Category

Optics Accessories
Showing results for "ruger mini 14 barrel"
Results 1 - 40 of 867

John Masen Recoil Pad Ruger...

$15.99
MidwayUSA John Masen Recoil Pad Ruger 10/22, 44 Carbine, Mini-14, and Mini-30 Extended Rubber Black
+ $4.99 shipping
/john-masen-recoil-pad/NZVHz3PRcyvCuUpT3zgWxg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
A black extended rubber recoil pad adds 1 to the length and helps with recoil absorption for the Ruger 10/22, 44 Carbine, Mini-14 and Mini-30. Technical InformationNotes: Uses original screws for installation. Adds approximately 1 to length of stock. Not compatible with plastic stocks, meant for use with factory wooden stocks, or aftermarket stocks properly inletted for the shape of the recoil pad.
More

Ranch Scope Base Ruger...

$53.99
MidwayUSA Ranch Scope Base Ruger Mini-14 Black Oxide
+ $4.99 shipping
/ranch-scope-base-ruger/oqHPwcEC4s3Zn3VvI_Uzbg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
No drilling or tapping is necessary as the steel base clamps directly to the barrel. See-through design allows you to use your iron sights even with a scope installed. Please note that this base was designed for use with the stock Ruger barrel only, it will not work with heavy aftermarket barrels. Technical InformationMateri al: Steel Style: Weaver Fits: Ruger Mini-14 Notes: See through design allows use of open sights. Clamps on to the barrel. Hex wrench included. Stock barrel only. Will not work with aftermarket heavy barrels. Install by removing the top section of the gas block. It is held on with 4 cap screws. Install the scope base with the rail section facing to the rear and attach it to the bottom section of the gas block with the 4 cap screws. This is a scout-type scope base,... Less
More

S&K Insta-Mount Scope Bases -...

$66.99
Brownells S&K Insta-Mount Scope Bases - Ruger Mini-14 181 & Up Series (Weaver)
+ $7.95 shipping
/sk-instamount-scope/S4M4pQ6ZOSH5mF9SwgfZ7g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The BEST WAY to mount a scope on your ex-military rifle. WHY? No major alteration to your valuable firearm No drilling or tapping of the ultra hard receiver Do the work yourself Handsome ruggedness Guaranteed to hold zero Unmatched versatility Can be removed and/or reinstalled easily S&K Insta-Mounts are available in both S&K style (which include 1 Low Matte Rings) and Weaver rings style (Rings not included, base only). Mfg: S&K
More

Volquartsen 1-Piece Barrel...

$32.99
MidwayUSA Volquartsen 1-Piece Barrel Mount Weaver-Style Base Ruger 10/22 Silver
+ $4.99 shipping
/volquartsen-1piece/HmPp5XUpL3xUF110BebkpA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This cantilever-style barrel-mounted base drops-in on all Volquartsen Ruger 10/22 barrels. The scope is mounted to the barrel rather than to the flexible alloy receiver. It is the ultimate scope mounting system for a Ruger 10/22. Uses Weaver-Style rings. May be adapted to other barrels by drilling and tapping the barrel.Technical InformationMateri al: Aluminum Style: Weaver Fits: Volquartsen 10/22 barrels of .920 diameter Will fit other .920 barrels, but requires drilling and tapping barrel Gunsmithing Required:No for Volquartsen barrels Notes: The mount is equipped with supporting set screw to eliminate flex found in most other barrel mounts The mount extends all the way back over the recevier to facilitate any necessary scope adjustments Mounting hardware included Includes 2 8-32 x 1/4... Less
More

ATI Ruger Mini-14 /Mini-30 6...

$17.99
Academy Sports and Outdoors ATI Ruger Mini-14 /Mini-30 6 Aluminum Bottom Picatinny Rail
+ $7.25 shipping
/ati-ruger-mini14/QmVanwNL2uSND0AwH1U4Iw==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
The ATI Ruger Mini-14 /Mini-30 6 Aluminum Bottom Picatinny Rail features anodized 6061 T6 aluminum and loctite screws.
More

Power Custom 1-Piece Barrel...

$44.99
MidwayUSA Power Custom 1-Piece Barrel Mount Weaver-Style Base Ruger 10/22 Matte
+ $4.99 shipping
/power-custom-1piece/aH42yzvFZlKdynzzqo4JvA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These are quality aluminum bases from Power Custom that work with all Weaver-style rings. Please note that this base mounts to both the receiver and the barrel, and the barrel must be drilled and tapped to accept this base. Technical InformationStyle: Weaver Fits: Ruger 10/22 Material: Aluminum Notes: Requires drilling and tapping two holes in the barrel. For use with .920 diameter barrels. Attaches to both the factory receiver holes and the barrel.
More

Weigand 1-Piece Weaver-Style...

$54.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger Mini-14, Mini-30, PC-9, PC-40, Deerfield with Integral Mounts Silver
+ $4.99 shipping
/weigand-1piece/fnE_OkVeBUBEgHyIH8zZWQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Weiganf Ruger Mini 14 Scope Mount increases your scope options when you install this lightweight, rail on your Mini 14 Ranch Rifle. Lets you mount mini or short length scopes as well as red dots without permanent modifications or Gunsmithing. Keeps the scope low over the centerline of the receiver to maintain optimum eye and scope alignment. This scope mount also has an enhanced ejection scallop for improved brass ejection. Multiple cross slots allow adjustment for maximum eye relief. Accepts all Weaver-style rings and accessories and accepts Most Picatinny rings and accessories. 5 long, weighs 2.6 ounces. Technical InformationMateri al: AluminumStyle: Weaver (cross-slot)Fits: Ruger Mini 14 , Deerfield, Mini 30, PC-40, PC-9 (Only fits these models with integral mounts) Notes:... Less
More

Ruger Single Medium Scope Ring

$34.99
Academy Sports and Outdoors Ruger Single Medium Scope Ring
Free Shipping
/ruger-single-medium-scope/NSLz_Dj7MOYSw5Y-BGSFLg==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Ruger Single Medium Scope Ring is made of alloy and accepts up to 42 mm (1.65) diameter tubes.
More

Weigand 1-Piece Weaver-Style...

$54.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger Redhawk with Integral Scope Mounting Notches Machined in Barrel Silver
+ $4.99 shipping
/weigand-1piece/djH-M5E4HnI5zGCwKW_dlg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Weigand Ruger Redhawk mount is constructed of a lightweight aluminum and is a non drill and tap mount. This base is designed for old and new models that have factory scope ring cuts in the barrel of the pistol and accepts weaver-style rings and most picatinny-style rings. Technical Information Material: Aluminum Style: Weaver (cross-slot) Fits: Ruger Redhawks with Ruger scope ring cuts on the barrel Notes: Mounting Hardware Included This is a base only
More

Weigand 1-Piece...

$54.99
MidwayUSA Weigand 1-Piece Picatinny-Style Scope Base Ruger Mini-14, Mini-30, PC-9, PC-40, Deerfield with Integral Mounts Matte
+ $4.99 shipping
/weigand-1piece/Cn-BERGV3S0WW04GQku-Sw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These Weigand Bases are similar to Weaver-style bases but built with Picatinny spacing dimensions. Constructed of durable, lightweight aluminum, this WEIG-A-TINNY™ style rail lets you mount mini or short length scopes as well as Aimpoint red dots withough permanent modifications. The WEIG-A-TINNY™ accepts all Weaver-style rings and accessories and accepts Most Picatinny rings and accessories. Technical Information Style: 1-Piece Base Type: Weaver (cross-slot) Material: Aluminum Finish:Matte Notes: 5 Long Weighs 2.6 oz Mounting Hardware Included
More

B-Square Base Ruger Mini-14...

$56.99
MidwayUSA B-Square Base Ruger Mini-14 Matte
+ $4.99 shipping
/bsquare-base-ruger/duh1TiMY8pxAsUiUcumbmQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
B-Square scope bases for sporting rifles require no gunsmithing, install in minutes and are constructed of high grade aluminum. The mount replaces your stock bolt stop cover plate with a threaded one, which allows a scope to be quickly and easily mounted to a rifle. There is also a front and rear alignment set screw used for locking down the mount tightly and adjusting your zero. Technical Information: Material: Aluminum Style: Standard dove-tail Notes Rings not included Fits 181 series and later Mini-14's
More

Tactical Solutions Ruger...

$33.99
Brownells Tactical Solutions Ruger 10/22 Picatinny Scope Mount - 15 Moa Scope Mount
+ $7.95 shipping
/tactical-solutions-ruger/Ksbr-yAdANYADUkwX2dzhw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Precision CNC machined from lightweight, 6061 T6 aluminum with MIL-STD 1913 Picatinny rail pattern allows mounting a variety of sights. Easily accommodates different-length scope bodies and provides generous adjustment for eye relief. Drilled to fit the factory hole spacing and includes mounting screws. Accepts both Picatinny and Weaver-style rings. Hardcoat anodized for durability. Available with 0 MOA base, or 15 MOA base to help maintain your scope's full elevation adjustment range when shooting at long range. Mfg: Tactical Solutions, Llc SPECS: 6061 T6 aluminum, hardcoat anodized, black, matte finish. 4-5⁄8 (11.7cm) long, 13⁄16 (2.1cm) wide, 11⁄32 (8.7mm) high from top of receiver.
More

Ruger 1 Ring Mount 3B Gloss...

$34.99
MidwayUSA Ruger 1 Ring Mount 3B Gloss Low
+ $4.99 shipping
/ruger-1-ring-mount-3b/Qu4e6U8D8JPXH9Rm0JJ4fg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 5B30...

$34.99
MidwayUSA Ruger 30mm Ring Mount 5B30 Gloss High
+ $4.99 shipping
/ruger-30mm-ring-mount/SBXwM3_x-rIfXoB-EmICwA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .550 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 4K Silver...

$37.99
MidwayUSA Ruger 1 Ring Mount 4K Silver Medium
+ $4.99 shipping
/ruger-1-ring-mount-4k/WaxcTrFC7dQymDBvJmZCrw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 6B30...

$34.99
MidwayUSA Ruger 30mm Ring Mount 6B30 Gloss Extra-High
+ $4.99 shipping
/ruger-30mm-ring-mount/d3WaURoiCvpU0klFDhzhZA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .700 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 4B Gloss...

$36.99
MidwayUSA Ruger 1 Ring Mount 4B Gloss Medium
+ $4.99 shipping
/ruger-1-ring-mount-4b/fd36gW1oP6gFUbRNd-tJSg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .43 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Extended Front Ring...

$34.99
MidwayUSA Ruger 1 Extended Front Ring Mount 4BO Matte Medium
+ $4.99 shipping
/ruger-1-extended-front/lMQchFlaVtgYerGHlp389g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Dual Rail Barrel Mount For...

$12.79
eBay Dual Rail Barrel Mount For Tactical Accessories Fits Ruger 10/22 77/22 Rifles
Free Shipping
/dual-rail-barrel-mount/xHZqaMfKM1zKHNp9ZAikWQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Untitled Document This is a Tactical Universal Fit Dual Rail Barrel Mount Clamp For Attaching Small Accessories This Item Fits Ruger 10/22 77/22 Rifles ( Part# AM-MT014 )!! Free Domestic shipping within the USA !! Brand New Manufacture warranty against defects Material Aluminum Color Black Manufacture Imported Specifications Matte Black Color, Made from aluminum, Clamps directly to the barrel of most rifles with an external diameter between 1/2 - 3/4, Provides two short Weaver style rails for
More

Ruger 30mm Ring Mount 4B30...

$37.99
MidwayUSA Ruger 30mm Ring Mount 4B30 Gloss Medium
+ $4.99 shipping
/ruger-30mm-ring-mount/iTU7V-IxBi6d865A90SGAw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical Information Material: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Tactical Solutions Ruger...

$36.99
Brownells Tactical Solutions Ruger 10/22 Picatinny Scope Mount - 0 Moa Scope Mount
+ $7.95 shipping
/tactical-solutions-ruger/oAdqDs286-jF_h049EVRRA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Precision CNC machined from lightweight, 6061 T6 aluminum with MIL-STD 1913 Picatinny rail pattern allows mounting a variety of sights. Easily accommodates different-length scope bodies and provides generous adjustment for eye relief. Drilled to fit the factory hole spacing and includes mounting screws. Accepts both Picatinny and Weaver-style rings. Hardcoat anodized for durability. Available with 0 MOA base, or 15 MOA base to help maintain your scope's full elevation adjustment range when shooting at long range. Mfg: Tactical Solutions, Llc SPECS: 6061 T6 aluminum, hardcoat anodized, black, matte finish. 4-5⁄8 (11.7cm) long, 13⁄16 (2.1cm) wide, 11⁄32 (8.7mm) high from top of receiver.
More

John Masen Recoil Pad Ruger...

$15.99
MidwayUSA John Masen Recoil Pad Ruger 10/22, 44 Carbine, Mini-14, and Mini-30 Extended Rubber Black
+ $4.99 shipping
/john-masen-recoil-pad/NZVHz3PRcyvCuUpT3zgWxg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
A black extended rubber recoil pad adds 1 to the length and helps with recoil absorption for the Ruger 10/22, 44 Carbine, Mini-14 and Mini-30. Technical InformationNotes: Uses original screws for installation. Adds approximately 1 to length of stock. Not compatible with plastic stocks, meant for use with factory wooden stocks, or aftermarket stocks properly inletted for the shape of the recoil pad.
More

RUGER MINI14 SS MOUNT W/1IN...

$94.99
Daniel Outdoors RUGER MINI14 SS MOUNT W/1IN RINGS
+ $5.99 shipping
/ruger-mini14-ss-mount/6p0V43dX_Ul0nfzBWaZuGw==/info
Daniel Outdoors
IN_STOCK ( In stock )
Store not rated
Sporting Rifle Mount - Ruger Mini-14 181 series and laterSee-under type allows use of gun\'s sightsInstalls by replacing the bolt stop cover plateAttaches by a single knob to the threaded cover plateStandard dovetail baseIncludes 1\ rings
More

Ruger 30mm Ring Mount 4B30HM...

$36.99
MidwayUSA Ruger 30mm Ring Mount 4B30HM Matte Medium
+ $7.59 shipping
/ruger-30mm-ring-mount/BNSp3P2si3EDwkOeaoR-Gg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 6B30HM...

$37.99
MidwayUSA Ruger 30mm Ring Mount 6B30HM Matte Extra-High
+ $4.99 shipping
/ruger-30mm-ring-mount/397MHO7nI1bUCXLuR9wqzg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .700 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 3BHM Matte...

$36.99
MidwayUSA Ruger 1 Ring Mount 3BHM Matte Low
+ $4.99 shipping
/ruger-1-ring-mount-3bhm/EvGHvSj85exJ0JLQfWG6Wg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube) Notes: This is one ring only.
More

Ruger 10/22 and Mini 14/30...

$11.99
Cabela's Ruger 10/22 and Mini 14/30 Guide Books
+ $5.95 shipping
/ruger-1022-and-mini/W2O6cT86MeYV8Cvu1ManzA==/info
Cabela's
IN_STOCK ( In stock )
These Ruger Guide Books are complete and up-to-date manuals. Available: The Ruger 10/22 Guide Book has info on all 10/22 models from 1964-2005. 55 pages. 68 illustrations. The Ruger Mini-14/30 Complete Guide is a detailed, illustrated manual for Ruger Mini-14/30 semi-auto rifles. Media > Books
More

Ruger 1 Ring Mount 3KHM...

$34.99
MidwayUSA Ruger 1 Ring Mount 3KHM Silver Matte Low
+ $4.99 shipping
/ruger-1-ring-mount-3khm/M0TgnomY8DIy7LcxANBbkQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 6BHM Matte...

$36.99
MidwayUSA Ruger 1 Ring Mount 6BHM Matte Extra-High
+ $4.99 shipping
/ruger-1-ring-mount-6bhm/T13_1_w-I8PrsOOO6BZD9A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .700 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 6K30TG...

$34.99
MidwayUSA Ruger 30mm Ring Mount 6K30TG Target Gray Extra High
+ $4.99 shipping
/ruger-30mm-ring-mount/TPY3XFK01IvWAYAcp8McJg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .700 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 5KTG...

$37.99
MidwayUSA Ruger 1 Ring Mount 5KTG Target Gray High
+ $4.99 shipping
/ruger-1-ring-mount-5ktg/a6X10Zaa4_hsKU3vxfk9TA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .550 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Extended Front Ring...

$34.99
MidwayUSA Ruger 1 Extended Front Ring Mount 4KO Silver Medium
+ $4.99 shipping
/ruger-1-extended-front/enFhcySMTRuWdA4vbulUvQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 6K30...

$34.99
MidwayUSA Ruger 30mm Ring Mount 6K30 Silver Extra-High
+ $4.99 shipping
/ruger-30mm-ring-mount/gws8c3UE4xPoo0fJAo0zvQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .700 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 4KTG...

$34.99
MidwayUSA Ruger 1 Ring Mount 4KTG Target Gray Medium
+ $4.99 shipping
/ruger-1-ring-mount-4ktg/jDPenahc_6SQN76n3XDrvw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube) Notes: This is 1 ring only, not a pair.
More

Ruger 1 Ring Mount 5KHM...

$34.99
MidwayUSA Ruger 1 Ring Mount 5KHM Silver Matte High
+ $4.99 shipping
/ruger-1-ring-mount-5khm/lWMmkv_Zxmmg8ODGjSwjRQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .550 (measured from base of ring to bottom of scope tube)
More

RUGER MINI14 BL MOUNT W/1IN...

$94.99
Daniel Outdoors RUGER MINI14 BL MOUNT W/1IN RINGS
+ $5.99 shipping
/ruger-mini14-bl-mount/AD13_lJfLgukfQOBMQMFJQ==/info
Daniel Outdoors
IN_STOCK ( In stock )
Store not rated
Sporting Rifle Mount - Ruger Mini-14 181 series and laterSee-under type allows use of gun\'s sightsInstalls by replacing the bolt stop cover plateAttaches by a single knob to the threaded cover plateStandard dovetail baseIncludes 1\ rings
More

Egw Lightweight Tactical...

$39.99
Brownells Egw Lightweight Tactical Scope Base - Ruger American Short Action 0 Moa
+ $7.95 shipping
/egw-lightweight-tactical/jOVjYEEuXdcEbwRzytUwrg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Add the versatility of a one-piece Picatinny scope rail to your rifle or shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction and in many cases will not obstruct usage of factory iron sights. Some models available with 20 MOA built-in elevation to aid in long-range shooting without maxing out scope elevation adjustment. Drilled to fit the factory scope mount holes on the gun's receiver. Hex-head mounting screws and Mfg: Egw SPECS: Lightweight Tactical - 6061 T6 aluminum, anodized, matte black finish. Includes socket... Less
More

PTG Receiver Drilling Fixture...

$43.99
MidwayUSA PTG Receiver Drilling Fixture Ruger 10/22
+ $7.59 shipping
/ptg-receiver-drilling/MPpXaFQ1HsAKDnVvqGVIzQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This drilling jig permits cleaning a 10/22 from the rear without removing the barrel. It locates the correct spot on the rear of the receiver for a hole to be drilled that allows the cleaning rod to pass through. Helps keep the rifle accurate by eliminating damage done by the cleaning rod when inserted through the muzzle. Technical InformationNotes: 4 long, steel Locates cleaning hole location in receiver. Permits cleaning from the rear without barrel removal. Requires that a hole be drilled in the rear of the receiver. Instructions: Remove the two bolts and fiber washers from the fixture. The 10/22 receiver must be completely disassembled with all parts removed, however the barrel can stay in the receiver. The fixture mounts to the right side of the receiver. Use some suitable material... Less
More

Egw Lightweight Tactical...

$39.99
Brownells Egw Lightweight Tactical Scope Base - Ruger American Rimfire 0 Moa
+ $7.95 shipping
/egw-lightweight-tactical/mUmq0eAhhoxiDcqe_r-Zrg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Add the versatility of a one-piece Picatinny scope rail to your rifle or shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction and in many cases will not obstruct usage of factory iron sights. Some models available with 20 MOA built-in elevation to aid in long-range shooting without maxing out scope elevation adjustment. Drilled to fit the factory scope mount holes on the gun's receiver. Hex-head mounting screws and Mfg: Egw SPECS: Lightweight Tactical - 6061 T6 aluminum, anodized, matte black finish. Includes socket... Less
More

Ironsighter See-thru Scope...

$29.99
eBay Ironsighter See-thru Scope Mount For Ruger Mini-14 Iro770
Free Shipping
/ironsighter-seethru/6qigMSOQyX4qErQtTe940g==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Ironsighter See-Thru Scope Mount for Ruger Mini-14 Mounting screws and instructions included.Make sure to review the photos and thoroughly read the description and all shipping details before purchasing, as they provide important information about what you are getting and how you are getting it. Potential buyers who will be needing shipping to Alaska, Hawaii, or Puerto Rico need to ask for a shipping quote before ordering, as there will be an extra cost to ship to these areas. We do not ship in
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335