Showing results for "ruger mini 14 factory stock"
Results 1 - 40 of 1500+

Ranch Scope Base Ruger...

$53.99
MidwayUSA Ranch Scope Base Ruger Mini-14 Black Oxide
+ $4.99 shipping
/ranch-scope-base-ruger/oqHPwcEC4s3Zn3VvI_Uzbg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
No drilling or tapping is necessary as the steel base clamps directly to the barrel. See-through design allows you to use your iron sights even with a scope installed. Please note that this base was designed for use with the stock Ruger barrel only, it will not work with heavy aftermarket barrels. Technical InformationMateri al: Steel Style: Weaver Fits: Ruger Mini-14 Notes: See through design allows use of open sights. Clamps on to the barrel. Hex wrench included. Stock barrel only. Will not work with aftermarket heavy barrels. Install by removing the top section of the gas block. It is held on with 4 cap screws. Install the scope base with the rail section facing to the rear and attach it to the bottom section of the gas block with the 4 cap screws. This is a scout-type scope base,... Less
More

Ranch Scope Base Ruger...

$53.99
MidwayUSA Ranch Scope Base Ruger Mini-14 Black Oxide
+ $4.99 shipping
/ranch-scope-base-ruger/oqHPwcEC4s3Zn3VvI_Uzbg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
No drilling or tapping is necessary as the steel base clamps directly to the barrel. See-through design allows you to use your iron sights even with a scope installed. Please note that this base was designed for use with the stock Ruger barrel only, it will not work with heavy aftermarket barrels. Technical InformationMateri al: Steel Style: Weaver Fits: Ruger Mini-14 Notes: See through design allows use of open sights. Clamps on to the barrel. Hex wrench included. Stock barrel only. Will not work with aftermarket heavy barrels. Install by removing the top section of the gas block. It is held on with 4 cap screws. Install the scope base with the rail section facing to the rear and attach it to the bottom section of the gas block with the 4 cap screws. This is a scout-type scope base,... Less
More

Insta-Mount Scope Bases -...

$63.99
Brownells Insta-Mount Scope Bases - Ruger Mini-14 181 & Up Series (Weaver)
+ $7.95 shipping
/instamount-scope-bases/S4M4pQ6ZOSH5mF9SwgfZ7g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The BEST WAY to mount a scope on your ex-military rifle. WHY? No major alteration to your valuable firearm No drilling or tapping of the ultra hard receiver Do the work yourself Handsome ruggedness Guaranteed to hold zero Unmatched versatility Can be removed and/or reinstalled easily S&K Insta-Mounts are available in both S&K style (which include 1 Low Matte Rings) and Weaver rings style (Rings not included, base only). Mfg: S&K
More

Ruger 1 Extended Front Ring...

$34.99
MidwayUSA Ruger 1 Extended Front Ring Mount 4KO Silver Medium
+ $4.99 shipping
/ruger-1-extended-front/enFhcySMTRuWdA4vbulUvQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Weigand 1-Piece Weaver-Style...

$54.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger Mini-14, Mini-30, PC-9, PC-40, Deerfield with Integral Mounts Silver
+ $4.99 shipping
/weigand-1piece/fnE_OkVeBUBEgHyIH8zZWQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weigand Bases are constructed of durable, lightweight aluminum. These versatile bases easily allow your handgun or rifle to be equipped with optical sights. Accepts all Weaver-Style rings and accessories. Gunsmithing may be required. Won't fit older models without integral mounts.Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Ruger Mini 14 , Deerfield, Mini 30, PC-40, PC-9 (Only fits these models with integral mounts) Notes: Mounting Hardware Included
More

Ruger 1 Ring Mount 3BHM Matte...

$36.99
MidwayUSA Ruger 1 Ring Mount 3BHM Matte Low
+ $4.99 shipping
/ruger-1-ring-mount-3bhm/EvGHvSj85exJ0JLQfWG6Wg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube) Notes: This is one ring only.
More

Power Custom 1-Piece...

$22.60
MidwayUSA Power Custom 1-Piece Weaver-Style Base Ruger Mark II Silver
+ $4.99 shipping
/power-custom-1piece/DAgJ-suaJ-XYr4cIkQvrfQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Power Custom base fits factory drilled and tapped Ruger Mark 2 handguns. It is contoured and fits flush with the receiver. Weaver-style cross-slots allow better control of the position of the scope. Technical InformationMateri al: Aluminum Style: Weaver Fits: Ruger Mark II Notes: Multiple Slots to Allow for Precise Positioning of Rings Mounting hardware included. Color: Silver
More

Ruger 1 Ring Mount 3KHM...

$34.99
MidwayUSA Ruger 1 Ring Mount 3KHM Silver Matte Low
+ $4.99 shipping
/ruger-1-ring-mount-3khm/M0TgnomY8DIy7LcxANBbkQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube)
More

B-Square Base Ruger Mini-14...

$56.99
MidwayUSA B-Square Base Ruger Mini-14 Matte
+ $4.99 shipping
/bsquare-base-ruger/duh1TiMY8pxAsUiUcumbmQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
B-Square scope bases for sporting rifles require no gunsmithing, install in minutes and are constructed of high grade aluminum. The mount replaces your stock bolt stop cover plate with a threaded one, which allows a scope to be quickly and easily mounted to a rifle. There is also a front and rear alignment set screw used for locking down the mount tightly and adjusting your zero. Technical Information: Material: Aluminum Style: Standard dove-tail Notes Rings not included Fits 181 series and later Mini-14's
More

Weigand 1-Piece Weaver-Style...

$54.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger Mini-14, Mini-30, PC-9, PC-40, Deerfield with Integral Mounts Matte
+ $4.99 shipping
/weigand-1piece/wCdPg2VcIE3QBHziDjQLYA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weigand Bases are constructed of durable, lightweight aluminum. These versatile bases easily allow your handgun or rifle to be equipped with optical sights. Accepts all Weaver-Style rings and accessories. Gunsmithing may be required. Won't fit older models without integral mounts.Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Ruger Mini 14 , Deerfield, Mini 30, PC-40, PC-9 (Only fits these models with integral mounts) Notes: Mounting Hardware Included
More

Ruger 10/22 Picatinny Scope...

$33.99
Brownells Ruger 10/22 Picatinny Scope Mount - 15 Moa Scope Mount
+ $7.95 shipping
/ruger-1022-picatinny/Ksbr-yAdANYADUkwX2dzhw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Precision CNC machined from lightweight, 6061 T6 aluminum with MIL-STD 1913 Picatinny rail pattern allows mounting a variety of sights. Easily accommodates different-length scope bodies and provides generous adjustment for eye relief. Drilled to fit the factory hole spacing and includes mounting screws. Accepts both Picatinny and Weaver-style rings. Hardcoat anodized for durability. Available with 0 MOA base, or 15 MOA base to help maintain your scope's full elevation adjustment range when shooting at long range. Mfg: Tactical Solutions, Llc SPECS: 6061 T6 aluminum, hardcoat anodized, black, matte finish. 4-5/8 (11.7cm) long, 13/16 (2.1cm) wide, 11/32 (8.7mm) high from top of receiver.
More

Weigand 1-Piece...

$54.99
MidwayUSA Weigand 1-Piece Picatinny-Style Scope Base Ruger Mini-14, Mini-30, PC-9, PC-40, Deerfield with Integral Mounts Matte
+ $4.99 shipping
/weigand-1piece/Cn-BERGV3S0WW04GQku-Sw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These Weigand Bases are similar to Weaver-style bases but built with Picatinny spacing dimensions. Constructed of durable, lightweight aluminum, this WEIG-A-TINNY™ style rail lets you mount mini or short length scopes as well as Aimpoint red dots withough permanent modifications. The WEIG-A-TINNY™ accepts all Weaver-style rings and accessories and accepts Most Picatinny rings and accessories. Technical Information Style: 1-Piece Base Type: Weaver (cross-slot) Material: Aluminum Finish:Matte Notes: 5 Long Weighs 2.6 oz Mounting Hardware Included
More

B-Square Ruger to...

$69.99
MidwayUSA B-Square Ruger to Weaver-Style Adapter (Weaver-Style Scope Base Only) Ruger 96/44, 77/22, 77/44, 77/ML, Mini-14 Ranch, Mini-30 Silver
+ $4.99 shipping
/bsquare-ruger-to/L6QyZHwPhW_HoxPhcZ8Ang==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Bases are designed to adapt the original base system to allow mounting of Weaver-style rings. Technical InformationMateri al: Aluminum Style: Weaver Notes: Works with Weaver-Style rings Mounting Hardware Included Also fits the Ruger 580 Ranch which is the Mini-14 whose serial number starts with 580
More

Ruger 10/22 Picatinny Scope...

$36.99
Brownells Ruger 10/22 Picatinny Scope Mount - 0 Moa Scope Mount
+ $7.95 shipping
/ruger-1022-picatinny/oAdqDs286-jF_h049EVRRA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Precision CNC machined from lightweight, 6061 T6 aluminum with MIL-STD 1913 Picatinny rail pattern allows mounting a variety of sights. Easily accommodates different-length scope bodies and provides generous adjustment for eye relief. Drilled to fit the factory hole spacing and includes mounting screws. Accepts both Picatinny and Weaver-style rings. Hardcoat anodized for durability. Available with 0 MOA base, or 15 MOA base to help maintain your scope's full elevation adjustment range when shooting at long range. Mfg: Tactical Solutions, Llc SPECS: 6061 T6 aluminum, hardcoat anodized, black, matte finish. 4-5/8 (11.7cm) long, 13/16 (2.1cm) wide, 11/32 (8.7mm) high from top of receiver.
More

Ruger 50-rd. Factory 10/22 Mag

$54.99
Sportsman's Guide Ruger 50-rd. Factory 10/22 Mag
+ $10.99 shipping
/ruger-50rd-factory/xO5o9EhEonX2a-C4IMCkPA==/info
Sportsman's Guide
IN_STOCK ( In stock )
Ruger Factory 10/22 Mag. Factory-new Ruger Magazines for the 10/22, SR-22 and 22 Charger. Rugged black polymer construction. Round Capacity: 50. Gender: Unisex.
More

ProMag Archangel Deluxe...

$93.75
Groupon ProMag Archangel Deluxe Target Stock Ruger 10-22 Black
Free Shipping
/promag-archangel-deluxe/KFCGeS7KNJchALEY1OZ3MQ==/info
Groupon
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Pro Mag Archangel Deluxe Target Stock Ruger helps one elevate their shooting to a new level. The Archangel offers handy, lightweight, almost indestructible precision. It allows both right and left handed individuals access.
More

Power Custom Action Wrench...

$39.99
MidwayUSA Power Custom Action Wrench Insert Ruger Mini 14
+ $4.99 shipping
/power-custom-action/I5dWk2fpOYhBs_yDuGPtQg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Power Custom Action Wrench Insert works with the action wrench handle to add in removing your barrel. It is fully CNC'd from billet aluminum.
More

Ruger 1 Ring Mount 3B Gloss...

$34.99
MidwayUSA Ruger 1 Ring Mount 3B Gloss Low
+ $4.99 shipping
/ruger-1-ring-mount-3b/Qu4e6U8D8JPXH9Rm0JJ4fg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 3K Silver...

$37.99
MidwayUSA Ruger 1 Ring Mount 3K Silver Low
+ $4.99 shipping
/ruger-1-ring-mount-3k/X3P7w3Uv5LQ0nHIiA7qX8A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube)
More

EGW 1-Piece Picatinny-Style...

$44.99
MidwayUSA EGW 1-Piece Picatinny-Style 20 MOA Elevated Base Ruger 10/22 Matte
+ $4.99 shipping
/egw-1piece/E0nZ7Qsm-DFimOghjYCoLg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This high-quality elevated Picatinny-style base has 20 MOA built into it to allow zeroing at long distances. It is constructed of aluminum and includes mounting hardware. Technical Information Material: Aluminum Style: Picatinny Fits: Ruger 10/22 Length: 6 1/4 Notes: Mounting Hardware Included
More

Ruger Mini-14 Recoil & Hammer...

$11.99
Brownells Ruger Mini-14 Recoil & Hammer Spring - Mini-14 Recoil Spring
+ $7.95 shipping
/ruger-mini14-recoil/o4033qJPmLnHp8yy2msW_w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Extra-power springs fit Mini-14, -30, Ranch Rifle. Decreases lock time, improves reliability. Recoil spring fits guns with first three digits of serial number 181 and higher. Mfg: Wolff
More

Lightweight Tactical Scope...

$39.99
Brownells Lightweight Tactical Scope Base - Ruger 10/22 0 Moa
+ $7.95 shipping
/lightweight-tactical/0cp4ioJFmLilF0das_Vpqw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Add the versatility of a one-piece Picatinny scope rail to your rifle or shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction and in many cases will not obstruct usage of factory iron sights. Some models available with 20 MOA built-in elevation to aid in long-range shooting without maxing out scope elevation adjustment. Drilled to fit the factory scope mount holes on the gun's receiver. Hex-head mounting screws and Mfg: Egw SPECS: Lightweight Tactical - 6061 T6 aluminum, anodized, matte black finish. Includes socket... Less
More

Ruger 30mm Ring Mount 5B30HM...

$34.99
MidwayUSA Ruger 30mm Ring Mount 5B30HM Matte High
+ $4.99 shipping
/ruger-30mm-ring-mount/4OZ8EkXsMDZ2nTyQ-rwHiw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .550 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 4BHM Matte...

$34.99
MidwayUSA Ruger 1 Ring Mount 4BHM Matte Medium
+ $4.99 shipping
/ruger-1-ring-mount-4bhm/EQzLHgK0APZ3NT9_5xdSgQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 4KTG...

$34.99
MidwayUSA Ruger 1 Ring Mount 4KTG Target Gray Medium
+ $4.99 shipping
/ruger-1-ring-mount-4ktg/jDPenahc_6SQN76n3XDrvw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube) Notes: This is 1 ring only, not a pair.
More

Hiviz Ruger 22/45 Lite 6...

$26.60
Walmart.com Hiviz Ruger 22/45 Lite 6 Interchangeable Lite Pipes
+ $4.97 shipping
/hiviz-ruger-2245-lite-6/uItiBPuXlBpekcQ-yMl3og==/info
Walmart.com
IN_STOCK ( In stock )
This interchangeable front sight from HIVIZ fits Ruger 22/45 Lite Model and has adjustable rear sight. It comes with six LitePipes in various colors, carrying case and key to change LitePipes.
More

Ruger 1 Ring Mount 5BHM Matte...

$34.99
MidwayUSA Ruger 1 Ring Mount 5BHM Matte High
+ $4.99 shipping
/ruger-1-ring-mount-5bhm/2VOsAX5xP_SA_MmCYUdFlA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .550 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 6B30HM...

$37.99
MidwayUSA Ruger 30mm Ring Mount 6B30HM Matte Extra-High
+ $4.99 shipping
/ruger-30mm-ring-mount/397MHO7nI1bUCXLuR9wqzg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .700 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 4KHM...

$36.99
MidwayUSA Ruger 1 Ring Mount 4KHM Silver Matte Medium
+ $4.99 shipping
/ruger-1-ring-mount-4khm/QqV7UqBI6deCKk24Sq8Ymw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 5KHM...

$34.99
MidwayUSA Ruger 1 Ring Mount 5KHM Silver Matte High
+ $4.99 shipping
/ruger-1-ring-mount-5khm/lWMmkv_Zxmmg8ODGjSwjRQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .550 (measured from base of ring to bottom of scope tube)
More

EGW 1-Piece Picatinny-Style...

$44.99
MidwayUSA EGW 1-Piece Picatinny-Style Base Ruger 10/22 Matte
+ $4.99 shipping
/egw-1piece/S12pSqRPjjTbj6K2WacExw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This 1-piece Picatinny/Weaver- style base is constructed of aluminum and includes mounting hardware. The rail allows the user to decide where their scope will be mounted since there are numerous slots, and it will accept both Picatinny and Weaver-style rings. Technical Information Material: Aluminum Style: Picatinny/Weaver Fits: Ruger 10/22 Notes: Mounting Hardware Included
More

PTG Receiver Drilling Fixture...

$43.99
MidwayUSA PTG Receiver Drilling Fixture Ruger 10/22
+ $7.59 shipping
/ptg-receiver-drilling/MPpXaFQ1HsAKDnVvqGVIzQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This drilling jig permits cleaning a 10/22 from the rear without removing the barrel. It locates the correct spot on the rear of the receiver for a hole to be drilled that allows the cleaning rod to pass through. Helps keep the rifle accurate by eliminating damage done by the cleaning rod when inserted through the muzzle. Technical InformationNotes: 4 long, steel Locates cleaning hole location in receiver. Permits cleaning from the rear without barrel removal. Requires that a hole be drilled in the rear of the receiver. Instructions: Remove the two bolts and fiber washers from the fixture. The 10/22 receiver must be completely disassembled with all parts removed, however the barrel can stay in the receiver. The fixture mounts to the right side of the receiver. Use some suitable material... Less
More

Weigand 1-Piece Weaver-Style...

$39.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger Single Six Silver
+ $4.99 shipping
/weigand-1piece/h178UXCshDF7ULh-yXX5CA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weigand Bases are constructed of durable, lightweight aluminum. These versatile bases easily allow your handgun to be equipped with optical sights. Accepts all Weaver-Style rings and accessories. Gunsmithing may be required. Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Ruger Single Six Notes: Mounting Hardware Included Rear Sight needs to be removed before base can be installed.
More

Ruger 1-Piece Tip-Off...

$9.99
MidwayUSA Ruger 1-Piece Tip-Off Weaver-Style Scope Base Ruger 10/22 Matte
+ $4.99 shipping
/ruger-1piece-tipoff/U3HofAUY0t7KC8l4DFX8lw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This scope base is constructed of aluminum and includes mounting hardware. Technical InformationMateri al: Aluminum Notes: Mounting Hardware Included
More

Leatherwood Hi-Lux 1-Piece...

$94.99
MidwayUSA Leatherwood Hi-Lux 1-Piece Tactical Picatinny-Style Scope Base Ruger 77 Matte
+ $4.99 shipping
/leatherwood-hilux/SnW_ftbMvucDJw2gU-szSQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These Picatinny-style bases will accept either Picatinny-style or standard Weaver-style rings. Machined from solid steel bar stock. Technical InformationMateri al: Machined from solid steel bar stock Style: Machined to original Weaver-style dimensions so they will accept either Picatinny or standard Weaver rings Notes: Mounting Hardware Included
More

Tactical Solutions 1-Piece...

$27.99
MidwayUSA Tactical Solutions 1-Piece Picatinny-Style Base Ruger 10/22 Black
+ $4.99 shipping
/tactical-solutions/me9REJKraKWT7x784OtL0Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Made from aircraft grade aluminum. Mounting hardware included. Hard anodized. Black. Technical InformationMateri al: Aircraft aluminum, hard anodized Style: Picatinny Notes: Mounting Hardware Included
More

Ruger American Centerfire...

$82.99
Groupon Ruger American Centerfire Long Action Tactical Rail
Free Shipping
/ruger-american-centerfire/9V_WpVv5noyI_y4XXOZtkg==/info
Groupon
IN_STOCK ( In stock )
Store not rated
Free Shipping
Warne Ruger American Centerfire Long Action Tactical Rail is constructed of solid steel and machined in both standard and 20MOA configurations. Cross slots feature the 1913 Mil-Spec design. Base securely mounts to the gun with T-15 Torx style screws, 25 in./lb. of torque recommended. Matte black only
More

Weigand 1-Piece Weaver-Style...

$54.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger 77/22 with Integral Mounts Matte
+ $4.99 shipping
/weigand-1piece/Oc1dtnjonDeULgCX2ULZXQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weigand Bases are constructed of durable, lightweight aluminum. These versatile bases easily allow your handgun to be equipped with optical sights. Accepts all Weaver-Style rings and accessories. Gunsmithing may be required. Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Ruger 77/22 Notes: Mounting Hardware Included
More

Weigand Integramount Scope...

$62.99
MidwayUSA Weigand Integramount Scope Base with Integral 1 Rings Ruger 10/22 Matte
+ $4.99 shipping
/weigand-integramount/wYz6qSpBWYkppHKGyyGd-g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This 1-piece base places the scope in perfect alignment with the rings so they can't pinch or torque and damage your expensive scope. The ultra-strong aluminum design attaches in seconds to the Ruger 10/22 factory hole spacing with screws (included). Rings accept 1 scopes with objective lenses up to 40mm.Technical InformationMateri al: Aluminum Style: Intergral Fits: Ruger 10/22 Notes: Intergral Rings are .225 and accept 1 Scopes. Mounting Hardware Included
More

Power Custom 1-Piece...

$15.99
MidwayUSA Power Custom 1-Piece Weaver-Style Base Ruger 10/22 Silver
+ $4.99 shipping
/power-custom-1piece/Gnhx-Su25RFf9zIsg75nbw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Power Custom Weaver-style Base mounts to the receiver of your rifle with no gunsmithing required. Much better than using tip-off rings if you're mounting a target-style scope. Does not fit Ruger 10/22 Magnum. Technical Information Material: Aluminum Style: Weaver Fits: Ruger 10/22 Notes: Attaches to the factory pre-drilled and tapped holes in the 10/22 receiver. Measures 4.875x.875x.350 Mounting hardware included.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.eap-30212
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.eap-30212