Category

Optics Accessories
Showing results for "ruger barrel"
Results 1 - 40 of 1500+

Power Custom 1-Piece Barrel...

$44.99
MidwayUSA Power Custom 1-Piece Barrel Mount Weaver-Style Base Ruger 10/22 Matte
+ $4.99 shipping
/power-custom-1piece/aH42yzvFZlKdynzzqo4JvA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These are quality aluminum bases from Power Custom that work with all Weaver-style rings. Please note that this base mounts to both the receiver and the barrel, and the barrel must be drilled and tapped to accept this base. Technical InformationStyle: Weaver Fits: Ruger 10/22 Material: Aluminum Notes: Requires drilling and tapping two holes in the barrel. For use with .920 diameter barrels. Attaches to both the factory receiver holes and the barrel.
More

Volquartsen 1-Piece Barrel...

$32.99
MidwayUSA Volquartsen 1-Piece Barrel Mount Weaver-Style Base Ruger 10/22 Silver
+ $4.99 shipping
/volquartsen-1piece/HmPp5XUpL3xUF110BebkpA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This cantilever-style barrel-mounted base drops-in on all Volquartsen Ruger 10/22 barrels. The scope is mounted to the barrel rather than to the flexible alloy receiver. It is the ultimate scope mounting system for a Ruger 10/22. Uses Weaver-Style rings. May be adapted to other barrels by drilling and tapping the barrel.Technical InformationMateri al: Aluminum Style: Weaver Fits: Volquartsen 10/22 barrels of .920 diameter Will fit other .920 barrels, but requires drilling and tapping barrel Gunsmithing Required:No for Volquartsen barrels Notes: The mount is equipped with supporting set screw to eliminate flex found in most other barrel mounts The mount extends all the way back over the recevier to facilitate any necessary scope adjustments Mounting hardware included Includes 2 8-32 x 1/4... Less
More

Volquartsen 1-Piece Barrel...

$32.99
MidwayUSA Volquartsen 1-Piece Barrel Mount Weaver-Style Base Ruger 10/22 Matte
+ $4.99 shipping
/volquartsen-1piece/vmIhSUdms8IEoGy_eRAv9g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This cantilever-style barrel-mounted base drops-in on all Volquartsen Ruger 10/22 barrels. The scope is mounted to the barrel rather than to the flexible alloy receiver. It is the ultimate scope mounting system for a Ruger 10/22. Uses Weaver-Style rings. May be adapted to other barrels by drilling and tapping the barrel.Technical InformationMateri al: Aluminum Style: Weaver Fits: Volquartsen 10/22 barrels of .920 diameter Will fit other .920 barrels, but requires drilling and tapping barrel Gunsmithing Required:No for Volquartsen barrels Notes: The mount is equipped with supporting set screw to eliminate flex found in most other barrel mounts The mount extends all the way back over the recevier to facilitate any necessary scope adjustments Mounting hardware included Includes 2 8-32 x 1/4... Less
More

Power Custom 1-Piece Barrel...

$44.99
MidwayUSA Power Custom 1-Piece Barrel Mount Weaver-Style Base Ruger 10/22 Matte
+ $4.99 shipping
/power-custom-1piece/aH42yzvFZlKdynzzqo4JvA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These are quality aluminum bases from Power Custom that work with all Weaver-style rings. Please note that this base mounts to both the receiver and the barrel, and the barrel must be drilled and tapped to accept this base. Technical InformationStyle: Weaver Fits: Ruger 10/22 Material: Aluminum Notes: Requires drilling and tapping two holes in the barrel. For use with .920 diameter barrels. Attaches to both the factory receiver holes and the barrel.
More

Weigand 1-Piece Weaver-Style...

$54.99
MidwayUSA Weigand 1-Piece Weaver-Style Scope Base Ruger Redhawk with Integral Scope Mounting Notches Machined in Barrel Silver
+ $4.99 shipping
/weigand-1piece/djH-M5E4HnI5zGCwKW_dlg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Weigand Ruger Redhawk mount is constructed of a lightweight aluminum and is a non drill and tap mount. This base is designed for old and new models that have factory scope ring cuts in the barrel of the pistol and accepts weaver-style rings and most picatinny-style rings. Technical Information Material: Aluminum Style: Weaver (cross-slot) Fits: Ruger Redhawks with Ruger scope ring cuts on the barrel Notes: Mounting Hardware Included This is a base only
More

Power Custom Barrel Wrench...

$39.99
MidwayUSA Power Custom Barrel Wrench Insert Ruger Mini 14
+ $4.99 shipping
/power-custom-barrel/Jc-14ssfmcw2nKMphsdf6A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Power Custom Barrel Wrench Insert works with the action wrench handle to aid in removing your barrel. Fully CNC'd from Billet Aluminum.
More

Tactical Solutions 1-Piece...

$29.99
MidwayUSA Tactical Solutions 1-Piece Picatinny-Style 15 MOA Elevated Base Ruger 10/22 Black
+ $4.99 shipping
/tactical-solutions/YNz_PcNENf7a-1Hv2S6eMQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Tactical Solutions 15 MOA 10/22 Scope Rail is perfect for mounting your optics on your 10/22 for traditional as well as long range .22LR shooting. Tactical Solutions 15 MOA scope rail will help compensate for any barrel drop as well as provide the shooter enough adjustment for long range shooting. Our precision machined aluminum scope rail will accommodate any Picatinny/Weaver- style scope rings and comes with four mounting screws. Length is 4.6. Techncial Information Material: Aluminum Style: Picatinny Fits: Ruger 10/22
More

Ruger #1 Accurizer

$56.99
Brownells Ruger #1 Accurizer
+ $7.95 shipping
/ruger-1-accurizer/14cvhBeyu55iPODNuEfQVA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Stabilizes the barrel to prevent point of impact shift as barrel heats up. Steel bedding block attaches to receiver extension and gives you an adjustable tensioning screw to regulate barrel movement. Only minor inletting of the forearm required. Mfg: E. Arthur Brown Company, Inc. SPECS: Steel, blue finish. 1.28 (3.2cm) long, .74 (18.9mm) wide, .51 (13.2mm) high. Includes instructions.
More

Weigand 1-Piece Weaver-Style...

$69.99
MidwayUSA Weigand 1-Piece Weaver-Style Full-Length Scope Base Ruger Redhawk 7-1/2 Matte
+ $4.99 shipping
/weigand-1piece/RR5jq0MwcB36BM8Wa4F4VQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This Weaver-style scope base features multiple cross-slots for positioning of optics and requires no drilling or tapping for installation. Technical InformationNotes: Mounting system uses a front sight replacement block, allows attaching the front of the mount with no alterations to the revolver Attaches at the rear sight elevation hole and uses the rear sight notch as a recoil lug Multiple cross-slots for optic positioning Accepts all Weaver-style rings and accessories Designed for 7.5 barrel Weighs 3.1 oz This mount requires no drilling and tapping for installation
More

Weigand 1-Piece Weaver-Style...

$69.99
MidwayUSA Weigand 1-Piece Weaver-Style Full-Length Scope Base Ruger Redhawk 7-1/2 Silver
+ $4.99 shipping
/weigand-1piece/ucoj11aF6_CVJyoko54FyQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This Weaver-style scope base features multiple cross-slots for positioning of optics and requires no drilling or tapping for installation. Technical InformationNotes: Mounting system uses a front sight replacement block, allows attaching the front of the mount with no alterations to the revolver Attaches at the rear sight elevation hole and uses the rear sight notch as a recoil lug Multiple cross-slots for optic positioning Accepts all Weaver-style rings and accessories Designed for 7.5 barrel Weighs 3.1 oz This mount requires no drilling and tapping for installation
More

PTG Receiver Drilling Fixture...

$43.99
MidwayUSA PTG Receiver Drilling Fixture Ruger 10/22
+ $7.59 shipping
/ptg-receiver-drilling/MPpXaFQ1HsAKDnVvqGVIzQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This drilling jig permits cleaning a 10/22 from the rear without removing the barrel. It locates the correct spot on the rear of the receiver for a hole to be drilled that allows the cleaning rod to pass through. Helps keep the rifle accurate by eliminating damage done by the cleaning rod when inserted through the muzzle. Technical InformationNotes: 4 long, steel Locates cleaning hole location in receiver. Permits cleaning from the rear without barrel removal. Requires that a hole be drilled in the rear of the receiver. Instructions: Remove the two bolts and fiber washers from the fixture. The 10/22 receiver must be completely disassembled with all parts removed, however the barrel can stay in the receiver. The fixture mounts to the right side of the receiver. Use some suitable material... Less
More

Ruger 1 Ring Mount 5K Silver...

$37.99
MidwayUSA Ruger 1 Ring Mount 5K Silver High
+ $4.99 shipping
/ruger-1-ring-mount-5k/24o5TNTWkioCuxK-Ho0nJQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .550 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 3B Gloss...

$34.99
MidwayUSA Ruger 1 Ring Mount 3B Gloss Low
+ $4.99 shipping
/ruger-1-ring-mount-3b/Qu4e6U8D8JPXH9Rm0JJ4fg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 5B30...

$34.99
MidwayUSA Ruger 30mm Ring Mount 5B30 Gloss High
+ $4.99 shipping
/ruger-30mm-ring-mount/SBXwM3_x-rIfXoB-EmICwA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .550 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 3K Silver...

$37.99
MidwayUSA Ruger 1 Ring Mount 3K Silver Low
+ $4.99 shipping
/ruger-1-ring-mount-3k/X3P7w3Uv5LQ0nHIiA7qX8A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 6B30...

$34.99
MidwayUSA Ruger 30mm Ring Mount 6B30 Gloss Extra-High
+ $4.99 shipping
/ruger-30mm-ring-mount/d3WaURoiCvpU0klFDhzhZA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .700 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Extended Front Ring...

$34.99
MidwayUSA Ruger 1 Extended Front Ring Mount 4KO Silver Medium
+ $4.99 shipping
/ruger-1-extended-front/enFhcySMTRuWdA4vbulUvQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 4B Gloss...

$36.99
MidwayUSA Ruger 1 Ring Mount 4B Gloss Medium
+ $4.99 shipping
/ruger-1-ring-mount-4b/fd36gW1oP6gFUbRNd-tJSg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .43 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 4B30...

$37.99
MidwayUSA Ruger 30mm Ring Mount 4B30 Gloss Medium
+ $4.99 shipping
/ruger-30mm-ring-mount/iTU7V-IxBi6d865A90SGAw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical Information Material: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 4K Silver...

$37.99
MidwayUSA Ruger 1 Ring Mount 4K Silver Medium
+ $4.99 shipping
/ruger-1-ring-mount-4k/WaxcTrFC7dQymDBvJmZCrw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 10/22 Barrel Band Sling...

$21.95
eBay Ruger 10/22 Barrel Band Sling Swivel 1022 Mount/ Matte Stainless/black
Free Shipping
/ruger-1022-barrel-band/L4yyqVunoJKcc3h4raFc7Q==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Ruger 10/22 BARREL BAND SLING SWIVEL MADE IN THE USA These are for wood stocks and will not fit factory synthetic sporter stocks unless they are shimmed. will not fit 10/22 takedown model This steel swivel set replaces the alloy factory one. It gives you the option of mounting the sling on the bottom or side of the rifle. Constructed of steel Matte STAINLESS Steel Finish Or Blued /W rear BLUED SWIVEL and Stainless swivel stud Installation instructions included Swivels are for 1 inch slings Ple
More

Ruger 1 Ring Mount 5BHM Matte...

$34.99
MidwayUSA Ruger 1 Ring Mount 5BHM Matte High
+ $4.99 shipping
/ruger-1-ring-mount-5bhm/2VOsAX5xP_SA_MmCYUdFlA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .550 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 6B30HM...

$37.99
MidwayUSA Ruger 30mm Ring Mount 6B30HM Matte Extra-High
+ $4.99 shipping
/ruger-30mm-ring-mount/397MHO7nI1bUCXLuR9wqzg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .700 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 5B30HM...

$34.99
MidwayUSA Ruger 30mm Ring Mount 5B30HM Matte High
+ $4.99 shipping
/ruger-30mm-ring-mount/4OZ8EkXsMDZ2nTyQ-rwHiw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .550 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 4B30HM...

$36.99
MidwayUSA Ruger 30mm Ring Mount 4B30HM Matte Medium
+ $4.99 shipping
/ruger-30mm-ring-mount/BNSp3P2si3EDwkOeaoR-Gg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 4BHM Matte...

$34.99
MidwayUSA Ruger 1 Ring Mount 4BHM Matte Medium
+ $4.99 shipping
/ruger-1-ring-mount-4bhm/EQzLHgK0APZ3NT9_5xdSgQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 3BHM Matte...

$36.99
MidwayUSA Ruger 1 Ring Mount 3BHM Matte Low
+ $4.99 shipping
/ruger-1-ring-mount-3bhm/EvGHvSj85exJ0JLQfWG6Wg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube) Notes: This is one ring only.
More

Ruger 1 Ring Mount 3KHM...

$34.99
MidwayUSA Ruger 1 Ring Mount 3KHM Silver Matte Low
+ $4.99 shipping
/ruger-1-ring-mount-3khm/M0TgnomY8DIy7LcxANBbkQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .300 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 4K30TG...

$37.99
MidwayUSA Ruger 30mm Ring Mount 4K30TG Target Gray Medium
+ $4.99 shipping
/ruger-30mm-ring-mount/ORBeKlpLax2ZLMh47GjNCg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 4KHM...

$36.99
MidwayUSA Ruger 1 Ring Mount 4KHM Silver Matte Medium
+ $4.99 shipping
/ruger-1-ring-mount-4khm/QqV7UqBI6deCKk24Sq8Ymw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 5KTG...

$37.99
MidwayUSA Ruger 1 Ring Mount 5KTG Target Gray High
+ $4.99 shipping
/ruger-1-ring-mount-5ktg/a6X10Zaa4_hsKU3vxfk9TA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .550 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 4K30...

$37.99
MidwayUSA Ruger 30mm Ring Mount 4K30 Silver Medium
+ $4.99 shipping
/ruger-30mm-ring-mount/bzJb2I51yxsUVAB6OTDarQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 4KTG...

$34.99
MidwayUSA Ruger 1 Ring Mount 4KTG Target Gray Medium
+ $4.99 shipping
/ruger-1-ring-mount-4ktg/jDPenahc_6SQN76n3XDrvw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube) Notes: This is 1 ring only, not a pair.
More

Ruger 30mm Ring Mount 4K30HM...

$34.99
MidwayUSA Ruger 30mm Ring Mount 4K30HM Silver Matte Medium
+ $4.99 shipping
/ruger-30mm-ring-mount/sq4mGDwrKXmlhXpiBT0l3g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .500 (measured from base of ring to bottom of scope tube)
More

Ruger 30mm Ring Mount 5K30TG...

$34.99
MidwayUSA Ruger 30mm Ring Mount 5K30TG Target Gray High
+ $4.99 shipping
/ruger-30mm-ring-mount/zfErQnPL4N8UCjgMhLGbcw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .550 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 6KHM...

$37.99
MidwayUSA Ruger 1 Ring Mount 6KHM Silver Matte Extra-High
+ $4.99 shipping
/ruger-1-ring-mount-6khm/zgRTHnCGLW2YKEDM_SqcbQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .700 (measured from base of ring to bottom of scope tube)
More

Ruger 1 Ring Mount 5KHM...

$34.99
MidwayUSA Ruger 1 Ring Mount 5KHM Silver Matte High
+ $4.99 shipping
/ruger-1-ring-mount-5khm/lWMmkv_Zxmmg8ODGjSwjRQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a single Ruger factory replacement steel ring mount. Note: For Super Redhawk applications a #3 & #4 equates to a low set, a #4 & #5 is a medium and a #5 & #6 is a high set. Technical InformationMateri al: Steel Style: Ruger Ring Height: .550 (measured from base of ring to bottom of scope tube)
More

Talley 1 Ring Mounts Ruger...

$39.99
MidwayUSA Talley 1 Ring Mounts Ruger American Rimfire Matte Low
+ $4.99 shipping
/talley-1-ring-mounts/wcTL1yxrK2E85eDzofJeTg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
CNC machined with the same exacting quality control as the Quick Detachable, this ring is built for the shooter who prefers the sleek profile of a non-detachable vertically split ring. Using larger screws and no moving parts, this system will stand up to the most punishing magnum. Stainless Steel. Technical Information Material: Steel Height Low: 0.300 Medium: 0.400 High: 0.500 Extra-High: 0.700 Mounting hardware included. Ring Height Selection (per Talley) Low for scopes up to 44mm objective with standard barrel contour Medium for scopes up to 50mm objective with standard barrel contour High for scopes with a 56mm objective with standard barrel contour Extra-High for large objective scopes with heavy contour barrels and single shot rifles
More

Talley 1 Ring Mounts Ruger...

$39.99
MidwayUSA Talley 1 Ring Mounts Ruger American Rimfire Matte High
+ $4.99 shipping
/talley-1-ring-mounts/yOcnkkuRUAChFTQzsf5V6Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
CNC machined with the same exacting quality control as the Quick Detachable, this ring is built for the shooter who prefers the sleek profile of a non-detachable vertically split ring. Using larger screws and no moving parts, this system will stand up to the most punishing magnum. Stainless Steel. Technical Information Material: Steel Height Low: 0.300 Medium: 0.400 High: 0.500 Extra-High: 0.700 Mounting hardware included. Ring Height Selection (per Talley) Low for scopes up to 44mm objective with standard barrel contour Medium for scopes up to 50mm objective with standard barrel contour High for scopes with a 56mm objective with standard barrel contour Extra-High for large objective scopes with heavy contour barrels and single shot rifles
More

Dual Rail Barrel Mount For...

$12.79
eBay Dual Rail Barrel Mount For Tactical Accessories Fits Ruger 10/22 77/22 Rifles
Free Shipping
/dual-rail-barrel-mount/xHZqaMfKM1zKHNp9ZAikWQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Untitled Document This is a Tactical Universal Fit Dual Rail Barrel Mount Clamp For Attaching Small Accessories This Item Fits Ruger 10/22 77/22 Rifles ( Part# AM-MT014 )!! Free Domestic shipping within the USA !! Brand New Manufacture warranty against defects Material Aluminum Color Black Manufacture Imported Specifications Matte Black Color, Made from aluminum, Clamps directly to the barrel of most rifles with an external diameter between 1/2 - 3/4, Provides two short Weaver style rails for
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335