Showing results for "ruger mini 14 barrel"
Results 1 - 40 of 1500+

Power Custom 1-Piece Barrel...

$44.99
MidwayUSA Power Custom 1-Piece Barrel Mount Weaver-Style Base Ruger 10/22 Matte
+ $4.99 shipping
/power-custom-1piece/aH42yzvFZlKdynzzqo4JvA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These are quality aluminum bases from Power Custom that work with all Weaver-style rings. Please note that this base mounts to both the receiver and the barrel, and the barrel must be drilled and tapped to accept this base. Technical InformationStyle: Weaver Fits: Ruger 10/22 Material: Aluminum Notes: Requires drilling and tapping two holes in the barrel. For use with .920 diameter barrels. Attaches to both the factory receiver holes and the barrel.
More

Ranch Scope Base Ruger...

$53.99
MidwayUSA Ranch Scope Base Ruger Mini-14 Black Oxide
+ $4.99 shipping
/ranch-scope-base-ruger/oqHPwcEC4s3Zn3VvI_Uzbg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
No drilling or tapping is necessary as the steel base clamps directly to the barrel. See-through design allows you to use your iron sights even with a scope installed. Please note that this base was designed for use with the stock Ruger barrel only, it will not work with heavy aftermarket barrels. Technical InformationMateri al: Steel Style: Weaver Fits: Ruger Mini-14 Notes: See through design allows use of open sights. Clamps on to the barrel. Hex wrench included. Stock barrel only. Will not work with aftermarket heavy barrels. Install by removing the top section of the gas block. It is held on with 4 cap screws. Install the scope base with the rail section facing to the rear and attach it to the bottom section of the gas block with the 4 cap screws. This is a scout-type scope base,... Less
More

Power Custom Action Wrench...

$39.99
MidwayUSA Power Custom Action Wrench Insert Ruger Mini 14
+ $4.99 shipping
/power-custom-action/I5dWk2fpOYhBs_yDuGPtQg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Power Custom Action Wrench Insert works with the action wrench handle to add in removing your barrel. It is fully CNC'd from billet aluminum.
More

Power Custom Barrel Wrench...

$39.99
MidwayUSA Power Custom Barrel Wrench Insert Ruger Mini 14
+ $4.99 shipping
/power-custom-barrel/Jc-14ssfmcw2nKMphsdf6A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Power Custom Barrel Wrench Insert works with the action wrench handle to aid in removing your barrel. Fully CNC'd from Billet Aluminum.
More

Power Custom 1-Piece Barrel...

$44.99
MidwayUSA Power Custom 1-Piece Barrel Mount Weaver-Style Base Ruger 10/22 Matte
+ $4.99 shipping
/power-custom-1piece/aH42yzvFZlKdynzzqo4JvA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These are quality aluminum bases from Power Custom that work with all Weaver-style rings. Please note that this base mounts to both the receiver and the barrel, and the barrel must be drilled and tapped to accept this base. Technical InformationStyle: Weaver Fits: Ruger 10/22 Material: Aluminum Notes: Requires drilling and tapping two holes in the barrel. For use with .920 diameter barrels. Attaches to both the factory receiver holes and the barrel.
More

Insta-Mount Scope Bases -...

$63.99
Brownells Insta-Mount Scope Bases - Ruger Mini-14 181 & Up Series (Weaver)
+ $7.95 shipping
/instamount-scope-bases/S4M4pQ6ZOSH5mF9SwgfZ7g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The BEST WAY to mount a scope on your ex-military rifle. WHY? No major alteration to your valuable firearm No drilling or tapping of the ultra hard receiver Do the work yourself Handsome ruggedness Guaranteed to hold zero Unmatched versatility Can be removed and/or reinstalled easily S&K Insta-Mounts are available in both S&K style (which include 1 Low Matte Rings) and Weaver rings style (Rings not included, base only). Mfg: S&K
More

Power Custom Ruger 10/22...

$59.99
MidwayUSA Power Custom Ruger 10/22 Barrel Pusher
+ $4.99 shipping
/power-custom-ruger-1022/mCGMQc1dG94SGT9gui4wNg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Power Custom barrel pusher for the Ruger 10/22 series of rifles allows you to safely remove a stubborn barrel without marring the receiver or disturbing any mounted optics. This barrel pusher will work with 17 Mach2, 22 Long Rifle, 17 HMR, and 22 WMR caliber rifles. The barrel pusher is operated simply by a 1/2 standard wrench or socket. The device fits into the receiver and uses a nylon block that pushes on the breech end of the barrel to push it out of the receiver without damage. Constructed of steel and finished with a black phosphate coating.
More

Harris #14 Bipod Adapter...

$24.99
MidwayUSA Harris #14 Bipod Adapter Ruger Mini-14 Black
+ $4.99 shipping
/harris-14-bipod-adapter/fkUR9CwSimY6SQp8oc3zOQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Ultra-light Harris Bipods are lightning quick and quality manufactured with heat treated steel and hard alloys. These adapters allow you to match any Harris Bipod to your favorite firearm. Adapter only, Bipods sold separately. Harris Bipod Adapters Material: Steel Application: Number 2 Flange Nut: Allows mounting of swivel stud on hollow synthetic forends. Flange is 5/8 wide by 1 3/8 long Number 2A 5/8 round head flange nut works well on Ruger Model 77 Synthetic stocks Number 2R Has radiused flange for mounting to wood fore-ends under magazines or gas tubes Number 3: For Remington Model 4, 74 and 7400 Number 4 Universal Barrel Mount: Requires 2 of clear barrel for mounting. Clamps to barrels from .550 to .812 Number 5 Stud: Fits AR-15 A2 handguards, sling swivel included Number 6 Stud:... Less
More

ProMag PM185 Ruger 10/22...

$27.99
Walmart.com ProMag PM185 Ruger 10/22 Carbine Barrel Band
+ $4.97 shipping
/promag-pm185-ruger-1022/sgjEJ2lXA89v4qC-gRcpYQ==/info
Walmart.com
IN_STOCK ( In stock )
The PM185 Ruger 10/22 Carbine Barrel Band is CNC-machined from T6 aircraft-grade aluminum, and type-III hard anodized. The barrel band is reversible. The Barrel band places a short MIL-STD 1913 Picatinny rail or a fixed loop to accept up to 1.25-inch slings on the left or right side of the carbine. The Barrel Band also places a short MIL-STD 1913 Picatinny rail on the bottom of the band.
More

Dewey Heavy Duty Muzzle Bore...

$13.49
MidwayUSA Dewey Heavy Duty Muzzle Bore Guide Ruger Mini-14 (Serial Numbers Not Beginning in 580)
+ $4.99 shipping
/dewey-heavy-duty-muzzle/iDrG-n3JNEesHIUK9r7SCg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
As the muzzle end of the barrel is the last place to see the exit of the bullet, it is important to keep this area free from harm. When placed over the muzzle, these guides allow cleaning rods to go straight into the barrel while protecting the muzzle area. The rod passes thru an oilite bushing which is pressed into the Delrin body. The Dewey Delrin Muzzle Bore Guides can be used with all types of cleaning rods. Some models have milled cuts to allow for sight clearance. Designed for the year-round shooter. Technical InformationSpecia l Note: Ruger made a change in the front sight and barrel band sometime in 2005, resulting in a larger band diameter. This bore guide will not fit these newer Mini-14 rifles. The new model is a Mini-14/5, series 580. Material: Delrin with Orelite bushing... Less
More

ProMag Ruger Mini-14 .223...

$24.99
Academy Sports and Outdoors ProMag Ruger Mini-14 .223 30-Round Magazine
+ $5.00 shipping
/promag-ruger-mini14-223/BgN4V-Jqkd1NhyWswGyjFw==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
ProMag Ruger Mini-14 .223 30-Round Magazine for sale from Academy Sports + Outdoors
More

Ruger 1 Extended Front Ring...

$34.99
MidwayUSA Ruger 1 Extended Front Ring Mount 4KO Silver Medium
+ $4.99 shipping
/ruger-1-extended-front/enFhcySMTRuWdA4vbulUvQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Weigand 1-Piece Weaver-Style...

$54.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger Mini-14, Mini-30, PC-9, PC-40, Deerfield with Integral Mounts Silver
+ $4.99 shipping
/weigand-1piece/fnE_OkVeBUBEgHyIH8zZWQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weigand Bases are constructed of durable, lightweight aluminum. These versatile bases easily allow your handgun or rifle to be equipped with optical sights. Accepts all Weaver-Style rings and accessories. Gunsmithing may be required. Won't fit older models without integral mounts.Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Ruger Mini 14 , Deerfield, Mini 30, PC-40, PC-9 (Only fits these models with integral mounts) Notes: Mounting Hardware Included
More

LaserLyte Ruger LCP Side...

$99.99
Academy Sports and Outdoors LaserLyte Ruger LCP Side Mount Laser
Free Shipping
/laserlyte-ruger-lcp-side/rsZtS2G7-sFECGHSGhk-QQ==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
Free Shipping
The LaserLyte Ruger LCP Side Mount Laser is compatible with the Ruger LCP and Kel-Tec .380 and .32 and features pulse and constant modes.
More

Ruger 77/22 Target Sear -...

$36.99
Brownells Ruger 77/22 Target Sear - 77/22 Target Sear
+ $7.95 shipping
/ruger-7722-target-sear/FPZhAJnFLfsftRybdULgLw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Drop-In For Crisp, Light, Trigger PullEasy to install Target Sear will reduce the trigger pull to approximately 1.5lbs. The target sear is wire EDM cut from hardened tool steel to eliminate any modification or fitting in most applications. Includes lighter trigger spring.? Mfg: Volquartsen
More

Ruger 1 Ring Mount 3BHM Matte...

$36.99
MidwayUSA Ruger 1 Ring Mount 3BHM Matte Low
+ $4.99 shipping
/ruger-1-ring-mount-3bhm/EvGHvSj85exJ0JLQfWG6Wg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube) Notes: This is one ring only.
More

Power Custom 1-Piece...

$22.60
MidwayUSA Power Custom 1-Piece Weaver-Style Base Ruger Mark II Silver
+ $4.99 shipping
/power-custom-1piece/DAgJ-suaJ-XYr4cIkQvrfQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Power Custom base fits factory drilled and tapped Ruger Mark 2 handguns. It is contoured and fits flush with the receiver. Weaver-style cross-slots allow better control of the position of the scope. Technical InformationMateri al: Aluminum Style: Weaver Fits: Ruger Mark II Notes: Multiple Slots to Allow for Precise Positioning of Rings Mounting hardware included. Color: Silver
More

Ruger 3 Padded Sling with...

$47.99
Groupon Ruger 3 Padded Sling with Thumb Loop Tan
Free Shipping
/ruger-3-padded-sling-with/yFG5DmNj6f04sfP5c7Txuw==/info
Groupon
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Ruger deluxe padded comfort sling with thumb loops is 3 inches wide and comes with swivels. The rifle sling is made of genuine leather and is suede lined. This Ruger rifle sling is comfortable and looks great on a deer rifle. It is adjustable from 31 inches-39 inches. Features the iconic Ruger logo.
More

Alex Pro Firearms .204 Ruger...

$929.99
Sportsman's Guide Alex Pro Firearms .204 Ruger Complete Upper Heavy-fluted 22 inch Barrel 14 inch Mod Quad
+ $19.99 shipping
/alex-pro-firearms-204/P6SbK1G7fEcexxXd9GO18A==/info
Sportsman's Guide
IN_STOCK ( In stock )
Alex Pro Firearms .204 Ruger Heavy-fluted 22 Barrel Complete Upper. It's all here! Specs: Model Number: UP-732 Model: AR-15 Caliber: .204 Ruger Type: .204 Barrel Manufacturer: ER Shaw / Dayton Barrel Length: 22, heavy-fluted Barrel Material: 416 stainless steel Match Barrel: Yes Barrel Twist: 1/12 Barrel Finish: Stainless steel Coating: Hard-coat anodized Free Float Barrel: Yes Muzzlebrake: N/A Gas System: Rifle-length BCG Type: M16 BCG Coating: Nickel-boron Upper Material: 7075 T6-forged Charging Handle: Mil.-specUSA made Order your Complete Upper today! Gender: Unisex.
More

Ruger 1 Ring Mount 3KHM...

$34.99
MidwayUSA Ruger 1 Ring Mount 3KHM Silver Matte Low
+ $4.99 shipping
/ruger-1-ring-mount-3khm/M0TgnomY8DIy7LcxANBbkQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube)
More

Ruger Mini 14 30 Accu-strut...

$79.95
eBay Ruger Mini 14 30 Accu-strut Barrel Stabilizer Blued Stainless Steel Socom 4 Usa
+ $3.99 shipping
/ruger-mini-14-30/mKhrJO5LkBN5xeEaWen7_w==/info
eBay
IN_STOCK ( In stock )
Accu-strut Socom in Blued Steel or Stainless Steel - $79.95 Accu-Strut SOCOM Barrel Strut Short barrel strut for Ruger 181-Present series rifles. Provides mechanical rigidity for thin carbine barrel, potentially reducing accuracy-killing vibrations. The 4-inch single-clamp configuration gives a good compromise between performance and lightweight, compact design. Improvement varies with individual rifle. In some cases there is no noticeable improvement in accuracy. The Socom model was developed
More

B-Square Base Ruger Mini-14...

$56.99
MidwayUSA B-Square Base Ruger Mini-14 Matte
+ $4.99 shipping
/bsquare-base-ruger/duh1TiMY8pxAsUiUcumbmQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
B-Square scope bases for sporting rifles require no gunsmithing, install in minutes and are constructed of high grade aluminum. The mount replaces your stock bolt stop cover plate with a threaded one, which allows a scope to be quickly and easily mounted to a rifle. There is also a front and rear alignment set screw used for locking down the mount tightly and adjusting your zero. Technical Information: Material: Aluminum Style: Standard dove-tail Notes Rings not included Fits 181 series and later Mini-14's
More

Ruger 10/22 Front Sight -...

$39.99
Brownells Ruger 10/22 Front Sight - Front Sight 10/22 Std Barrel
+ $7.95 shipping
/ruger-1022-front-sight/KK5s0crw90eztITbfFfGpg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Nodak spud front sight Allow 10/22 to have similar sight picture to military type rifles such as the AR-15/M16 Works with standard 10/22 barrels Uses SKS post secured w/ two 10-32 nylon tipped set screws Has wide range of elevation adjustment Works with a variety of receiver mounted 10/22 sights Requires a SKS/AK style sight adjustment tool for elevation adjustment Use with Ruger 10/22 Rear Sight w/Rail Mfg: Nodak Spud Llc
More

Weigand 1-Piece Weaver-Style...

$54.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger Mini-14, Mini-30, PC-9, PC-40, Deerfield with Integral Mounts Matte
+ $4.99 shipping
/weigand-1piece/wCdPg2VcIE3QBHziDjQLYA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weigand Bases are constructed of durable, lightweight aluminum. These versatile bases easily allow your handgun or rifle to be equipped with optical sights. Accepts all Weaver-Style rings and accessories. Gunsmithing may be required. Won't fit older models without integral mounts.Technical InformationMateri al: Aluminum Style: Weaver (cross-slot) Fits: Ruger Mini 14 , Deerfield, Mini 30, PC-40, PC-9 (Only fits these models with integral mounts) Notes: Mounting Hardware Included
More

Ruger Mini-14 Recoil & Hammer...

$11.99
Brownells Ruger Mini-14 Recoil & Hammer Spring - Mini-14 Recoil Spring
+ $7.95 shipping
/ruger-mini14-recoil/o4033qJPmLnHp8yy2msW_w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Extra-power springs fit Mini-14, -30, Ranch Rifle. Decreases lock time, improves reliability. Recoil spring fits guns with first three digits of serial number 181 and higher. Mfg: Wolff
More

Ruger Mini 14 30 Accu-strut...

$109.95
eBay Ruger Mini 14 30 Accu-strut Barrel Stabilizer Blued Stainless Steel Xdrill Usa
Free Shipping
/ruger-mini-14-30/kApB3VAOTj6H7Vf7HLF5nA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Accu-strut Xdrill in Blued Steel or Stainless Steel - $109.95 Barrel strut for Ruger 181-Present series rifles. Provides mechanical rigidity for thin carbine barrel, reducing accuracy-killing vibrations. The 6-inch 2-clamp configuration gives your best opportunity for performance increases. Typical improvement is 50-75% reduction in group size for earlier straight-barrel rifles, and up to 33% on the new tapered barrels. Your actual experience will vary.New super- lightweight version. Features cr
More

Weigand 1-Piece...

$54.99
MidwayUSA Weigand 1-Piece Picatinny-Style Scope Base Ruger Mini-14, Mini-30, PC-9, PC-40, Deerfield with Integral Mounts Matte
+ $4.99 shipping
/weigand-1piece/Cn-BERGV3S0WW04GQku-Sw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These Weigand Bases are similar to Weaver-style bases but built with Picatinny spacing dimensions. Constructed of durable, lightweight aluminum, this WEIG-A-TINNY™ style rail lets you mount mini or short length scopes as well as Aimpoint red dots withough permanent modifications. The WEIG-A-TINNY™ accepts all Weaver-style rings and accessories and accepts Most Picatinny rings and accessories. Technical Information Style: 1-Piece Base Type: Weaver (cross-slot) Material: Aluminum Finish:Matte Notes: 5 Long Weighs 2.6 oz Mounting Hardware Included
More

B-Square Ruger to...

$69.99
MidwayUSA B-Square Ruger to Weaver-Style Adapter (Weaver-Style Scope Base Only) Ruger 96/44, 77/22, 77/44, 77/ML, Mini-14 Ranch, Mini-30 Silver
+ $4.99 shipping
/bsquare-ruger-to/L6QyZHwPhW_HoxPhcZ8Ang==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Bases are designed to adapt the original base system to allow mounting of Weaver-style rings. Technical InformationMateri al: Aluminum Style: Weaver Notes: Works with Weaver-Style rings Mounting Hardware Included Also fits the Ruger 580 Ranch which is the Mini-14 whose serial number starts with 580
More

Dewey Heavy Duty Muzzle Bore...

$13.49
MidwayUSA Dewey Heavy Duty Muzzle Bore Guide Ruger 10/22 .920 Diameter Barrel
+ $4.99 shipping
/dewey-heavy-duty-muzzle/66Kast0e-inyM7FNaU3vbg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
As the muzzle end of the barrel is the last place to see the exit of the bullet, it is important to keep this area free from harm. When placed over the muzzle, these guides allow cleaning rods to go straight into the barrel while protecting the muzzle area. The rod passes thru an oilite bushing which is pressed into the Delrin body. The Dewey Delrin Muzzle Bore Guides can be used with all types of cleaning rods. Some models have milled cuts to allow for sight clearance. Designed for the year-round shooter. Technical InformationMateri al: Delrin with Orelite bushing Notes: Designed to keep cleaning rod centered in bore and protect the barrel crown when it is not possible to clean the firearm from the breech. Can be used with coated and non-coated cleaning rods. These guides are... Less
More

Ruger Mark Ii/ Mk Iii Scope...

$29.99
Brownells Ruger Mark Ii/ Mk Iii Scope Mount - Ruger Mk Ii & Mk Iii Weaver Style Scope Mount, Black
+ $7.95 shipping
/ruger-mark-ii-mk-iii/9G9p6alsr-sbOUSLcrDD2w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Lightweight, one-piece Weaver-style rail allows easy mounting of a red dot optic or reflex scope on your pistol. Seven cross-slots provide plenty of flexibility in positioning a variety of different-style optics. Secures to factory pre-drilled receiver holes with three, steel Allen head screws for a solid installation unaffected by recoil. Mfg: Volquartsen SPECS: Aluminum, hardcoat anodized, matte black or matte silver. 45/8 (24cm) long, 7/8 (2.2cm) wide, 5/16 (7.8mm) high. 1.8 oz. (51g) weight. Mounting screws included. Fits factory pre-drilled receivers on Ruger Mark II and Mark III pist
More

Ruger 10/22 Picatinny Scope...

$33.99
Brownells Ruger 10/22 Picatinny Scope Mount - 15 Moa Scope Mount
+ $7.95 shipping
/ruger-1022-picatinny/Ksbr-yAdANYADUkwX2dzhw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Precision CNC machined from lightweight, 6061 T6 aluminum with MIL-STD 1913 Picatinny rail pattern allows mounting a variety of sights. Easily accommodates different-length scope bodies and provides generous adjustment for eye relief. Drilled to fit the factory hole spacing and includes mounting screws. Accepts both Picatinny and Weaver-style rings. Hardcoat anodized for durability. Available with 0 MOA base, or 15 MOA base to help maintain your scope's full elevation adjustment range when shooting at long range. Mfg: Tactical Solutions, Llc SPECS: 6061 T6 aluminum, hardcoat anodized, black, matte finish. 4-5/8 (11.7cm) long, 13/16 (2.1cm) wide, 11/32 (8.7mm) high from top of receiver.
More

Ruger 10/22 Picatinny Scope...

$36.99
Brownells Ruger 10/22 Picatinny Scope Mount - 0 Moa Scope Mount
+ $7.95 shipping
/ruger-1022-picatinny/oAdqDs286-jF_h049EVRRA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Precision CNC machined from lightweight, 6061 T6 aluminum with MIL-STD 1913 Picatinny rail pattern allows mounting a variety of sights. Easily accommodates different-length scope bodies and provides generous adjustment for eye relief. Drilled to fit the factory hole spacing and includes mounting screws. Accepts both Picatinny and Weaver-style rings. Hardcoat anodized for durability. Available with 0 MOA base, or 15 MOA base to help maintain your scope's full elevation adjustment range when shooting at long range. Mfg: Tactical Solutions, Llc SPECS: 6061 T6 aluminum, hardcoat anodized, black, matte finish. 4-5/8 (11.7cm) long, 13/16 (2.1cm) wide, 11/32 (8.7mm) high from top of receiver.
More

Ruger 1 Ring Mount 3K Silver...

$37.99
MidwayUSA Ruger 1 Ring Mount 3K Silver Low
+ $4.99 shipping
/ruger-1-ring-mount-3k/X3P7w3Uv5LQ0nHIiA7qX8A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube)
More

EGW 1-Piece Picatinny-Style...

$44.99
MidwayUSA EGW 1-Piece Picatinny-Style 20 MOA Elevated Base Ruger 10/22 Matte
+ $4.99 shipping
/egw-1piece/E0nZ7Qsm-DFimOghjYCoLg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This high-quality elevated Picatinny-style base has 20 MOA built into it to allow zeroing at long distances. It is constructed of aluminum and includes mounting hardware. Technical Information Material: Aluminum Style: Picatinny Fits: Ruger 10/22 Length: 6 1/4 Notes: Mounting Hardware Included
More

Ross Leather Dual Position...

$54.99
MidwayUSA Ross Leather Dual Position Belt Holster Ruger Vaquero 5.5 Barrel Leather Tan
+ $4.99 shipping
/ross-leather-dual/bTS8xfORFEx7MD3OYXCciA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This holster features an extra belt slot to allow for either crossdraw or strong side carry. It is suede lined and has a thumb break and closed muzzle.Technical InformationNotes: Additional slot on back allows for strong side or crossdraw carry Thumb break Suede lining Closed muzzle design
More

Ruger 30mm Ring Mount 5B30HM...

$34.99
MidwayUSA Ruger 30mm Ring Mount 5B30HM Matte High
+ $4.99 shipping
/ruger-30mm-ring-mount/4OZ8EkXsMDZ2nTyQ-rwHiw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .550 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 4KTG...

$34.99
MidwayUSA Ruger 1 Ring Mount 4KTG Target Gray Medium
+ $4.99 shipping
/ruger-1-ring-mount-4ktg/jDPenahc_6SQN76n3XDrvw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube) Notes: This is 1 ring only, not a pair.
More

Lightweight Tactical Scope...

$39.99
Brownells Lightweight Tactical Scope Base - Ruger 10/22 0 Moa
+ $7.95 shipping
/lightweight-tactical/0cp4ioJFmLilF0das_Vpqw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Add the versatility of a one-piece Picatinny scope rail to your rifle or shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction and in many cases will not obstruct usage of factory iron sights. Some models available with 20 MOA built-in elevation to aid in long-range shooting without maxing out scope elevation adjustment. Drilled to fit the factory scope mount holes on the gun's receiver. Hex-head mounting screws and Mfg: Egw SPECS: Lightweight Tactical - 6061 T6 aluminum, anodized, matte black finish. Includes socket... Less
More

PTG Receiver Drilling Fixture...

$43.99
MidwayUSA PTG Receiver Drilling Fixture Ruger 10/22
+ $7.59 shipping
/ptg-receiver-drilling/MPpXaFQ1HsAKDnVvqGVIzQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This drilling jig permits cleaning a 10/22 from the rear without removing the barrel. It locates the correct spot on the rear of the receiver for a hole to be drilled that allows the cleaning rod to pass through. Helps keep the rifle accurate by eliminating damage done by the cleaning rod when inserted through the muzzle. Technical InformationNotes: 4 long, steel Locates cleaning hole location in receiver. Permits cleaning from the rear without barrel removal. Requires that a hole be drilled in the rear of the receiver. Instructions: Remove the two bolts and fiber washers from the fixture. The 10/22 receiver must be completely disassembled with all parts removed, however the barrel can stay in the receiver. The fixture mounts to the right side of the receiver. Use some suitable material... Less
More

Ruger Mini-14 Mini-Scout...

$129.99
Brownells Ruger Mini-14 Mini-Scout Mounts - Mini-Scout Mount 14 Pre-580 Series Ruger Mini-14
+ $7.95 shipping
/ruger-mini14-miniscout/riIbURx3Ucq_VMRdd61ECw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
This brainchild of Bill Ruger hails from the enduring designs of John C. Garand, and is one of the most popular utility rifles ever produced in the USA. Now you can upgrade yours to a scout format that will accept the latest technology available in modern sight systems, lasers, tactical flashlights, etc. The ORIGINAL Mini-Scout-Mount14 fits every serial number range manufactured prior to 2007 (before the 580 Series), including Ranch Rifles and AC556. These are Flat Black . The Mini-Scout-MountII I will fit all three caliber versions of the 580 and up series (.223, 6.8spc, and 7.62x39) with the heavier flanged barrel. It will also fit the Target Models with barre Mfg: Amega Ranges, Inc. SPECS: Aluminum, hardcoat anodized finish, matte black. Original Mini-14 fits pre-580 series rifles... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.eap-30212
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.eap-30212