/WHa_mUGk13fsHNZOYHUErw==/info
Walmart.com
IN_STOCK ( In stock )
Tube Diameter: 1 Finish: Matte Ring Height: High Gun Model: Ruger #1, 77/22 Ring Type: Weaver Style
More

Ruger 1 Ring Mount 4KTG...

$34.99
MidwayUSA Ruger 1 Ring Mount 4KTG Target Gray Medium
+ $4.99 shipping
/ruger-1-ring-mount-4ktg/jDPenahc_6SQN76n3XDrvw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube) Notes: This is 1 ring only, not a pair.
More

Ruger 30mm Ring Mount 4K30HM...

$34.99
MidwayUSA Ruger 30mm Ring Mount 4K30HM Silver Matte Medium
+ $4.99 shipping
/ruger-30mm-ring-mount/sq4mGDwrKXmlhXpiBT0l3g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Barska 1-Piece Weaver-Style...

$19.99
MidwayUSA Barska 1-Piece Weaver-Style Scope Base Ruger Mini-14 Aluminum Matte
Free Shipping
/barska-1piece/2QCU-YRrBb8AWFQyRmy-FQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
This Weaver-Style scope mount is constructed of aluminum. It includes mounting hardware and will allow you to securely mount your optic to your rifle. Technical Information Material: Aluminum Style: Weaver (cross-slot) Fits: Ruger Mini-14 Notes: Mounting Hardware Included
More

B-Square Weaver-Style Scope...

$79.99
MidwayUSA B-Square Weaver-Style Scope Base with Rings Ruger Mini-14 Gloss
+ $4.99 shipping
/bsquare-weaverstyle/WwtPP0ATYOEHSgO1FIZIJA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
B-Square aluminum scope bases for sporting rifles require no gunsmithing and install in minutes. The quick detach bases have return-to-zero capability and extra-long ring base rails to achieve maximum eye relief adjustments. 1 InterLock Weaver-Style rings included. Technical InformationStyle: Weaver Fits: Ruger Mini 14 (Series 181 and later) Material: Aluminum Notes: See through design allows use of open sights. No gunsmithing required. Comes with two 1 inch rings. Attaches and replaces the bolt stop cover with a threaded knob.
More

B-Square Weaver-Style Scope...

$79.99
MidwayUSA B-Square Weaver-Style Scope Base with Rings Ruger Mini-14 Silver
+ $4.99 shipping
/bsquare-weaverstyle/aR7OEThtXepkWilx1y93lg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
B-Square aluminum scope bases for sporting rifles require no gunsmithing and install in minutes. The quick detach bases have return-to-zero capability and extra-long ring base rails to achieve maximum eye relief adjustments. 1 InterLock Weaver-Style rings included. Technical InformationStyle: Weaver Fits: Ruger Mini 14 (Series 181 and later) Material: Aluminum Notes: See through design allows use of open sights. No gunsmithing required. Comes with two 1 inch rings. Attaches and replaces the bolt stop cover with a threaded knob.
More

Power Custom 1-Piece...

$28.99
MidwayUSA Power Custom 1-Piece Weaver-Style Base Ruger Mark II Matte
+ $4.99 shipping
/power-custom-1piece/6G_ms1NZ2tc7UTbDPfpIyw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Power Custom base fits factory drilled and tapped Ruger Mark 2 handguns. It is contoured and fits flush with the receiver. Weaver-style cross-slots allow better control of the position of the scope. Technical InformationMateri al: Aluminum Style: Weaver Fits: Ruger Mark II Notes: Multiple Slots to Allow for Precise Positioning of Rings Mounting hardware included. Color: Matte
More

Power Custom 1-Piece...

$28.99
MidwayUSA Power Custom 1-Piece Weaver-Style Base Ruger Mark II Silver
+ $4.99 shipping
/power-custom-1piece/DAgJ-suaJ-XYr4cIkQvrfQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Power Custom base fits factory drilled and tapped Ruger Mark 2 handguns. It is contoured and fits flush with the receiver. Weaver-style cross-slots allow better control of the position of the scope. Technical InformationMateri al: Aluminum Style: Weaver Fits: Ruger Mark II Notes: Multiple Slots to Allow for Precise Positioning of Rings Mounting hardware included. Color: Silver
More

Ruger Mini-14 300 AAC...

$39.99
Academy Sports and Outdoors Ruger Mini-14 300 AAC Blackout 20-Round Replacement Magazine (0736676904846)
+ $7.25 shipping
/ruger-mini14-300-aac/WRCVbP77cHG65BUbSJvesg==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
The Ruger Mini-14 300 AAC Blackout 20-Round Replacement Magazine is made of steel and has 300 AAC Blackout lasered text on 1 side.
More

Egw Ruger 10/22 Scope Bases -...

$39.99
Brownells Egw Ruger 10/22 Scope Bases - Ruger 10/22 0 Moa
+ $7.95 shipping
/egw-ruger-1022-scope/DPbAUAyLSQh9LxffIz66NA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
EGW Ruger 10/22 Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun's receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002. Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx screws and wrench. EGW recommends 20 inc Mfg: Egw
More

Ruger 1-Piece Tip-Off...

$12.99
MidwayUSA Ruger 1-Piece Tip-Off Weaver-Style Scope Base Ruger 10/22 Silver
+ $4.99 shipping
/ruger-1piece-tipoff/kjIgy4wtqaB0b-b_6zyP1Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This scope base is constructed of aluminum and includes mounting hardware. Technical InformationMateri al: Aluminum Notes: Mounting Hardware Included
More

Ruger 1-Piece Tip-Off...

$9.99
MidwayUSA Ruger 1-Piece Tip-Off Weaver-Style Scope Base Ruger 10/22 Matte
+ $4.99 shipping
/ruger-1piece-tipoff/U3HofAUY0t7KC8l4DFX8lw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This scope base is constructed of aluminum and includes mounting hardware. Technical InformationMateri al: Aluminum Notes: Mounting Hardware Included
More

Timney Ruger 77/22; 77/17;...

$47.99
Brownells Timney Ruger 77/22; 77/17; 77/44; 77/50 Sear & Spring - Ruger Sear & Spring
+ $7.95 shipping
/timney-ruger-7722/DjjgqsGbq-hvZKR9FrT2Gw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Hardened stainless steel sear provides a crisp 2 lb. weight of pull. Sear notch is surface ground for correct angle and engagement. Includes reduced power return spring and complete instructions. Mfg: Timney SPECS: Stainless steel. Fits Ruger 77/22; 77/17; 77/44; 77/50 in calibers .22 LR, .22 Magnum and .22 Hornet. May require minor fitting.
More

Weaver 1-Piece Multi Slot...

$41.99
MidwayUSA Weaver 1-Piece Multi Slot Tactical Weaver-Style Base for Ruger Mini 14, Mini 30 Matte
+ $4.99 shipping
/weaver-1piece-multi-slot/JckaJrj16HwPs5Ka4cvnmg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This one-piece tactical multi-slot base is constructed of aluminum and includes mounting hardware. Technical InformationMateri al: Aluminum Style: Weaver Fits: Firearm listed in description Notes: Mounting Hardware Included
More

Egw Ruger American Short...

$39.99
Brownells Egw Ruger American Short Action Scope Bases - Ruger American Short Action 0 Moa
+ $7.95 shipping
/egw-ruger-american-short/TQf1OFuObLcpcysS2RL_mw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
EGW Ruger American Short Action Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun's receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002. Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx screws and wrench. EGW r Mfg: Egw
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp17.xss2-30405
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp17.xss2-30405